CTS2303 - Knowledge Check 4A - Manage IP Addressing - TestOut

Ace your homework & exams now with Quizwiz!

100.55.255.255

A host has an address of 100.55.177.99/16. Which of the following is the broadcast address for the subnet?

The client system is unable to reach the DHCP server., & The client system is configured to use DHCP.

After you install a new DHCP server on your network, you need to verify that the network devices are receiving IP addressing via DHCP. You reboot a Windows 10 client system and, using the ipconfig /all command, receive the following information: Ethernet adapter Local Area Connection 1:Description . . . . . . . . . . . : Intel(R) Ethernet ConnectionPhysical Address. . . . . . . . . : 02-00-4C-4F-3F-50DHCP Enabled. . . . . . . . . . . : YesAutoconfiguration Enabled . . . . : YesAutoconfiguration IPv4 Address. . : 169.254.25.129Subnet Mask . . . . . . . . . . . : 255.255.0.0Default Gateway . . . . . . . . . :DNS Servers . . . . . . . . . . . : Which of the following statements are true? (Select two).

At fifty percent

At what percentage of the device's lease time does the DHCP renewal process occur?

2001:6789:9078::ABCE:AFFF:FE98:0001 = Global unicast FD00::8907:FF:FE76:ABC = Unique local FEA0::AB89:9FF:FE77:1234 = Link-local FF00:98BD:6532::1 = Multicast FF02::1:2 = Multicast

Based on the address prefix for each IPv6 address on the right, identify the address type from the list on the left. (Addresses may not represent actual addresses used in production.)

Global routing prefix = FD01:0001:0001:005 Subnet ID = :005 Interface ID = ::7 Prefix length = /64 Global ID = nothing Unique local unicast prefix = FD

Consider the following IPv6 address: FD01:0001:0001:005::7/64 Drag the component parts of this address on the left to the corresponding descriptions on the right. (Not all descriptions on the right have corresponding components on the left.)

FE80:0000:0000:0055::000A:AB00, & FE80::55:0000:0000:A:AB00

Consider the following IPv6 address: FE80:0000:0000:0055:0000:0000:000A:AB00 Which of the following are valid shortened forms of this address? (Select two.)

255.0.0.0 = 11111111.00000000.00000000.00000000 255.255.255.128 = 11111111.11111111.11111111.10000000 255.224.0.0 = 11111111.11100000.00000000.00000000 255.255.0.0 = 11111111.11111111.00000000.00000000 255.255.255.252 = 11111111.11111111.11111111.11111100

Drag each binary subnet mask on the left to its appropriate decimal equivalent on the right.

You must configure the clients to obtain IP addressing from a DHCP server.

Due to wide network expansion, you've decided to upgrade your network by configuring a DHCP server. The network uses Linux, Windows, and Mac OS X client systems. You configure the server to distribute IP addresses from 192.168.2.1 to 192.168.2.100. You use the subnet mask of 255.255.255.0. After you make all the setting changes on the DHCP server, you reboot each client system, but they are not able to obtain an IP address from the DHCP server. Which of the following explains the failure?

The clients must be configured to obtain IP addressing from a DHCP server.

Due to widespread network expansion, you have decided to upgrade the network by configuring a DHCP server. The network uses Linux, Windows, and Mac OS X client systems. You configure the server to distribute IP addresses from 192.168.2.1 to 192.168.2.100. You use the subnet mask of 255.255.255.0. After making all setting changes on the DHCP server, you reboot each client system, but none is able to obtain an IP address from the DHCP server. Which of the following options explains the failure?

ping

Examine the following output: Reply from 64.78.193.84: bytes=32 time=86ms TTL=115Reply from 64.78.193.84: bytes=32 time=43ms TTL=115Reply from 64.78.193.84: bytes=32 time=44ms TTL=115Reply from 64.78.193.84: bytes=32 time=47ms TTL=115Reply from 64.78.193.84: bytes=32 time=44ms TTL=115Reply from 64.78.193.84: bytes=32 time=44ms TTL=115Reply from 64.78.193.84: bytes=32 time=73ms TTL=115Reply from 64.78.193.84: bytes=32 time=46ms TTL=115 Which of the following utilities produced this output?

11 = 17 B = 11 D = 13 F = 15 C = 12 10 = 16

Match each decimal value on the left with the corresponding hexadecimal value on the right. Not all decimal values have a corresponding hexadecimal value.

Static full assignment = The entire 128-bit address and all other configuration information is statically assigned to the host. Static partial assignment = The prefix is statically assigned, and the interface ID is derived from the MAC address. Stateless autoconfiguration = Clients automatically generate the interface ID and learn the subnet prefix and default gateway through Neighbor Discovery Protocol (NDP). Stateful DHCPv6 = It provides each client with an IP address, default gateway, and other IP configuration information. Stateless DHCPv6 = It supplies the client with the DNS server IP address only. It doesn't provide the client with an IP address, and it doesn't track each client's status.

Match the IPv6 address configuration method on the right with its definition on the left.

The router drops the DHCP request.

On a typical network, what happens if a client attempts to receive DHCP configuration from a DHCP server that's located on a different subnet?

-Create and configure DHCP scopes. -Configuring DHCP exclusions.

Rachel is a system administrator. She decides to use IPAM to manage her DHCP servers. Which of the following DHCP features can be configured within IPAM? (Select two.)

206.58.170.67

What is the decimal form of the following binary IP address? 11001110.00111010.10101010.01000011

Sends a DHCP Discover packet

What is the first thing a device does when it connects to a network?

Its own IP address

When a DHCP relay agent receives a broadcast message requesting an available DHCP server, the DHCP uses an IP address as the source IP address. Which of the following is the IP address used by the DHCP relay agent?

Offer, & Discover

When a device renews its DHCP lease, which two steps in the DHCP process are skipped?

4

When you enter a ping command at the command prompt how may echo packets are sent?

Load balance

Which DHCP high-availability option typically assigns both servers 50% of the IP leases?

Dynamic teaming

Which NIC Teaming configuration option uses the IEEE 802.1ax Link Aggregation Control Protocol (LACP) to identify the links that form the team?

ipconfig

Which TCP/IP utility gives you the following output? Image contains : Ethernet adapter Local Area Connection:

ping

Which TCP/IP utility gives you the following output? Image contains: Reply from 192.168.1.168: bytes=32 time< 10ms TTL=128

ipconfig /all

Which command should you use to see how a network interface is configured in the command prompt?

ping 127.0.0.1

Which command should you use to verify that TCP/IP is correctly installed and configured on the local host?

255.255.0.0, & 169.254.0.0

Which network address and subnet mask does APIPA use? (Select two.)

A burst of packets that is separated in time from other bursts by a sufficient gap.

Which of the following BEST describes a flowlet?

Hot standby

Which of the following DHCP high availability options is ideal for smaller networks?

Reservation

Which of the following DHCP scope options assigns a static IP configuration to a device using that device's MAC address?

169.254.0.1 - 169.254.255.254

Which of the following IP address ranges is reserved for Automatic Private IP Addressing (APIPA)?

-Switch-dependent -Switch-independent

Which of the following are NIC teaming modes? (Select two.)

-Uses the IPv6 site prefix's dynamic association for the IPv4 address -Works over the internet -Has dual-stack routers

Which of the following are characteristics of 6to4 tunneling? (Select three.)

-Is configured between individual hosts -Can be used to send data over the internet -Has dual-stack hosts

Which of the following are characteristics of Teredo tunneling? (Select three.)

224.0.0.1, 137.65.1.1, & 172.17.1.3

Which of the following are valid IP addresses? (Select three.)

141:0:0:0:15:0:0:1, & 6384:1319:7700:7631:446A:5511:8940:2552

Which of the following are valid IPv6 addresses? (Select two.)

Subnets divide an IP network address into multiple network addresses.

Which of the following best describes the purpose of using subnets?

A router that connects your home network to the internet.

Which of the following devices is MOST LIKELY to be assigned a public IP address?

GIADDR

Which of the following does the DHCP relay agent use to tell the DHCP server which pool of addresses to use?

IP address

Which of the following identifies both the logical host and logical network addresses?

NTP

Which of the following is a UDP-based protocol that uses an IP helper to perform the same actions as a DHCP relay agent?

Default gateway

Which of the following is needed for clients to communicate with hosts outside of the local subnet?

The server returns the DHCP ACK packet which the relay agent forwards to the client.

Which of the following is the last step in a DHCP request process that uses a DHCP relay agent?

This mode is not often used since it reduces the bandwidth that can be attained.

Which of the following is true about the switch-independent NIC teaming mode?

While the backup server is actively handling leases, clients that need to renew an existing IP configuration have the configuration renewed. However, the IP configuration is assigned only for the MCLT duration, not the typical lease time.

Which of the following is true regarding the hot standby DHCP failover mode?

When a client requests an IP configuration, a hash is generated using the client's MAC address.

Which of the following is true regarding the load balance DHCP failover mode?

UDP

Which of the following protocols does DHCP use when it sends out IP configuration?

A DHCP server assigns addresses to requesting hosts., & It can deliver other configuration information in addition to IP addresses.

Which of the following statements about Dynamic Host Configuration Protocol (DHCP) are true? (Select two.)

Use Automatic Private IP Addressing (APIPA)., & Install a DHCP server on the network.

Which of the following strategies do we use to prevent duplicate IP addresses from being used on a network? (Select two.)

The servers did not share information on active leases., & Backup servers that already had a large number of addresses couldn't handle the additional load.

Which of the following were drawbacks to splitting the DHCP scope feature that was available in Windows Server 2008 and earlier? (Select two.)

The shared storage was a single point of failure., & It was difficult and time consuming to configure.

Which of the following were drawbacks to using the Windows failover cluster feature that was available in Windows Server 2008 and earlier? (Select two.)

IP helper

Which of the following would a device use to receive NTP configuration from a NTP server that's located on a different network?

68

Which port does the relay agent use when sending DHCP information back to the client?

67

Which port is a DHCP Discover packet sent out on when a device first connects to a network?

ARP

Which protocol is used by a device to ensure that an APIPA address is not already in use on the network?

ipconfig /renew, & ipconfig /release

Which two commands do you use to force a new IP configuration?

traceroute, & tracert

While troubleshooting network connectivity at your office, you need to check the routing table. Which of the following commands could you use? (Select two.)

traceroute

While working on a Linux server, you're unable to connect to your Windows Server system across the internet. You're able to ping the default gateway on your own network, so you suspect that the problem lies outside of the local network. Which utility would you use to track the route a packet takes as it crosses the network?

An unavailable DHCP server

You administer a network with Windows Server 2022, UNIX servers, and Windows 10, and Macintosh clients. A Windows computer user calls you one day and says that he is unable to access resources on the network. You type ipconfig on the user's computer and receive the following output: 0 Ethernet adapter: IP address. . . . . . . . . : 169.254.1.17Subnet Mask . . . . . . . . : 255.255.0.0Default Gateway . . . . . . : You also check your NIC and see that the link light is on. What might the problem be in this scenario?

Rogue DHCP server

You are a network technician for a small consulting firm. Many users have reported issues with accessing the network. After some initial troubleshooting, you discover that many devices have the same IP address assigned or incorrect IP configurations. Which of the following would be the MOST likely cause for this?

Incorrect DNS settings

You are a network technician for a small consulting firm. One of your users is complaining that they are unable to connect to the local intranet site. After some troubleshooting, you've determined that the intranet site can be connected to by using the IP address but not the hostname. Which of the following would be the MOST likely reason for this?

Install IPAM to manage your DHCP and DNS servers.

You are a systems administrator for your company's network. You have 600 workstations running Windows 10, three DHCP Servers, and two DNS Servers. You want to centrally managed your DHCP and DNS servers. What should you do?

Ethernet3

You are configuring NIC Teaming on a Windows Server system using four physical network adapters. Each network adapter is connected to a different network switch. You want to configure the team to provide both load balancing and failover protection. You want the day-to-day network load to be balanced between the first three network interfaces. You want to use the fourth network adapter as a failover adapter so that it can immediately take over if one of the other adapters in the team fails. From the drop-down list, select the standby adapter option you need to choose to implement this configuration.

Static Teaming

You are configuring NIC Teaming on a Windows Server system using two physical network adapters. You want to aggregate the bandwidth of both network adapters to provide better throughput. Both adapters are connected to the same network switch. You decide to manually identify the links forming the team on both the switch and the server. Click the option under Additional properties in the NIC Teaming window that must be selected to configure this team.

Switch Independent

You are configuring NIC Teaming on a Windows Server system using two physical network adapters. You want to increase the availability of the system by configuring one of the adapters as a primary adapter and the other as a standby adapter. Each adapter is connected to a different network switch. Click the option under Additional properties in the NIC Teaming window that must be selected to configure this team.

Switch Independent

You are configuring a NIC team on a Windows Server system using two physical network adapters in the system. You want the new team to provide fault tolerance. To accomplish this, the two network adapters are each connected to separate network switches. Should the network switch or the network adapter connected to it fail, you want the second network adapter to take over immediately. From the drop-down list, select the NIC Teaming mode you need to select to implement this configuration.

Address Hash

You are configuring a NIC team on a Windows Server system using two physical network adapters in the system. You want the new team to aggregate the throughput of both network adapters to increase performance. You want to configure the team such that all packets from the same stream are sent to the same network adapter in the team. From the drop-down list, select the load balancing mode you need to choose to implement this configuration.

Team1; Default VLAN

You are configuring a NIC team on a Windows Server system using two physical network adapters in the system. You want the new team to aggregate the throughput of both network adapters to increase performance. Your IP network is divided into several VLANs. You need to specify which VLAN the new NIC team will be a member of. Click the option under Additional properties in the NIC Teaming window you need to select to do this.

Set up one scope for each subnet and set the lease period as a part of each scope's configuration.

You are installing DHCP in four subnets. Three of the subnets have Windows 10 desktop computers, and the fourth subnet has only Windows 10 laptop computers. On the subnet with the laptops, you want any computer that has not logged on in two days to release its IP address. On the desktop subnets, you want computers that have not logged on in 30 days to release their IP addresses. How should you configure the DHCP scopes?

Configure both DHCP servers as hot standby failover partners.

You are the network administrator for CorpNet.xyz. The company has a main office and a branch office. All the clients use DHCP to obtain IP addresses. There is a local DHCP server in each office configured with the appropriate scope for that location. The DHCP server in the branch office fails, and users are unable to obtain IP addresses. You need to configure DHCP to meet the following requirements: -Users must obtain IP addresses from their local DHCP server if it is operational. -Users should be able to obtain IP addresses from the other DHCP server only if the DHCP server in their office is offline. -Both servers should contain a copy of the database of client leases for both scopes. What should you do?

Implement DHCP Name Protection on the scope.

You are the network administrator for CorpNet.xyz. Your environment contains a mix of Windows 10 and non-Microsoft clients. All client computers use DHCP to obtain an IP address. Some Windows 10 clients report that they are experiencing DNS issues. When you investigate in the CorpNet.xyz zone, you notice that the IP addresses in the A records for those clients point to non-Microsoft clients. You need to ensure that non-Microsoft clients cannot overwrite the DNS records for Microsoft clients. Non-Microsoft clients must still be able to register records with the DNS servers. What should you do?

Uninstall and then reinstall the IPAM feature on IPAM1.

You are the network administrator for Corpnet.xyz. All of the servers run Windows Server 2016. You have installed the IPAM Feature on a server named IPAM1. You configured the server using the manual provisioning method. After you configured the server, management released a new policy that requires all IPAM servers to be provisioned using Group Policy. You need to change the provisioning method of the IPAM1 server. What should you do?

Renew the IP address.

You are the network administrator for a large hospital. One of your users, Suzie, calls you stating that she is unable to access any network resources. After some initial troubleshooting, you realize that her computer is using the IP address 169.254.0.52. You've confirmed that the network's physical connection is connected properly. Which of the following should you do next?

The DHCP server is misconfigured or down.

You are the network administrator for a large hospital. One of your users, Suzie, calls you stating that she is unable to access any network resources. After some initial troubleshooting, you realize that her computer is using the IP address 169.254.0.52. You've performed the following troubleshooting steps so far: -Verified physical network connection -Attempted to renew the IP address -Discovered other devices are experiencing the same issue Which of the following is the MOST likely cause for Suzie's issue?

Configure an alternate IP configuration.

You are the network administrator for a small consulting firm. The office network consists of 30 computers, one server, two network printers, and a switch. Due to security concerns, there is no wireless network available in the office. One of your users, Bob, travels to client sites and is generally not in the office. When Bob goes to client sites, he typically just connects to their wireless networks. When he's in the office, Bob connects his laptop to the network with an Ethernet cable. You need to make sure that Bob's laptop is setup so that when he plugs the Ethernet cable into his laptop, no further configuration is needed. Which of the following would be the BEST option to achieve this?

The DHCP lease has not expired.

You are the network administrator for a small consulting firm. Users are complaining that they are unable to reach network resources. After some troubleshooting, you've confirmed that the DHCP server is down. Your network devices should be receiving an APIPA address so that they can at least communicate on the internal network, but many devices are not receiving this address. Which of the following is the MOST likely reason the devices are not receiving their APIPA addresses?

Right-click the IP Address Ranges and then click Reclaim IP Addresses.

You are the network administrator for corpnet.com. All of your servers run Windows Server 2016. You have a server named IPAM1 that has the IPAM feature installed on it. All of the IP addresses in the address block for the 192.168.0.0/16 network appear to be in use. You suspect that some of the IP addresses are available for use on the network. You need to update the IPAM database to show which IP addresses are available. Which action should you take to accomplish this task?

Use the Configure server discovery link.

You are the network administrator for corpnet.com. All of your servers run Windows Server 2016. You have a server named IPAM1 that has the IPAM feature installed on it. You need to configure IPAM1 to detect the DHCP and DNS servers in the corpnet.com domain. What should you do first?

Add User1 to the IPAM Users group.

You are the network administrator for corpnet.com. All of your servers run Windows Server 2016. You have deployed a server named IPAM1 that has the IPAM feature installed on it. A user named User1 works at the company help desk. You need to enable User1 to view all information in Server Discovery, IP Address Space, and Server Management as well as IPAM and DHCP server operational events. User1 should not be able to view IP address tracking information. What should you do?

Add an IP address block for the 192.168.0.0/16 network.

You are the network administrator for corpnet.com. You have three DHCP servers named DHCP1, DHCP2 and DHCP3. Each DHCP server provides services to a different office and is configured with a scope corresponding to the network ID of the office. The main office is assigned addresses from the 192.168.1.0/24 network. The two branch offices are assigned addresses from the 192.168.2.0/24 and 192.168.3.0/24 networks. You have a server named IPAM1 manages the address space for all three offices. All three scopes appear as IP address ranges on the IPAM server. You need to determine the overall utilization of IP addresses across all three offices. What should you do?

On both servers, set the scope range to 194.172.64.10 to 194.172.64.254. On SRV1, exclude addresses 194.172.64.206 to 194.172.64.254. On SRV2, exclude addresses 192.172.64.10 to 192.172.64.205.

You are the network administrator of a network with 90 workstations on a single subnet. Workstations are running Windows 10. All client computers are configured to receive IP address assignments using DHCP. A single Windows 2016 server called SRV1 provides DHCP services and is configured with a single scope, 194.172.64.10 to 194.172.64.254. You want to add a second DHCP server for redundancy and fault tolerance. The existing DHCP server should assign most of the addresses, while the second server will primarily be a backup. You want the two servers to work efficiently together to assign the available addresses. However, you want to do this while using Microsoft's best practices and with as little administrative overhead possible. You install a Windows Server named SRV2 as the secondary server and configure it with the DHCP service. How should you configure the scopes on both servers?

DHCP

You have a TCP/IP network with 50 hosts. There have been inconsistent communication problems between these hosts. You run a protocol analyzer and discover that two of them have the same IP address assigned. Which protocol can you implement on your network to help prevent problems such as this?

Run the ipconfig /release and ipconfig /renew commands.

You have a computer that runs Windows connected to a domain network. One day, you find that the computer is unable to connect to the internet, although it can communicate with a few other computers on the local subnet. You run the ipconfig command and find that the network connection has been assigned the address of 169.254.12.155 with a mask of 255.255.0.0. Which of the following is the first step to resolving this issue?

DHCP server

You have a network with 50 workstations. You want to automatically configure the workstations with the IP address, subnet mask, and default gateway values. Which device should you use?

IP address = 192.168.12.46 Subnet mask = 255.255.255.240 Default gateway = 192.168.12.34 DNS server = 198.162.1.22

You have a small network with a single subnet connected to the internet, as shown below. The router has been assigned the two addresses shown. You need to manually configure the workstation to connect to the network. The workstation should use RouterA as the default gateway and DNS1 as the DNS server address. From the drop-down menu options, select the appropriate parameters to configure the workstation's TCP/IP settings.

Configure an alternate TCP/IP configuration.

You have just received a new laptop at work that you will use on your company network and at home. The company network uses dynamic addressing, while your home network uses static addressing. You connect the laptop to the company network, and everything works fine. When you take your laptop home, you cannot connect to devices on your home network or the internet. You run ipconfig on the laptop and receive the following output: Connection-specific DNS Suffix . :IP Address. . . . . . . . . . . . : 169.254.22.74Subnet Mask . . . . . . . . . . . : 255.255.0.0Default Gateway . . . . . . . . . : You need to be able to connect to both the company network and your home network with the least amount of configuration and cost. What should you do?

Incorrect default gateway

You manage a network that has multiple internal subnets. You connect a workstation to the 192.168.1.0/24 subnet. This workstation can communicate with some hosts on the private network, but not with other hosts. You run ipconfig /all and see the following: Ethernet adapter Local Area Connection:Connection-specific DNS Suffix . : mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address. . . . . . : 00-AA-BB-CC-74-EFDHCP Enabled . . . . . . . : NoAutoconfiguration Enabled. . . : YesIPv4 Address . . . . . . . : 192.168.1.102(Preferred)Subnet Mask . . . . . . . : 255.255.255.0Default Gateway. . . . . . . . . : 192.168.2.1DNS Servers. . . . . . . . . . . : 192.168.2.20 What is the most likely cause of the problem?

Incorrect subnet mask

You manage a network that has multiple internal subnets. You connect a workstation to the 192.168.1.0/24 subnet. This workstation can communicate with some hosts on the private network, but not with other hosts. You run ipconfig /all and see the following: Ethernet adapter Local Area Connection:Connection-specific DNS Suffix . : mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address. . . . . . : 00-AA-BB-CC-74-EFDHCP Enabled . . . . . . . : NoAutoconfiguration Enabled. . . : YesIPv4 Address . . . . . . . : 192.168.1.102(Preferred)Subnet Mask. . . . . . . . : 255.255.0.0Default Gateway . . . . . . : 192.168.1.1DNS Servers . . . . . . . : 192.168.1.20192.168.1.27 What is the MOST likely cause of the problem?

Incorrect IP address

You manage a network that has multiple internal subnets. You connect a workstation to the 192.168.1.0/24 subnet. This workstation cannot communicate with any other host on the network. You run ipconfig /all and see the following: Ethernet adapter Local Area Connection:Connection-specific DNS Suffix. : mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address . . . . . : 00-AA-BB-CC-74-EFDHCP Enabled. . . . . . . : NoAutoconfiguration Enabled . . : YesIPv4 Address. . . . . . . : 192.168.2.102(Preferred)Subnet Mask . . . . . . . : 255.255.255.0Default Gateway. . . . . . : 192.168.1.1DNS Servers . . . . . . . : 192.168.2.20 What is the MOST likely cause of the problem?

Stateless autoconfiguration

You manage a network that uses IPv6 addressing. When clients connect devices to the network, they generate an interface ID and use NDP to learn the subnet prefix and default gateway. Which IPv6 address assignment method is being used?

6to4 tunneling

You manage a network with two locations (Portland and Seattle). Both locations are connected to the internet. The computers in both locations are configured to use IPv6. You'd like to implement an IPv6 solution to meet the following requirements: -Hosts in each location should be able to use IPv6 to communicate with hosts in the other location through the IPv4 internet. -You want to use a site-to-site tunneling method instead of a host-to-host tunneling method. Which IPv6 solution should you use?

DNS and DHCP Servers

You need to define a new IPv4 DHCP scope on the DC1 server in the westsim.com domain. Click the option in the IPAM console that you should use to accomplish this task.

Global unicast addressing

You need to design an IPv6 addressing scheme for your network. The following are key requirements for your design: -Infrastructure hosts, such as routers and servers, are assigned static interface IDs. However, workstations, notebooks, tablets, and phones are assigned interface IDs dynamically. -Internet access must be available to all hosts through an ISP. -Site-to-site WAN connections are created using leased lines. Which type of IPv6 addressing is most appropriate for hosts on this network?

IP Address Inventory

You need to view a list of all IP addresses sorted by device type that have been assigned by DHCP servers in the westsim.com domain. Click the option in the IPAM console that you should use to view this information.

Use IPAM to create a DHCP policy.

You want your mobile devices to have a shorter lease duration than your desktop computers. You are using IPAM to manage your DHCP servers. How can you accomplish this task?

ping

You work in an office that uses Linux and Windows servers. The network uses the TCP/IP protocol. You're sitting at a workstation that uses Windows 10, but an application that you're using is unable to contact a Windows server named FileSrv2. Which command can you use to determine whether your computer can still contact the server?

Linux

You're troubleshooting an IP addressing problem and issue a command to view the system's TCP/IP configuration. The command you use produces the following output: fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500inet6 fe80::2a0:83ff:fe30:57a%fxp0 prefixlen 64 scopeid 0x1inet 192.168.1.235 netmask 0xfffffc00 broadcast 255.255.255.255ether 00:a0:83:30:05:7amedia: Ethernet autoselect (100baseTX <full-duplex>)status: activelo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384inet6 ::1 prefixlen 128inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7inet 127.0.0.1 netmask 0xff000000 Which of the following operating systems are you working on?

ipconfig

You've been called in to troubleshoot a connectivity problem on a newly installed Windows Server system. The system is operating well and is able to communicate with other systems on the local network. However, it's unable to access any systems on other segments of the corporate network. You suspect that the system's default gateway parameter hasn't been configured or may be configured incorrectly. Which of the following utilities are you MOST likely to use to view the system's default gateway information?

Increased network traffic

You've configured your organization's DHCP server to dynamically assign IP addresses to DHCP clients using a lease duration of four days. You're using a Windows server for DHCP, and the default lease time is eight days. What impact, if any, will this have on the network?

254 IP addresses can be assigned to host devices. , & 172.17.0.255 is the network broadcast address.

Your network has a network address of 172.17.0.0 with a subnet mask of 255.255.255.0. Which of the following are true concerning this network? (Select two.)

65534

Your network uses a network address of 137.65.0.0 with a subnet mask of 255.255.0.0. How many IP addresses are available to assign to network hosts on this network?


Related study sets

Uppers, Downers, All Arounders: Chapter 6

View Set

POLS Chapter 1: American Government & Civic Engagement - Openstax

View Set