CTS 120 Test 3
You buy a new hard disk drive and install the Linux operating system. You later decide you prefer the Windows operating system so you install it instead. Before you installed either one of the two operating systems, the hard drive had sector markings that allowed you to install the operating system of your choice. What facilitated this capability? Partitioning Sector provisioning
(not boot sector)
Gwen recently purchased a new video card, and after she installed it, she realized she did not have the correct connections and was not able to power the video card. What connector(s) should Gwen look for when purchasing a new power supply? (Select all that apply.)
8-pin PCI-E connector 6-pin PCI-E connector
You decide to add three new hard drives to your computer so that you can increase the amount of storage on it. When you install the hard drives, you find enough SATA connections on the motherboard, but it is short one SATA power connector. What is the easiest way to add a SATA power connector to the system? Use the Molex connector.
Add a SATA power Y splitter.
Your friend has compiled a moderate collection of movies they have bought over the years. They all reside on a media server they assembled with remote access capabilities. They would like to have a physical copy of each movie on optical media for off-site storage. Most of the movies consume between 60 and 120 GB of storage. What type of optical storage media should they use to back up the movies? Select two.
BD-R TLBD-R QL
You are troubleshooting a serious issue for a friend because their computer does not boot up properly. What method should be employed to ensure the user's data is protected?
Connect the drive to another computer and copy the data to another storage media.
You bought a new computer with two case fans that constantly run a little loud. However, right out of the box, you notice the system is exhibiting intermittent problems. You go into the BIOS and observe the CPU temperature is 100 degrees Fahrenheit (38 degrees Celsius). Which of the following best describes the thought process you should employ in your troubleshooting efforts? Consider whether the case fans are working properly, and if the system air flow is adequate.
Consider troubleshooting issues and possibilities that are not necessarily related to cooling.
Delonte has been using his computer at work every day for two years with no problems. The nature of his work requires him to frequently create and delete test files of different types and sizes. However, he is starting to notice that his computer is slowing down.
Defrag and Optimization tool
Rebecca completed work on a computer and is verifying the functionality of the system when she finds a new problem. This problem is not urgent and can be easily fixed. The policy at Rebecca's company is that all problems need to be reported and given a priority code before they can be assigned to someone. What should Rebecca do about this new problem?
Determine whether fixing the first problem cause the second problem.
A system has been having intermittent problems. Miya decides to measure the output voltage of the power supply. The voltage exceeds the expected value by an unreasonable amount.
Excessive voltage will damage the motherboard.
You recently installed a new RAID controller card in a PCIe expansion slot on your computer. After setting up the controller, you transfer data from the backup you created over to the computer. When you finish the setup, you turn the computer off and return it to its normal location. When you turn the computer on, you immediately receive the error message, "RAID not found." What might be the problem?
Expansion card failed or became unseated.
You and a friend decide to watch a movie on your computer. The movie is saved on a second hard drive on your system. When you are ready to watch the movie, you can't find it on your computer. You try to locate the second hard drive, and it is no longer listed in Windows. What might be the problem with the movie and the hard drive?
Hard drive has crashed.
William has been working on a problem with a computer at his company for several hours and still can't ascertain the problem. The computer will not turn on, and William has tried everything he can think of to fix the computer. He has replaced the power cord, the power supply, and even the power strip the computer is plugged into. William decides that it must be the motherboard and takes the computer to his shop to replace the motherboard on the computer. When he plugs the computer in, it turns on. The problem was not the computer-someone had turned off the switch for the wall outlet that the power strip was plugged into. At which step in the troubleshooting process could William have discovered this problem? (Select all that apply.)
Identify the problem, Test the theory to determine cause, and Establish a theory of probably cause. He should have checked the wall socket.
Leroy buys three identical 2 TB SSDs to implement a fault tolerant RAID configuration. He configures RAID 1 using the three disks, and later discover that the total storage is only 2 TB. What alternative, if any, does Leroy have?
Implement RAID 5
When you verify a fix, you determine that the problem could have been prevented. What should you do to help the user avoid having the same problem again?
Instruct the user on how to prevent the problem.
Johan is a hard drive performance engineer working at a major storage device manufacturer. He needs to measure, record, and analyze the throughput, IOPS, and the latency of the different models of drives the company produces. What is the difference between these three parameters? Select three.
Latency measures the time required to process a data request or a transaction. IOPS measures the number of read or write operations performed in one second. Throughput is the amount of data flow through a point in the data path in one second.
Devon would like to install a new hard drive on his computer. Because he does not have a SATA port available on his motherboard, he has decided to purchase a NVME SSD hard drive. How can Devon attach a NVME device to his computer? (Select all that apply.)
M.2 slot on the motherboard U.2 port on the motherboard PCIe expansion card
George is involved with a project at work. Over the last few weeks, he has noticed a gradual but significant degradation in performance when running his AutoCAD program. He calls the technician and asks him to check his computer. The technician tells George to reboot the computer and asks George how much RAM was detected. The amount of RAM reported is exactly as expected. What hardware could be causing this problem? Select two.
Motherboard RAM
While working on your computer, you receive the POST error, "Drive Not Recognized." You check your SATA cable to see if it is the problem, and it tests fine. You remove the hard drive and test it in a computer system known to be in good working condition and find that the hard drive is working. You can move data and check to make sure the OS files are not corrupt. You use a power supply tester to see if the voltage for the SATA power connection is correct, and the test shows the power is correct. You even check BIOS to make sure the hard drive can be recognized and find that all settings in BIOS are at default, so the system should recognize the hard drive. What might be the problem with your hard drive system?
Motherboard SATA port has gone bad.
You are installing a new hard drive in a system in which the hard drive will run at 6.0 Gbps. What can you use to determine whether the SATA port number into which you are connecting the drive will also run at 6.0 Gbps? All ports are standard.
Motherboard manual.
You have an eight-year-old computer with all the original components still in place. The power supply fan seems to be going bad, so you start troubleshooting. You replace the power supply, but the fan continues to have the same problem. You then disconnect all the other components except the motherboard. Only under this condition does the fan works as expected. Which of the following is most likely to be true?
One of the other components was causing a short and drawing too much power.
Your computer system loses power while you are working on a project for a very important client. When the computer restarts, you hear continuous short beeps coming from your computer, and the monitor is showing no signal. What do the beeps mean?
POST has failed, and you should research the BIOS beep codes.
Keion works as a freelancer creating websites and designing logos for clients. He recently had a hard drive failure and lost work for a client, and he would like to prevent the same type of problem from happening again. Keion does not want to rely on a backup but would like a way to ensure that his data is safe on his computer. You recommend that he create a RAID array that will provide fault tolerance and not suffer data loss if one drive fails. What RAID configuration should you recommend to Keion?
RAID 1
Lin is booting up his computer. Sometimes during the boot process, the computer will shut down, but more often than not it will reboot on its own or simply freeze. He thinks the problem could be due to an intermittent undervoltage problem with the power supply, so he uses a power supply tester. The test shows that the power supply is functioning properly. What should Lin check next in the troubleshooting process?
RAM
While you are working on your computer, it shuts down unexpectedly, and you detect a burning smell. When you remove the case cover, you notice a distended capacitor. What can you do to fix this problem?
Replace the motherboard.
Sara works in the IT department for a large retail store. She has been testing a theory about why an error message keeps popping up on a coworker's computer when they try to start Windows. She has hit a wall and doesn't know where to look next. Sara feels very frustrated with the problem. What should Sara do to help work out the solution?
Research the problem on the Internet.
Juridia buys new a 16 GB flash drive, she takes it out of the package, and tries to copy an 8 GB file to it. However, the operation fails with an error message indicating the file is too large. Which of the following statements are most likely to be true? Select two.
The flash drive needs to be reformatted with the NTFS or exFAT file system. The flash drive has the FAT32 file system, which supports files up to 4 GB in size.
Abdel, an electrician, does not know much about computers so he orders a custom computer with a 1000 W power supply. However, the maximum wattage the system needs is 500 W. Which of the following statements are true? Select two
The power supply will only deliver up to 500 W of power and operate very efficiently. The 1000 W power supply will last longer than, for example, a 750 W power supply.
Your laptop at home is exhibiting intermittent problems and you suspect it could be related to power. How can you verify the power adapter is supplying the proper voltage?
Use a multimeter. Place the red probe of the multimeter in the center of the DC connector and the black probe on the outside cylinder.
Cirrus was hired to start a multimedia group at a major corporation. He has been asked to buy high-end equipment to ensure it will not be obsolete in three or four years. He buys a video camera capable of recording 8 MB/sec. What type of SD memory card should he use in the camera?
V10
James added a new video card and needs to get a power supply that will have enough power to run the new card. When researching the new power supply, what feature does James need to look for to make sure he has enough power to run his computer with the new video card?
Wattage