Chapter 8 - Wendy's Restaurant - Specifications
change order
A ___ is the formal, legal process authorizing any changes in location, layout, size, construction methods, or materials.
punch
A formal list of construction deficiencies is referred to as a(n) ____________________ list.
65
A minimum indoor temperature of ____________________°F must be maintained during painting.
50
A minimum temperature of ___°F should be maintained during tile work and for seven days thereafter.
reinforcing
All ____________________ for footings must be unpainted and uncoated.
30
All masonry work must cease when the temperature drops below ____________________°F.
True
All storm and sanitary sewer work is the responsibility of the general contractor.
five
Based on the Americans with Disabilities Act (ADA) New Construction Checklist, ____________________ accessible parking spaces are required if the parking lot contains 140 parking spaces.
6
Flashing should be lapped a minimum of ___".
Division 9-Finishes
Information regarding floor tile and wall covering is included in ___.
Division 7-Thermal and Moisture Protection
Information regarding insulation, flashing, and roofing is included in ___.
Division 15-Mechanical
Information regarding plumbing, heating, and ventilation is included in ___.
5
Per ADA requirements, the clear and level landing area at each accessible entrance is ____________________' square.
48
Per ADA requirements, the maximum highest operable part of restroom accessories is ____________________".
True
Portable fire extinguishers are sized by the local fire control authority.
True
Substitutes are not acceptable for the hood fire suppression system specified.
50
The 2014 edition of the MasterFormat contains ___ divisions.
True
The contractor is responsible in the event of loss or damage to adjacent property during construction.
False
The contractor shall provide certificates of insurance for Workers' Compensation and automobile liability coverage.
True
The owner can stop construction work at any time for testing and special inspections.
24" × 34"
The pick-up window unit has a ___ active light.
False
Toilet and urinal partitions are manufactured by American Standard.
Four
___ handicap-accessible parking spaces are required when 85 parking spaces are specified for the parking lot.
Shop
____________________ drawings are required for ordering, manufacturing, and final inspection of the roofing system.
Footing
____________________ excavations must be on undisturbed earth.