Tools

A ___________ is a test instrument used to measure two or more electrical quantities.

Multimeter

A ________ is a device used with powder actuated tools for the purpose of providing protection from flying pieces of concrete.

Spall guard

A combustable gas detector is a test instrument that is used to test for the presence of combustable gases such as methane, propane, and ethanol.

True

A _____ is a test instrument that measures the amount of current in an electrical circuit.

Ammeter

A ___________ wrench is a specialty hand tool use in close quarters to tighten water supply connections to the faucet and slip nuts on fixture traps.

Basin

A ________ is used to remove a burr to prepare a tube for joining and assembly.

Deburring tool

A __________ is a heating device that uses two concave carbon tips that make contact with a pipe fitting and heat the circumference of the pipe as solder is applied.

Electric soldering tool

A chain cutter is a cutting tool used to cut cast-iron soil pipe that consists of a chain with lugs and cutting wheels attached to a lever assembly with two long handles.

False

A power actuated tool is a tool that drives fasteners by means of an explosive charge.

False

A shielded coupling is a stainless steel clamp assembly that holds no hub cast-iron soil pipe ends or fittings together and is secured in position with 7/16" hex nut bands on the stainless steel clamp.

False

A tap is a pipe threading tool that cuts external threads on pipe.

False

A tube end dimpler is a manually operated cutter that cuts a curved notch and produces two dimples simultaneously on the branch tube.

False

Swaging is the process of shrinking a tube in order to form a socket.

False

__________ is a cold forming process in which a groove is pressed into the end of pipe or tubing to accept the housing of the grooved joint coupling.

Roll grooving

A ______ is a group of individual fibers or wires twisted spirally around and axis.

Rope

A _________ is a hand tool with lever and pulling chains that provides the leverage necessary to pull hub and spigot ends or fittings together when assembling a hub and spigot joint.

Soil pipe assembly tool

________ is a method for joining tube and fittings using capillary action through the heating of the metals and the filling of the space between the tube and fittings with a filler metal at temperatures above 840°F.

Soldering

A ________ bender is a tube bending tool for free-form bending of annealed tube or fixture supplied tubing from quarter inch to three-quarter inch in size.

Spring

_________ is the process of mechanically forming Tee fittings when a branch collar, or tee, is extruded from the wall of tubing in a continuous operation.

Tee pulling

A receding die is a die that is considerably less wide than the length of the required thread.

True

Rope should be stored on spools or rolled into coils.

True

Straight-cut pipe reamers have long tapered flutes that will not dig into pipe.

True

What cutting tool is used to make square cuts on tubing?

Tubing cutter

Web slings are fabricated in _________ standard configuration

VI

A _______ flaring tool is a flaring tool that forms a flare when a feed screw is turned, forcing a flare cone into the end of tubing.

Yoke-and-screw