Chapter 4 Power Tools

The adjustable tool rest on a grinder should be positioned ______ inch from the wheel.

1/8"

Saws with fine blades that are excellent for delicate and intricate cutting are called _____.

Saber Saws.

Keep a drills air vents clean with a _____.

Small Brush

Before you start drilling make sure that the drill bit is tight in the _____.

Chuck

Drill bits are held in place by _____.

Chucks

A power miter saw contains a miter box and _____.

Circular Saw

If a pneumatic nailer is not firing properly, before you attempt repairs you must _____.

Disconnect The Air Hose

Before changing any parts such as bits blades or disc on any tool you must _____.

Disconnect The Power Tool

When using a drill, proper ground fault protection will prevent _____.

Electrical Shock

A pneumatic drill is used when there is no _____.

Electricity

To prevent electrical shock, power tools should only be operated with the proper _____.

GFCI

Never use a circular saw that does not have an upper blade guard because the _____.

Guard Protects You From Touching The Blade

The angle grinder is used to grind _____.

Hard Heavy Materials

A porta-power is and example of a _____.

Hydraulic Tool

When using an air wrench, _____.

Keep Your Body Stance Balance

Some manufactures suggest that each time you use a pneumatic nailer the air inlet _____.

Needs A Few Drops Of Oil.

Before you plug any saw into a power source, make sure the _____.

Power Switch Is In The Off Position

The first step when using a pneumatically power nailer for the first time is to _____.

Read The Manufactures Instructions

On power tools you should never engage the _____.

Trigger Lock

An example of an AC power source is a _____.

Wall Receptacle