Intermolecular Forces: Liquids, Solids, and Phase, Chem Ch. 12 LS, Chem 132 LearnSmart Ch. 12.3, 13.1-4, Chemistry Chapter 12, Chapter 12, Chem 102 Connect 12.5-12.6, Chapter 12 SmartBook, Chem 2 Chapter 12, Chemistry 124 Chapter 12: Molecular Nature...

Given the following information, what is the enthalpy change when 54.5 g of water vapor is heated from 100.0C to 200.0C (C(gas)=33.1J/mol*K and Delta H(vap) =40.7 kJ/mol)

+1.00 * 10^4 J 54.5g*1mol/18.02 q=3.02*33.1*100

Calculate the enthalpy change when 1.75 moles of diethyl ether changes from the liquid to the gas phase if Delta H(vap)=27.3 kJ/mol and C(liquid)=172 J/mol*K for this substance

+47.8 kJ The sign must be positive because the process is endothermic

what structural features would allow a molecular substance to exhibit hydrogen bonding between its molecules

- one or more O-H bonds - one or more N-H bonds

Which of the following statements correctly describe the relationship between the intermolecular forces of a molecular substance and its boiling point? Select all that apply.

-A substance with weak intermolecular forces will have a low boiling point. -A substance with strong intermolecular forces will require more energy to separate the molecules so that they can enter the vapor phase.

Which of the following options correctly describe a phase equilibrium? Select all that apply.

-At equilibrium, the amount of the substance in each phase remains constant. -If the rate of condensation is equal to the rate of evaporation, a phase equilibrium exists. -A system must be closed in order for a phase equilibrium to be established.

Which of the following statements correctly describe the critical temperature and pressure of a substance? Select all that apply.

-At the critical point of a substance, the densities of the liquid and gas phases are equal. -At the temperatures and pressures above the critical point a substance exists as a supercritical fluid.

Which of the following statements correctly describe melting and melting point? Select all that apply.

-At the melting point of a substance the solid and liquid phases are in equilibrium -Pressure changes have little effect on the melting point of a substance. (Notes: -During melting there is no change in temperature, therefore no change in the average kinetic energy of the particles. It is the potential energy that increases during the melting process. -Since the particles of liquids and solids are close together melting point is only slightly affected by pressure changes.)

Which of the following options correctly describe the boiling point of a substance? Select all that apply.

-The boiling point of a substance increases as the external pressure increases. -The boiling point is the temperature at which the vapor pressure equals the external pressure. -Boiling occurs when the vapor pressure of the liquid is sufficient for bubbles of vapor to form in the interior of the liquid. (Notes: -A liquid can evaporate at any temperature. There will always be some molecules in the liquid with enough energy to escape into the vapor phase. The boiling point is specifically defined as the temperature at which the vapor pressure of the liquid equals the external pressure. -If the external pressure increases the substance will have to be heated to a higher temperature so that its vapor pressure can increase to equal the external pressure.)

Which of the following options correctly describe the boiling point of a substance?

-The boiling point of a substance increases as the external pressure increases.-The boiling point is the temperature at which the vapor pressure equals the external pressure.-Boiling occurs when the vapor pressure of the liquid is sufficient for bubbles of vapor to form in the interior of the liquid.(Notes:-A liquid can evaporate at any temperature. There will always be some molecules in the liquid with enough energy to escape into the vapor phase. The boiling point is specifically defined as the temperature at which the vapor pressure of the liquid equals the external pressure.-If the external pressure increases the substance will have to be heated to a higher temperature so that its vapor pressure can increase to equal the external pressure.)

Which of the following statements correctly describe sublimation? Select all that apply.

-The tendency of a molecular substance to sublime is related to the strength of its intermolecular forces. -Sublimation is the change from the solid directly to the gas phase. -Nonpolar molecular substances are more likely to sublime than polar substances. (Note: A nonpolar molecular substance will tend to have weaker intermolecular forces than a polar substance. A nonpolar substance will therefore sublime more easily than a polar substance of similar molecular mass.)

Bonding forces include ionic bonds, metallic bonds, and______ bonds. These types of forces are much_______ than_the forces of attraction between individual molecules, which are called _______forces.

-covalent -stronger -intermolecular

which of the following correctly reflect the relationship between dispersion forces and particle size?

-for molecules of similar shape, dispersion forces tend to increase with increasing molar mass -larger particles are more polarizable and experience stronger dispersion forces

Which of the following structural features would allow a molecular substance to exhibit hydrogen bonding between its molecules?

-one or more O-H bonds- one or more N-H bonds

Describe the surface tension of a liquid

1. A polar liquid will have higher surface tension than a nonpolar liquid 2. Surface tension is the result of a net downward and inward force on the surface particles of a liquid 3. Surface tension is the amount of energy required to increase the surface area of a liquid by a unit area

Describe the relationship between the intermolecular forces of a molecular substance and its boiling point?

1. A substance with strong intermolecular forces will require more energy to separate the molecules so that they can enter the vapor phase. 2. A substance with weak intermolecular forces will have a low boiling point.

Describe melting and melting point

1. At melting point of a substance the solid and liquid phases are in equilibrium. 2. Pressure changes have little effect on the melting point of a substance.

Describe the critical temperature and pressure of a substance

1. At the critical point of a substance, the densities of the liquid and gas are equal 2. At temperature and pressures above the critical point a substance exists as a supercritical fluid

Describe bonding and intermolecular forces

1. Bonding forces are generally much stronger than intermolecular forces. 2. For a molecular substance, the strength of the intermolecular forces determines the physical properties of its phases. 2. Intermolecular forces involve partial or small charges that are far apart and are relatively weak.

What is a modern application of a liquid crystal?

1. Calculator and watch displays 2. High -strength materials 3. Color changing thermometers

Describe the three types of cubic unit cells

1. Each particle in a simple cubic unit cell has a coordination number of 6 2. The face-centered cubic cell has no particles in the center of the cube 3. The body-centered cubic unit cell has 2 atoms per unit cell

H2O exhibits extremely strong and efficient hydrogen bonding between its molecules. What is the result of this behavior?

1. High capillarity 2. High specific heat capacity 3. High surface tension

H2O exhibits extremely strong and efficient hydrogen bonding between its molecules. What is the result of this behavior?

1. High capillarity 2. High specific heat capacity 3. High surface tension

Describe equilibrium

1. If the rate of condensation is equal to the rate of evaporation, a phase equilibrium exists. 2. At equilibrium, the amount of the substance in each phase remains constant. 3. A system must be closed in order for a phase equilibrium to be established.

Describe the different packing arrangements observed for cubic unit cells?

1. In hexagonal closest packing, the particles of the third layer lie directly over the particles of the first layer. 2. The cubic close-packed structure has the repeating pattern abcabc 3. Cubic closest packing is based on the face-centered cubic cell

What is the relationship between dispersion forces and particle size?

1. Large particles are more polarizable and experience stronger dispersion forces. 2. For molecules of similar shape, dispersion forces tend to increase with increasing molar mass

which structures would allow a molecular substance to exhibit hydrogen bonding between molecules?

1. One or more O-H bonds 2. One or more N-H bonds

Describe the general trends in polarizabilty

1. Polarizability increases down a group on the periodic table 2. Anions are larger than their parent atoms and are therefore more polarizable 3. The greater the number of electrons a particle has, the greater its polarizability will generally be.

What is needed to calculate the numerical change in vapor pressure with change in temperature

1. R= 8.314 J/K*mol 2. One or both of the vapor pressures 3. Delta H(vap)

Describe the boiling point of a substance

1. The boiling point is the temperature at which the vapor pressure equals the external pressure. 2. The boiling point of a substance increases as the external pressure increases. 3. Boiling occurs when the vapor pressure of the liquid is sufficient for bubbles of vapor to form in the interior of the liquid.

Describe the bonding in graphite

1. The pi bonds in graphite are delocalized, allowing graphite to conduct electricity. 2. Graphite consists of flat sheets or layers of carbon atoms that are covalently bonded together with the sheet.

Describe van der Waals radi

1. The van der waals radius for a given atom is larger than its covalent radius 2. The van der Waals distance and radius are important for determining how closely and two molecules can approach each other. 3. In general, van der waals radii increase down a group in the periodic table

Describe vapor pressure

1. Vapor pressure increases as temperature increases. 2. The vapor pressure is the pressure exerted by the vapor above a liquid at equilibrium. 3. The vapor pressure of a molecular substance depends on the strength of its intermolecular forces.

Describe viscosity of a liquid

1. Viscosity is a liquids resistance to flow 2. A liquid with stronger intermolecuar forces will have a higher viscosity 3. The viscosity of a given liquid decreases with increasing temperature

Describe sublimation

1. nonpolar molecular substances are more likely to sublime than polar substances. 2. The tendency of a molecular substance to sublime is related to the strength of its intermolecular forces. 3. Sublimation is the change from the solid directly to the gas phase

Given the following information, what is the enthalpy change when 54.5 g of water vapor is heated from 100.0°C to 200.0°C? (sgas= 33.1 J/mol.K and ΔH°vap = 40.7 kJ/mol)

1.00 × 10^4 J

the H₂O molecule has _______ covalent O-H bonds and _____ lone pairs on the oxygen atoms. This means that each H2O molecule can form a maximum of ____H bonds with neighboring H2O molecules. The hydrogen bonding in H2O is therefore very effective

2 2 4 bonds

Given the following information, what is the enthalphy change when 54.5 g of water vapor is heated from 100*C to 200*C

54.5g*(1mol/18.02g) = 100X10^4J q = 3.02 X 33.1 * 100

Which of the following statements correctly describe the viscosity of a liquid? Select all that apply.

A liquid with stronger intermolecular forces will have a higher viscosity. The viscosity of a given liquid decreases with increasing temperature. Viscosity is a liquid's resistance to flow.

Which statement correctly explains how polarizability affects intermolecular forces?

A more polarizable molecule experiences stronger dispersion forces and therefore stronger intermolecular forces overall.

Which statement correctly explains how polarizability affects intermolecular forces? Multiple choice question.

A more polarizable molecule experiences stronger dispersion forces and therefore stronger intermolecular forces overall.

How does polarizability affect intermolecular forces?

A more polarized molecule experiences stronger dispersion forces and therefore stronger intermolecular forces overall

Which of the following correctly defines a phase of matter?

A physical state that is physically distinct and homogeneous

Which correctly describes a heating-cooling curve/

A plot of heat vs temperature for a substance that is heated or cooled at a constant rate and constant pressure

Which of the following correctly describes a heating-cooling curve?

A plot of heat vs. temperature for a substance that is heated or cooled at a constant rate and constant pressure

Which of the following correctly describes a heating-cooling curve?

A plot of heat vs. temperature for a substance that is heated or cooled at a constant rate and constant pressure Reason: A heating-cooling curve is constructed by adding or removing heat at a constant rate. The temperature may or may not change, depending on what is happening to the substance.

Describe a heating cooling curve

A plot of heat vs. temperature for a substance that is heated or cooled at a constant rate and constant pressure.

Which of the following statements correctly describe the surface tension of a liquid? Select all that apply. (Assume the liquid is a molecular substance.)

A polar liquid will have a higher surface tension than a nonpolar liquid. Surface tension is the amount of energy required to increase the surface area of a liquid by a unit area. Surface tension is the result of a net downward and inward force on the surface particles of a liquid.

What is true of the relationship between intermolecular forces of a molecular substance and it's boiling point?

A substance with weak intermolecular forces will have a low boiling point. A substance with strong intermolecular forces will require more energy to separate the molecules so that they can enter the vapor phase.

Which statement correctly describes the relationship between intermolecular forces and the vapor pressure of a substance?

A substance with weaker intermolecular forces vaporizes more easily and has a high vapor pressure.

Select all the statements that correctly describe the critical temperature and pressure of a substance.

A supercritical fluid is the state of a substance when its temperature and pressure both exceed Tc and Pc respectively. A gas cannot be liquefied at temperatures above its Tc.

Describe phase equilibrium. 3 statements

A system must be closed in order for a phase equilibrium to be established. At equilibrium, the amount of substance in each phase remains constant. If the rate of condensation is equal to the rate of vaporization, a phase equilibrium exists

Which of the following options correctly describe the general trends in polarizability? Select all that apply.

Anions are larger than their parent atoms and are therefore more polarizable. The greater the number of electrons a particle has, the greater its polarizability will generally be. Polarizability increases down a group on the periodic table.

Ice contains a very open structure due to the arrangement of H bonds. Liquid water is more dense than ice because H bonds ______, allowing a much tighter packing arrangement of molecules. Multiple choice question.

Are more random

Which of the following statements correctly describes the relationship between the boiling point of a substance and the external pressure?

At a lower external pressure, the molecules of the substance require less energy to form bubbles of vapor and the boiling point is lower.

Which of the following options correctly describes a phase equilibrium?

At equilibrium, the amount of the substance in each phase remains constant. If the rate of condensation is equal to the rate of evaporation, a phase equilibrium exists. A system must be closed in order for a phase equilibrium to be established.

Which of the following statements correctly describe the critical temperature and pressure of a substance?

At the critical point of a substance the densities of the liquid and gas phases are equal At temperatures and pressures above the critical point in a substance exists as a supercritical fluid

Which statement correctly describes the process of melting point of a substance?

At the melting point of a substance, the solid and liquid phases are in equilibrium

Which statement correctly describes the process of melting and the melting point of a substance?

At the melting point of a substance, the solid and liquid phases are in equilibrium.

In which region of the heating curve shown are both the liquid and the gas phases of the substance present?

Between C and D

Solids and liquids have intermolecular forces large enough to keep the particles in contact and are referred to as the ____ phases.

Blank 1: condensed

The temperature above which a gas cannot be liquefied by increasing the pressure on it is called its ___temperature. A fluid at a temperature and pressure above Tc and Pc is called a ___ fluid.

Blank 1: critical Blank 2: supercritical

The molar heat of ____ is the amount of energy required to melt 1 mole of solid. The energy change that occurs when 1 mole of liquid freezes is ____ n magnitude but ____ in sign.

Blank 1: fusion Blank 2: equal, equivalent, or the same Blank 3: opposite

The amount of heat required to vaporize 1 mole of substance at its boiling point is referred to as the molar ____ of ____ ΔHvap.

Blank 1: heat or enthalpy Blank 2: vaporization

The process by which a substance transitions directly from the solid phase to the vapor phase is known as ___. The reverse process, in which gas molecules go directly to the solid phase, is known as ____.

Blank 1: sublimation Blank 2: deposition

A heating curve shows the changes in ___ that occur when ___ is added to or removed from a sample of matter.

Blank 1: temperature Blank 2: heat

Which of the following statements correctly describe bonding and intermolecular forces?

Bonding forces are generally much stronger than intermolecular forces. For a molecular substance, the strength of the intermolecular forces determines the physical properties of its phases. Intermolecular forces involve partial or small charges that are far apart and are relatively weak.

q

Both solid and liquid phases are present

select all statements that describe molar heat of vaporization

Both the boiling point and delta H vap of a molecular substance are related to the strength of the intermolecular forces Delta H vap is the amount of heat required to vaporize 1 mol of a substance at its boiling point Delta H vap is a positive quantity

Place the following compounds in order of increasing strength of their intermolecular forces (weakest at the top of the list to strongest at the bottom). These compounds have approximately equal molecular masses.

CH3CH2CH2CH3 CH3CH2OCH3 CH3CH2OH

What principal intermolecular force keeps these molecules together? CH3OH CH3F C3H8 CaCl2

CH3OH-hydrogen bonding CH3F-dipole dipole C3H8-dispersion CaCl2-ionic bonding

What principal intermolecular force keeps these molecules together? CH3OH CH3F C3H8 CaCl2

CH3OH-hydrogen bonding CH3F-dipole dipole C3H8-dispersion CaCl2-ionic bonding

Within a phase, a change in heat causes the temperature of the substance to _____ as the _____ energy of the molecules changes. During a phase change, however, a change in heat causes a change in the _____ energy of the molecules and the temperature will ______.

Change, kinetic, potential, stay the same

A liquid rises against the pull of gravity through a narrow space through capillary action. This results from a competition between the _____ intermolecular forces between the molecules of the liquid itself and the _____ forces between the liquid and the walls of the container. Multiple choice question.

Cohesive; Adhesive

Gas to Liquid

Condensation

Match each phase change correctly to the term used to describe the process. Gas → Liquid Liquid → Solid Solid → Gas Liquid → Gas Solid → Liquid Gas → Solid

Condensation Freezing Sublimation Vaporization Melting/Fusion Deposition

Nano-structural crystal

Consist of materials that do not behave as atoms or as crystals; sizes range from 1 to 100 nm

Polymeric crystal

Consists of extremely large molecules that adopt the shape of coils due to intermolecular forces.

Ceramic crystal

Consists of mostly covalent solids formed at high temperature that are very resistant to heat and chemicals

The temp above which a gas cannot be liquefied by increasing the pressure on it is called its ____ temperature. A fluid at a temperature and pressure above Tc and Pc is called a ____ fluid

Critical; Supercritical

Surface tensiob

Debris and bugs readily float on the surface of water because it has the highest ______ of any liquid except for some molten metals and salts.

Gas to Solid

Deposition

Which intermolecular forces are exhibited between molecules of the compound shown?

Dipole-dipole forces Dispersion forces

Which of the following statements correctly describe dipole-dipole forces? Select all that apply.

Dipole-dipole forces are the forces of attraction between two polar molecules. For two compounds of similar molar mass, the greater the molecular dipole moment, the stronger the dipole-dipole forces.

Which of the following statements correctly describe dipole-dipole forces? Select all that apply.

Dipole-dipole forces of attraction between two polar molecules For two compounds of similar molar mass, the greater the molecular dipole moment, the stronger the dipole-dipole forces.

Which of the following statements correctly describe dipole-dipole forces?

Dipole-dipole forces of attraction between two polar molecules. For two compounds of similar molar mass, the greater the molecular dipole moment, the stronger the dipole-dipole forces.

Which of the following statements correctly describe dispersion or London forces? Select all that apply.

Dispersion forces are a weak attraction between temporary dipoles. All covalent compounds exhibit dispersion forces.

The phase changes of many substances are reversible and a phase change, just like a chemical reaction, may reach ___providing it takes place in a(n)___system.

Equilibrium , Closed

T/F Dispersion forces are exhibited only by nonpolar molecules

False

True or False: A bond between O and H within any molecule is called a hydrogen bond

False

True or false: Dispersion forces are exhibited only by nonpolar molecules.

False

True or false: A bond between O and H within any molecule is called a hydrogen bond.

False Reason: Correct. A hydrogen bond is an intermolecular attraction between a hydrogen atom and a lone pair of electrons on an O, N, or F atom in another molecule or a different part of the same molecule. A hydrogen bond cannot exist between two atoms that are already covalently bonded to each other. To participate in hydrogen bonding a hydrogen atom must be covalently bonded to N, O, or F.

True or false: Dispersion forces are exhibited only by nonpolar molecules.

False Reason: Correct. Dispersion forces are experienced by ALL particles (atoms, ions, and molecules). Dispersion forces are, however, the only intermolecular force experienced by nonpolar molecules and atoms.

Which of the following statements correctly describe bonding and intermolecular forces? Select all that apply.

For a molecular substance, the strength of the intermolecular forces determines the physical properties of its phases. Intermolecular forces involve partial or small charges that are far apart and are relatively weak. Bonding forces are generally much stronger than intermolecular forces

Liquid to Solid

Freezing

The molar heat of ____ is the amount of energy required to melet 1 mole of solid. the energy change that occurs when 1 mole of liquid freezes is ____ in magnitude but ____ in sign

Fusion; Equal; Opposite

Match each phase change correctly to the term used to describe the process.

Gas → Liquid: Condensation Liquid → Solid: Freezing Solid → Gas: Sublimation Liquid → Gas: Vaporization Evaporation Solid → Liquid: Melting

Rank the states of matter based on increasing strength of intermolecular forces, placing the state whose intermolecular forces are weakest at the top.

Gas. Liquid, Solid

Which correctly describes the bonding in graphite?

Graphite consists of flat sheets or layers of covalently bonded carbon atoms The pi bonds electrons in graphite are delocalized, allowing graphite to conduct electricity

Water is unique in the way it behaves as a wonderful solvent of many substances. Which of the following is NOT correct? Multiple choice question.

H2O dissolves metals through metallic bond seperation

A substance with weaker intermolecular forces vaporizes more easily and....

Has a high vapor pressure

A heating cooling curve shows the changes that occurs when ____ is added to or removed from a sample of matter at a _____ rate

Heat, constant,

H2O exhibits extremely strong and efficient hydrogen bonding between its molecules. Which of the following properties result from this behavior?

High capillary. High specific heat capacity. High surface tension.

H2O exhibits extremely strong and efficient hydrogen bonding between its molecules. Which of the following properties result from this behavior? Select all that apply.

High surface tension High specific heat capacity High capillarity

Since H2O is able to exhibit different types of intermolecular forces including hydrogen bonding, this substance has a _____ heat capacity and a _____ heat of vaporization compared to other liquids.

High; High

Face-centered cubic

Identical particles lie at each corner and in the center of each face but not in the center of the cube

Body-centered cubic

Identical particles lie at each corner and in the center of the cube

An increase in the temperature of a substance will _____ the fraction of molecules that have enough kinetic energy to escape liquid phase and will therefore cause a(n) _____ in the vapor pressure

Increase, increase

The physical state of a molecular substance at a particular temperature and pressure depends on the strength of its

Intermolecular forces

The surface tension of a liquid, the energy required to increase the surface area by a given amount, is dependent on ______ and ______. Select all that apply.

Intermolecular forces Temperature

Which of the following factors influence whether a given substance exists as a gas, liquid, or solid? Select all that apply.

Intermolecular forces Temperature

Covalent bonds are classified as

Intramolecular forces

_____ involve the attraction between an charged particle and a nearby polar molecule. The most common example of such an intermolecular force of attraction is the dissolution of an ionic compound by water.

Ion-dipole forces

For a pure substance, delta H for each phase change is given in units of ____ per ____ of substance. Delta H is measured at a pressure of ____ atm and the temperature of the change

Kilojoules, mole, 1

Which of the following options correctly reflect the relationship between dispersion forces and particle size? Select all that apply.

Larger particles are more polarizable and experience stronger dispersion forces. For molecules of similar shape, dispersion forces tend to increase with increasing molar mass.

Delta H(vap)

Liquid to Gas

- Delta H(fus)

Liquid to Solid

Which of the following are known as condensed phases? Select all that apply.

Liquids Solids

Unlike most other substances, the density of solid H2O is ____ than the density of the liquid; hence water ____ when it freezes. This is reflected in the phase diagram for H2O. The solid-liquid boundary line has a negative slope, which reflects the fact that the higher the pressure, the ____ the temperature at which the water freezes

Lower; Expands; Lower

At _____ temperatures the forces of attraction between particles dominate because the particles are moving slowly. At _____ temperatures the movement of the particles overcomes the attractions. Multiple choice question.

Lower;Higher

Solid to Liquid

Melting/Fusion

Which option correctly reflects the relationship between molecular shape and the strength of dispersion forces?

Molecules with a large surface area have more points of contact and therefore experience stronger dispersion forces.

Which statement correctly explains why ΔHofus is typically much smaller than ΔHovap for a given substance?

More energy is required to fully separate particles than to move particles out of their fixed positions in the solid.

Molecules with a larger surface area have _____ points of contact between them than molecules with less surface area. This leads to _____ dispersion forces overall. Multiple choice question.

More; Stronger

A combination of q = nCΔT and q = nΔHvap is..

No phase change occurs in this temperature range, so the molar heat of vaporization will not be used.

Dispersion forces are the only type of intermolecular force exhibited by atoms and by ______ molecules. Without the existence of dispersion forces, such substances could not exist in the _______ states of matter.

Nonpolar; condensed.

Which of the following structural features would allow a molecular substance to exhibit hydrogen bonding between its molecules? Select all that apply.

One or more O-H bonds One or more N-H bonds

A physical state of matter that is chemically and physically uniform is called a(n) _____. Multiple choice question.

Phase

The triple point is represented on a phase diagram to show when all 3 ____ of a substance are at ____

Phases; Equilibrium

The heat lost in the cooling process (q) is the _____

Product of the amount (n) of substance, the molar heat capacity of substance in certain phase, and the temperature change during this step Final T - Initial T; (moles)(c of specific phase)( Tf-Ti)

Viscosity

Resistance of fluid to flow

Metallic

Soft to hard, varying melting points, excellent conductors of electricity ad heat as well as malleable and ductile

Delta H(subl)

Solid to Gas

Delta H(fus)

Solid to Liquid

Water has a very high specific heat capacity compared to other common liquids. This property is due to ______ water.

Strong hydrogen bonding in

Intermolecular forces influence the vapor pressure of a substance. The ____ the intermolecular forces, the more tightly the molecules are held together, and the ____ the amount of energy required for them to break free of the liquid phase

Stronger; Greater

Solid to Gas

Sublimation

If heat is removed rapidly from a liquid the particles will have no time to adopt the ordered arrangement of a solid. The resulting ____ liquid will be unstable

Supercooled

Which of the following statements correctly describe the surface tension of a liquid? Select all that apply. (Assume the liquid is a molecular substance.)

Surface tension is the result of a net downward and inward force on the surface particles of a liquid. A polar liquid will have a higher surface tension than a nonpolar liquid. Surface tension is the amount of energy required to increase the surface area of a liquid by a unit area

True or false: The molar enthalpy of sublimation of a given substance can be determined if its enthalpies of fusion and vaporization are known.

T

A heating curve shows the changes in ____ that occur when ____ is added or removed from a sample of water

Temperature; Heat

A phase diagram is a plot of ____ on the x-axis vs. ____ on the y-axis. This diagram shows the stable regions for each ____ of matter and the conditions under which these may exist in equilibrium

Temperature; Pressure; Phase

As the boiling point graph shows, H2O, NH3, and HF deviate from the boiling point trend shown for the hydrides of the carbon group. Select the statement that correctly explains this deviation. Multiple choice question.

The H bonding between molecules of H2O, NH3, and HF is much stronger than the intermolecular forces between CH4 molecules.

What does the term doping refer to in semiconductors?

The addition of a small amount of a Group 3A or Group 5A element to a semiconductor sample

Simple cubic

The centers of eight identical particles define the corners of a cube

Insulator

The energy gap between the valence and conduction bands is large and no current can flow

Semiconductor

The energy gap between the valence and conduction bands is small so electrons can cross if thermally excited.

How does the addition of phosphorus to silicon create an n-type semiconductor?

The extra electrons from the phosphorus atoms bridge the gap between the valence and conductance bands, increasing conductivity.

Intermolecular forces

The forces of attraction between one individual molecule and another.

Which of the following statements correctly describes the hydrogen-bonding capabilities of the water molecule?

The magnitude of ΔEN of the O-H bond is very large. The oxygen atom has two lone pairs with which to form H bonds on neighboring molecules. The bent geometry of the water molecule makes it very polar.

Which of the following statements correctly interpret the phase diagram shown? Select all that apply.

The normal boiling point of this substance is 135oC. The arrow marked 1 represents a change from the solid to the liquid phase.

Which of the following options correctly describe the phases of matter in terms of kinetic molecular theory? Select all that apply.

The particles of a liquid have enough kinetic energy to move randomly past each other, allowing the liquid to flow. A liquid occupies a fixed volume because the particles are held together by appreciable attractive forces. In the solid phase, forces of attraction dominate over the movement of particles.

In cubic closest packing

The particles of the third layer do not lie directly over the particles of the first layer

in cubic closest packing

The particles of the third layer do not lie directly over the particles of the first layer

Describe packing efficiency of a unit cell

The percentage of the total volume occupied by the particles themselves

Select the correct description of capillary action.

The rising of a liquid through a narrow space against gravity

A sample containing 25g liquid diethyl ether is cooled from 25.5*C to 3.5*C. the substance remains in the liquid phase. Select all the options that correctly reflect the calculations needed to determine q

The sample contains 3.337X10^-2 mol diethyl ether q=-0.13 kJ

What is van der Waals distance?

The shortest distance between two non-bonded atoms in adjacent molecules

Match each lettered portion of the following heating curve to the correct description. p s q r t

The substance is in the solid phase. The substance is changing from liquid to vapor. Both solid and liquid phases are present. The kinetic energy of the liquid particles is increasing. The particles are far apart and movement dominates the phase.

What will affect the vapor pressure of a pure molecular substance?

The temperature, the strength of the intermolecular forces, and the structure of the substance

A 25.0-g sample of ice at -6.5oC is removed from the freezer and allowed to warm until it melts. Given the data below, select all the options that correctly reflect the calculations needed to determine the total heat change for this process. Melting point at 1 atm = 0.0oC; ssolid = 2.09 J/goC; sliquid = 4.21 J/goC; ΔHofus = 6.02 kJ/mol

The total heat change for the process is equal to +8.71 kJ. q for the phase change is given by 1.39 x 6.02 = 8.37 kJ.

Which of the following statements correctly describe vapor pressure?

The vapor pressure is the pressure exerted by the vapor above a liquid at equilibrium. The vapor pressure of a molecular substance depends on the strength of its intermolecular forces. Vapor pressure increases as temperature increases.

Conductor

There is no energy gap between the valence and conduction bands so electrons flow freely

Which of the following statements correctly explain why hydrogen bonding requires that H should be covalently bonded to N, O, or F?

These elements are small, allowing their lone pairs to approach the H of an adjacent molecule closely. N, O, and F are so electronegative that a H covalently bonded to any one of these elements has very high positive character.

Describe polarizability

This is a measure of how the electron cloud around an atom responds to its electronic environment.

Which of the following options correctly defines polarizability?

This is a measure of how the electron cloud around an atom responds to its electronic environment.

Which of the following options correctly defines polarizability? Multiple choice question.

This is a measure of how the electron cloud around an atom responds to its electronic environment.

A sample of ethanol containing 0.35 mol is cooled from 125.0cC to 62.0oC. Given the data below, select all the options that correctly reflect how to calculate the total heat change for the process. Boiling point for ethanol at 1 atm = 78.5oC; ΔHovap = 40.5 kJ/mol; Cliq = 1130 J/mol⋅oC; and sgas = 65.9 J/mol⋅oC

This process involves 3 separate stages. q for the phase change = 0.35 x -40.5 = -14 kJ

T/F A compound containing one or more oxygen atoms is not necessarily capable of forming hydrogen bonds between its molecules

True

The molar enthalpy of sublimation of a given substance can be determined if its enthalpies of fusion and vaporization are known

True

True or false: A compound containing one or more oxygen atoms is not necessarily capable of forming hydrogen bonds between its molecules.

True Reason: The presence of oxygen alone is not sufficient to allow a compound to form hydrogen bonds between its molecules. In addition to oxygen, the compound must have a hydrogen atom capable of hydrogen bonding, i.e., a hydrogen atom covalently bonded to N, O, or F.

The pressure exerted by the _____ above a liquid at equilibrium is called the equilibrium _____ pressure. This pressure _____ as the temperature of the system increases

Vapor, vapor, increases.

Liquid to Gas

Vaporization

Answer Mode Multiple Select QuestionYour Answer correct Water is often called the "universal solvent" because of its ability to dissolve so many substances. Select the means by which water behaves as a solvent. Select all that apply.

Water dissolves nonpolar gases somewhat through dipole-induced dipole interactions. Water dissolves ionic compounds through such strong ion-dipole forces that ions separate from their lattices and stay in solution. Water dissolves polar substances through hydrogen bonding or dipole-dipole attractions.

Match the effect of heating/cooling a substance to the change in temperature that occurs in each case. Instructions

Within a phase: Heat change causes a temperature change. During a phase change: Heat is added or removed but temperature remains the same.

Match the effect of heating/cooling a substance to the change in temp that occurs

Within a phase: heat change causes a temperature change During a phase change: Heat is added or removed but temperature remains the same

ion-dipole forces

_ involve the attraction between an charged particle and a nearby polar molecule. The most common example of such an intermolecular force of attraction is the dissolution of an ionic compound by water.

A solution is

a homogeneous mixture meaning it exists in a single phase

define polarizability

a measure of how the electron cloud around an atom responds to its electronic environment

Describes a heating-cooling curve?

a plot of heat vs temperature for a substance that is heated or cooled at a constant rate and constant pressure

which of the following correctly describes a heating-cooling curve?

a plot of heat vs. temperature for a substance that is heated or cooled at a constant rate and constant pressure

what describes the relationship between intermolecular forces and the vapor pressure of a substance

a substance with weaker intermolecular forces vaporizes more easily and has a high vapor pressure

Describe the relationship between intermolecular forces and the vapor pressure of a substance.

a substance with weaker intermolecular forces vaporizes more easily and has a high vapor pressure.

Which of the following statements correctly describe bonding and intermolecular forces? Select all that apply. a) bonding forces are generally much stronger than intermolecular forces b) intermolecular forces involve partial or small charges that are far apart and are relatively weak c) for a molecular substance, the strength of the intermolecular forces determines the physical properties of its phases d) bonding forces occur within the nucleus of the atom and are therefore strong

a) bonding forces are generally much stronger than intermolecular forces b) intermolecular forces involve partial or small charges that are far apart and are relatively weak c) for a molecular substance, the strength of the intermolecular forces determines the physical properties of its phases

Which option correctly reflects the relationship between molecular shape and strength of dispersion forces? a) molecules with a large surface have more points of contact and therefore experience stronger dispersion forces b) molecules with a small surface are can pack more closely together and therefore experience stronger dispersion forces c) two molecules of the same molar mass will experience the same dispersion forces regardless of their shape

a) molecules with a large surface area have more points of contact and therefore experience stronger dispersion forces

Which of the following options correctly reflects the relationship between dispersion forces and particle size? Select all that apply. a)larger particle are more polarizable and experience stronger dispersion forces b) dispersion forces tend to decrease with size as larger particles are farther apart and therefore attract each other less c) dispersion forces are strongest for small particles since they can get closer together in space d) for molecules of similar shape, dispersion forces tend to increase with increasing molar mass

a)larger particle are more polarizable and experience stronger dispersion forces d) for molecules of similar shape, dispersion forces tend to increase with increasing molar mass

The hexagonal close-packed structure has the pattern

ababab

The cubic-packed structure has the pattern

abcabc

the cubic close-packed structure has the pattern

abcabc

attractive forces between the liquid and the particles of the container

adhesive forces

Which of the following statements correctly describe dispersion or London forces?

all covalent compounds exhibit dispersion forces dispersion forces are a weak attraction between temporary dipoles

Network covalent solid

atoms held together by covalent bonds

Adhesive forces

attractive forces between the liquid and the particles of the container

What term is used to describe the distance between the nuclei of two bonded atoms?

bond length

the distance between the nuclei of two bonded atoms

bond length

Which of the following statements correctly describes dispersion or London forces? Select all that apply. a) dispersion forces are stronger for smaller molecules b) dispersion forces are the primary intermolecular force exhibited by polar molecules c)all covalent compounds exhibit dispersion forces d) dispersion forces are a weak attraction between temporary dipoles

c) all covalent compounds exhibit dispersion forces d) dispersion forces are a weak attraction between temporary dipoles

Which of the following statements correctly describes dispersion or London forces? Select all that apply. a) dispersion forces are stronger for smaller molecules b) dispersion forces are the primary intermolecular force exhibited by polar molecules c)all covalent compounds exhibit dispersion forces d) dispersion forces are a weak attraction between temporary dipoles

c) all covalent compounds exhibit dispersion forces d) dispersion forces are a weak attraction between temporary dipoles

What is miscible

can dissolve in any proportion

If a system at equilibrium is disturbed, the system will respond in such a way as to ______ the effect of the disturbance. If a liquid-vapor equilibrium is disturbed by removing some of the vapor, the pressure in the system will ______. The system will respond by increasing the rate of ______ until equilibrium is re-established and the vapor pressure is equal its original value.

cancel, decrease, evaporation

Diamond is one of the common crystalline forms of ___ in which each atom is bonded to 4 others by strong, ___ bonds to create a large 3-D array.

carbon, silicon covalent

Diamond is one of the common crystalline form of _____ in which each atom is bonded to others by strong, ______ bonds to create a large 3D array.

carbon, single covalent

Ionic solid

cations and anions arranged in a regular lattice held together by ion-ion attraction

All___ are nonmetallic inorganic compounds.

ceramics

within a phase, a change in heat causes the temp of the substance to ______ as the _____ energy of the molecules changes. During a phase change, however, a change in heat causes a change in the _____ energy of the molecules and the temperature will ______

change kinetic potential stay the smae

Within a phase, a change in heat causes the temperature of the substance to ___ as the ___ energy of the molecules changes. During a phase change, however, a change in heat causes a change in the ___ energy of the molecules and the temperature will___.

change, kinetic, potential, stay the same

Within a phase, a change in heat causes the temperature of the substance to _____ as the _____ energy of the molecules changes. During a phase change, however, a change in heat causes a change in the _____ energy of the molecules and the temperature will _____.

change; kinetic; potential; stay the same

the electrons of a smaller atom or ion are _______ the nucleus and held ______ tightly than those of a larger atom or ion. A smaller atom ion is therefore ________ polarizable than a larger one

closer to more less

The electrons of a smaller atom or ion are___ the nucleus and held ___ tightly than those of a larger atom or ion. A smaller atom or ion is therefore___ polarized than a larger one.

closer to, more, less

intermolecular forces within the liquid itseld

cohesive forces

A liquid rises against the pull of gravity through a narrow space through capillary action. This results from a competition between ___ intermolecular forces between the molecules of the liquid itself and the ___ forces between the liquid and the walls of the container.

cohesive; adhesive

gas → liquid

condensation

Liquid crystal

consist of a crystal phase that flows like a liquid but has an ordered shape

The number of nearest neighbors for a particle in the unit cell of a crystal is called the ___ number of particles

coordination

Bonding forces include ionic bonds, metallic bonds, and __________ bonds. These types of forces are much __________ than the forces of attraction between individual molecules, which are called, ________________ forces

covalent stronger intermolecular

A change in the physical state of a molecular substance does NOT involve the breaking of

covalent bonds

What term is used to describe half the distance between the nuclei of two covalently bonded atoms?

covalent radius

half the distance between the nuclei of two covalently bonded atoms

covalent radius

Half the distance between the nuclei of two covalently bonded atoms is the ______, whereas half the shortest distance between the nuclei of identical nonbonded atoms is the ______.

covalent radius; van der Waals radius

Bonding forces include ionic bonds, metallic bonds, and ___ bonds. These types of forces are much ___ than the forces of attraction between individual molecules, which are called ___ forces.

covalent, stronger, intermolecular

bonding forces include ionic bonds, metallic bonds and ______ bonds. these types of forces are much _____ than the forces of attraction between individual molecules, which are called ________ forces.

covalent, stronger, intermolecular

Solids that have well defined shapes due to the orderly arrangement of their particles are called ___ solids, whereas solids whose particles lack orderly placement and therefore have poorly defined shapes are ___ solids

crystalline, amorphous

Compounds that maintain an orderly arrangement of particles in the liquid phase are known as liquid __

crystals

A p-type semiconductor is formed by doping silicon with any Group 3A element. This ___the number of valence electrons available, creating___sites into which Si electrons can migrate. This increases the conductivity of the material.

decreases, positive

gas → solid

deposition

Polarity

describes the existence of a permanent unequal distribution of charge in a bond or molecule, while polarizability describes the ability of an electron cloud to shift in response to its environment, enhancing or inducing polarity.

Which intermolecular force occurs when two polar molecules orient themselves so that the positive end of one molecule attracts the negative end of the adjacent end of the other?

dipole dipole

The attraction between an ion and a nearby polar molecule is called an ion -_____ interaction. This attractive force is important when a(n)____ compound dissolves in a polar solvent such as H2O.

dipole, ionic

The attraction between an ion and a nearby polar molecule is called an ion-___interaction. This attraction force is important when a(n)___ compound dissolves in a polar solvent such as H2O

dipole, ionic

- dipole-dipole forces are the forces of attraction between two polar molecules - for two compounds of similar molar mass, the greater the molecular dipole moment, the stronger the dipole-dipole forces

dipole-dipole forces

CH3F

dipole-dipole forces

interparticle force present in: CH₃F

dipole-dipole forces

Which intermolecular force do all particles experience?

dispersion

all particles experience ______ forces, a weak attraction that results from induced electron cloud distortion. These forces increase the overall attraction between particles. The more polarized a particle is, the ______ this effect will be

dispersion greater

C3H8

dispersion forces

interparticle force present in: C₃H₈

dispersion forces

All particles experience ___ forces, a weak attraction that results from induced electron cloud distortion. These forces increase the overall attraction between particles. The more polarized a particle, the ___ this effect will be.

dispersion, greater

All particles experience __________ forces, a weak attraction that results from induced electron cloud distortion. These forces increase the overall attraction between particles. The more polarizable a particle is, the ________ this effect will be.

dispersion, stronger

All particles experience_____ forces, a weak attraction that results from induced electron cloud distortion. These forces increase the overall attraction between particles. The more polarizable a particle is, the ______this effect will be.

dispersion, stronger

p-type

doped with a group 3A element

n-type

doped with a group 5A element

potential energy

draws particles together due to forces of attraction; dominates in the solid phase

Heat is added or removed but temperature remains the same.

during a phase change

Fluorine, nitrogen, and oxygen are essential to hydrogen bonding because these elements from the top right portion of the periodic table are so ______ and so ______.

electronegative; small

Luster

electrons absorb and release photons as they move between the valence and conduction bands

If a liquid is placed in a closed container, molecules with sufficient ___will move from the liquid to the gas phase. Gas phase molecules will in turn condense. Eventually the ___ of evaporation and condensation will be equal and the system is said to have reached phase___.

energy, rates, equilibrium

The boiling point of a substance is the temperature at which the vapor pressure of the substance is ___ the external pressure; hence the boiling point depends on the applied pressure.

equal to

The boiling point of a substance is the temperature at which the vapor pressure of the substance is _____ the external pressure; hence the boiling point depends on the applied pressure.

equal to

The boiling point of a substance is the temperature at which the vapor pressure of the substance is ___________ the external pressure

equal to

The phase changes of many substances are reversible and a phase change, just like a chemical reaction, may reach ______ providing it takes place in a(n) ______ system.

equilibrium, closed

The phase changes of many substances are reversible and a phase change, just like a chemical reaction, may reach ___providing it takes place in a(n)___system.

equilibrium, closed

The phase changes of many substances are reversible and a phase change, just like a chemical reaction, may reach ________ proving it take place in a(n) ______ system.

equilibrium, closedrhw

Condensation and freezing are ______ phase changes, whereas melting, vaporization, and sublimation are ______ changes.

exothermic, endothermic

Condensation, freezing, and deposition are ______ phase changes, whereas melting, vaporization, and sublimation are ______ changes.

exothermic, endothermic

Condensation, freezing, and deposition are _____ phase changes, whereas melting, vaporization, and sublimation are _____ changes. Multiple choice question.

exothermic; endothermic

Condensation, freezing, and deposition are _____ phase changes, whereas melting, vaporization, and sublimation are _____ changes.

exothermic; endothermic Reason: Condensation, freezing, and deposition are phases in which intermolecular attractions overcome movement. These changes require the release of heat energy as kinetic energy decreases. Melting, vaporization, and sublimation require heat energy to be absorbed in order for kinetic energy to increase and overcome intermolecular attractions.

Molecular

fairly soft with low melting points, poor conduction of heat and electricity

True or False: Dispersion forces are exhibited only by nonpolar molecules.

false

liquid → solid

freezing

Energy of motion is high compared to the attraction between particles; particles are far apart.

gas

The surface tension of a liquid will be ___ for a liquid with stronger forces of attraction between its particles.

greater

The larger a molecule or atom, the ___ the number of electrons and the ___ polarized it will generally be. The strength of the dispersion forces for a particular substance therefore generally ___ as molar mass increases, providing molecules of similar shape are compared.

greater, more, increases

The larger a molecule or atom, the _____ the number of electrons and the _____ polarizable it will generally be. The strength of the dispersion forces for a particular substance therefore generally _____ as molar mass increases, providing molecules of similar shape are compared

greater; more; increases

What is covalent radius?

half the distance between the nuclei of two covalently bonded atoms

What is van der Waals radius?

half the shortest distance between the nuclei of two identical non bonded atoms

Ionic

hard and brittle with high melting points, good thermal and electrical conductivity in the molten phase.

within a phase...

heat change causes a temperature change

during a phase change ...

heat is added or removed but temperature remains the same

A heating-cooling curve shows the changes that occur when _____ is added to or removed from a sample of matter at a _______ rate.

heat, constant

A heating-cooling curve shows the changes that occur when ______ is added to or removed from a sample of matter at a ______ rate.

heat, constant

q=nΔH°(change)

heating or cooling during a phase change

There are two equations used to calculate the heat gained/lost by a substance. Match each equation to its correct application. Instructions

heating or cooling during a phase change: q = nΔHochange heating or cooling within a phase if mass is given: q = msΔT

q=mcΔT

heating or cooling within a phase if mass is given

q=nCΔT

heating or cooling within a phase if moles are given

Colloid

heterogeneous two or more phases

The resistance of large bodies of water to changes in temperature with the input of energy (typically radiant solar energy) is a result of water's ___

high specific heat of vaporization

Since H2O is able to exhibit different types of intermolecular forces including hydrogen bonding, this substance has a _____ heat capacity and a _____ heat of vaporization compared to other liquids.

high, high

Since H2O is able to exhibit different types of intermolecular forces including hydrogen bonding, this substance has a ______ hear capacity and a _______ heat of vaporization compared to other liquids.

high, high

Since H2O is able to exhibit different types of intermolecular forces including hydrogen bonding, this substance has a ___ heat capacity and a ___ heat of vaporization compared to other liquids.

high; high

What is polarizability?

how well the electron cloud around an atom responds to change in its electronic environment

CH3OH

hydrogen bonding

interparticle force present in: CH₃OH

hydrogen bonding

"polarization"

implies a permanent unequal distribution of charge in a bond or molecule, while polarizability describes the ability of an electron cloud to shift in response to its environment, enhancing or inducing polarity.

An increase in temperature will cause the vapor pressure of a substance to _____.

increase

An increase in temperature will cause the vapor pressure of a substance to ______.

increase

An increase in the temperature of a substance will___ the fraction of molecules that have enough kinetic energy to escape the liquid phase and will therefore cause a(n)___in vapor pressure.

increase, increase

An increase in the temperature of a substance will ______ the fraction of molecules that have enough kinetic energy to escape the liquid phase and will therefore cause a(n) ______ in the vapor pressure.

increase, increase (note: An increase in temperature causes an increase in vapor pressure.)

If the external pressure on a liquid is increased, the vapor pressure of the liquid must _____ in order for the liquid to boil. The molecules of the liquid require _____ kinetic energy so that more of them can escape the liquid phase. The boiling point of the liquid is therefore _____ when the external pressure is increased.

increase, more, higher

If the external pressure on a liquid is increased, the vapor pressure of the liquid must___ in order for the liquid to boil. The molecules of the liquid require___ kinetic energy so that more of them can escape the liquid phase. The boiling point of the liquid is therefore ___ when the external pressure is increased.

increase, more, higher

An increase in the temperature of a substance will _____ the fraction of molecules that have enough kinetic energy to escape the liquid phase and will therefore cause a(n) _____ in the vapor pressure.

increase; increase

Atomic solid

individual atoms held together by dispersion forces

Molecular solid

individual molecules held together by various combinations of intermolecular forces

A momentary change in the electron density surrounding an atom or a molecule causes it to have a(n)_____ dipole even if it is not normally polar. This induces a similar effect in a nearby molecule or atom, and there will be a weak attraction between the two particles as a result. These weak interactions are called ______forces or London forces.

instantaneous dispersion

a momentary change in the electron density surrounding an atom or a molecule causes it to have a(n) __________ dipole even if it is not normally polar. This induces a similar effect in a nearby molecule or atom and there will be a weak attraction between the two particles as a result. These weak interactions are called ___________ forces or London dispersion.

instantaneous dispersion

A momentary change in the electron density surrounding an atom or a molecule causes it to have a(n)___ dipole even if it is not normally polar. This induces a similar effect in a nearby molecule or atom and there will be a weak attraction between the two particles as a result. These weak interactions are called ___ forces or London forces.

instantaneous, dispersion

A momentary change in the electron density surrounding an atom or or a molecule causes it to have a(n) ________ dipole even if it is not normally polar. This induces a similar effect in a nearby molecule or atom and there will be a weak attraction between the two particles as a result. These weak interactions are called _______ or London forces.

instantaneous, dispersion

Cohesive forces

intermolecular forces within the liquid itself

Are covalent bonds intermolecular or intramolecular forces?

intramolecular forces

Match each statement about forces of attraction to the correct description. Covalent bonds are classified as matches Intermolecular forces The physical state of a molecular substance at a particular temperature and pressure depends on the strength of its matches A change in the physical state of a molecular substance does NOT involve the breaking of

intramolecular forces are the forces of attraction between one individual molecule and another intermolecular forces covalent bonds

In a molecular substance, the covalent bonds between the atoms hold the individual molecule together as a unit and are referred to as ______ forces. The nonbinding forces of attraction between one individual molecular and another are called ______ forces. The physical behavior of the phases of matter reflect the difference in the strength of their ______.

intramolecular, intermolecular, intermolecular forces

In a molecular substance, the covalent bonds between the atoms hold the individual molecule together as a unit and are referred to as _____ forces. The nonbonding forces of attraction between one individual molecule and another are called _____ forces. The physical behavior of the phases of matter reflect the difference in the strength of their _____.

intramolecular; intermolecular; intermolecular forces

In a molecular substance, the covalent bonds between the atoms hold the individual molecule together as a unit and are referred to as _____ forces. The nonbonding forces of attraction between one individual molecule and another are called _____ forces. The physical behavior of the phases of matter reflect the difference in the strength of their _____. Multiple choice question.

intramolecular; intermolecular; intermolecular forces

What is the strongest type of dipole bond

ion dipole

the attraction between an ion and a nearby polar molecule is called an ion-_______ interaction. This attractive force is important when a(n) ______ compound dissolves in a polar solvent such as H2O

ion-dipole ionic compound

CaCl2

ionic bonding

interparticle force present in: CaCl₂

ionic bonding

tends to disperse the particles of a substance; dominates in the gas phase

kinetic energy

If a liquid is placed in a closed container, molecules with sufficient ______ will move from the liquid to the gas phase. Gas phase molecules will in turn condense. Eventually the ______ of evaporation and condensation will be equal and the system is said to have reached phase ______.

kinetic energy, rates, equilibrium

As the temperature of a substance increases, the average ______energy of its particles also increase, and movement overcome forces of _____ more easily. As temperature decrease, particles move more slowly, and the _____ forces between particles dominate

kinetic, attraction, attractive

The melting point of a substance is the temperature at which the particles have enough ___ energy to break free from the ___ phase and enter the ___ phase.

kinetic, solid, liquid

The melting point of a substance is the temperature at which the particles have enough ______ energy to break free from the ______ phase and enter the ______ phase.

kinetic, solid, liquid (Note: Substances require enough kinetic energy to break the strong intermolecular forces in the solid phase and escape into the liquid phase.)

The particles in a crystal are arranged in an orderly #-D array called the crystal _______. The simplest recreation unit of the crystal is called the unit _____.

lattice, cell

The particles in a crystal are arranged in an orderly 3-D array called the crystal ___. The simplest repeating unit of the crystal is called the unit___.

lattice, cell

Is a smaller atom or ion more or less polarizable than a larger one? Hint: think about the distance the electrons are to the nucleus and how tightly they are held of small atoms/ions versus larger ones

less polarizable

Unlike most other substances, the density of solid H2O is ______ than the density of liquid; hence water ______ when it freezes. This is reflected in the phase diagram for H2O (shown). The solid-liquid boundary line has a negative slope, reflecting the fact that the higher the pressure the ______ the temperature at which the water freezes.

less, expands, lower

Unlike most other substances, the density of solid H2O is___ than the density of the liquid; hence water ___ when it freezes. This is reflected in the phase diagram for H2O. The solid-liquid boundary line has a negative slope, reflecting the fact that the higher the pressure the ___ the temperature at which the water freezes.

less, expands, lower

The forces of attraction between particles are appreciable; fixed volume; freedom of movement allows fluidity.

liquid

enthalpy change of: ∆H vap

liquid → gas

enthalpy change of: -∆H fus

liquid → solid

ΔH(vap)

liquid→gas

-ΔH(fus)

liquid→solid

At ___ temperature the forces of attraction between particles dominate because the particles are moving slowly. At ___ temperatures the movement of the particles overcomes the attractions.

lower, higher

At ______ temperatures the forces of attraction between particles dominate because the particles are moving slowly. At ______ temperatures the movement of the particles overcomes the attractions.

lower, higher

At _____ temperatures the forces of attraction between particles dominate because the particles are moving slowly. At _____ temperatures the movement of the particles overcomes the attractions.

lower; higher

In general, ΔHofus is _____ than ΔHovap for a given substance because it takes _____ energy to overcome the forces holding the molecules in fixed positions (i.e., melt the substance) than to separate the molecules completely from each other (i.e., vaporize the substance).

lower; less

In general, ΔHofus is _____ than ΔHovap for a given substance because it takes _____ energy to overcome the forces holding the molecules in fixed positions (i.e., melt the substance) than to separate the molecules completely from each other (i.e., vaporize the substance). Multiple choice question.

lower; less

solid → liquid

melting/fusion

what is the relationship between molecular shape and the strength of dispersion forces

molecules with a large surface area have more points of contact and therefore experience stronger dispersion

Which option correctly reflects the relationship between molecular shape and the strength of dispersion forces?

molecules with a large surface area have more points of contact and therefore experience stronger dispersion forces

What is the relationship between molecular shape and the strength of dispersion forces?

molecules with a large surface area have more points of contact and therefore experience stronger dispersion forces.

If a molecular substance has strong intermolecular forces the molecules at the surface of the liquid are held _______ tightly and vaporize ______ easily than molecules with weaker intermolecular forces. The amount of substance in the vapor phase will be _______ than for molecules with weak intermolecular forces and the vapor pressure will therefore be _____

more less less lower

If a molecular substance has strong intermolecular forces the molecules at the surface of the liquid are held ______ tightly and vaporize ______ easily than the molecules with weaker intermolecular forces. The amount of substance in the vapor phase will be ______ than for molecules with weak intermolecular forces and the vapor pressure will therefore be ______.

more, less, less, lower

If a molecular substance has strong intermolecular forces, the molecules at the surface of the liquid are held _____ tightly and vaporize _____ easily than molecules with weaker intermolecular forces. The amount of substance in the vapor phase will be _____ than for molecules with weak intermolecular forces and the vapor pressure will therefore be _____.

more, less, less, lower

Molecules with a larger surface area have _____ points of contact between them than molecules with less surface area. This leads to _____ dispersion forces overall.

more, stronger

molecules with a large surface are have ___ points of contact between them than molecules with less surface area. This leads to ___ dispersion forces overall.

more, stronger

when two polar molecules are close to each other they will orient themselves so that the positive pole of one molecule attracts the ________ pole on the adjacent molecule. These intermolecular forces are called __________________ forces

negative dipole-dipole

when two polar molecules are close to each other they will orient themselves so that the positive pole of one molecule attracts the ________ pole on the adjacent molecule. These intermolecular forces are called __________________ forces

negative dipole-dipole

When two polar molecules are close to each other they will orient themselves so that the positive pole of one molecule attracts____ the pole on the adjacent molecule. These intermolecular forces are called_____ -____ forces.

negative dipole-dipole forces

When two polar molecules are close to each other they will orient themselves so that the positive pole of one molecule attracts the _______ pole on the adjacent molecule. These intermolecular forcesc are called ________-________ forces.

negative, dipole, dipole

When two polar molecules are close to each other they will orient themselves so that the positive pole of one molecule attracts the ___ pole on the adjacent molecule. These intermolecular forces are called ___ - ___ forces.

negative, dipole-dipole

When hydrogen is covalently bonded to______ , oxygen, or fluorine there will be an attraction between such a hydrogen and a(n) _________pair of electrons on a nitrogen, oxygen, or fluorine atom on an adjacent molecule. This attraction is called a(n)_______ bond, and it is the strongest type of intermolecular force between neutral species.

nitrogen lone hydrogen

when hydrogen is covalently bonded to ___________, oxygen, or fluorine then the attraction between such a hydrogen and a(n) _____________ pair of electrons on a nitrogen, oxygen, or fluorine atom on an adjacent molecule. This attraction is called a(n) ____________ bond and it is the strongest type of intermolecular force between neutral species

nitrogen lone hydrogen

When hydrogen is covalent bonded to _______, oxygen, or fluorine there will be an attraction between such a hydrogen and a(n) ______ pair of electrons on a nitrogen, oxygen, or fluorine atom on an adjacent molecule. This attraction is called a(n) ________ bond it is the strongest type of intermolecular force between neutral species.

nitrogen, lone, hydrogen

When hydrogen is covalently bonded to ___, oxygen, or fluorine there will be an attraction between such a hydrogen and a(n) ___ pair of electrons on a nitrogen, oxygen, or fluorine atom on an adjacent molecule. This attraction is called a(n) ___ bond and it is strongest type of intermolecular force between neutral species.

nitrogen, lone, hydrogen

Dispersion forces are the only type on intermolecular force exhibited by atoms and by ___ molecules. Without the existence of dispersion forces, such substances could not exist in the ___ states of matter.

nonpolar, condensed

Match each lettered portion of the following heating curve to the correct description. Instructions

p: The substance is in the solid phase. s: The substance is changing from liquid to vapor. q: Both solid and liquid phases are present. r: The kinetic energy of the liquid particles is increasing. t: The particles are far apart and movement dominates the phase.

A physical state of matter that is chemically and physically uniform is called a(n)

phase

A physical state of matter that is chemically and physically uniform is called a(n) ______.

phase

A physical state of matter that is chemically and physically uniform is called a(n) _____.

phase Reason: A phase change is the conversion of one phase to another. The physical state of matter that is chemically and physically uniform is simply a phase, not a phase change.

The triple point is represented on a phase diagram to show when all three_____of a substance are at______

phases or states equilibrium or dynamic equilibrium

The triple point is represented on a phase diagram to show when all three ______ of a substance are at ______.

phases, equilibrium

The triple point is represented on a phase diagram to show when all three ___of a substance are at ___

phases, equilibrium

The term _____ is used to describe how well the electron cloud around an atom responds to changes in its electronic environment.

polarizability

What term is used to describe how well the electron cloud around an atom responds to change in its electronic environment?

polarizability

Malleability

positive metal ions can move past each other protected by the repulsion of the delocalized electrons

draws particles together due to forces of attraction; dominates in the solid phase

potential energy

For a molecular substance, the ___ energy in the form of intermolecular forces tends to draw molecules together. The __ energy associated with the movement of the molecules tends to disperse them. The relative strength of these two effects determines the behavior of the phase of matter.

potential, kinetic

A sample containing 2.50 g liquid diethyl ether is cooled from 25.5oC to 3.5oC. The substance remains in the liquid phase throughout this change. Select all the options that correctly reflect the calculations needed to determine q for this process. (s for liquid diethyl ether = 172 J/mol.K and its molar mass is 74.12 g/mol.)

q = -0.13 kJ The sample contains 3.37 x 10-2 mol of diethyl ether.

This equation is used for the phase change from gas to liquid.

q = -nΔHovap

What is the equation for heating or cooling within a phase of mass is given

q = mcAT

Which equation should be used to calculate the heat change when a given mass of H2O is heated from 15oC to 95oC?

q = msΔT

Equation for heating or cooling during a phase change

q = nAH of change

Equation for heating or cooling within a phase of moles are given

q = nCAT

Which equation should be used to calculate the heat change when a given molar amount of H2O is heated from 15oC to 95oC?

q = nCΔT

Match each equation for calculating heat lost or gained (q) during a process to its correct application. Heating or cooling within a phase if moles are given Heating or cooling during a phase change Heating or cooling within a phase if mass is given

q = nCΔT q = nΔHchange q = mcΔT

This equation is used for the phase change from liquid to gas.

q = nΔHovap

a 25.0g sample of ice at -6.5C is removed from the freezer and allowed to warm until it melts. Given the data below, what reflects the calculations needed to determine the total heat change for this process. Melting point at 1atm=0.0C; c(solid)=2.09J/g*degreesC; DeltaH(fus)=6.02 kJ/mol

q for the phase change is given by 1.39*6.02=8.37kJ 25g*1mol/18.02g=1.39mol and q=nDeltaH(fus)=1.39*6.02=8.37 The total heat change for the process is equal to +8.71kJ q1=25.0*2.09*6.5=340J or 0.34kJ and q2=1.39*6.05=8.37kJ

Which equation should be used to calculate the heat change when a given mass of H2O is heated from 15*C to 95*C?

q= m*s*deltaT

Solve for the enthalphy change when 45.1g of H2O changes from gas to the liquid phase at 1008c, deltaH vap= 40.7kJ, s = 33.1 J/mol*k

q=(45.1g/18.0153g/mol)*(-40.7kJ) = -102 kJ

heating or cooling within a phase if mass is given

q=mC∆T

Which equation should be used to calculate the heat change when a given molar amount of H2O is heated from 15C to 95C

q=n C deltaT

heating or cooling within a phase if moles are given

q=nC∆T

heating or cooling during a phase change

q=n∆H°change

Energy of movement is low compared to the attraction between particles; particles remain fixed in position relative to each other.

solid

the liquid and ______ states are called the _______ states of matter because their particles are very close together

solid condensed

enthalpy change of: ∆Hsubl

solid → gas

enthalpy change of: ∆Hfus

solid →liquid

The liquid and ___ states are called the ___states of matter because their particles are very close together.

solid, condensed

ΔH(subl)

solid→gas

ΔH(fus)

solid→liquid

What are typical properties of ceramics?

strength, thermal insulation, hardness

The high capillary action of water is a result of its ______.

strong hydrogen bonding

With dispersion, if a particle is more polarizable, will the force be weaker or stronger?

stronger

Intermolecular forces influence the vapor pressure of a substance because the _____ the forces, the more tightly the molecules are held together and the _____ the amount of energy that must be supplied to allow them to break free from the liquid phase.

stronger greater

intermolecular forces influence the vapor pressure of a substance because the ________ the forces the more tightly the molecules are held together, and the _______ the amount of energy that must be supplied to allow them to break free from the liquid phase

stronger greater

Intermolecular forces influence the vapor pressure of a substance because the _____ the forces the more tightly the molecules are held together, and the _____ the amount of energy that must be supplied to allow them to break free from the liquid phase.

stronger, greater

solid → gas

sublimation

The vapor pressure of a given molecular substance is affected by changes in ___ and by the strength of the ___ forces for the substance.

temperature, intermolecular

The vapor pressure of a given molecular substance is affected by changes in _______ and by the strength of the _______ forces for the substance.

temperature, intermolecular

The vapor pressure of a given molecular substance is affected by changes in ________ and by the strength of the _______ forces for the substance.

temperature, intermolecular

A phase diagram is a plot of ______ on the x-axis vs. ______ on the y-axis. This diagram shows the stable regions for each ______ of matter and the conditions under which these may exist in equilibrium.

temperature, pressure, phase

kinetic energy

tends to disperse the particles of a substance; dominates in the gas phase

the _______ pattern (geometry) of H bonding H2O gives ice a very open structure with large _______ between the molecules. Water therefore differs from most liquids because it becomes _____ dense when it freezes

tetrahedral spaces less

The ___pattern of H bonding in H2O gives ice a very open structure with large ___ between the molecules. Water therefore differs from most liquids because it becomes ___ dense when it freezes.

tetrahedral, spaces, less

What is bond length?

the distance between the nuclei of two bonded atoms

Thermal conductivity

the highest energy electrons are excited by heat and the energy is transferred as kinetic energy

Electrical conductivity

the highest energy electrons are excited into empty orbitals allowing them to move readily through a sample

r

the kinetic energy of the liquid particles is increasing

t

the particles are far apart and movement dominates the phase

In hexagonal closest packing

the particles of the third layer lie directly over the particles of the first layer

s

the substance is changing from liquid to vapor

p

the substance is in the solid phase

Which of the following will affect the vapor pressure of a pure molecular substance?

the temperature the strength of the intermolecular forces the structure of the substance

The ______ represents the conditions of pressure and temperature where solid, liquid, and gas phases are stable.

triple point

True or False: A compound containing one or more oxygen atoms is not necessarily capable of forming hydrogen bonds between its molecules.

true

The H2O molecule has ____ covalent O-H bonds and ______ , lone pairs on the oxygen atom. This means that each H2O molecule can form a maximum of _______ , H bonds with neighboring H2O molecules. The hydrogen bonding in H2O is therefore very effective.

two two four

half the shortest distance between the nuclei of two identical nonbonded atoms

van der Waals

What term is used to describe the shortest distance between two non bonded atoms in adjacent molecules?

van der Waals distance

the shortest distance between two non-bonded atoms in adjacent molecules

van der Waals distance

What term is used to describe half the shortest distance distance between the nuclei of two identical non bonded atoms?

van der Waals radius

The pressure exerted by the _____ above a liquid at the equilibrium is called the equilibrium ______ pressure. this pressure ______ as the temperature of the system increases.

vapor, vapor, increases

The pressure exerted by the ______ above a liquid at equilibrium is called the equilibrium ______ pressure. This pressure ______ as the temperature of the system increases.

vapor, vapor, increases

The pressure exerted by the ___ above a liquid is called the equilibrium ___ pressure. This pressure ___ as the temperature of the system increases.

vapor, vapor. increases

liquid → gas

vaporization

Network Covalent

very hard with high melting points but usually poor thermal and electrical conductors.

Heat change causes a temperature change.

within a phase

Select all the statements that correctly describe the molar heat of vaporization for a substance.

ΔHvap is the amount of heat required to vaporize 1 mole of a substance at its boiling point. ΔHvap is a positive quantity. Both the boiling point and ΔHvap of a molecular substance are related to the strength of the intermolecular forces.

For a given material, its enthalpy of fusion is typically much lower than its enthalpy of vaporization because ________.

ΔHvap is the energy required to separate particles completely