Chapter 4 Power Tools
The adjustable tool rest on a grinder should be positioned ______ inch from the wheel.
1/8"
Saws with fine blades that are excellent for delicate and intricate cutting are called _____.
Saber Saws.
Keep a drills air vents clean with a _____.
Small Brush
Before you start drilling make sure that the drill bit is tight in the _____.
Chuck
Drill bits are held in place by _____.
Chucks
A power miter saw contains a miter box and _____.
Circular Saw
If a pneumatic nailer is not firing properly, before you attempt repairs you must _____.
Disconnect The Air Hose
Before changing any parts such as bits blades or disc on any tool you must _____.
Disconnect The Power Tool
When using a drill, proper ground fault protection will prevent _____.
Electrical Shock
A pneumatic drill is used when there is no _____.
Electricity
To prevent electrical shock, power tools should only be operated with the proper _____.
GFCI
Never use a circular saw that does not have an upper blade guard because the _____.
Guard Protects You From Touching The Blade
The angle grinder is used to grind _____.
Hard Heavy Materials
A porta-power is and example of a _____.
Hydraulic Tool
When using an air wrench, _____.
Keep Your Body Stance Balance
Some manufactures suggest that each time you use a pneumatic nailer the air inlet _____.
Needs A Few Drops Of Oil.
Before you plug any saw into a power source, make sure the _____.
Power Switch Is In The Off Position
The first step when using a pneumatically power nailer for the first time is to _____.
Read The Manufactures Instructions
On power tools you should never engage the _____.
Trigger Lock
An example of an AC power source is a _____.
Wall Receptacle
