Advanced Manufacturing by ryderspider
The most common chemical identifiers are the chemical name, the UN ID, and the __________ number.
CAS ID
A hard hat classified as __________ provides electrical protection up to 2200 volts.
Class G
The following color code is used for which system; blue = health, red = fire, orange/yellow = reactivity, and white = information.
NPCA and NFPA
The PEL (Permissible Exposure Limit) for exposure to hazardous substances are set by __________.
OSHA
Safe handling procedures of chemicals are found in the __________.
SDS
The __________ provides information about proper handling, storage, PPE, and disposal of each chemical. - OSHA
SDS
The regulation that requires manufacturers to document and report information on the types of chemicals they use, store, release into the environment, or dispose of is known as EPCRA. Is this statement TRUE or FALSE?
True
Hazardous materials being shipped internationally are given what identification code for labelling?
UN (united nations)
A group of employees and managers who work together to maintain a safe work environment is known as which of the following?
a safety committee
On a half-mask respirator, a worker should cover the cartridges with his/her hands when __________.
checking the mask for leaks
Inhalation is the most common way for a(n) __________ to enter the body.
chemical
Health hazards can cause acute (short-term) or __________ (long-term) health problems.
chronic
Which of the following items marked the advent of the third industrial revolution?
computers
The process of identifying potential hazards in the workplace is known as a __________.
hazard assessment
OSHA requires that a copy of the __________ be readily available to all employees.
hazard communication program and SDS sheets
The emergency response team should be notified immediately if you observe a(n) __________.
hazardous material spill
When transporting hazardous materials, the shipper should reference the __________ for packaging, labeling, and paperwork requirements.
hazardous materials table
Which hazards are caused by materials that cause infections or slowly damage the body over time?
health
A worker should not unload a truck if __________.
they do not understand a placard on the truck
What type of respirator covers only the nose and mouth?
half-mask respirator
Working in an atmosphere with less than __________ can cause disorientation.
19.5% oxygen
What kind of technology mostly requires the use of a mobile phone?
5G communication
Which of the following refresher training courses is required annually?
8-hour HAZMAT
An employee was performing maintenance on equipment and finished that maintenance before they left for the day. The next shift found out they left their lockout lock on the equipment. You have verified the employee is not at work. What should be done to remove the lock?
A supervisor who has made every attempt to contact the employee to tell them their lockout is being removed then and informs them that the lock was removed upon their return to work.
What laboratory is responsible for testing the quality and durability of industrial glove PPE?
ASTM
How should inspection records be stored?
According to federal, state, local, and company regulations
The __________ provides guidelines for disposal of chemicals without dumping or discarding.
EPA
An employee needs to perform a lockout/tagout, but there is no remaining space on the hasp. What should be done to ensure the lockout/tagout procedure is followed?
a new lockout hasp should be added with the employee's designated lock to continue the procedure.
How should a new employee's participation in a safety orientation be documented?
according to company policy
A system that combines advanced technologies to make customized products for less money and high quality is called __________ manufacturing.
advanced
EPA regulations are designed to protect you from which of the following hazards?
airborne and waterborne contaminants
Which of the following statements about Safety Data Sheets are true?
all chemicals stored in inventory must have an SDS
Safety should be the number one priority at all times for __________.
all employees
What would an HMIS label use to indicate chemicals that pose chronic health risks?
asterisk
Diluted __________ can be used to neutralize most blood pathogens.
bleach
When welding, watching the arc with unprotected eyes can cause __________.
blindness
Which classification of hardhat is designed for use in areas of low clearance and provides minimal impact resistance or protection from electrical hazards?
bump caps
When two or more people need to service a machine, who is responsible for performing the lockout/tagout?
each person supplies their own lock to the hasp
The Environmental Protection Agency (EPA) requires documentation of inspections for __________.
emissions released in the air
Which industry sector uses IIoT to remotely control energy-consuming devices?
energy and power
Data results are required to be made available to employees who participate in
environmental tests
What standard introduced in the early 1980s established a method to physically connect machines from different manufacturers enabling them to communicate to one another?
ethernet
A consensus is a decision-making process whereby the team members all accept the same decision __________.
even though it may not be their first choice
Standard operating procedures (SOPs) are detailed documents that __________.
explain each step in a work process
OSHA provides regulations to limit the __________.
exposure to noise
Practicing unsafe behavior does not impact anyone besides you. Is this statement TRUE or FALSE?
false
Which of the following PPE items use synthetic material?
firefighter's suit, chemical gloves, and sanitation aprons
__________ is a system that rotates chemical stock to ensure they are used within their shelf life.
first in, first out
A red and white DOT placard indicates the material is a(n) __________.
flammable solid
Which of the following is a segment of manufacturing?
food and beverage, industrial, and process
What protection does a metatarsal guard provide?
foot protection
The three Fs of product design are form, fit and __________.
function
Which of the following PPE are you required to wear when working around flying debris like sparks or wood chips?
goggles and face shield
A machine __________ is a device that is designed to keep the operator clear of dangerous machine parts.
guard
What type of safety barrier prevents an operator's arms from entering the machine during operation?
holdback restraint
In terms of safety, everyone is responsible for reporting __________.
improperly guarded equipment
Which of the following is NOT a benefit of wearing PPE designed for your hands?
increased hand perspiration
Nanotechnologies, artificial intelligence, and robots are examples of what kind of technology?
industry 4.0
A job safety analysis is the best method of __________.
integrating safety into the way a job is done
Many products cannot be disposed of using a trash compactor before sending to a landfill. These include: fluorescent light bulbs, spray cans containing all or some of product, and __________.
liquid dyes
Which of the following are NOT financial impacts of on-the-job injuries for your employer?
lost wages
Which component of IIoT allows networked devices to exchange information?
machine-to-machine communication
__________ is the process of converting raw materials into finished goods.
manufacturing
Which of the following is an IIoT application?
monitoring in-plant processes
If an operator knows a safety problem exists with a machine, the operator should
notify a supervisor immediately
The mission of OSHA, or the __________, is to ensure safe and healthful working conditions for working men and women.
occupational safety and health administration
Which manufacturing logistics application of IIoT includes the resources to move a product or service from the supplier to the customer?
supply chain management
__________ are chemicals that fuel the combustion of other materials.
oxidizers
Which of the following tests can be performed to determine if the company's safety measures need improvement?
performing routine safety inspections
A mechanical interlock __________ prevent(s) a machine's operation when the guard is out of place.
physically
Which of the following is evaluated during a hazard assessment?
potential hazards
Which type of ear protection is molded to fit your unique ear?
pre-formed earplug
Which IIoT application monitors equipment during normal operation to prevent failures to the equipment?
predictive maintenance
When performing a hazard analysis, a list of hazards associated with a job is identified as well as the __________ to avoid them.
procedures
A welding helmet should be worn with __________ for additional eye protection.
safety glasses with face shields
The __________ is responsible for promoting safety throughout the workplace, ensuring policies are followed, training is taking place, and policies are up-to-date.
safety officer
The __________ should collect and evaluate suggestions for changing or improving safety training material and content.
safety officer
Which of the following PPE could prevent a puncture wound to your foot?
safety shoes
The major responsibility of the president or general manager is to __________.
set the vision and create a plan
The __________ is used to identify the items being loaded for shipment as well as the potential hazards associated with those items.
shipping manifest
Industry 4.0 has led to the creation of what kind of facilities?
smart factories
People working together discussing issues and making decisions are key elements of a __________.
successful work group
The __________ of a high performance team has equal decision making authority with other team members.
team leader
The QA department ensures that the products meet requirements as defined by whom?
the customers
When assessing hazards, which of the following safety aspects are considered by an employer setting Hazmat policies?
the effectiveness of training workers
Before removing a machine's guards, make sure that __________.
the machine has been locked and tagged out
The person who performs a step in a production process is the internal customer to the person who performs __________.
the previous step in the process
Employers should provide training in the use of personal protective equipment __________.
to reduce the employee's risk of hazardous materials exposure
Until corrective action is taken, safety concerns should be __________.
tracked and reported
In manufacturing, changes to processes, equipment and people are the largest drivers of __________.
training
An injury is defined as physical harm to the body that happens as a result of exposure to some form of energy that exceeds the body's tolerance. Is this statement TRUE or FALSE?
true
Eye and face protection must protect you from the specific hazards that you may encounter in your workplace. Is this statement TRUE or FALSE?
true
PPE can protect you from injuries caused by equipment or dangerous chemicals. Is this statement TRUE or FALSE?
true
Smoke inhalation can cause serious lung tissue damage. Is this statement TRUE or FALSE?
true
The purpose of PPE is to protect you from injury by creating a barrier against workplace hazards. Is this statement TRUE or FALSE?
true
The National Safety Council defines an accident as an occurrence in a sequence of events that produces __________.
unintended injury, ill health, or property damage
What rule should be followed to safely store hazardous chemicals?
use original storage containers, store material based on compatibility, and identify storage areas with signs
Safety glasses should be worn when __________.
using a drill press
Gloves and safety glasses are necessary when working with __________.
with sharp or rough sheet metal
Which of the following best describes OSHA's Hazardous Communication Standard?
workers have a right to know the risks of hazardous materials they work with
