Final Exam - Architectural Design
1
cyan lineweight
.50
green lineweight
.25
yellow lineweight
False
0'-6" is an acceptable dimensional figure to be shown on a floor plan
True
8'-0" is an acceptable dimensional figure to be shown on a floor plan
20x20
A garage designed for two cars may be as small as ____.
True
An arrow connecting two spaces on a bubble/block diagram represent relationships of circulation of traffic in a building
red
Annotations are drawn in
Stage 8
Annotations are drawn on
Stage 5
Bathrooms are drawn on
Stage 7
Brick Hatch is drawn on
red
Brick hatch is drawn in
3rd string
Building corners are dimensioned on the
True
Dimensions on the elevation drawing are height dimensions.
Stage 2
Doors are drawin on
yellow
Doors, Windows, Kitchens, Baths, Closets, 1" air gap, and archways are drawn in
False
Elevations can only be identitifed by compass point
10"
Exterior brick veneer walls are drawn ______ thick.
hidden
Features on an elevation that are below the grade line are shown as ____.
4
How many text heights are needed on a floor plan?
2nd string
Interior Wall intersections with Exterior walls are dimensioned on the
details
Interior elevations are refferred to as
True
Interior gypsum wall board on 2x4 stud walls are drawn 5" thick.
Stage 4
Kitchens are drawn on
8
Most codes require that the top of the foundation wall be at least ____ inches above the grade.
1/4" = 1'-0"
Most residential floor plans are plotted at a scale ratio of
.18
Red lineweight
slope triangle
Roof angle is shown on the elevation using the ____.
True
The block diagram allows the architect to get the client's first impression of a floor plan
True
The bubble diagram is probably one of the most used diagrams in the Architectural Profession when it comes to design layout of a building
plot or site
The existing grade line for each outside wall may be obtained from the ____ plan.
Set the Units
The first thing to do when starting a new AutoCAD file is
4
The floor area of an attached garage should be at least _____ inches lower than the interior floor.
True
The keyboard shortcut to access the AutoCAD Design Center is "dc" enter
hidden
The linetype used for the interior wall openings such as archways is
centerline
The location of the finished floor and ceiling on an elevation is usually shown by a __________
4th string
The overall is dimensioned on the
False
The plot plan supplies the measurements for the roof elements and wall heights.
3/32"
The recommended text height for dimensions is
3/16"
The recommended text height for room names is
1/8"
The recommended text height for scale is
1/4"
The recommended text height for view title is
1st string
Wall opening are dimensioned on the
green
Walls are drawn in
Stage 1
Walls are drawn on
Bubble
When planning a building, the _____________ diagram is the quickest diagram to draw.
Stage 3
Windows are drawn on
proportionally
Circles shown on a bubble diagram are drawn
Stage 6
Closets are drawn on
False
Compass point refers to Front, Right, Left, Rear
