ecee midterm reviewer
Duplex arrangement
A cordless telephone using separate frequencies for transmission in base and portable units is known as. Duplex arrangement Half duplex arrangement Either (a) or (b) Neither (a) nor (b)
Digital Subscriber Line
DSL
Wired phone access and ISP
DSL telcos provides which of the following services? Wired phone access ISP Wired phone access and ISP Network routing and ISP
distribution switch unit
DXU
Data link layer
The physical layer translates logical communication requests from the __ into hardware specific operations. Data link layer Network layer Transport layer Application layer
Router
Which of the following devices forwards packets between networks by processing the routing information included in the packet? Firewall Bridge Hub Router
combining and distribution unit
CDU
Cyclic redundancy check
CRC stands for __. Cyclic redundancy check Code repeat check Code redundancy check Cyclic repeat check
The gauge of the twisted-pair line and degree of electrical interference
Which of the following factors affect transmission rate in DSL? The gauge of the twisted-pair line Degree of electrical interference Shadow fading The gauge of the twisted-pair line and degree of electrical interference
Personal area network
Which of the following is an example of bluetooth? Wide area network Virtual private network Local area network Personal area network
Modem
Which of the following is used for modulation and demodulation? Modem Protocols Gateway Multiplexer None of the above
Layer 7 protocols
Which of the following layer protocols are responsible for user and the application program support such as passwords, resource sharing, file transfer, and network management? Layer 7 protocols Layer 6 protocols Layer 5 protocols Layer 4 protocols None of the above
Error control
Which one of the following is not a function of network layer? Routing Inter networking Congestion control Error control
Optical fiber
Which transmission media provides the highest transmission speed in a network? Coaxial cable Twisted pair cable Optical fiber Electrical cable
Dynamic routing
is known as adaptive routing which changes routing table according to change in topology
Static Routing
is known as non-adaptive routing which doesn't change routing table unless network administrator changes them manually
transceiver unit
TRU
Consists of software being run on the computer connected to the network
The application layer at a network: Establishes, maintains, and terminates virtual circuits Defines the user's part into the network Consists of software being run on the computer connected to the network All of the above None of the above
Network layer
The data link layer takes the packets from __ and encapsulates them into frames for transmission. Network layer Physical layer Transport layer Application layer
Packets
The network layer is concerned with __. Bits Frames Packets Bytes
Internet protocol
The network layer protocol for internet is Ethernet Internet protocol Hypertext transfer protocol File transfer protocol
Bit-by-bit delivery
The physical layer is concerned with __. Bit-by-bit delivery Process to process delivery Application to application delivery Part to part delivery
All of the mentioned
The physical layer provides __. Mechanical specifications of electrical connectors and cables Electrical specification of transmission line signal level Specification for IR over optical fiber All of the mentioned
battery fuse unit
BFU
base transceiver station
BTS
Digital modulation
Bits can be sent over guided and unguided media as analog signal by __. Digital modulation Amplitude modulation Frequency modulation Phase modulation
Upper layers: -network processes to applications -data representation -inter host communication Transport layer: -end-to-end connection -charge of reliable/unreliable transport of data Network layer: -data delivery -provides connectivity & path selection between 2 host systems Data link layer: -access to media -create, transmit, & receive packets Physical layer: -binary transmission -defines electrical, mechanical, procedural, & functional specifications for activating, maintaining, and deactivating the physical link
Define each layers of OSI model
energy control unit
ECU
Enhanced Data rates for GSM Evolution
EDGE
equipment identity register
EIR
Network layer
IPSec is designed to provide security at the __. Transport layer Network layer Application layer Session layer
Wireless networks
Extensible authentication protocol is authentication framework frequently used in __. Wired personal area network Wireless networks Wired local area network Wired metropolitan area network
gateway mobile switching center
GMSC
General Packet Radio Service
GPRS
Global System for Mobile Communications
GSM
home location register
HLR
All of the mentioned
Header of a frame generally contains __. Synchronization bytes Addresses Frame identifier All of the mentioned
A, B, C
Home internet access is provided by __. DSL Cable Cable A, B, C
7
How many layers are there in the ISO OSI reference model? 7 5 4 3
Long-Term Evolution
LTE
Media Access Control
MAC
Multiple Input, Multiple Output
MIMO
mobile station
MS
mobile switching center
MSC
Open Systems Interconnection
OSI
operation subsystem; maintenance
OSS
Optical Time Domain Reflectometer
OTDR
Plesiochronous Digital Hierarchy
PDH
public land mobile network
PLMN
power supply unit
PSU
Topology
Physical or logical arrangement of network is __. Topology Routing Networking Control
Synchronous Digital Hierarchy
SDH
subscriber identity module
SIM
trans-coding rate & adaptation unit
TRAU
Satellite access
StarBand/Starlink provides __. FTTH internet access Cable access Telephone access Satellite access
Process to process communication
Transport layer protocols deals with __. Application to application communication Process to process communication Mode to mode communication Man to man communication
User Datagram Protocol
UDP
Unshielded Twisted Pair
UTP
Overlay network
Which of the following computer network is built on the top of another network? Overlay network Prime network Prior network Chief network
Virtual Local Area Network
VLAN
visitor location register
VLR
Wideband Code Division Multiple Access
WCDMA
Wi-fi
WPA2 is used for security in __. Ethernet Bluetooth Wi-fi Email
Application Presentation Session Transport Network Data link Physical
What are the 7 layers of the OSI model?
All of the mentioned
What are the nodes in a computer network? The computer that routes the data The computer that terminates the data The computer that originates the data All of the mentioned
A collection of interconnected computers and devices that can communicate and share resources
What is a computer network? A device used to display information on a computer screen A collection of interconnected computers and devices that can communicate and share resources A type of software used to create documents and presentations The physical casing that protects a computer's internal components
A network of interconnected local area networks
What is internet? A network of interconnected local area networks A collection of unrelated computers Interconnection of wide area networks A single network
Open system interconnection
What is the full form of OSI? Optical service implementation Open service internet Open system interconnection Operating system interface
Simplex
What type of transmission is involved in communication between a computer and a keyboard? Half duplex Full duplex Simplex Automatic
Distributed system
When a collection of various computers appears as a single coherent system to its clients, what is this called? Mail system Networking system Computer network Distributed system
All of the mentioned
Which component is included in IP security? Authentication header (AH) Encapsulating security payload (ESP) Internet key exchange (IKE) All of the mentioned
Application
Which layer of OSI determines the interface of the system with the user? Network Application Data-link Session None of the above
All of the mentioned
Which of the following are gigabit ethernets? 1000 base-LX 1000 base-CX 1000 base-SX All of the mentioned
TCP and UDP
Which of the following are transport layer protocols used in networking? TCP and FTP UDP and HTTP TCP and UDP HTTP and FTP
All of the mentioned
Wireless transmission of signals can be done via __. Radio waves Microwaves Infrared All of the mentioned
router: -to connect various networks simultaneously -works in network layer -used by lan & man -data is sent in form of packets -less collision taking place switch: -connect various devices simultaneously -works in data link layer -used by only lan -data is sent in form of frame -no collision taking place
differentiate router and switch
Subscriber identity module (SIM)
electronic microchip for storing information
Mobile equipment
terminal used by user