MAN 4504

Ace your homework & exams now with Quizwiz!

If annual demand is 35,000 units, the ordering cost is $50 per order and the holding cost is $0.65 per unit per year, which of the following is the optimal order quantity using the fixed-order quantity model? A. 5,060 B. 2,320 C. 2,133 D. 2,004 E. 1,866

Answer: B From equation 17.3, Q = 2,320.5 = Square root of (2 x 35,000 x 50/0.65)

Which of the following is not one of the categories of manufacturing inventory? A. Raw materials B. Finished products C. Component parts D. Just-in-time E. Supplies

Answer: D Manufacturing inventory is typically classified into raw materials, finished products, component parts, supplies, and work-in-process.

Which of the following is fixed-time period inventory model? A. The EOQ model B. The least cost method C. The Q model D. Periodic system model E. Just-in-time model

Answer: D There are two general types of multi-period inventory systems: fixed-order quantity models (also called the economic order quantity, EOQ, and Q-model) and fixed-time period models (also referred to variously as the periodic system, periodic review system, fixed order interval system, and P-model).

Which of the following is not a reason to carry inventory? A. To provide a safeguard for variation in raw material delivery time B. To take advantage of economic purchase-order size C. To maintain independence of operations D. To meet variation in product demand E. To keep the stock out of the hands of competitors

Answer: E All firms keep a supply of inventory for the following reasons: 1. To maintain independence of operations. 2. To meet variation in product demand. 3. To allow flexibility in production scheduling. 4. To provide a safeguard for variation in raw material delivery time. 5. To take advantage of economic purchase order size.

ABC analysis typically requires that inventory be classified according to: A) alphabetical order by item name B) annual dollar volume C) alphabetical order by supplier name D) due date E) none of the above

B) annual dollar volume

Counting items to ensure an order is correct is an example of: A) setup cost B) ordering cost C) carrying cost D) stockout cost E) holding cost

B) ordering cost

Three simple inventory systems often used in practice are: A) Optional replenishment or min/max system B) One-bin system C) Two-bin system D) ABC inventory classification system E) A, B, and C

E) A, B, and C

What is the term for there being no relationship between demands for various items? ____________________________.

Independent demand In independent demand, the demands for various items are unrelated to each other.

Fixed-order quantity inventory systems determine the reorder point, R and the order quantity, Q values.

TRUE The fixed-order quantity system focuses on order quantities and reorder points. (See also exhibit 17.4)

The key difference between a fixed-order quantity inventory model, where demand is known and one where demand is uncertain is in computing the reorder point.

TRUE The key difference between a fixed-order quantity model where demand is known and one where demand is uncertain is in computing the reorder point. The order quantity is the same in both cases.

Using the probability approach we assume that the demand over a period of time is normally distributed.

TRUE Using the probability criterion to determine safety assumes that the demand over a period of time is normally distributed.

One of the drivers of the direct-to-store (direct distribution) approach is the upstream migration of value-added logistics services.

TRUE What accounts for the emergence of the direct-to-store model? Global sourcing and the upstream migration of value-added logistics services are certainly primary drivers.

You should visualize inventory as stacks of money sitting on forklifts, on shelves, and in trucks and planes while in transit.

TRUE You should visualize inventory as stacks of money sitting on forklifts, on shelves, and in trucks and planes while in transit.

If it takes a supplier 10 days to deliver an order once it has been placed and the standard deviation of daily demand is 14, what is the standard deviation of usage during lead time? _________________________________________.

44.27 Using either of the equivalent equations 17.8 (page 571) or 17.12 (Page 574), the answer is the square root of the sum of the variances which is the square root of 10 x (14 squared) or the square root of 1960 or 44.27.

Assuming no safety stock, what is the reorder point (R) given an average daily demand of 100 units and a lead time of 5 days? __________________________________.

500 Equation 17.4, Reorder point = Average daily demand x Lead time in days = 100 x 5 = 500

Cycle counting of inventory is most common for the following reasons except: A) It is the appointed time of the year B) Records show inventory is low or zero C) Records show inventory but a backorder was written D) Some inventory is very valuable or important E) None of the above

A) It is the appointed time of the year

Which of the following is not an assumption of the basic economic-order quantity model? A) annual demand is constant and known B) lead time is constant C) ordering or setup costs are constant D) quantity discounts are available E) no backorders are allowed

A) annual demand is constant and known

When developing inventory cost models, which of the following is not included as costs to place an order? A. Phone calls B. Taxes C. Clerical D. Calculating quantity to order E. Postage

Answer: B There are costs to place an order: labor, phone calls, typing, postage, and so on. Therefore, the larger each order is, the fewer the orders that need to be written. Also, shipping costs favor larger orders—the larger the shipment, the lower the per-unit cost. Ordering costs refer to the managerial and clerical costs to prepare the purchase or production order. Ordering costs include all the details, such as counting items and calculating order quantities. The costs associated with maintaining the system needed to track orders are also included in ordering costs.

Using the fixed-time period inventory model, and given an average daily demand of 300 units, 4 days between inventory reviews, 5 days for lead time, 1,200 units of inventory on hand, a "z" of 1.96, and a standard deviation of demand over the review and lead time of 12 units, what quantity should be ordered? ___________________________________________.

1,525 Using equation 17.11, q = (300 x (5 + 4) + 1.96 x 12) - 1200 =

If annual demand is 8,000 units, the ordering cost is $20 per order and the holding cost is $12.50 per unit per year, what is the optimal order quantity using the fixed-order quantity inventory model? _____________________________________.

160 Using equation 17.3 (page 568) Q = square root of ((2 x demand x order cost)/holding cost = Square root ((2 x 8,000 x 20)/12.50) = Square root (25,600) = 160

The basic difference between Periodic systems (P-model) and Fixed-order quantity systems (Q-model) is: A) Q models are event triggered while P models are time triggered B) Q models are time triggered while P models are event triggered C) P models favor more expensive items D) P model is more appropriate for important items such as critical repair parts E) None of the above

A) Q models are event triggered while P models are time triggered

Independent demand is: A) inventory whose demand comes from independent suppliers B) inventory that is independent of any known rules of demand and supply C) demand that is related to the demand for another item D) demand determined by the marketplace that requires forecasting E) none of the above

A) inventory whose demand comes from independent suppliers

What are the five purposes of inventory? 1. _______________________________ 2. _______________________________ 3. _______________________________ 4. _______________________________ 5. _______________________________.

All firms keep a supply of inventory for the following reasons: 1. To maintain independence of operations. 2. To meet variation in product demand. 3. To allow flexibility in production scheduling. 4. To provide a safeguard for variation in raw material delivery time. 5. To take advantage of economic purchase order size.

If a vendor has correctly used marginal analysis to select their stock levels for the day (as in the newsperson problem), and the profit resulting from the last unit being sold (Cu) is $0.90 and the loss resulting from that unit if it is not sold (Co) is $0.50, which of the following is the probability of the last unit being sold? A. Greater than 0.357 B. Greater than 0.400 C. Greater than 0.556 D. Greater than 0.678 E. None of the above

Answer: A From equation 17.1 (Page 563) P < = Cu/(Cu + Co) = 0.90/1.40 = 0.643. Since P is the probability that the unit will not be sold and 1 - P is the probability of it being sold, the answer to this question is 1 - 0.643 or 0.357

What is the name of a physical inventory-taking technique that focuses only on certain items and counts more often than once or twice a year? ______________________________________.

Cycle counting Cycle counting is a physical inventory-taking technique in which inventory is counted frequently rather than once or twice a year

In the basic fixed-order quantity model, if annual demand doubles, the effect on the Optimal Order Quantity (EOQ) is: A) it doubles B) it is half its previous amount C) it is about 70% of its previous amount D) decreases by a factor of 2 E) it increases by about 40%

E) it increases by about 40%

The "sawtooth effect," is named after the jagged shape of the graph of inventory levels over time.

TRUE The "sawtooth effect" relating Q and R in Exhibit 17.5 shows that when the inventory position drops to point R, a reorder is placed.

Fixed-order quantity inventory models are "event triggered."

TRUE The basic distinction is that fixed-order quantity models are "event triggered" and fixed-time period models are "time triggered."

Fixed-time period inventory models are "time triggered."

TRUE The basic distinction is that fixed-order quantity models are "event triggered" and fixed-time period models are "time triggered."

Using the fixed-order quantity model, what is the total ordering cost of inventory given an annual demand of 36,000 units, a cost per order of $40 and a holding cost per unit per year of $45? ______________________________________________.

$5,692 * (See instructor note, below.) Using equation 17.3 (page 568) Q = square root of ((2 x demand x order cost)/holding cost = Square root ((2 x 36,000 x 40)/45) = Square root (64,000) = 252.98. Dividing annual demand by Q, 36,000/ 252.98 = 142.3 orders per year x $40 per order = $5,692 ordering cost per year. ( * Note to instructors: The answer given above is correct. If, however, your student rounds 142.3 orders per year to 142 orders, the answer is $5,680. We are inclined to accept either answer.

Which of the following is not included as an inventory holding cost? A. Annualized cost of materials B. Handling C. Insurance D. Pilferage E. Storage facilities

Answer: A Holding costs include the costs for storage facilities, handling, insurance, pilferage, breakage, obsolescence, depreciation, taxes, and the opportunity cost of capital.

In order to determine the standard deviation of usage during lead time in the reorder point formula for a fixed-order quantity inventory model which of the following must be computed first? A. Standard deviation of daily demand B. Number of standard deviations for a specific service probability C. Stockout cost D. Economic order quantity E. Safety stock level

Answer: A See equation 17.8.

Which of the following are the recommended percentage groupings of the ABC classifications of the dollar volume of products? A. A items get 15%, B items get 35%, and C items get 50% B. A items get 15%, B items get 45%, and C items get 40% C. A items get 25%, B items get 35%, and C items get 40% D. A items get 25%, B items get 15%, and C items get 60% E. A items get 20%, B items get 30%, and C items get 50%

Answer: A The ABC approach divides this list into three groupings by value: A items constitute roughly the top 15 percent of the items, B items the next 35 percent, and C items the last 50 percent.

Using the fixed-time period inventory model, and given an average daily demand of 75 units, 10 days between inventory reviews, 2 days for lead time, 50 units of inventory on hand, a service probability of 95 percent, and a standard deviation of demand over the review and lead time of 8 units, which of the following is the order quantity? A. 863 B. 948 C. 1,044 D. 1,178 E. 4,510

Answer: A The z score for a service probability of 95% is 1.64. Using equation 17.11 (page 573) q = 75 x (10 + 2) + (1.64 x 8) - 50 = 900 + 13.12 - 50 = 863.12 = 863

Which of the following is fixed-order quantity inventory model? A. Economic order quantity model B. The ABC model C. Periodic replenishment model D. Cycle counting model E. P model

Answer: A There are two general types of multi-period inventory systems: fixed-order quantity models (also called the economic order quantity, EOQ, and Q-model) and fixed-time period models (also referred to variously as the periodic system, periodic review system, fixed order interval system, and P-model).

A company is planning for its financing needs and uses the basic fixed-order quantity inventory model. Which of the following is the total cost (TC) of the inventory given an annual demand of 10,000, setup cost of $32, a holding cost per unit per year of $4, an EOQ of 400 units, and a cost per unit of inventory of $150? A. $1,501,600 B. $1,498,200 C. $500,687 D. $499,313 E. None of the above

Answer: A Use equation 17.2 on page 567. Q = 400. Average Inventory = Q/2 = 200. Holding cost/year = $4. Thus, annual holding cost = $800. Annual set-up cost = 10,000/400 = 25 x $32 = 800. Demand x cost per unit = 10,000 x $150 = 1,500,000. Hence, TC = $1,500,000 + 800 + 800 = $1,501,600.

You would like to use the fixed-time period inventory model to compute the desired order quantity for a company. You know that vendor lead time is 5 days and the number of days between reviews is 7. Which of the following is the standard deviation of demand over the review and lead time if the standard deviation of daily demand is 8? A. About 27.7 B. About 32.8 C. About 35.8 D. About 39.9 E. About 45.0

Answer: A Using equation 17.12 (Page 574), The standard deviation of demand over the 12 days time between reviews and lead time is the square root of (12 x 64) = 27.71.

Using the probability approach to determine an inventory safety stock and wanting to be 95 percent sure of covering inventory demand, which of the following is the number of standard deviations necessary to have the 95 percent service probability assured? A. 1.28 B. 1.64 C. 1.96 D. 2.00 E. 2.18

Answer: B Companies using this approach generally set the probability of not stocking out at 95 percent. This means we would carry about 1.64 standard deviations of safety stock.

To take into consideration demand uncertainty in reorder point (R) calculations, what do we add to the product of the average daily demand and lead time in days when calculating the value of R? A. The product of average daily demand times a standard deviation of lead time. B. A "z" value times the lead time in days. C. The standard deviation of vendor lead time times the standard deviation of demand. D. The product of lead time in days times the standard deviation of lead time. E.The product of the standard deviation of demand variability and a "z" score relating to a specific service probability.

Answer: B For example, suppose we computed the standard deviation of demand to be 10 units per day. If our lead time to get an order is five days, the standard deviation for the five-day period, assuming each day can be considered independent, is (equation 17.8) and multiplied by the z-score (equation 17.9).

If annual demand is 12,000 units, the ordering cost is $6 per order and the holding cost is $2.50 per unit per year, which of the following is the optimal order quantity using the fixed-order quantity model? A. 576 B. 240 C. 120.4 D. 60.56 E. 56.03

Answer: B From equation 17.3, Q = 240 = Square root of (2 x 12,000 x 6/2.5)

If annual demand is 50,000 units, the ordering cost is $25 per order and the holding cost is $5 per unit per year, which of the following is the optimal order quantity using the fixed-order quantity model? A. 909 B. 707 C. 634 D. 500 E. 141

Answer: B From equation 17.3, Q = 707.1 = Square root of (2 x 50,000 x 25/5)

If it takes a supplier four days to deliver an order once it has been placed and the standard deviation of daily demand is 10, which of the following is the standard deviation of usage during lead time? A. 10 B. 20 C. 40 D. 100 E. 400

Answer: B From equation 17.8, The standard deviation of usage during lead time is equal to the square root of the sums of the variances of the number of days of lead time. Since variance equals standard deviation squared, the standard deviation of usage during lead time is the square root of 4(10x10) = square root of 400 = 20.

Which of the following is usually included as an inventory holding cost? A. Order placing B. Breakage C. Typing up an order D. Quantity discounts E. Annualized cost of materials

Answer: B Holding costs include the costs for storage facilities, handling, insurance, pilferage, breakage, obsolescence, depreciation, taxes, and the opportunity cost of capital.

Which of the following is one of the categories of manufacturing inventory? A. Economic Order Inventory B. Work-in-process C. Quality units D. JIT Inventory E. Re-order point

Answer: B Manufacturing inventory is typically classified into raw materials, finished products, component parts, supplies, and work-in-process.

Assuming no safety stock, what is the reorder point (R) given an average daily demand of 78 units and a lead time of 3 days? A. 421 B. 234 C. 78 D. 26 E. 312

Answer: B See equation 17.4. 78 times 3 = 234

Assuming no safety stock, what is the re-order point (R) given an average daily demand of 50 units, a lead time of 10 days and 625 units on hand? A. 550 B. 500 C. 715 D. 450 E. 475

Answer: B See equation 17.4. Fifty (50) times ten (10) equals 500

Computer inventory systems are often programmed to produce a cycle count notice in which of the following case? A. When the record shows a near maximum balance on hand B. When the record shows positive balance but a backorder was written C. When quality problems have been discovered with the item D. When the item has become obsolete E. When the item has been misplaced in the stockroom

Answer: B The computer can be programmed to produce a cycle count notice in the following cases: 1. When the record shows a low or zero balance on hand. 2. When the record shows a positive balance but a backorder was written 3. After some specified level of activity. 4. To signal a review based on the importance of the item (as in the ABC system).

Which of the following is a perpetual system for inventory management? A. Fixed-time period B. Fixed-order quantity C. P model D. First-in-first-out E. The wheel of inventory

Answer: B The fixed-order quantity model is a perpetual system, which requires that every time a withdrawal from inventory or an addition to inventory is made, records must be updated to reflect whether the reorder point has been reached.

If it takes a supplier two days to deliver an order once it has been placed and the daily demand for three days has been 120, 124, and 125, which of the following is the standard deviation of usage during lead time? A. About 2.16 B. About 3.06 C. About 4.66 D. About 5.34 E. About 9.30

Answer: B The standard deviation (Equation 17.6) of daily demand = Square root of (14/3) = 2.1602. This number squared is 4.6667. The square root of (2 (days) times 4.6667) = the square root of 9.3333 or 3.055. * (Note to instructor: The Feedback above is based on the text's equation 17.6 which calculates standard deviation based on a denominator of "n" rather than the classic statistical "n-1." If the n-1 formulation is used the result would be SD = SQRT 7. Variance, then is 7. 2 x 7 = 14 and SQRT 14 = 3.742 which would be the appropriate response. If your students are inclined to use the classical statistical formulation of standard deviation you should adjust the choices appropriately.)

Using the fixed-time period inventory model, and given an average daily demand of 200 units, 4 days between inventory reviews, 5 days for lead time, 120 units of inventory on hand, a "z" of 1.96, and a standard deviation of demand over the review and lead time of 3 units, which of the following is the order quantity? A. About 1,086 B. About 1,686 C. About 1,806 D. About 2,206 E. About 2,686

Answer: B Using equation 17.11, q = (200 x (5 + 4) + 1.96 x 3) - 120 = 1,800 + 5.88 - 120 = 1,685.88 = about 1,686

A company has recorded the last six days of daily demand on a single product they sell. Those values are 37, 115, 93, 112, 73, and 110. The time from when an order is placed to when it arrives at the company from its vendor is 3 days. Assuming the basic fixed-order quantity inventory model fits this situation and no safety stock is needed, which of the following is the reorder point (R)? A. 540 B. 270 C. 115 D. 90 E. 60

Answer: B Using equation 17.4, Average demand is 37 + 115 + 93 + 112 + 73 + 110/6 = 90. Lead time = 3 days so the reorder point is 90 x 3 = 270.

If it takes a supplier 25 days to deliver an order once it has been placed and the standard deviation of daily demand is 20, which of the following is the standard deviation of usage during lead time? A. 50 B. 100 C. 400 D. 1,000 E. 1,600

Answer: B Using equation 17.8 (page 571), the standard deviation of usage during lead time will be the square root of 25 x (20 x 20) = square root of 10,000 = 100.

Firms keep supplies of inventory for which of the following reasons? A. To maintain dependence of operations B. To provide a feeling of security for the workforce C. To meet variation in product demand D. To hedge against wage increases E. In case the supplier changes the design

Answer: C All firms keep a supply of inventory for the following reasons: 1. To maintain independence of operations. 2. To meet variation in product demand. 3. To allow flexibility in production scheduling. 4. To provide a safeguard for variation in raw material delivery time. 5. To take advantage of economic purchase order size.

If a vendor has correctly used marginal analysis to select their stock levels for the day (as in the newsperson problem), and the profit resulting from the last unit being sold (Cu) is $120 and the loss resulting from that unit if it is not sold (Co) is $360, which of the following is the probability of the last unit being sold? A. Greater than 0.90 B. Greater than 0.85 C. Greater than 0.75 D. Greater than 0.25 E. None of the above

Answer: C From equation 17.1 (Page 563) P < = Cu/(Cu + Co) = 120 /480 = 0.25. Since P is the probability that the unit will not be sold and 1 - P is the probability of it being sold, the answer to this question is 1 - 0.25 or 0.75.

Using the fixed-time period inventory model, and given an average daily demand of 15 units, 3 days between inventory reviews, 1 day for lead time, 30 units of inventory on hand, a service probability of 98 percent, and a standard deviation of daily demand is 3 units, which of the following is the order quantity? A. About 30.4 B. About 36.3 C. About 42.3 D. About 56.8 E. About 59.8

Answer: C The z score for a desired service probability of 98% is 2.053. From equation 17.12 (Page 574), the standard deviation during review and lead time is the square root of (4 * 3 squared) which is 6. Using equation 17.11 (page 573) q = 15 x (3 + 1) + (2.05x 6) - 30 = 60 + 12.3 - 30 = 42.3

Which of the following is an assumption of the basic fixed-order quantity inventory model? A. Lead times are averaged B. Ordering costs are variable C. Price per unit of product is constant D. Back orders are allowed E. Stock-out costs are high

Answer: C These assumptions are unrealistic, but they represent a starting point and allow us to use a simple example: Demand for the product is constant and uniform throughout the period. Lead time (time from ordering to receipt) is constant. Price per unit of product is constant. Inventory holding cost is based on average inventory. Ordering or setup costs are constant. All demands for the product will be satisfied. (No backorders are allowed.)

Which of the following is not an assumption of the basic fixed-order quantity inventory model? A. Ordering or setup costs are constant B. Inventory holding cost is based on average inventory C. Diminishing returns to scale of holding inventory D. Lead time is constant E. Demand for the product is uniform throughout the period

Answer: C These assumptions are unrealistic, but they represent a starting point and allow us to use a simple example: Demand for the product is constant and uniform throughout the period. Lead time (time from ordering to receipt) is constant. Price per unit of product is constant. Inventory holding cost is based on average inventory. Ordering or setup costs are constant. All demands for the product will be satisfied. (No backorders are allowed.)

The Pareto principle is best applied to which of the following inventory systems? A. EOQ B. Fixed-time period C. ABC classification D. Fixed-order quantity E. Single-period ordering system

Answer: C This logic of the few having the greatest importance and the many having little importance has been broadened to include many situations and is termed the Pareto principle. Most inventory control situations involve so many items that it is not practical to model and give thorough treatment to each item. To get around this problem, the ABC classification scheme divides inventory items into three groupings: high dollar volume (A), moderate dollar volume (B), and low dollar volume (C).

Which of the following is the set of all cost components that make up the fixed-order quantity total annual cost (TC) function? A. Annual purchasing cost, annual ordering cost, fixed cost B. Annual holding cost, annual ordering cost, unit cost C. Annual holding cost, annual ordering cost, annual purchasing cost D. Annual lead time cost, annual holding cost, annual purchasing cost E. Annual unit cost, annual set up cost, annual purchasing cost

Answer: C Total Annual Cost = Annual Purchase Cost + Annual Ordering Cost + Annual Holding Cost

You would like to use the fixed-time period inventory model to compute the desired order quantity for a company. You know that vendor lead time is 10 days and the number of days between reviews is 15. Which of the following is the standard deviation of demand over the review and lead time period if the standard deviation of daily demand is 10? A. 25 B. 40 C. 50 D. 73 E. 100

Answer: C Using equation 17.12 (Page 574), The standard deviation of demand over the 25 days time between reviews and lead time is the square root of (25 x 100) = 50.

A company has recorded the last five days of daily demand on their only product. Those values are 120, 125, 124, 128, and 133. The time from when an order is placed to when it arrives at the company from its vendor is 5 days. Assuming the basic fixed-order quantity inventory model fits this situation and no safety stock is needed, which of the following is the reorder point (R)? A. 120 B. 126 C. 630 D. 950 E. 1,200

Answer: C Using equation 17.4, Average demand is 120 + 125 + 124 + 128 + 133/5 = 126. Lead time = 5 days so the reorder point is 126 x 5 = 630.

Which of the following values for "z" should we use in as safety stock calculation if we want a service probability of 98%? A. 1.64 B. 1.96 C. 2.05 D. 2.30 E. None of the above

Answer: C Using the Excel function NORMSINV, the z score for a 98% service probability is 2.05.

A company wants to determine its reorder point (R). Demand is variable and they want to build a safety stock into R. If the average daily demand is 12, the lead time is 5 days, the desired "z" value is 1.96, and the standard deviation of usage during lead time is 3, which of the following is the desired value of R? A. About 6 B. About 16 C. About 61 D. About 66 E. About 79

Answer: D A company wants to determine its reorder point (R). Demand is variable and they want to build a safety stock into R. If the average daily demand is 12, the lead time is 5 days, the desired "z" value is 1.96, and the standard deviation of usage during lead time is 3, which of the following is the desired value of R? A. About 6 B. About 16 C. About 61 D. About 66 E. About 79

A company wants to determine its reorder point (R). Demand is variable and they want to build a safety stock into R. The company wants to have a service probability coverage of 95 percent. If average daily demand is 8, lead time is 3 days, and the standard deviation of usage during lead time is 2, which of the following is the desired value of R? A. About 17.9 B. About 19.7 C. About 24.0 D. About 27.3 E. About 31.2

Answer: D Desired z score for service probability coverage of 95% = 1.64. Equation 17.5 (Page 571) is (average daily demand times number of days of lead time) plus (standard deviation during lead time) times (desired z score) = (8 x 3) + (2x1.64) = 24 + 3.28 = 27.28 = about 27.3 units

Which of the following is not necessary to compute the order quantity using the fixed-time period model with safety stock? A. Forecast average daily demand B. Safety stock C. Inventory currently on hand D. Ordering cost E. Lead time in days

Answer: D Equation 17.11 is for a fixed-time period system with safety stock. It requires 1. The number of days between reviews 2. Lead time in days (time between placing an order and receiving it) 3. Forecast average daily demand 4. Number of standard deviations for a specified service probability 5. Standard deviation of demand over the review and lead time 6. Current inventory level (includes items on order)

In making any decision that affects inventory size, which of the following costs do not need to be considered? A. Holding costs B. Setup costs C. Ordering costs D. Fixed costs E. Shortage costs

Answer: D In making any decision that affects inventory size, the following costs must be considered. 1. Holding (or carrying) costs. 2. Setup (or production change) costs. 3. Ordering costs. 4. Shortage costs.

Using the ABC classification system for inventory, which of the following is a true statement? A. The "C" items are of moderate dollar volume B. You should allocate about 15% of the dollar volume to "B" items C. The "A" items are of low dollar volume D. The "A" items are of high dollar volume E. Inexpensive and low usage items are classified as "C" no matter how critical

Answer: D The ABC classification scheme divides inventory items into three groupings: high dollar volume (A), moderate dollar volume (B), and low dollar volume (C).

Using the fixed-order quantity model, which of the following is the total ordering cost of inventory given an annual demand of 36,000 units, a cost per order of $80 and a holding cost per unit per year of $4? A. $849 B. $1,200 C. $1,889 D. $2,267 E. $2,400

Answer: E From equation 17.3, Q = 1,200 = Square root of (2 x 36,000 x 80/4). Number of orders per year = 36,000/1,200 = 30 x $80 = $2,400

Which of the following is the symbol used in the textbook for the cost of placing an order in the fixedorder quantity inventory model? A. C B. TC C. H D. Q E. S

Answer: E S = Setup cost or cost of placing an order

When material is ordered from a vendor, which of the following is not a reason for delays in the order arriving on time? A. Normal variation in shipping time B. A shortage of material at the vendor's plant causing backlogs C. An unexpected strike at the vendor's plant D. A lost order E. Redundant ordering systems

Answer: E When material is ordered from a vendor, delays can occur for a variety of reasons: a normal variation in shipping time, a shortage of material at the vendor's plant causing backlogs, an unexpected strike at the vendor's plant or at one of the shipping companies, a lost order, or a shipment of incorrect or defective material.

Which of the following statements is true about the Fixed-order quantity system? A) It does not have a reorder point but rather a target inventory. B) The system is completely determined by the two parameters, Q and R. C) It does not have an EOQ, since the quantity varies according to demand. D) The order interval is fixed not the order quantity. E) None of the above is true.

B) The system is completely determined by the two parameters, Q and R.

In the basic Q model, if the lead time doubles, the EOQ will: A) decrease by half B) double C) remain the same D) increase, but not double E) none of the above

C) remain the same

Which of the following is not a reason for carrying inventory? A) to maintain independence of operations B) to take advantage of economic purchase-order size C) to make the system less productive D) to meet variation in product demand E) to allow flexibility in production scheduling

C) to make the system less productive

If demand for an item is normally distributed we plan for demand to be twice the average demand and carry 2 standard deviations worth of safety stock inventory.

FALSE Companies using the probability approach generally set the probability of not stocking out at 95 percent. This means we would carry about 1.64 standard deviations of safety stock.

The standard fixed-time period model assumes that inventory is never counted but determined by EOQ measures.

FALSE Fixed-time period models generate order quantities that vary from period to period, depending on the usage rates. The standard fixed-time period models assume that inventory is counted only at the time specified for review

Safety stock is not necessary in any fixed-time period system.

FALSE Fixed-time period models generate order quantities that vary from period to period, depending on the usage rates. These generally require a higher level of safety stock than a fixed-order quantity system.

In inventory models, high holding costs tend to favor high inventory levels.

FALSE Holding (or carrying) costs. This broad category includes the costs for storage facilities, handling, insurance, pilferage, breakage, obsolescence, depreciation, taxes, and the opportunity cost of capital. Obviously, high holding costs tend to favor low inventory levels and frequent replenishment.

Dependent demand inventory levels are usually managed by calculations using calculus-driven, costminimizing models.

FALSE Independent demand, the need for any one item is a direct result of the need for some other item, usually a higher-level item of which it is part.

Price-break models deal with the fact that the selling price of an item generally increases as the order size increases.

FALSE Price-break models deal with the fact that, generally, the selling price of an item varies with the order size.

The costs associated with reduced inventory results in lower profits.

FALSE Savings from reduced inventory results in increased profit.

In a price break model of lot sizing the lowest cost quantity is always feasible.

FALSE Step 1. Sort the prices from lowest to highest and then, beginning with the lowest price, calculate the economic order quantity for each price level until a feasible economic order quantity is found. By feasible, we mean that the price is in the correct corresponding range. Step 2. If the first feasible economic order quantity is for the lowest price, this quantity is best and you are finished. Otherwise, calculate the total cost for the first feasible economic order quantity (you did these from lowest to highest price) and also calculate the total cost at each price break lower than the price associated with the first feasible economic order quantity. This is the lowest order quantity at which you can take advantage of the price break. The optimal Q is the one with the lowest cost.

The "sawtooth effect," named after turn-around artist Al "chainsaw" Dunlap, is the severe reduction of inventory and service levels that occurs when a firm has gone through a hostile takeover.

FALSE The "sawtooth effect" relating Q and R in Exhibit 17.5 shows that when the inventory position drops to point R, a reorder is placed.

The average cost of inventory in the United States is 20 to 25 percent of its value.

FALSE The average cost of inventory in the United States is 30 to 35 percent of its value.

Fixed-order quantity inventory models are "time triggered."

FALSE The basic distinction is that fixed-order quantity models are "event triggered" and fixed-time period models are "time triggered."

Fixed-time period inventory models are "event triggered."

FALSE The basic distinction is that fixed-order quantity models are "event triggered" and fixed-time period models are "time triggered."

One of the basic purposes of inventory analysis in manufacturing and stockkeeping services is to determine the level of quality to specify.

FALSE The basic purpose of inventory analysis in manufacturing and stockkeeping services is to specify (1) when items should be ordered and (2) how large the order should be.

The fixed-order quantity inventory model favors less expensive items because average inventory is lower.

FALSE The fixed-order quantity model favors more expensive items because average inventory is lower.

Fixed-order quantity systems assume a random depletion of inventory, with less than an immediate order when a reorder point is reached.

FALSE The fixed-order quantity system focuses on order quantities and reorder points. Procedurally, each time a unit is taken out of stock, the withdrawal is logged and the amount remaining in inventory is immediately compared to the reorder point. If it has dropped to this point, an order for Q items is placed. If it has not, the system remains in an idle state until the next withdrawal.

The fixed-time period inventory system has a smaller average inventory than the fixed-order quantity system because it must also protect against stockouts during the review period when inventory is checked.

FALSE The fixed-time period model has a larger average inventory because it must also protect against stockout during the review period, T; the fixed-order quantity model has no review period.

The optimal stocking decision in inventory management, when using marginal analysis, occurs at the point where the benefits derived from carrying the next unit are more than the costs for that unit.

FALSE The optimal stocking level, using marginal analysis, occurs at the point where the expected benefits derived from carrying the next unit are less than the expected costs for that unit.

One of the drivers of the direct-to-store (direct distribution) approach is the decrease in trucking industry regulation.

FALSE What accounts for the emergence of the direct-to-store model? Global sourcing and the upstream migration of value-added logistics services are certainly primary drivers.

Shortage costs are precise and easy to measure.

FALSE When the stock of an item is depleted, an order for that item must either wait until the stock is replenished or be canceled. There is a trade-off between carrying stock to satisfy demand and the costs resulting from stockout. This balance is sometimes difficult to obtain, because it may not be possible to estimate lost profits, the effects of lost customers, or lateness penalties.

In making any decision that affects the size of inventory, what are the four categories of cost that must be considered? 1. _________________________________ 2. _________________________________ 3. _________________________________ 4. _________________________________

In making any decision that affects inventory size, the following costs must be considered. 1. Holding (or carrying) costs. 2. Setup (or production change) costs. 3. Ordering costs. 4. Shortage costs.

Some inventory situations involve placing orders to cover only one demand period or to cover shortlived items at frequent intervals.

TRUE An easy example to think about is the classic single-period "newsperson" problem.

An inventory system is a set of policies and controls that monitors levels of inventory and determines what levels should be maintained, when stock should be replenished, and how large orders should be.

TRUE An inventory system is the set of policies and controls that monitor levels of inventory and determine what levels should be maintained, when stock should be replenished, and how large orders should be.

Cycle counting is a physical inventory-taking technique in which inventory is counted on a frequent basis rather than once or twice a year.

TRUE Cycle counting is a physical inventory-taking technique in which inventory is counted frequently rather than once or twice a year.

When stocked items are sold, the optimal inventory decision using marginal analysis is to stock that quantity where the probable profit from the sale or use of the last unit is equal to or greater than the probable losses if the last unit remains unsold.

TRUE Equation 17.1 states that we should continue to increase the size of the order so long as the probability of selling what we order is equal to or less than the ratio Cu/(Cu + Co).

Fixed-time period inventory models generate order quantities that vary from time period to time period, depending on the usage rate.

TRUE Fixed-time period models generate order quantities that vary from period to period, depending on the usage rates.

In inventory models, high holding costs tend to favor low inventory levels and frequent replenishment.

TRUE Holding (or carrying) costs. This broad category includes the costs for storage facilities, handling, insurance, pilferage, breakage, obsolescence, depreciation, taxes, and the opportunity cost of capital. Obviously, high holding costs tend to favor low inventory levels and frequent replenishment.

If the cost to change from producing one product to producing another were zero the lot size would be very small.

TRUE If there were no costs or loss of time in changing from one product to another, many small lots would be produced.

In the fixed-time period model it is necessary to determine the inventory currently on hand to calculate the size of the order to place with a vendor.

TRUE In a fixed-time period system, inventory is counted only at particular times, such as every week orevery month. Counting inventory and placing orders periodically is desirable in situations such as when vendors make routine visits to customers and take orders for their complete line of products, or when buyers want to combine orders to save transportation costs.

Inventory is defined as the stock of any item or resource used in an organization.

TRUE Inventory is the stock of any item or resource used in an organization.

The computation of a firm's inventory position is found by taking the inventory on hand and adding it to the on-order inventory, and then subtracting back-ordered inventory.

TRUE Inventory position is defined as the on-hand plus on-order minus backordered quantities.

One of the daily, delicate balancing acts that Logistics managers have to perform involves the trade-off between customer satisfaction and cost to serve.

TRUE Logistics managers have to perform a daily, delicate balancing act, balancing: • Transportation costs against fulfillment speed • Inventory costs against the cost of stock-outs • Customer satisfaction against cost to serve • New capabilities against profitability

One of the daily, delicate balancing acts that Logistics managers have to perform involves the trade-off between inventory costs and the cost of stock-outs.

TRUE Logistics managers have to perform a daily, delicate balancing act, balancing: • Transportation costs against fulfillment speed • Inventory costs against the cost of stock-outs • Customer satisfaction against cost to serve • New capabilities against profitability

One of the daily, delicate balancing acts that Logistics managers have to perform involves the trade-off between transportation costs and fulfillment speed.

TRUE Logistics managers have to perform a daily, delicate balancing act, balancing: • Transportation costs against fulfillment speed • Inventory costs against the cost of stock-outs • Customer satisfaction against cost to serve • New capabilities against profitability

Price-break models deal with the fact that the selling price of an item varies with the order size.

TRUE Price-break models deal with the fact that, generally, the selling price of an item varies with the order size.

Price-break models deal with discrete or step changes in price as order size changes rather than a per-unit change.

TRUE Price-break models deal with the fact that, generally, the selling price of an item varies with the order size. This is a discrete or step change rather than a per-unit change.

Safety stock can be defined as the amount of inventory carried in addition to the expected demand.

TRUE Safety stock can be defined as the amount of inventory carried in addition to the expected demand.

Savings from reduced inventory results in increased profit.

TRUE Savings from reduced inventory results in increased profit.

In a price break model of lot sizing, to find the lowest-cost order quantity, it is sometimes necessary to calculate the economic order quantity for each possible price and to check to see whether the lowest cost quantity is feasible.

TRUE Step 1. Sort the prices from lowest to highest and then, beginning with the lowest price, calculate the economic order quantity for each price level until a feasible economic order quantity is found. By feasible, we mean that the price is in the correct corresponding range. Step 2. If the first feasible economic order quantity is for the lowest price, this quantity is best and you are finished. Otherwise, calculate the total cost for the first feasible economic order quantity (you did these from lowest to highest price) and also calculate the total cost at each price break lower than the price associated with the first feasible economic order quantity. This is the lowest order quantity at which you can take advantage of the price break. The optimal Q is the one with the lowest cost.

In a price break model of lot sizing, to find the lowest-cost order quantity, it is sometimes necessary to calculate the economic order quantity for each possible price.

TRUE Step 1. Sort the prices from lowest to highest and then, beginning with the lowest price, calculate the economic order quantity for each price level until a feasible economic order quantity is found. By feasible, we mean that the price is in the correct corresponding range. Step 2. If the first feasible economic order quantity is for the lowest price, this quantity is best and you are finished. Otherwise, calculate the total cost for the first feasible economic order quantity (you did these from lowest to highest price) and also calculate the total cost at each price break lower than the price associated with the first feasible economic order quantity. This is the lowest order quantity at which you can take advantage of the price break. The optimal Q is the one with the lowest cost.

One of the basic purposes of inventory analysis in manufacturing and stockkeeping services is to determine how large the orders to vendors should be.

TRUE The basic purpose of inventory analysis in manufacturing and stockkeeping services is to specify (1) when items should be ordered and (2) how large the order should be.

One of the basic purposes of inventory analysis in manufacturing and stockkeeping services is to specify when items should be ordered.

TRUE The basic purpose of inventory analysis in manufacturing and stockkeeping services is to specify (1) when items should be ordered and (2) how large the order should be.

The fixed-order quantity inventory model is more appropriate for important items such as critical repair parts because there is closer monitoring and therefore quicker response to a potential stockout.

TRUE The fixed-order quantity model is more appropriate for important items such as critical repair parts because there is closer monitoring and therefore quicker response to potential stockout.

The fixed-order quantity inventory model requires more time to maintain because every addition or withdrawal is logged.

TRUE The fixed-order quantity model requires more time to maintain because every addition or withdrawal is logged.

Safety stock can be computed when using the fixed-order quantity inventory model by multiplying a "z" value representing the number of standard deviations to achieve a service level or probability by the standard deviation of periodic demand.

TRUE To determine the safety stock required over a time period, given a service level or probability of stocking out, determine the z-value of the desired probability of stock-outs and multiply that z-value by the standard deviation of demand over the time period.

One of the drivers of the direct-to-store (direct distribution) approach is the increase in global sourcing.

TRUE What accounts for the emergence of the direct-to-store model? Global sourcing and the upstream migration of value-added logistics services are certainly primary drivers.


Related study sets

"What am I?" Guess the answer to the tricky questions!

View Set

Cloud computing (Characteristics of Cloud Services from a Business Perspective)

View Set

Personal Finance Investing Review

View Set

Digestive System Questions part b

View Set

World Scholar's Cup: Special Area

View Set

Essentials to Nursing Exam- Nursing Skills Related to Vital Signs

View Set

Chapter 10: Energy Balance and Weight Control

View Set

Chapter 14 Multiple Choice Questions

View Set