Operations Exam 2 Chapter 7

Ace your homework & exams now with Quizwiz!

29) Process A has fixed costs of $1000 and variable costs of $5 per unit. Process B has fixed costs of $500 and variable costs of $15 per unit. What is the crossover point between process A and process B? A) 50 units B) 200 units C) $2,500 D) $5,000 E) $9,500

A) 50 units

14) Which of the following products is likely to be assembled on a repetitive process line? A) automobiles B) custom personal computers C) custom cakes D) steel E) beer

A) automobiles

26) Which of the following phrases best describes process focus? A) low volume, high variety B) Finished goods are usually made to a forecast and stored. C) Operators are less broadly skilled. D) high fixed costs, low variable costs E) low inventory

A) low volume, high variety

21) Align Technology uses a ________ approach to produce clear plastic removable aligners. A) mass customization B) product focus C) process focus D) repetitive focus E) crossover

A) mass customization

16) Arnold Palmer Hospital uses which focus? A) process B) repetitive C) product D) mass customization E) A and D

A) process

20) Goods made to order are typical of ________ and ________ approaches while goods made to forecast are typical of ________ and ________ approaches. A) process, mass customization; repetitive, product B) product, mass customization; repetitive, process C) product, process; repetitive, mass customization D) repetitive, product; mass customization, process E) repetitive, process; mass customization, product

A) process, mass customization; repetitive, product

4) The typical full-service restaurant uses a product-focused process.

Answer: FALSE

5) Harley-Davidson, because it has so many possible combinations of products, utilizes the process strategy of mass customization.

Answer: FALSE

1) A firm's process strategy is its approach to transforming resources into goods and services.

Answer: TRUE

2) Intermittent processes are organized around processes.

Answer: TRUE

3) In process-focused facilities, utilization of facilities is low.

Answer: TRUE

6) The assembly line is a classic example of a repetitive process.

Answer: TRUE

7) The tool that calculates which process has the lowest cost at any specified production volume is a crossover chart.

Answer: TRUE

8) The term focused processes refers to the quest for increased efficiency, whether in goods or services, that results from specialization.

Answer: TRUE

27) Which of the following characteristics best describes repetitive focus? A) It uses sophisticated scheduling to accommodate custom orders. B) Its output is a standardized product produced from modules. C) Operators are broadly skilled. D) It is widely used for the manufacture of steel. E) low volume, high variety

B) Its output is a standardized product produced from modules.

24) Which of the following is FALSE regarding repetitive processes? A) They use modules. B) They allow easy switching from one product to the other. C) They are the classic assembly lines. D) They have more structure and less flexibility than a job shop layout. E) They include the assembly of basically all automobiles.

B) They allow easy switching from one product to the other.

13) Which one of the following products is most likely made in a job shop environment? A) rolls of newsprint B) paper forms C) television sets D) cigarettes E) canned vegetables

B) paper forms

18) Frito-Lay is to ________ focus as Harley Davidson is to ________ focus. A) process, repetitive B) product, repetitive C) repetitive, product D) process, product E) product, mass customization

B) product, repetitive

30) Process X has fixed costs of $10,000 and variable costs of $2.40 per unit. Process Y has fixed costs of $9,000 and variable costs of $2.25 per unit. Which of the following statements is TRUE? A) The crossover point is approximately 6667 units. B) It is impossible for one process to have both of its costs lower than those of another process. C) Process Y is cheaper than process X at all volumes. D) Process X should be selected for very large production volumes. E) Process X is more profitable than process Y and should be selected.

C) Process Y is cheaper than process X at all volumes.

32) Product focused processes: A) allow more customization, but are not very efficient. B) are desirable because resource needs increase slowly with the complexity of a process. C) are processes that are specialized for relatively few products or customer groups. D) apply only to service firms, not to manufacturers. E) are profitable because customers demand flexibility, not specialization.

C) are processes that are specialized for relatively few products or customer groups.

12) A product-focused process is commonly used to produce: A) high-volume, high-variety products. B) low-volume, high-variety products. C) high-volume, low-variety products. D) low-variety products at either high- or low-volume. E) high-volume products of either high- or low-variety.

C) high-volume, low-variety products.

15) An assembly line is an example of a: A) product-focused process. B) process-focused process. C) repetitive process. D) line process. E) specialized process.

C) repetitive process.

25) Which of the following phrases best describes product focus? A) low volume, high variety B) Finished goods are usually made to order. C) Processes are designed to perform a wide variety of activities. D) high fixed costs, low variable costs E) high inventory

D) high fixed costs, low variable costs

9) A job shop is an example of a(n): A) repetitive process. B) continuous process. C) line process. D) intermittent process. E) specialized process.

D) intermittent process.

17) One of the similarities between process focus and mass-customization is: A) the volume of outputs. B) the use of modules. C) many departments and many routings. D) the variety of outputs. E) All of the above are similarities.

D) the variety of outputs.

31) The crossover point is that production quantity where: A) variable costs of one process equal the variable costs of another process. B) fixed costs of a process are equal to its variable costs. C) total costs equal total revenues for a process. D) total costs for one process equal total costs for another process. E) the process no longer loses money.

D) total costs for one process equal total costs for another process.

23) Harley Davidson: A) utilizes job shops to make each of its modules. B) uses product focused manufacturing. C) uses a large number of modules to build a small number of different bikes. D) uses work cells to feed its assembly line. E) All of the above are true.

D) uses work cells to feed its assembly line.

11) Which of the following industries is most likely to have low equipment utilization? A) auto manufacturing B) commercial baking C) television manufacturing D) steel manufacturing E) restaurants

E) restaurants

10) Three of the four types of processes are: A) goods, services, and hybrids. B) manual, automated, and service. C) process focus, repetitive focus, and product focus. D) modular, continuous, and technological. E) input, transformation, and output.

C) process focus, repetitive focus, and product focus.

22) Which of the following companies use a mass customization approach? A) Dell B) Align Technology C) Frito-Lay D) Arnold Palmer hospital E) A and B

E) A and B

9) High fixed costs and low variable costs are typical of which approach? A) product B) process C) mass customization D) repetitive E) A and C

E) A and C

28) A quasi-custom product: A) gets its apparent customization from the combinations available from a small number of modules. B) is often the output of repetitive focus facilities. C) is a valid description of a fast food sandwich. D) only applies in services. E) All but D are true.

E) All but D are true.


Related study sets

Chemistry 2019 Final Review Questions

View Set

Core Concepts Anesthesia Board Questions

View Set

Anatomy and Physiology Practice Test

View Set

Accounting Fundamentals - Final Exam Study Questions

View Set

Chapter 1 / Matter, Measurement,​ and Problem Solving

View Set