Navigation

When the course deviation indicator (CDI) needle is centered during an omnireceiver check using a VOR test signal (VOT), the omnibearing selector (OBS) and the TO/FROM indicator should read

0 degrees FROM or 180 degrees TO, regardless of the pilot's position from the VOT.

(Refer to Figure 29, illustration 8.) The VOR receiver has the indications shown. What radial is the aircraft crossing?

030 degrees

(Refer to Figure 25.) On what course should the VOR receiver (OBS) be set in order to navigate direct from Majors Airport (area 1) to Quitman VORTAC (area 2)?

101 degrees

(Refer to Figure 21.) What is your approximate position on low altitude airway Victor 1, southwest of Norfolk (area 1), if the VOR receiver indicates you are on the 340° radial of Elizabeth City VOR (area 3)?

18 nautical miles from Norfolk VORTAC.

(Refer to Figure 24.) On what course should the VOR receiver (OBS) be set to navigate direct from Hampton Varnville Airport (area 1) to Savannah VORTAC (area 3)?

195 degrees

(Refer to Figure 21, area 3; and Figure 29.) The VOR is tuned to Elizabeth City VOR/DME, and the aircraft is positioned over Shawboro, a small town 3 NM west of Currituck County Regional (ONX). Which VOR indication is correct?

2

(Refer to Figure 22.) What course should be selected on the omnibearing selector (OBS) to make a direct flight from Mercer County Regional Airport (area 3) to the Minot VORTAC (area 1) with a TO indication?

359 degrees

How many Global Positioning System (GPS) satellites are required to yield a three dimensional position (latitude, longitude, and altitude) and time solution?

4

(Refer to Figure 27, areas 4 and 2; and Figure 29.) The VOR is tuned to Jamestown VOR, and the aircraft is positioned over Cooperstown Airport. Which VOR indication is correct?

6

(Refer to Figure 25, and Figure 29.) The VOR is tuned to Bonham VORTAC (area 3), and the aircraft is positioned over the town of Sulphur Springs (area 5). Which VOR indication is correct?

7

(Refer to Figure 26, area 5.) The VOR is tuned to the Dallas/Fort Worth VORTAC. The omnibearing selector (OBS) is set on 253°, with a TO indication, and a right course deviation indicator (CDI) deflection. What is the aircraft's position from the VORTAC?

East-northeast

What procedure is recommended when climbing or descending VFR on an airway?

Execute gentle banks, left and right for continuous visual scanning of the airspace

(Refer to Figure 25.) What is the approximate position of the aircraft if the VOR receivers indicate the 245? radial of Sulphur Springs VOR-DME (area 5) and the 140? radial of Bonham VORTAC (area 3)?

Glenmar Airport

(Refer to Figure 29, illustration 1.) The VOR receiver has the indications shown. What is the aircraft's position relative to the station?

South

(Refer to Figure 29, illustration 3.) The VOR receiver has the indications shown. What is the aircraft's position relative to the station?

Southeast

(Refer to Figure 24.) What is the approximate position of the aircraft if the VOR receivers indicate the 320° radial of Savannah VORTAC (area 3) and the 184° radial of Allendale VOR (area 1)?

Southeast of Guyton

(Refer to Figure 26, area 5.) The navigation facility at Dallas-Ft. Worth International (DFW) is a

VOR/DME

If receiver autonomous integrity monitoring (RAIM) capability is lost in flight,

the pilot has no assurance of the accuracy of the GPS position