Unit 5 Quiz Questions

When using the ELLIPSE command, the major axis ___________. a. should be horizontal b. should be vertical c. can be at any orientation d. should be the same length as the minor axis

c. can be at any orientation

The POINT, MEASURE, and DIVIDE commands can be activated from the __________ in the Ribbon. a. Draw panel b. Modify panel c. expanded Draw panel d. expanded Modify panel

c. expanded Draw panel

4) The SPLINE command can be started by entering the command name at the prompt, entering the alias "SPL" or by selecting the command from the __________. a. Application menu b. Draw panel in the Ribbon c. expanded Draw panel in the Ribbon d. Both "a" and "b" are correct

c. expanded Draw panel in the Ribbon

When using the ELLIPSE command's default options (Axis, End), you will be prompted to specify the __________ and then the other axis radius. a. major axis diameter b. major axis radius c. major or minor axis diameter d. major or minor axis radius

c. major or minor axis diameter

When using the RECTANG command's Dimensions option, you will specify the first corner, enter the length, enter the width, and then __________. a. press the ENTER key b. right-click and select Enter c. pick a point to locate the rectangle d. enter the quadrant number

c. pick a point to locate the rectangle

When you created a series of points with the POINT command, they appear as small dots. To make them easier to see, you should change the point __________. a. color b. size c. style d. style and then draw the points again

c. style

If you want to create a half of a circle in the clockwise direction, you can use the ARC command and set the Angle option to __________. a. 90 b. -90 c. 180 d. -180

d. -180

If the Point Style dialog box setting "Set Size Relative to Screen" is activated and you zoom in or out from a group of points, you should use the __________ command to resize the points. a. REDRAW b. REGEN c. RESIZE d. UPDATE

b. REGEN

Although not as popular as the "Center" or "Axis, End" methods, the ELLIPSE command's _________ option allows you to create an ellipse by specifying an angle. a. Angle b. Rotation c. Orientation d. Position

b. Rotation

To select a series of points created by the POINT command, you should activate the __________ running object snap. a. Center b. Node c. Point d. Quadrant

b. Node

If you want to create an arc by specifying the chord length (straight line distance from the start to the end point of an arc), you should use the ARC command's __________ option. a. Chord b. Length c. Direction d. Start

b. Length

If you want to create a circle by selecting two points that define the diameter, you should use the CIRCLE command's __________ option. a. 2Point b. 3Point c. Diameter d. TTR

a. 2Point

The alias for the ARC command is __________. a. A b. AR c. AK d. RK

a. A

If you are given the distance between the flats for a polygon, you should use the __________ option and when prompted for the radius, you should enter __________. a. Circumscribed, half the distance between the flats b. Inscribed, half the distance between the flats c. Circumscribed, the distance between the flats d. Inscribed, the distance between the flats

a. Circumscribed, half the distance between the flats

The __________ command, found in the Utilities panel of the Ribbon, activates the Point Style dialog box. a. DDPTYPE b. PSTYLE c. POINTSTYLE d. PTYPE

a. DDPTYPE

Rays have a(n) __________ while Xlines have a(n) __________. a. Endpoint, Midpoint b. Midpoint, Endpoint c. Quadrant, Center d. Center, Quadrant

a. Endpoint, Midpoint

The two methods for creating splines are the __________ method (spline passes through specified points) and the _________ method (spline shaped by an attraction to the points). a. Fit, CV b. CV, Fit c. Through, CV d. Through, toLerance

a. Fit, CV

Objects created with the POLYGON command are actually polylines; to change the width of the polyline segments you can use the __________ command. a. PEDIT b. WEIGHT c. WIDTH d. Polygons are not polyline objects

a. PEDIT

In general, you will probably be better served to activate the ARC command (because of the numerous option choices) from the __________. a. Ribbon's Draw panel b. Ribbon's Modify panel c. command line d. right-click menus

a. Ribbon's Draw panel

To create multiple points, you should start the POINT command from the __________. To halt the creation of points, you should press the __________ key on your keyboard. a. Ribbon, ESC b. Ribbon, DEL c. Command Line, ESC d. Application Menu, DEL

a. Ribbon, ESC

If you want to use the DONUT command to create solid dots (no hole in the donut), you should set the __________. a. inner diameter to 0 b. outer diameter to 0 c. hole size to 0 d. Hole option to None

a. inner diameter to 0

When using the CIRCLE command's TTR (Tangent, Tangent, Radius) option, you will __________. a. pick two tangent points and then enter the radius b. need to activate a running tangent osnap, pick the points and enter the radius c. enter the radius and then pick two tangent points d. pick three tangent points

a. pick two tangent points and then enter the radius

Arcs are typically dimensioned by giving their __________. a. radius b. diameter c. area d. circumference

a. radius

If you want to create an arc by specifying a start point, a second point anywhere along the arc, and then an end point, you should use the ARC command's __________ option. a. 2Point b. 3Point c. Start, Second, End d. Length

b. 3Point

Instead of selecting the CIRCLE command's "Tangent, Tangent, Tangent" button in the Ribbon, you can activate the __________ option and use a Tangent object snap to pick the points. a. 2Point b. 3Point c. Diameter d. TTR

b. 3Point

If you want to create a quarter of a circle, you can use the ARC command and set the Angle option to __________. a. 0 b. 90 c. 180 d. 270

b. 90

The alias for the ELLIPSE command is __________. a. E b. EL c. ELE d. E or EL

b. EL

The __________ option of the POLYGON command allows you to create a polygon by simply drawing one of the sides. a. Corner b. Edge c. Leg d. Side

b. Edge

Both the DIVIDE and MEASURE commands _________. a. break selected objects into segments b. create points c. erase alternate segments d. highlight alternate segments

b. create points

If you select from the Ribbon, the "Start, Center, End" options for the ARC command and pick three points from left to right along a horizontal line, the arc will be ___________. a. created above the horizontal line b. created below the horizontal line c. Either "a" or "b" is correct depending on the cursor location d. Neither "a" or "b" is correct - no such options

b. created below the horizontal line

Circles are typically dimensioned by giving their __________. a. radius b. diameter c. circumference d. area

b. diameter

When using the ELLIPSE command's Center option, you will be prompted to specify a center point and then will have to provide the __________. a. major axis diameter and minor axis radius b. major and minor axis radius c. major and minor axis diameter d. minor axis diameter and major axis radius

b. major and minor axis radius

2) In the SPLINE command, you can change the shape at the start of a spline with the __________ option and at the end of the spline with the __________ option. a. Start, End b. start Tangency, end Tangency c. Begin, Finish d. begin Tangency, finish Tangency

b. start Tangency, end Tangency

To create a hexagon shape with a distance of 4 inches between the points, you should start the POLYGON command, enter __________ as the number of sides and use the _________ option. a. 6, Circumscribed b. 8, Circumscribed c. 6, Inscribed d. 8, Inscribed

c. 6, Inscribed

The LINE and ARC commands both have a __________ option that allows you to start a line or arc from a previously created line or arc. a. LastPoint b. Previous c. Continue d. Start

c. Continue

If you want to create an arc by specifying the tangent direction for the start of an arc, you should use the ARC command's __________ option. a. Chord b. Length c. Direction d. Start

c. Direction

A good way to hide or remove points from the drawing screen is to __________. a. change the point style to "blank" b. use QSELECT to select them and then ERASE them c. place them on a layer that can be turned off or frozen d. Any of the above

d. Any of the above

If you want to create a two inch diameter circle using the CIRCLE command you should ___________. a. use the Diameter option and enter 2 b. enter a radius of 1 c. use the 2Point option and pick two point 2 inches apart d. Any of the above

d. Any of the above

The DIVIDE and MEASURE commands can be used on __________. a. Lines b. Curves (Circles and Arcs) c. Polylines d. Any of the above

d. Any of the above

The POLYGON command creates regular polygons, such as __________. a. squares b. hexagons c. octagons d. Any of the above

d. Any of the above

To create multiple donuts, you should start the DONUT command from the __________. To halt the creation of donuts, you should __________. a. Ribbon, right-click b. Command line, right-click c. Command Line, press the ENTER key d. Any of the above

d. Any of the above

When creating a rectangle using the RECTANG command, you can specify the first corner by picking a point or entering a coordinate and the second by __________. a. picking a point or entering a relative coordinate b. activating the Dimensions option c. activating the Area option d. Any of the above

d. Any of the above

When using the CIRCLE command's TTR (Tangent, Tangent, Radius) option and select two existing circles, the circle you create will __________. a. enclose the existing circles b. exclude the existing circles c. enclose one existing circle and exclude the other d. Any of the above

d. Any of the above

When using the CIRCLE command's TTR (Tangent, Tangent, Radius) option, the circle you create will be __________. a. tangent to two existing circles b. tangent to two existing lines c. tangent to a line and circle d. Any of the above

d. Any of the above

In the __________ command you are prompted to __________. a. DIVIDE, Enter the number of segments b. MEASURE, Specify length of segment c. DIVIDE, Specify length of segment d. Both "a" and "b" are correct

d. Both "a" and "b" are correct

You can use the XLINE command's __________ option to create a miter line for an orthographic view drawing, a. Ang b. Bisect c. Miter d. Both "a" and "b" are correct

d. Both "a" and "b" are correct

If you want to create an elliptical arc, you can use the ELLIPSE __________. a. command's Arc option b. command and then trim or break the ellipse c. AutoCAD cannot create an elliptical arc d. Both answers "a" and "b" are correct

d. Both answers "a" and "b" are correct

While using the RECTANG command's Area option, the rectangle size will be determined based on the area and the __________ you provide. a. Length dimension b. Width dimension c. Perimeter dimension d. Either "a" or "b" is correct

d. Either "a" or "b" is correct

When using the __________ command on a line object, you should be sure to select the line on the correct end. a. DDPTYPE b. POINT c. DIVIDE d. MEASURE

d. MEASURE

Polyline objects can be created with the following commands: __________. a. PLINE and RECTANG b. PLINE, RECTANG, and POLYGON c. PLINE, RECTANG, POLYGON, and DONUT d. PLINE, RECTANG, POLYGON, DONUT, and PEDIT

d. PLINE, RECTANG, POLYGON, DONUT, and PEDIT

If you trim the end of an Xline you have a __________ and if you trim the end of a Ray you have a __________. a. Xline (does not change), Ray (does not change) b. Ray, Xline c. Line, Xline d. Ray, Line

d. Ray, Line

While using the RECTANG command, you can change the angle of the created rectangle by using the __________ option. a. Angle b. Change c. Edit d. Rotation

d. Rotation

5) The SPLINE command has two icons in the Ribbon, they are __________. a. Through and CV b. Method and toLerance c. start Tangency and end Tangency d. Spline Fit and Spline CV

d. Spline Fit and Spline CV

You can use the XLINE command's __________ option to transfer width dimension from the primary view to the one above it. a. Align b. Bisect c. Hor d. Ver

d. Ver

Because the rectangle created by the RECTANG command is a polyline object, the following options are available:__________. a. Thickness, Round, and Corner b. Width, Fillet, and Corner c. Width, Round, and Chamfer d. Width, Fillet, and Chamfer

d. Width, Fillet, and Chamfer

The _________ command is often referred to as the "Construction Line" command. a. CONSTRUCT b. OFFSET c. RAY d. XLINE

d. XLINE

The __________ command has the following options: Hor, Ver, Ang, Bisect, and Offset. a. CONSTRUCT b. PEDIT c. RAY d. XLINE

d. XLINE

When using the CIRCLE command's 3Point option, you select the points __________. a. in the counter-clockwise direction b. in the clockwise direction c. starting with the center point d. along the circumference in any order

d. along the circumference in any order

3) The SPLINE command's __________ option specifies the distance a spline is allowed to deviate from the specified points; if set to "0" the spline will pass through the points. a. Distance b. Method c. Fit d. toLerance

d. toLerance