Review Skill 1 Training or testing Mode

Apply the CONFIDENTIAL 1watermark to this document.

1. Click on the Design tab. 2. In the Page Background group, click the Watermark option. 3. Select CONFIDENTIAL1.

Mark this document as Final.

1. Click on the File tab. 2. In the Info group, then select Protect Document. 3. Choose Mark as Final. 4. If any popups show, click Ok.

Display continuous line numbers for this document.

1. Click on the Layout tab. 2. In the Page Setup group, click the Line Numbers option. 3. Select Continuous.

Remove the header on page two.

1. Move the cursor to page two, then click on the Insert tab. 2. In the Header & Footer group, click the Header option. 3. Select Remove Header.

Customize the Save options to embed fonts in the file. Only embed characters used in the document. (Note: Leave all other default settings unchanged.)

1. Click on File tab, click Options and select Save. 2. Under Preserve fidelity when sharing this document, select Embed fonts in the file and Embed only the characters used in the document. Leave all other default settings and click OK.

Beginning with Confidential Information, add Numbering to the remaining paragraphs in this document, not including the Signed by line. Use the following numbering format: 1) 2) 3).

1. Beginning with Confidential Information select all of the text down to, but not including the Signed by line 2. On the Home tab, in the Paragraphgroup, click the down arrow on the Numbering option and select the 1) 2) 3) format from the Numbering Library.

Insert the picture oranges.jpg located in the /GMetrixTemplates folder after the second paragraph on page two and apply the Artistic Effect Line Drawing.

1. Click after the second paragraph. Select the Insert tab, Illustrations Group and select Pictures. 2. Locate the Oranges.jpgpicture from the /GMetrixTemplates folder, and click Insert. 3. With the picture selected, click on the Picture Tools Formattab, Adjust Group, and select Artistic Effects. 4. Click on the Line Drawingoption at the top of the last column.

Add the pre-defined SAMPLE 2 watermark to the document.

1. Click on the Design tab, in the Page Background group, select Watermark and choose the SAMPLE 2 pre-defined watermark under the Disclaimer section.

Apply the Parchment Fill Effect to this document.

1. Click on the Design tab. 2. In the Page Background group, click the Page Color option, and select Fill Effects. 3. Go to the Texture tab, select the Parchment option and click OK.

Create a new document from the sample template, Business report (Median theme). On page one, enter FUSION TOMO as the Title Heading and Annual Report as the Subtitle Text.

1. Click on the File tab and select New. 2. Search Business report (Median theme) in the search for online templates Box, select the template. 3. Click the Create button. 4. Enter FUSION TOMO as the Title Heading and Annual Report as the Subtitle Text on page one of the document.

Create a PDF/XPS document from this document and publish the document to the /GMetrixTemplates folder as word05.pdf. Do not open the file after publishing.

1. Click on the File tab. 2. In the Export menu, Select Create PDF/XPS Document. 3. Navigate to the /GMetrixTemplates folder. 4. Make sure the Open the File after publishing option is unchecked, and Publish the file as word05.pdf

In the Proofing Options, remove the Mark grammar errors as you type option for this document.

1. Click on the File tab. 2. In the Options group, click proofing. 3. In the Word Options window that opens uncheck the Mark grammar errors as you type box and click OK.

Apply double line spacing to the entire document.

1. Click on the Home tab, then in the Editing group click Select and choose Select All. 2. In the Paragraph group, click the Line and Paragraph Spacing option and select Double.

Go to the bookmark named quote, and create a right indent of 1.0 inches (2.54cm).

1. Click on the Home tab. 2. In the Editing group, click the Find dropdown option. 3. Select Go To.... Choose Bookmark and enter quote. 4. Click Go To and Close the dialog. 5. Locate the quotation that begins with Start long... and ends with...template. Highlight this quote. Click on the Home tab. 6. In the Paragraph group, click the Dialog box launcher option. 7. Locate the Indentation section and in the Right: field input1.0" (2.54cm). Click OK.

Insert page numbering at the bottom of each page of this document. Use the Simple style: Plain Number 3.

1. Click on the Insert tab. 2. In the Header & Footer group, click the Page Number option. 3. Select Bottom of page and then click Plain Number 3.

At the end of the document insert a horizontal line shape with a width set at 100% relative to the margin.

1. Click on the Insert tab. 2. In the Illustrations group, click Shapes and choose the Line shape. 3. Click in the space just below the final line of text on this page and drag to the right to create the line. 4. Right click on the line and choose More Layout Options. 5. Click on the Size tab and then click Relative in the Width section. 6. Set the value to 100 and make sure Margin is selected. 7. Click OK.

Insert the Austin Header and enter Fusion Tomo Inc. as the document title.

1. Click on the Insert tab. 2. In the Header & Footer group, click the Header option. 3. Select Austin. 4. Replace the title with Fusion Tomo Inc.

Add a TABLE OF CONTENTS to the beginning of the document using the built-in Automatic Table 1.

1. Click on the References tab. 2. In the TABLE OF CONTENTS group, click the Table of Contents option. 3. Select Automatic Table 1 from the dropdown.

Check the spelling and grammar of text in the document. Fix all misspellings in the document. (quotatins and qotatin)

1. Click on the Review tab. 2. In the Proofing group, click the Spelling & Grammar option. (For Office 365, click the Check Document option, and then click the Spelling option on the Editor panel.) 3. Choose Change for each misspelling of the word quotation. (For Office 365, click "quotation" for each misspelling to change them.)

Apply the Print Layout view to this document.

1. Click on the View tab. 2. In the Views group, click the Print Layout option.

Apply the Outline View to this document and then delete the Business Developments paragraph. Leave Outline View open.

1. Click on the View tab. 2. In the Views group, click the Outline option. 3. Select the Business Developments paragraph by clicking on the round bullet to the left of heading and then press Delete on your keyboard, or Backspace.

Create a document using the Letter (Origin theme) template. Add the salutation To whom it may concern:

1. Click the File tab, then New. 2. Search Letter (Origin Theme) in the search for online templates Box, select the template. Then click create. 3. Select the content control item [Type the salutation], and enter To whom it may concern:

Without changing the filename, Save the open document as a PDF file in your \GMetrixTemplates folder, optimized for minimum size. Do not open after publishing. Note: Ensure that the document is named word01.pdf

1. Click the File tab. 2. In the Export section, select Create PDF/XPS Document. 3. Select the Minimum size radio button and uncheck the Open file after publishing check box.4. Click Publish.

Add the Motion Quote text box to the first page of this document and enter the text An apple a day keeps the doctor away.

1. Click the Insert tab, under the Text group click the Text Boxoption. 2. Scroll through the Built-in options and select Motion Quote. 3. Enter the text An apple a day keeps the doctor away.

Demote the last item in the bullet list by one level.

1. Select the last item in the list. 2. In the Home tab, locate the Paragraph group, click the Increase Indent button.

Sort the data in the new table by Tons of Apples in descending order.

1. Select the table on the first page and click on the Table Tools/Layout tab. 2. In the Data group, click the Sort option. 3. Select Tons of Apples from the Sort bydrop-down and the Descending option. Click OK.

Add FusionTomo and Blackbread as AutoCorrect First Letter exceptions.

1. In the File tab select Options. Select Proofing. 2. In the Word Options dialog window find and select AutoCorrect Options.... 3. In the AutoCorrect: dialog window click the Exceptions... button and select the First Letter tab. 4. Under Don't capitalize after, type FusionTomo. Click Add. 5. Under Don't capitalize after, type Blackbread. Click Add. 6. Click OK three times to return to the document.

Insert a hyperlink to www.fusiontomo.com on the text Fusion Tomo Incorporated in the first paragraph of this document.

1. In the first paragraph find and select the text Fusion Tomo Incorporated and click on the Insert tab. 2. In the Links group, click the Hyperlink option. 3. In the address field type www.fusiontomo.com. Click Ok.

Find the word Australia in this document and replace it with Canada.

1. On the Home tab, in the Editinggroup, click the Replace option. 2. In the Find what field type Australia and in the Replace withfield type Canada. 3. Select Replace All. 4. Click OK, then Close.

Change the position of the footer on this page to 0.4 (1 cm) from the bottom.

1. On the Insert tab, in the Header & Footer group, click on Footer and select Edit Footer. 2. On the Header & Footer Tools/Design tab in the Position group, set Footer from bottom to .4" (1 cm).

Add a footer to the document using the built-in style Whisp.

1. On the Insert tab, in the Header & Footer group, click on the Footer button and select the Whisp built-in footer.

Create a two column table from the list of countries on page one of this document. AutoFit the table to the contents and accept all other default settings.

1. On the first page select the two columns of data including the column headings "Country" and "Tons of Apples". 2. Go to the Insert tab and click the Table option. 3. Select Convert text to table. 4. In the dialog that opens, choose AutoFit to contentsand click OK.

Create a Continuous section that will contain only the yellow highlighted text and apply the Moderate margin settings to the yellow highlighted text.

1. Place the cursor at the beginning of the yellow highlighted text. 2. On the Layout tab, in the Page Setup group, click Breaks. 3. In the Section Breaks group, click Continuous. 4. Now place the cursor at the beginning of the line that starts with "In consideration..." after the yellow highlighted section and repeat steps 2 and 3. 5. Finally, place the cursor anywhere in the highlighted text and click Margins in the Page Setup group. 6. Select the Moderate margin setting.

Add a custom table of contents the top of this page. Use the Formal format and show 3levels.

1. Place the cursor at the top of the page and click on the References tab. 2. In the Table of Contents group, click the Table of Contents dropdown and select Custom table of contents. 3. Choose Formal from the Formats drop-down and set Show Levels to 3. 4. Click OK.

Insert a Page Break before the Market Analysis Summary section.

1. Place your cursor at the beginning of the Market Analysis Summary section. 2. On the Insert tab, in the Pages group, click the Page Break.

At the end of the document, insert the SmartArt Illustration named Basic Process and apply the style named Subtle Effect.

1. Place your cursor at the end of the document. 2. Click on the Insert tab go to the Illustrations group, click the SmartArt button. 3. In the Choose a SmartArt Graphic dialog window select Process from the left pane, then find and choose Basic Process, Select OK. 4. Ensure that the smart art is selected. From the SmartArt Tools/Design tab, in the SmartArt styles group, click on the Subtle Effect style. Note: You may need to deselect and then select the smart art again so that the design tab appears.

Apply the Arial font to the paragraph starting with Confidential Information.

1. Select the entire Confidential Informationparagraph. 2. On the Home tab, in the Font group, select the drop down for text. Find and select the Arial option.

Create a left indent of 1 inch (2.54 cm) for the Confidential Information paragraph.

1. Select the entire paragraph beginning with "Confidential Information". 2. On the Home tab, in the Paragraph group, click the Dialog box launcher. 3. Change Indentation Left to 1" (2.54 cm). Click Ok.

Apply the Emphasis style to paragraph below the heading 1.2 Mission.

1. Select the entire paragraph starting with The employees of... On the Home tab, in the Styles group, click on the down arrow to navigate through the predefined Styles. Select the Emphasis style.

Format only the yellow highlighted text to display as two equal columns with a line between.

1. Select the highlighted text. 2. On the Layout tab, in the Page Setup group, click the Columns option. 3. Select More columns. 4. From the Preset options select Two and click the Line between check box. 5. Click OK.

Select the last sentence of the first paragraph, beginning with For more information... and add a comment of Remove.

1. Select the last sentence of the first paragraph, beginning with For more information... 2. Click on the Review tab. In the Comments group, click the New Comment option. 3. Enter the word Remove.

Add 12pt of spacing before paragraph three on page 1.

1. Select the paragraph that begins with Quotations... on page 1. 2. Select the Home tab, Paragraph group, click the Line and Paragraph Spacing option.3. Select Add Space Before Paragraph.OR1. Select the paragraph that begins with Quotations... on page 1.2. Select the Home tab, Paragraph group, click the Paragraph dialog box launcher. 3. in the Indents and Spacing tab, locate the Spacing group, and enter12 pt in the Before: box.

Create a special hanging indent of 1 (2.54 cm) in page one paragraph three, starting with, Quotations that are longer than... and ending with ...with a colon:

1. Select the third paragraph on page 1, starting with, Quotations that are longer than... and ending with ...with a colon: 2. Click on the Home tab. 3. In the Paragraph group, click the dialog box launcher. 4. On the Indents and Spacing tab, locate the Indentation section. 5. Under the Special option, choose Hanging in the dropdown box. 6. Under the By option, choose 1"(2.54 cm) and click OK.

Apply a left tab stop to the yellow highlighted sections of this document. Set the stop at 1 (2.54 cm).

1. Select the yellow highlighted text and click on the Layout 2. In the Paragraph group, click the on the Paragraph Dialog Box Launcher. 3. Click the Tabs... button at the bottom of the dialog. 4. In the Tab stop position box type 1" (2.54 cm), ensure the Left Alignment option is selected and click the Set button. Click OK to accept all other settings.

Save the Text Box as a building block in the Text Boxes gallery with the name Signature.

1. With the text box selected, go to the Insert tab .2. In the Text group, click Quick Part sand Save Selection to Quick Part Gallery. 3. Type Signature in the name field and select Text Boxes from the Gallery drop-down ( If the text box is grayed out, you have not selected the Text Boxes). 4. Click OK. If you get a dialogue box that asks if you want to save, click Save.

Encrypt this document with the password starship.

1. From the File tab click on the Info group and select Protect Document. 2. Choose Encrypt with Password and enter starship as the password. Click OK and reenter the password, then click OK again.

Create a document from the Report designtemplate and Save the template as a Word Document (*.docx) named Sample in the GmetrixTemplates folder.

1. From the File tab, select New. 2. In the Search bar, type "Report design" and click the Search icon. 3. Double-click on the Report design template to open it. 4. Go back to the File tab, click Save then Browse and enter the File name as Sample. 5. Navigate to the GmetrixTemplatesfolder. 6. Save as type: Word Document (*.docx). 7. Click Save.

Apply the shape style Colored Outline - Blue, Accent 1 to the text box on page two of this document.

1. Go to page two and select the text box next to the Signed by text. 2. Click on the Format tab. 3. In the Shape Styles group, click the Colored Outline - Blue, Accent 1 option.

On page two of this document, insert a 3x4 table between the first and second paragraph. Set the Table Style to List Table 1 Light - Accent 3.

1. Go to page two; click between the first and second paragraph. Click on the Inserttab and in the Tables group, click the Table option. 2. Drag your mouse on the displayed grid until a 3x4 table is selected. 3. In the Table Tools > Design tab, go to the Table Styles group and select theList Table 1 Light - Accent 3style from the pre-defined options.

Add an endnote containing the text Me, 2010 after the quote on the first line of page 2.

1. Go to the end of the first line on page 2 and click on the References tab. 2. In the Footnotes group, click Insert Endnote and type Me, 2010.

Find the words two months in the first sentence of the Term paragraph and add a comment containing the text: Two years?.

1. Go to the first sentence in the Term paragraph and select the words two months.' 2. Click on the Review tab. 3. Click on New Comment in the Comments group and enter the text Two years?.

Change the page background color to Ice Blue, Accent 2 and add a page Box border (accept all default settings).

1. On the Design tab, in the Page Background group, select Page Color and choose Ice Blue, Accent 2 from the top row of pre-defined colors. 2. Finally, click on Page Borders and select the Box setting. Leave all other default settings and click OK.

Change the style of the bulleted list of objectives in section 1.1 from a solid circle to check marks.

1. Select the bulleted list of objectives. 2. On the Home tab, in the Paragraph group, click on the Bullets drop-down and select the check mark option.

Prevent a page break in the final paragraph of this document by Keeping the lines together.

1. Place your cursor in the General Provisionsparagraph towards the end of the document. 2. On the Layout tab, in the Paragraph group, click the Paragraph Dialog Box Launcher and then click the Line and Page Breaks tab. 3. Select the Keep lines together check box and click OK.

Add a caption to the Start-up chart on page two that reads Figure 1 Finances and position it below selected item.

1. Right-click on the Start-up chart on page two of the document and select the Insert Caption option. 2. Enter Figure 1 Finances for the caption and press Ok.

Delete all of section 4.3 (including the sub-section) and update the Table of Contents to reflect the changes.

1. Select all of section 4.3 at the end of the document and hit the delete key. 2. Click on the References tab. 3. In the Table of Contents group, click the Update Table option.

Add 12 pt spacing after paragraph four, starting with Start long quotatins on a new... and ending with ...this Microsoft Word Template.

1. Select paragraph 4, starting with Start long quotatins on a new... and ending with this Microsoft Word template. 2. Click on the Home tab. 3. In the Paragraph group, click the Line and Paragraph Spacing option.4. Select Add Space After Paragraph. OR 1. Select paragraph 4, starting with Start long quotatins on a new... and ending with this Microsoft Word template. 2. Select the Home tab, Paragraph group, click the Paragraph dialog box launcher. 3. in the Indents and Spacing tab, locate the Spacing group, and enter 12 pt in the After:box.

Change the brightness of the picture to 40% and the contrast of the picture to -40%

1. Select the Picture and click on the Picture Tools/Format tab. 2. In the Adjust group, click the Corrections and in the drop down find and click Brightness: +40% Contrast: -40%.