NX BASIC DESIGN KNOWLEDGE CHECKS

Which extrude limit requires you to select a face? Until Extended Value Through All Until Next

Until extended

What is an advantage of using a Hole feature instead of an Extrude? A hole feature cannot be deleted A Hole feature can be easily edited to change the form You can only create one hole at a time A Hole feature cannot be dimensioned easily

a hole feature can easily be edited to change the form

On which layer are all new objects created? Information layer Visible Only layer Active layer Work layer

work layer

Which Synchronous Modeling command can be used to transform faces in a linear direction, angular direction, or from point to point? Relate Face Motion Face Move Face Transform Face

move face

Which of the following statements is true when using Resize Chamfer, on selected faces? Cannot be a construction face for another chamfer Must not be planar Can only be resized symmetrically Must have a constant width

must have constand width

In bottom-up assembly modeling what do you create and then later add to an assembly? Arrangements Patterns Reference sets Piece parts

piece parts

What drafting command allows the creation of a text annotation that would be placed in title block? Populate Title Block PMI Text Populate Text Dynamic Note

populate title block

By default, all components you add to the assembly have how many degrees of freedom? None 3 4 6

6

In the NX user interface, the availability and layout of commands are organized by what to support the different major workflows? Tool groups Applications Tool Bars Tool GalleriesRV: Layer

Applications

What part of the NX user interface is used to locate and activate a specific command that is associated with one or more words or phrases? RB: Resource Bar Search Function Command Finder On Context Help

Command Finder

What area of the NX user interface will prompt the user on what to do? Cue Line NX Title bar User Prompt Line Top Border bar

Cue Line

What is used to control whether objects are visible and selectable? Object Information Layer Settings Rendering Style Object Status

Layer settings

The following are common drafting dimension standards, except for: PMI- product & dimensioning infomration ANSI-American National Standards Institute ISO-International Standards Organization DIN

PMI

Which of the following are located on the Resource bar? Command Finder Selection Filter Snap Options Part Navigator

Part Navigator

When the cursor is over more than one object what tool can be used to cycle through the possible candidate objects? Alternate Solution QuickPick Candidate Filter Command Finder

Quick Pick

When creating an Offset - Datum CSYS what type of Reference CSYS must be used to establish associativity to an existing Datum Coordinate System? Selected CSYS System WCS Dynamic CSYS

Selected CSYS

To extrude a sketch curve until a point where the curve crosses another curve or edge, which of the following options would you use? Stop at Intersection Until Next Infer Curves Connected Curves

Stop at intersection

What do the Roles control? The background color of a part What application you are in The buttons displayed in the ribbon groups The permission of the part file

The buttons displayed in the ribbon groups

What type of operation is used to create a single solid body out of two or more existing solid bodies? Weld Merge Unite Connect

Unite

You create a threaded hole in a lug for a specific size fastener. The resulting Hole feature includes: A single feature The hole, threads, and the entry and exit chamfers Two features The hole and the threads Three separate features The hole, threads, and chamfers Four features The Hole, threads, and two chamfers

a single feature the hole, threads and the entry and exit chambers

Synchronous modeling commands work best on what types of faces? Analytical faces Trimmed b-surfaces X-form faces Facet faces

analytical faces

In Bottom-up modeling, you create component parts at the _________ level. Feature Assembly Role Resource

assembly level

This determines how NX loads the component parts into an assembly, such as loading components fully or partially. System options Assembly load options Selection options Modeling options

assembly load options

In an assembly where do you find the name of the reference set that is being displayed for a component? Part Navigator Active window tab Graphics window Assembly Navigator

assembly navigator

When selecting a feature in the Part Navigator what color does the text of its children features then become? Red Green Blue Black

blue

What type of models can synchronous modeling commands be used on? Both history based and non-parametric models No models Only history based models Only non-parametric models

both history based and non parametric models

Which of the following best describes an advantage of creating an edge blend feature instead of creating fillet curves inside a sketch? There are fewer features in the model Can be edited, suppressed, or deleted without affecting the sketch Reduces the size of the model and loads faster Allows for downstream synchronous modeling edits

can be edit suppressed or deleted without affecting the sketch

If you don't see the commands you want to use what is one way to display them? Change your role Use the Show and Hide command Press the Home key Use Full Screen display

change your role

How can you create a note with a leader? Click to place the note Click and drag while placing the note Middle click and drag while placing the note Right click and drag while placing the note

click and drag while placing the note

What is one way invoking the radial toolbar? Click and hold both right mouse button and the middle mouse button Press Ctrl on the keyboard then click the left mouse button Click and hold the right mouse button either in the background or on top of an object Mouse over the NX title bar then click the right mouse button

click and hold the right mouse button either in the background or on top of an object

You find a command with the Command Finder that is not currently displayed on the Ribbon bar. How can you start the command? Select the indicated role in the Command Finder Use the menu to access the command Add the command to the Ribbon bar first Click the command in Command Finder

click the command finder

Where can you look to get information about an assembly's constraints? The Part Navigator The reuse library The Constraint Navigator The assembly Constraint dialog

constraint navigator

How do you create an assembly using the Bottom-Up method? Create the parts in the same file as the assembly Create the parts separately and then add them to the assembly Create the parts separately and WAVE link them to the assembly Create the parts separately and then import them into the assembly

create the parts separately and the add them to the assembly

What type of feature is used to define a new Sketch on a non-planar face? Face Point Create Non-Planar Datum Plane

datum plane

What operation can be done on any node in the Assembly Navigator to quickly make it the Work Part? Shift+Click Ctrl+Click Double-click F12 Key

double click

What is the primary workflow of synchronous modeling? Import data Export data Edit non-parametric models Edit history based models

edit non parametric models

Which default Reference Sets are available if no additional reference sets have been defined? Entire Part Empty Lightweight All

entire part

Which one of these are not a type of hole you can create? Clearance holes Internal threads External threads Exit chamfers

externl threads

When you have a master model, where do you ideally create a drawing of the model geometry? In the same part as the model geometry In a separate part, with the model geometry added as a component of the drafting part In another sheet In another layout view

in a separate part with the model geometry added as a component of the drafting part

How do you reposition a drawing view? In the Part Navigator, right-click the view node, then choose Move In the drawing area, add dimensions between the drawing border and the view border In the drawing area, click and drag the view border to the desired location Delete the drawing view and re-create it to the desired location

in the drawing area click and drag the view border to the desired location

How can you tell which reference set is displayed? Look for the reference set name in the Part Navigator Look for the reference set in the graphics window Look for the reference set name in the Assembly Navigator

look for the reference set in the assembly navigator

To edit within the context of an assembly, you must: Make the part the work part Make the part the displayed part Select the part in the window menu Change the window to Active part

make the part the work part

You can model multiple bodies in the assembly part file and later push these solids into their own component part files by using the _______ command. New Component New Part Push out Create Body

new component

In the Part Navigator how can you list the parameters, expressions, and values of a feature without using the Show Dimensions command? Open the Details Group Open the Parameters Group Open the Dimensions Group Open the Expressions Group

open the details group

All family members of the Template part are _______. Read only Selectable Clones Independent

read only

Which Synchronous Modeling command can be used to change the radii of this feature regardless of the feature history? Relate Face Move Face Transform Blend Resize Blend

resize blend

The Roles Tab is located on the _____? Ribbon Bar Resource Bar Top Border Bar Que Line

resource bar

What command allows you to create a feature by rotating a section string around an axis through a specified angle? Spin Revolve Rotate Sweep

revolve

How do you create a projected view on your drawing? Right click the sheet node and choose Add Base View Use the New View Command Right-click a view border and choose View Alignment Right-click a view border and choose Add Projected View

right click a view border and choose add projected view

To create a datum plane at an angle to a face, what would you select? Select a face and a point Select a datum and a point Select a face and a second face Select a face and datum axis or straight edge

select a face and datum axis or straight edge

Which command displays the number of rotational and transitional degrees that a component can move in an assembly? Show Degrees of Freedom Move Component Drag Components Motion Detection

show degrees of freedom

Which of the following cannot be selected to create Edge Blend features? Part edges Faces Edges at the intersection of features Sketch curves

sketch curves

Which of the following does not give you information about the constraints in your assembly? The Assembly Navigator The graphics window The Add Component dialog The Constraint Navigator

the add component dialog

By default, what happens to the child features when their parent feature is deleted? The child features have an error The children become orphan features The child features are automatically deleted The children expressions will become non-associative

the child features are automatically deleted

What is the Work Layer? The selectable layer The layer where objects are placed when created The visible layer The layer containing the solid body of the part model

the layer where obects are placed when created

When selecting a feature in the Part Navigator, what do the colors of the text above and below the selected Feature mean? Related Expressions between the features The Parent- and Child relationships The Boolean Features Editable and Non-editable features

the parent and child relationships

Design in context of an assembly means that the assembly is the displayed part and the component you are editing is what? The Current Part The Work Part Fully Loaded Partially Loaded

the work part

In the Assembly Navigator, how can you tell which node is the "Work Part"? The "Work Part" node is Italicized and the symbol is blue The "Work Part" node is represented by bold font text and a yellow component symbol The "Work Part" node and Symbol are dehighlighted The work part is Red

the work part node is represented by a bold font text and a yellow component symbol

Why would you use a separate Thread command? The hole command does not create threaded holes It is the only way to create a left-handed thread To create external threads To create a threaded Hole-Series

to create external threads

Why would you want to deactivate the Timestamp Order option in the Part Navigator? To view solid bodies in the model To change the timestamp of the features To view unused curves To view features from previous sessions

to view solid bodies in the model

Synchronous modeling workflows can be utilized to modify models that consist of: Lightweight Body Translated data imported from another CAD systemNon-parametric geometryParametric NX geometry with model history NX Facet Body Curve Features

translated data imported from another cad system non parametric geometry parametric nx geomentry with model history

What type of chamfer cannot be created? Two Angle Symmetric Asymmetric Offset and Angle

two angle

Which of the following are Boolean operations? EmbossCutInterpolate ConnectTrimCombine MergeSplitSew UniteSubtractIntersect

unite subtract intersect

Which of the following best describes how you add a part from a part family template? Use a search criteria and select the desired part file from a list Select a row from a spreadsheet Enter a value for each of the driving expressions Select the family member ID number and press Enter

use a search criteria and select the desired part file from a list

Which options can be used if you want to temporarily make the datum planes invisible from the graphics display? Use Layer Settings Cut All Datum Planes Suppress See Thru

use layer settings

After using the Show Dimensions command on a sketch how do you erase the temporarily-displayed dimensions from the graphics window? Hit the ESC key Close the Feature Dimension Dialog Box Select the dimensions and hit the DEL key Use the Refresh command

use the refressh command

How can you temporarily remove all the Sketches and Datums from the graphics window display if all the geometry is on the same layer? Delete them from the Part Navigator Use the Feature Status command Use the Show and Hide command Turn off Sketches and Datums

use the show and hide command

How can you investigate the design intent of a sketch? Vary a dimension to see how the sketch changes Look in the Status line for Intent comments Review the automatically created dimensions Use the Design Intent Browser

vary a dimension to see how the sketch changes

You can create a chamfer feature or chamfer curves inside a sketch. What is a potential advantage of creating chamfers in a sketch? They can suppressed individually They will make the sketch easier to constrain It will be easier to find the chamfer in the part navigator Your model history will have fewer features

your model history will have fewer features