Module 7 Quiz - Windows Server

When creating a RAID volume using Server Manager, each storage device is automatically converted to a dynamic disk. A) True B) False

B) False

You can only run the chkdsk command on NTFS and ReFS filesystems. A) True B) False

B) False

When configuring the Storage Spaces component of Windows Server 2019 using Server Manager, which of the following statements is true? (Choose all that apply.) A) The primordial storage pool contains all storage devices on a system B) RAID volumes are created on a virtual disk that utilizes space in a storage pool comprised of storage devices C) Virtual disks implement a level of RAID and can use thin or thick provisioning D) The maximum number of storage devices that you can add to a single storage pool is 32

B) RAID volumes are created on a virtual disk that utilizes space in a storage pool comprised of storage devices C) Virtual disks implement a level of RAID and can use thin or thick provisioning

To set a domain controller to use DS repair mode at the next restart, what should you do after logging on to the domain controller? A) Restart the domain controller B) Run the msconfig.exe tool C) Restore from the backup D) Enable the Active Directory repair option in the System Repair dialog box

B) Run the msconfig.exe tool

Which service can be started on a system to reduce the amount of time it takes to repair filesystem errors? A) Storage Spaces B) Spot Verifier C) Volume Repair D) Data Deduplication

B) Spot Verifier

Another server administrator has configured an iSCSI SAN device to provide storage to your Windows Server 2019 system. What must you configure on your Windows Server 2019 system in order to connect to this storage? A) iSCSI HBA B) iSCSI initiator C) iSCSI target D) MPIO

B) iSCSI initiator

Which of the following RAID volume types provide fault tolerance in the event of a single storage device failure? (Choose all that apply.) A) striping B) striping with parity C) mirroring D) JBOD

B) striping with parity C) mirroring

You wish to create a RAID level 5 volume using the Disk Management tool. How many storage devices can you use in the volume? A) 3 B) 7 C) 32 D) There is no limit.

C) 32

Which of the following PowerShell command is used to install a Windows Server Backup on Windows Server 2019? A) Add-WindowsFeature windows-server-backup B) Add-WindowsFeature server-backup -IncludeManagementTools C) Add-WindowsFeature windows-server-backup -IncludeManagementTools D) Add-Feature windows-server-backup -IncludeManagementTools

C) Add-WindowsFeature windows-server-backup -IncludeManagementTools

What could be the primary reason to implement Resilient File System (ReFS) on Windows Server 2019 instead of a New Technology File System (NTFS)? A) It supports Reparse Points B) It preserves and enforces ACLs C) It can detect data corruption when used with Storage Spaces D) It supports USN Journal

C) It can detect data corruption when used with Storage Spaces

You have configured a new storage pool in Server Manager that contains 5 storage devices and would like to configure a single virtual disk that uses all of the available capacity from this pool. What RAID type should you select in the New Virtual Disk Wizard if you wish to ensure that your virtual disk remains fault tolerant in the event that two storage devices fail at the same time? A) Simple B) Striped C) Mirror D) Parity

C) Mirror

You have a server with multiple disks but with no RAID configured. You want to mirror the C drive with D drive. Which of the following RAID should you configure? A) RAID 0 B) RAID 5 C) RAID 1 D) RAID 5+1

C) RAID 1

After noticing a RAID level 5 volume in Disk Management with a status of Failed Redundancy, you located and replaced the failed storage device with a new one. What must you do to return the volume status to Healthy? A) Nothing, as the data will automatically be rebuilt on the new storage device B) Right-click the RAID volume and click Reactivate Volume C) Right-click the RAID volume, click Repair Volume, and select the new storage device D) Delete and recreate the RAID volume, and then restore data from a backup

C) Right-click the RAID volume, click Repair Volume, and select the new storage device

Identify the output of the following PowerShell command: Get-VHD c:\engineering.vhd A) Links engineering.vhd to the virtual machine B) Creates a connection with engineering.vhd C) Verifies the system properties of engineering.vhd D) Creates a new VHD named engineering

C) Verifies the system properties of engineering.vhd

The following screenshot shows an organizational unit that was mistakenly deleted by IT support: This image shows an organizational unit. Complete the following command in ntdsutil to recover the deleted user with authoritative restore. restore [blank] "OU=APAC,DC=PRACTICELABS,DC=COM" A) OU B) Container C) Folder D) Subtree

D) Subtree

You execute the following command in PowerShell:Set-Disk -Number 3 -IsReadOnly $false A) What would be the output of this command? B) Creates a new disk with the name 3 and turns on the read-only attribute C) Creates a new disk with the name 3 and turns off Read-only attribute D) Sets an existing disk to disk 3 with the read-only attribute E) Turns off the Read-only attribute on Disk number 3

E) Turns off the Read-only attribute on Disk number 3

On systems that have a UEFI BIOS, the UEFI system partition is the boot partition. A) True B) False

B) False

When restoring a backup, you can choose to restore the data to a different location. A) True B) False

A) True

When you click the Optimize button for a simple volume in the Optimize Drives window, the underlying storage device is defragmented if it is a hard disk, or trimmed if it is an SSD. A) True B) False

A) True

What two items must you configure using Server Manager in order to share storage to other systems using iSCSI? A) iSCSI virtual disk B) clustered storage pool C) iSCSI target D) iSCSI initiator

A) iSCSI virtual disk C) iSCSI target

Which of the following are reasons for creating multiple volumes on a single storage device? (Choose all that apply.) A) Allow for the use of more than one type of filesystem B) Reduce the chance that filesystem corruption will render all data on the storage device unusable C) Segregate different types of data D) Speed up access to stored data by keeping filesystems as small as possible

(All of the above) A) Allow for the use of more than one type of filesystem B) Reduce the chance that filesystem corruption will render all data on the storage device unusable C) Segregate different types of data D) Speed up access to stored data by keeping filesystems as small as possible

Which of the following are requirements for each server in a Storage Spaces Direct configuration? (Choose all that apply.) A) Failover Clustering feature installed B) 64 GB of memory and at least two processors C) At least six additional storage devices (two or more of which are SSDs) D) 10 Gb Ethernet interface with RDMA support

A) Failover Clustering feature installed C) At least six additional storage devices (two or more of which are SSDs) D) 10 Gb Ethernet interface with RDMA support

Which of the following statements regarding backup performance options for Windows Server Backup are true? (Choose all that apply.) A) Full backups provide the fastest restoration of data B) Incremental backups take less time to perform than full backups C) Up to 6 incremental backups can be performed following a full backup D) Full backups back up files that have the archive attribute set

A) Full backups provide the fastest restoration of data B) Incremental backups take less time to perform than full backups

What name format is used to specify the iSCSI initiators that are permitted to connect to an iSCSI target? A) IQN B) FQDN C) IDN D) UNC

A) IQN

The selected user account in the screenshot was accidentally deleted by the IT support group: This image shows the Active Directory Users and Computers window and the account Lisa Scott selected. Complete the following command in ntdsutil to recover the deleted user with authoritative restore. restore [blank] "CN=Lisa Scott, OU=IT,OU=APAC,DC=PRACTICELABS,DC=COM" A) Object B) ADUser C) User D) Account

A) Object

Which type of RAID provides fault tolerance through the use of parity information spread across the member disk volumes? A) RAID 5 B) RAID 0 C) RAID 1 D) RAID 5+1

A) RAID 5

Where are the GPOs contained? A) SYSVOL B) System start-up files C) Active Directory database D) System registry

A) SYSVOL

After storage tiers have been enabled for the storage used by a volume, you can use the Set-FileStorageTier cmdlet in Windows PowerShell to ensure that a specific file is always stored on a specified storage tier. A) True B) False

A) True

By supplying the device driver for an FC HBA during a Windows Server 2019 installation, you can choose to install Windows Server 2019 on FC SAN storage instead of a local storage device. A) True B) False

A) True

When initializing a new storage device that has a capacity larger than 2 TB, you must use a GPT instead of an MBR. A) True B) False

A) True