Engineering Graphics Drafting 1-9
Join the black Polyline and the red Polyline. What is the length of the newly formed Polygon?
130.27
After isolating the layer Chairs, you discover that one of the chairs is red and the rest are blue. What should you do to ensure all of the objects on the layer are the same color and stay that way.
Ensure the color of all objects on the layer is set to ByLayer in the object properties
Open H02_Use_Dimensions.dwg Place a Dimension on the object as shown. What is the value as shown in the dimension?
16.47
What is the Length of newly formed Polygon? Trim named view
1139.31
-Activate the "Rug" named view. -Grab the left side of the rug and stretch it to the left 1 unit. What is the new hatch area of the rug? newfloorplan.dwg
3.9738
-Activate the "ExtendLines" named view. -Trim and extend the existing lines to match the image above. What is the distance between the midpoints of the new lines? newfloorplan.dwg
incorrect
What is the X position value of the AC object? (home.dwg)
incorrect
Open C01_Grid_Snap.dwg Draw a Three-Point Circle using the Centers of A, B, & C What is the Circumference of the circle as shown in the Properties Dialog Box?
73.34
Draw a Closed Polyline starting at Point 10,10 (moving clockwise, using absolute coordinates) to create a polygon by typing in all the given points in order below. 15,17 25,18 28,13 What is the area of the closed polyline?
82.0
What is the Radius of the new line? Array named view
90.32
Using a Polyline, create the shape as shown using Direct Input. What is the length of the Polygon? Write your answer to two decimal places.
90.94
Fillet the top-right corner of the Rectangle to match the image. What is the length of the newly formed Polygon?
92.78
Ensure the color of all objects on the layer is set to ByLayer in the object properties
@4,-5
What is the absolute value of Delta X of the line you just drew as shown in the Properties Dialog Box? snap named view
26.11
-Activate the "Chamfer" named view. -Modify the hexagon shape using the Chamfer and Hatch tools to create the image above. What is the area of the hatch? emptyfloorplan.dwg
2727.98
Which of the following Object Snap icons is not shown in the image below? (Choose all that apply)
Midpoint
What type of dimension is shown in the image below?
aligned
what type of dimension is shown in the image below?
linear
Which keyboard shortcut can be used to quickly activate Ortho mode when drawing a line or shape?
shift
Open H01_Modify_Text.dwg What is the Height of the Text Object?
1
What is the Position X Value of the object? (home.dwg)
14640.28
Activate the "Table" named view. Use the grip to stretch the right of the table 2 units to the right. What is the distance between Point 1 and Point 2? newfloorplan.dwg
3.6892
What is the Arc Length? (home.dwg) Under the view tab within the views panel select the Arc named view. -Draw an Arc, using Point 1, the center point of the box, as the center.
33.32
Extend the Horizontal lines to Vertical line #4What is the new Length of the Horizontal Lines?
34.0
What is the distance from Point 1 to Point 2? (home.dwg)
34.39
What is the Length of the Polyline? (home.dwg)
347.83
Change the Print Setup to ANSI expand B (11.00 x 17.00 inches) paper size. What is the Units value within the Plot Scale section?
387.1
What is the Area of the resultant Hatch Object? home.dwg
3976.88
Copy the object labeled "Point" by 45 units to the right. On which line does the copied point lie? d02.copy.objects.dwg
4
How many objects are within the "desk" layer? emptyfloorplan.dwg
4
Open A01_Selection_Sets.dwg There are multiple lines and circles in this drawing. What is the total number of Circles?
41
Draw a Closed Polyline starting at Point 10,10 (moving clockwise) to create a polygon by typing in all the given points in order below. 15,17 25,18 28,13 What is the length of the closed polyline?
42.73
What is the length of the closed polyline? smalline named view Draw a Closed Polyline starting at Point 10, 10 (moving clockwise, using absolute coordinates) to create a polygon by typing in all the given points in order below. 15, 17 25,18 28.13
42.73
What is the new Length of Line 1? (home.dwg)
459.25
-Draw a hexagon inscribed within the existing circle. What is the area of the hexagon? emptyfloorplan.dwg
4943.99
Offset the Polyline 17" toward the center of the drawing. What Number is next to the new Polyline?
5
-Activate the "Perimeter" named view. What is the perimeter of the whole building shown in the image above? newfloorplan.dwg
54.5
What is the Diameter of the circle as shown in the Properties Dialog Box? home.dwg
5444.21
Create a Gradient Object to match the above image. What is the Area of the resultant Gradient Object?
560.86
What is the area of the Polygon? (home.dwg)
59.44
-Activate the "Table" named view. Use the table shape to create a rectangular array with 2 rows and 3 columns. -Accept all other defaults. What is the distance from Corner 1 to Corner 2? newfloorplan.dwg
6.7080
Using the Grips, change the Rectangle to match the image. What is the Area of the newly formed Polygon?
684.0
What is the Area of the newly formed Polygon? Using Grips
684.00
Which features do the icons in the image below represent?
Object Snap Modes
What is the Style of the EPS Object? Text Style named view
ROOM
What tool was used to create the transformation shown below?
chamfer
-Activate the "Mirror" named view. -Create the second chair shown by mirroring the first chair across the center of the table. What is the distance between the insertion points of the two chairs? newfloorplan.dwg
incorrect.
-Activate the "Extendlines" named view. -Create a 0.5 radius fillet between the two lines. -Create a hatch in the highlighted area. What is the area of the hatch? newfloorplan.dwg
.0098
-Open Layout 1 -Edit the page setup so that the plot scale is set to Fit to Paper What is the Plot Scale unit value? Write your answer to five decimal places. newfloorplan.dwg
.03161
-Activate the "Bathroom" named view. -Scale the toilet to 0.75 using Midpoint 1 as the base point. What is the distance between the center of the drain on the toilet and the center of the drain on the sink?
1.0320
What is the distance from Corner 1 to Corner 2? Write your answer to two decimal places. -Activate the "Table" named view. -Rotate the table by 90 degrees by selecting the geometric center of the table as the rotation point.
1.25
What is the Delta X of the line? (home.dwg) your answer to two decimal places. -Activate the Line name below -Draw a line from Point 1 to Point 2
127.50
Change the TOTAL values of the Columns and Rows to 45 & 30 respectively. What are the new BETWEEN values of the Columns and Rows?
15.0,7.5
-Activate the "CopyDesk" named view. -Copy the desk into the room below. -Snap the top right corner of the desk into the top right corner of the room. What is the distance between Point 1 and Point 2? emptyfloorplan.dwg
175.16
-Move the object labeled "Point" by 9 units to the right. What is the number associated with the vertical red line on which the point now lies?
2
-Activate the Offset named view. -Offset the outside edge of the table by 0.05 to match the image above. What is the area of the newly created offset? Write your final answer to four decimal places.
2.7247
Activate the "NewBedroom" named view. Insert the two beds block named "A$C60A322F3". Snap the creation point to the bottom left corner of the room (Corner 1) What is the distance between Corner 1 to Corner 2? newfloorplan.dwg
3.3717
What is the value as shown in the Dimension? -Under the view tab within the views panel select the Dimensions named view. -Place an angular Dimension on the object using line 1 and line 2.
30
What is the Area of the newly formed Polygon? -New Walls named view.
33227.5
Using the MOVE command, you decide to move an object using the coordinates @12, -4. In this scenario, the value 12 represents -
The horizontal distance from the object's starting point
Open G01_Insert_Blocks.dwg Insert the Block named G01-ANNO3 What does the text within the Block say?
user
Turn off Layer 1. (F03_Layer_Visibility.dwg) Which Box is no longer visible?
box 2
Change the Color of Layer 3 to Yellow. Which Box changed to the color Yellow?
box 3
Which Box is no longer visible? home.dwg
box 4
Which Rectangle do you select as your Trimming object to obtain the following image? (home.dwg)
box b
Insert the Block named G01-ANNO2 anywhere in the drawing. What does the text within the Block say?
certified
What layer is the hexagon at the South end of the floorplan located in? emptyfloorplan.dwg
desk
Which of the following features allow you to create a rounded curve with a specific radius between two existing lines?
fillet
Which of the values in the image below must be changed so that the block is not distorted upon insertion?
not The Insertion Point Z value
Which of the properties cannot be changed for every object on a layer using the ByLayer option?
not linetype
Which icon in the image below would be used to add a new layer to the drawing?
option 2
