OM

Identify the Order Management configuration setup that must be performed by a system administrator in order to define an external source system connector. Mark for Review A. The connector service needs to be registered by using Manage Web service. B. The source systems link needs to be registered in Manage Web Service, C. The source system connector needs to be collected into Order Management's data repository. D. The source system needs to be registered in Manage Web Service.

A

In min max planning, which is considered supply for replenishment calculations a. on-hand balances b. sales orders c. Material issues d. pending shipments

A

The order manager in your company likes to monitor order delivery commitments in real time for customers. Identify the Order Management Oracle Transactional Business Intelligence (OTBI) dashboard that can be used to get all possible root causes for orders that are not fulfilled on time. A. Orders on Past Due B. Fulfillment line in Jeopardy C. Orders on Backorder D. Orders on Hold E. Orders in Jeopardy

A

Which change mode takes a snapshot at the stages mentioned below: When the orchestration process starts When a change order is received at an orchestration process step A. Simple B. None C. Advanced D. Incremental

A

Service mappings can now be used to help meet your specific integration requirements for your supply chain tools. If you need to integrate objects from a sales order with a purchase order, which three supply chain modules would be required? A. Procurement Cloud B. Supply Planning Cloud C. Supply Chain Orchestration Cloud D. Business Process Management Cloud E. Order Management Cloud

ACE

Which 2 components of Oracle business rules will be validated by a bucket set during the definition of a rule? A. Rule Conditions B. Facts C. Branching Condition D. Decision Tables

AD

A drop ship sales order line is created for an item with quantity as 10. Later a revision is made on this drop ship sales order to increase the quantity to 15. Ма Which stage of the fulfillment process will accept this change on the drop ship sales order? a. The purchase order schedule against this drop ship sales order line has been partially shipped. B. A purchase order is created against the drop ship sales order but it is not yet shipped by the supplier. C. The entire quantity in the purchase order schedule has been shipped by the supplier. D. A requisition is created from the drop ship sales order but the purchase order is yet to be created.

B

A tax authority requires that you calculate tax only on the selling price of an item that you are selling, and not on the shipping charge. How can you achieve this? a. By modifying the pricing algorithm to reverse the tax amount calculated for shipping during the "Compute Tax" step. B. By moving the "Compute Tax" step before the "Create Shipping Charges" step in the Pricing algorithm. C. By creating a subalgorithm and an expression builder integrated with the tax engine. D. By using nested action and Groovy scripts to remove the Shipping Charges calculation. E. By moving the "Compute Tax" step before the "Create Net Price Charge Component" step in the Pricing algorithm.

B

Company A has set up different sourcing rules for Item X at each of the assignment levels specified below, all under a single assignment set. >Item and customer >Item and demand region >Item and region >Item and Organization When a global sales order is booked, which assignment level will be given the highest priority? A. Item and region B. Item and customer C. Item and Demand Class D. Item and Organization

B

You created a pricing strategy, but notice that it is still showing the status as "In Progress". What action will change the status to "Approved"? A. You need to save the pricing strategy B. You must click the approve button C. The approvers in the approval life cycle need to review and approve the strategy. D. You must first add a discount list to the pricing strategy. After you save it, the pricing strategy will show it has been approved. E. You must first assign your pricing strategy to a pricing segment

B

You have imported a model and ensured that the Snapshot is up to date but you cannot see the updated snapshot in the workspace. What do you need to do? A. Go to Actions > Synchronize with Snapshot B. Add the updated snapshot to the workspace C. Remove the model and add it again D. Refresh at a different depth because your changes may not have been picked E. Lock the snapshot participant in the workspace.

B

You need to create a sales price structure that adjusts the selling price of a metal product based on its alloy. Which pricing component best suits this requirement? A. Pricing Segment B. Attribute based adjustment C. GSA List Price D. Pricing Guideline

B

Your client has created several different configurations for several models, but none of them have prefixes or suffixes. The client now wants to find all configurations for a given model. How can the client find these configurations? A. Searching by "Item" in Manage Items by using "Starts with" B. Searching by "Base Model" in Manage C. Items Searching by "Item Catalog" in Manage Items D. Searching by "Parent Item" in Manage Items E. Searching by "Created From" in Manage Items

B

The Order Manager in your company likes to monitor order delivery commitments in real time for customers. Identify the order management Oracle transactional business intelligence (OTBI) dashboard that can be used to get all possible root causes for orders that are not fulfilled on time. A. Fulfillment line in jeopardy B. Orders on hold C. Orders on past due D. Orders in jeopardy E. Orders on Backorder

C

Which two aspects of Configurator models should the client use to set this up? User Interface Contra-product Rules Model Structure Guided Selling Parameters Configurator Rules

CE

You have deployed Extensible Flexfield (EFF) successfully but it is not visible in the Order Capture Additional Information section. Identify the two reasons for this behavior. A. The EFF definition needs to be frozen. B. The EFF has not been compiled. C. The EFF context is not associated with the page. D. The EFF segments are incomplete. E. The custom extensible flexfields are not published.

CE

Your customer has internal sales within the company, handled as cost transfers, as well as external sales. Which two services they would need to use? A. Price Material Transfer B. Price Request C. Material Transfer D. Price Sales Transaction E. Sales

CE

A company manufactures and ships industrial water filters from its only factory unit in India. Which four types of lead time can the company use to create promising rules in lead-time promising mode? processing lead time supplier lead time total lead time transit lead time cumulative total lead time user-defined lead time cumulative manufacturing lead time

CEFG

What is the correct sequence of steps for setting up the preceding constraint? A. Create a constraint entity > Enable the extensible flexfield > Create a record set > Create a validation rule set > Create the processing constraint B. Enable the extensible flexfield > Create a validation rule set > Create a record set > Create the processing constraint C. Enable the extensible flexfield > Create a record set > Create a validation rule set > Create the processing constraint D. Enable the extensible flexfield > Create a validation rule set > Create the processing constraint E. Create a constraint entity > Enable the extensible flexfield > Create a validation rule set > Create a record set > Create the processing constraint.

D

Which fulfillment technique uses a mode where supply is hard-pegged as demand against an order? Internal material transfer Drop shipment Intra-org order Back to back

D

Which listing displays the required fields when creating a pricing strategy here A. Name, Description, Default currency and start date B. Name, Description, Objective and start date C. Name, Business Unit, Start date, and End date D. Name, Business Unit, Default currency, and Start date E. Name, Business Unit, Default currency, and Objective

D

Which reporting tool enables you to create ad-hoc reports in Excel for the PowerPoint by using their subject areas? A. BI Answers B. eText report layout templates C. BI Composer D. SmartView Integration

D

Which statement is NOT true about shipping tolerances? A. Tolerances are supported for orders from multiple order entry channels. B. Only customer shipments from warehouses are supported. C. Only standard items are supported. D. Tolerance values can be modified in an order revision.

D

You import an item-based model structure into the Configurator Modeling Environment, but realize that the minimum for one of your component attributes is incorrectly assigned. What should you do, prior to releasing, to resolve this issue? A. After the item-based model structure is imported, you must wait until after it is released to make the changes. B. Make the changes in the Product Hub or the Configurator Modeling Environment. All the changes are automatically reflected in the other area (that is, changes in the Configurator Modeling Environment will show in the Product Hub and vice versa). C. You cannot change the item's user-defined attributes D. Make the changes in the Product Hub and refresh the snapshot for the item-based model structure. E. Make the changes in the Configurator Modeling Environment on the Item Attributes tab of the model's details.

D

You want to delete a sales order from an external channel order system after you delete the interfaced order in Order Management. Which method must you use? A. The channel order system sales order will be automatically deleted upon deleting the order in Order Management B. Configure an external interface routing rule to route the deletion task to the channel order system C. Configure a business event notification to send the request to the channel order system. D. Enable the delivered REST service to execute the deletion of the order from the channel order system

D

Your company has multiple upstream order capture systems that need to feed into OM Cloud. Which import methods are supported? A. Direct web service integration B. File-based import C. Business-to-Business Messaging D. All of these methods

D

A customer creates a price list component but is unable to view the approve button in the price list. Which role is missing that will allow the customer to do this? A. Pricing manager B. Pricing Viewer C. Pricing specialist D. Pricing Analyst E. Pricing Administrator

A

A customer has a product which they bill monthly. Which price type would they use for this? Recurring Subscription Monthly Quarterly One Time

A

A furniture retailer wants its online buyers to first choose their underlying need, which will then direct them to the related list of accessories and product parts of the configurable furniture product. The retailer intends to do this by presenting standard questions to the online buyers on their needs, and then presenting the related list of accessories and parts through dynamic user interfaces. What step is required to enable this feature? A. Add a supplemental structure to the root node of the item-based model in the workspace area of the Configurator. B. Add a supplemental structure to the root node of the item-based model in Fusion Product Hub, and then import it into the Configurator. C. Add a supplemental structure at the option class level for each model product in Fusion Product Hub, and then import it into the Configurator. D. Add a supplemental structure to the option classes of the item-based model in th

A

Which 3 types of processing modes are available for misc. issues and receipts? A. online B. batch C. Concurrent D. Background

ACD

You are trying to edit a model structure by using the Edit Configurator Model page. However, you are allowed to view the model and not edit it. Which is a possible reason you are not allowed to edit? A. The model is locked by another user B. Only the user that created the model can edit it C. You can edit the model only by accessing it via Manage workspace page D. You can edit only the oldest version of the model E. You can edit snapshots, but you cannot edit models

A

Your client wants to change the pricing totals display in Order Management so that the "Pay Now" reads "Amount Due" instead. What needs to be configured to meet this requirement? A. Manage Pricing Totals > Change QP_TOTAL_PAY_NOW name to Amount Due B. Manage Pricing Lookups > ORA_QP_PRICING_CONTEXTS > Select Net Price lookup code > Change lookup meaning to Amount Due C. Manage Pricing Lookups > ORA_QP_PRICING_STATUS Select Pay Now lookup code > Change lookup meaning to Amount Due D. Manage Pricing Lookups > ORA_QP_PRICING_CONTEXTS > Select Pay Now lookup code > E. Change lookup meaning to Amount Due Manage Pricing Totals > Change QP_TOTAL_NET_PRICE name to Amount Due

A

Your company has implemented a Cost of Change Rule that charges a customer for requested changes once the order line has been allowed. Additionally no changes are allowed after the good are staged. Which fulfilment status will trigger compensation in the Cost of Change Rule and impose charges on the customer when the sales order is changed ? A. Released to warehouse B. Ready to release C. Back ordered D. Staged

A

5. Order Management includes a feature to validate advanced shipping notices in drop ship flows. In which three scenarios will the application automatically attempt to recover errors on an order? A. An attempt is made to process an advance shipment notice while someone is revising the sales order or when a change on the purchase order has not completed. B. You receive an advance shipment notice, but the sales order and purchase order are not synchronized with each other. C. You receive an advance shipment notice, but the purchase order details are not available to the sales order. D. An attempt is made to process an advance shipment notice against a purchase order and the sales order has failed the create-supply line process.

ABC

Which three promising modes are possible through GOP for the company's products? A. supply chain availability B. Infinite availability C. Lead times D. Global availability E. Zone-based availability

ABC

Based on seeded attribute settings, updating which of the following sales order entities would automatically trigger a change order to an existing order in Order Management Cloud? (Choose 4) A. Unit Selling Price B. Ordered UOM C. Requested Ship Date D. Ordered Quantity E. Customer PO

ABCD

Your customer requires order revisions from an external system. The customer is concerned that all order lines will have to be sent again in the revised order even though the customer typically changes only one or two lines. Which three statements are true? A. A revised order can contain just updated order line B. Order lines can be canceled by sending a cancellation request C. Missing order lines are assumed to be cancelled D. Missing order lines are not assumed to be cancelled E. All Order lines will have to be sent again in the revised order.

ABD

Oracle Pricing cloud uses REST web services to facilitate integration with external systems. Which 4 pricing functions can be managed using a REST service? A. Manage pricing segments B. Manage Discount lists C. Manage Pricing Matrices D. Calculate Document Prices E. Manage Pricing guidelines F. Manage pricing strategy assignments

ABDF

You have scheduled a group of 60 sales order lines of a single sales order, View, you perform a Check availability for all the lines after 10 minutes and option was closer to your promising results. Identify the 4 metrics that the system offers as a built-in feature to cloud A. On-time results B. delay results C. item relationships D. total margin E. substitute item usage F. total fulfillment cost

ABDF

Supply Chain Financial Orchestration supports which three things? A. Separate physical movement from financial flow B. Infrastructure and framework to define the financial trade and physical flows independently C. Resource transactions are interfaced directly from Manufacturing D. The user interface gives you the status of the orchestration transactions item serial numbers E. Configuration to define cost-based, document-based support for third-party transfer pricing rules

ABE

Which four options apply to the "Lead Time" mode? A. Lead time can be specified in multiple ways. B. The item is promised on the requested date irrespective of availability. C. The order promising engine does not generate any pegging. D. Lead time must be configured the same across organizations. E. No supply availability search is performed. F. Calendars and transit time constraints are respected.

ABEF

When creating an external interface routing rule which two attributes are available for selecting a fulfillment system A. Fulfillment line B. Process definition C. Status condition D. Task Layer Service E. Line status

AC

Which two are subtabs of the Edit Configurator Model Page > Structure tab A. Item attributes B. User interfaces C. Supplemental structures D. Rules E. Applicability

AC

Your customer is concerned about not having access to schedule orders and check availability when the Global Order Promising server is down. Which two statements are true? A. Global Order Promising continues promising orders based on lead-time availability until the server or backup server can be restarted. B. Affected orders cannot be rescheduled based on supply chain availability search after server recovery. C. Global Order Promising cannot continue pomising orders, but the server or backup server is usually restarted quickly. D. Affected orders can be rescheduled based on supply chain availability search after server recovery. E. Global Order Promising continues promising orders based on supply chain availability search until the server or backup server can be restarted.

AD

Which three statements are true regarding Managing Units of Measure? A. If you want to transact items in units of measures that belong to classes other than their primary UOM class, you must define conversion between the base units of measure in different UOM classes B. Conversions between classes are unique for each item, the conversion rate varies for intraclass units of measure C. A unit of measure standard conversion specifies the conversion factor by which the unit of measure is equivalent to the unit of measure class D. A unit of measure conversion is a mathematical relationship between two different units of measure E. You must define Unit of measure class with a base unit of measure

ADE

4 things to enhance selling A. display product reviews of customers who have purchased the same configuration earlier. B. test the behavior of the configured model anytime when you are editing it. C. allow buyers to raise requests if an expected product functionality is not offered. D. enable a checkout option for a model when a valid configuration is finalized. E. create user interfaces that will be dynamically presented to users based on the options chosen in the Configurator Model. F. create enhancements to the model structure that supplements the imported configurable structure of a model item. G. create rules that will guide users in creating a valid model.

ADEF

For the other hosting application, you want a more guided interface that takes the users through each step and hides some of the product details that may be confusing. A. By building a Configurator rule that shows different options based on the application that is accessing. B. By building two separate user interfaces and for each UI, selecting the corresponding application under Applicability Parameters in the user interface setup. C. By doing nothing. You cannot have more than one UI based on the different applications that are accessing it. All users will have to use the more simplified method D. By using Dynamic Tree Navigation and making the first question that users are prompted with to be related to the interface that they want to use. E. By using different languages. For example, you can have the first hosting application provide access by using American English and the second hosting

B

When creating a claim for short payment, which of the following lists the steps in the correct order? A. Review and research claim > Receive short payment > Create deductions claim > Create & Apply Credit Memo or Overpayment B. Receive short payment > Create deductions claim > Review and research claim > Create & Apply Credit Memo or Overpayment C. Create & Apply Credit Memo or Overpayment > Create deductions claim > Receive short payment > Review and research claim D. Create deductions claim > Receive short payment > Review and research claim > Create & Apply Credit Memo or Overpayment

B

Which Org assignment type is required for back-to-back supply creation and fulfillment in GOP? A. Global B. Local

B

Which is the correct sequence for the process? SCO sends validated attributes to Inventory Management for transfer order. SCO gets default values for the project attributes not imported. SCO performs a project accounting transaction control (PATC). Inventory management updates transfer order with new attributes. SCO gets default values for the project attributes not imported. SCO performs a project accounting transaction control (PATC). SCO sends validated attributes to Inventory Management for transfer order. Inventory management updates transfer order with new attributes. SCO performs a project accounting transaction control (PATC). SCO gets default values for the project attributes not imported. SCO sends validated attributes to Inventory Management for transfer order. Inventory management updates transfer order with new attributes. SCO performs a project accounting transaction control (PATC). Inventory manage

B

Which orchestration solution can be used to manage internal drop shipments and revenue recognition? a. supply chain orchestration b. supply chain financial orchestration c. Distributed order orchestration d. order management

B

Your company has a business process to move material between different warehouse within the enterprise and the warehouse user creates a Transfer order document to perform this material transfer. The warehouse user also needs to fulfill demands from external customers' Sales Order'. The warehouse user, therefore, wants to have visibility of both the Transfer Orders and the Sales Orders, and wants to prioritize the shipments between them. What configuration is required to meet this requirement? A. Update the Manage Supply executing document creation rule. B. Create a Release Sequence rule. C. Update the Supply order defaulting and enrichment rule D. Create a Pick slip grouping rule E. Create a Pick wave release rule.

B

Your company has different fulfilment methods for the types of products ordered, and needs to assign an orchestration process based on the item type of the product. Identify the setup that is required to achieve this by using the Process Assignment Request Rules (OBR). A. Create one rule to assign the process based on the item type bucket set. B. Create one rule to assign the process based on item type data. C. Create one rule to get item data and assign the process based on the item type data. D. Create two rules: 1 Get item data, 2 Assign the process based on the Item type data that is returned from the first rule

B

Your company wants to measure the percentage of adherence to a customer's originally negotiated delivery request date against the actual shipment. What metric would you need to use to track the performance? A. overall margin percentage B. number of demand lines scheduled late C. value of demand lines scheduled late D. number of demands line scheduled on time

B

Your company wants to measure the percentage of adherence to a customer's originally negotiated delivery request date against the actual shipment. What metric would you use to track the performance? Value of demand lines scheduled late Number of demand lines scheduled late Number of demand lines scheduled on time Overall margin percentage

B

Your organization follows a pricing policy to determine the applicable price list based on the customer channel: Online, Dealer or Retail Store, through which their customers place their orders. What configuration should be used to calculate the correct sales order price? Line Pricing Strategy Assignment Sales Pricing Strategy Assignment Pricing Segment Price List Strategy Assignment Pricing Term Adjustment

B

How would you set up the Configured Item Number Generation? A. Starting Number: 100 Prefix Type: Model Item Number Increment by: 10 Suffix Type: User Defined Suffix: CNF Delimiter: Hyphen B. Starting Number: 10000 Prefix Type: Model Item Number Increment by: 10 Suffix Type: None Delimiter: Hyphen C. Starting Number: 10000 Prefix Type: User Defined Prefix: CNF Increment by: 10 Suffix Type: Model Item Number Delimiter: Hyphen D. Starting Number: 10000 Prefix Type: User Defined Prefix: CNF- Increment by: 1 Suffix Type: Model Item Number Delimiter: None E. Starting Number: 10000 Prefix Type: User Defined Prefix: CNF Increment by: 10 Suffix Type: User Defined Suffix: Model Item Number Delimiter: Underscore

C

Which two activities can you perform by using Global Order Promising's stand-alone work area? A. You can simulate the Capable-to-Promise option in place of the Available-to-Promise option for quicker fulfillment. B. You can re-schedule order lines that are already scheduled C. You can split quantities against a Sales Order Line to perform what-if simulations and evaluate better ways of promising an order. D. You can initiate back-to-back orders to expedite fulfillment of lines with a delayed schedule ship date.

BC

Which two tasks are used to set up statuses in the orchestration process configuration in the Functional Setup Manager? A. Manager orchestration status values B. Manage task status condition C. Manage status values D. Define orchestration status

BC

Using BI Publisher, Excel can export Supplier Claims to which of the following three output formats? TXT CSV XML XLS HTML

BCD

Which are the three functional setup manager roles delivered out of the box A. Super User B. Functional Owner C. Application Implementation Consultant D. Application Implementation Manager

BCD

Which three mandatory setups must be performed so that a purchase request has created for the sales order that will be fulfilled by a drop ship supplier? A. Select the check box "Use Customer sales order" in the Group Requisitions section in the blanket purchase agreement. B. Specify the preparer name in the Order Management parameters. C. Select the Customer Sales Order Fulfillment check box under the Procurement offering D. Define Outsourcing rule of type Buy with a supplier and supplier site E. Create a business rule in supply chain orchestration

BCD

Which three mandatory setups must be performed so that a purchase request is created for sales orders that will be fulfilled by a drop ship supplier? A. Select the check box "Use Customer sales order" in the Group Requisitions section in the blanket purchase agreement. B. Define a sourcing rule of type Buy with a supplier and supplier site. C. Specify the preparer name in the Order Management parameters. D. Select the Customer Sales Order Fulfillment check box under the Procurement offering. E. Create a business rule in Supply Chain Orchestration.

BCD

The supply chain orchestration work area supply line overview page displays supply lines that are aggregated and grouped. Which 4 are grouped? A. Rejections b. errors c. exceptions d. jepardy e. on-track

BCDE

Which three general statements about Managerial Accounting are correct? A. Supply Chain Orchestration automatically selects the correct process based on user-defined subleadger accounting rules when a supply creation is initiated. B. Receipt Accounting is the application that performs the accrual accounting for all types of receipts. C. Landed Cost Management gives organizations financial visibility into their extended supply chain costs. D. A cost organization does not require a primary cost book associated with the primary ledger. E. Cost method can be defined granularity down to individual items.

BCE

Which three statements are true about the Extensible Flexfields setup for order capture integration? A. The XLST "Copy-of" feature only for the Decomposition (Sales Order Integration), Template Task Layer, and Fulfillment Task Layer. B. The Extensible Flexfield Implementation requires customers to manually map incoming Extensible Flexfield data to all Order Management entities. C. If the extensible attributes need to be passed to or received from downstream applications, the values must be passed in the payload structure. D. The XLST "Copy-of" feature dynamically maps the input Extensible Flexfields to the Order Management entities and the Extensible Flexfield Order Management entity to SDO/custom node for all Task Layers. E. If the attribute information will be provided during the import process, the values should be provided in the import web service payload structure.

BCE

Order Management Cloud has a feature to keep the dates on your sales order synchronized with the dates on the purchase order. For example, if you update the shipment date, delivery date, or shipment method on a purchase order that you manually create or on an open purchase order that you revise, then this feature automatically updates these values on the sales order line and adds the reason for the change. Which four item types support this feature? Subscription Assemble-to-order Standard Coverage Items in a shipment set or kit Pick-to-order

BCEF

What action(s) must be performed on the orchestration process user interface to activate an orchestration process after the order orchestration configurations are completed? a. Download the generated orchestration process. B. Release and deploy the orchestration process. C. Release and generate the orchestration process. D. Validate the orchestration process.

BD

Your customer is concerned about not having access to Scheduled orders and checking availability when the Global Order promising system server is down. Which two statements are true? A. Affected orders cannot be rescheduled based on supply chain availability search after server recovery B. Affected orders can be rescheduled based on supply chain availability search after server recovery C. Global Order promising cannot continue promising orders, but the server or backed up server is usually restarted quickly D. Global Order promising continues promising orders paste on lead time availability until the server or backup server can be restarted E. Global order promising promising orders based on supply chain availability search until the server or backup server can be restarted.

BD

Order management cloud can be integrated with multiple order capture and fulfillment systems. This is achieved through the setup of the External Interface Layer. Which four configurations are involved in setting up the External Interface layer? A. Manager Order Management Extensions B. Manage External Interface Transformation Style Sheets C. Manage Business Event Trigger Points D. Manage External Interface Routing Rules E. Manage External Interface Web Server Details F. Manage Integration With Oracle Fusion Order Management

BDEF

Based on the trading partner item relationship which of the following flows support supplier items (choose two) A. When creating a manual adjustment B. when creating a manual invoice C. All of the above D. All Channel flows E. When creating a supplier program

BE

Your client has asked you to modify how tax is calculated in Pricing and displayed in order management. Which two steps should you perform to ensure that these requirements are met? A. Modify pricing descriptive flexfields. B. Modify pricing totals setup C. Modify the pricing message token attributes D. Modify pricing totals display settings in Order management work area E. Modify the pricing algorithm

BE

Your company wants to default the preferred fulfillment warehouse and scheduled ship date as order requested date during order import and skip the scheduling task for a particular order type. What are the two business rules that must be configured to achieve this requirement? A. Define a compensation pattern rule B. Define a line selection criteria rule for the scheduling task C. Define a branching condition rule D. Define a bucket list for cross-referencing E. Define a pre-transformation defaulting rule F. Define a lead time expression rule

BE

You are trying to update the rules for a configurator model, but are unable to do so. What are three possible reasons for this? A. The workspace is in "In Development" status and you have locked the model. B. The model is locked by another user. C. The model is unlocked. D. The model is in "Approved" status. E. The workspace is in " In Development" status, but you have not locked the model F. The workspace status is "Released"

BEF

As a part of your sales order process, you need to initiate a customer reward program. Which orchestration process task type should be used for this requirement? A. Schedule B. Reservation C. Fulfill D. Procurement

C

What is the correct sequence for defining an external source system? A. Define the external source system as a collection source Define item org in the product model. Load organization and calendar data Execute collection for order management B. Define item org in the product model. Define the external source system as a collection source Load organization and calendar data Execute collection for order management C. Load organization and calendar data Define the external source system as a collection source Define item org in the product model. Execute collection for order management D. Define item org in the product model. Load organization and calendar data Define the external source system as a collection source Execute collection for order management

C

When a shipment line has an item with stock discrepancy or damage the warehouse will not enter the shipped quantity for that line. Instead, that line should get unassigned from the shipment and should be considered for cycle count adjustment automatically. What would you do to meet the req? A. Enable the " submit all for cycle count in shipping params" options B. Enable the "submit all for cycle count" option in the confirm pick slip UI C. use the ship confirmation rule by selecting the "cycle count" radio button for the "specify options if shipped quantities are not manually entered" option D. Define a picking rule E. Enable the "submit all for cycle count for the shipment line" option in manage shipments UI

C

When creating a claim for a short payment, which of the following lists the correct order? A. Create Deductions Claim > Receive Short Payment > Review & Research Claim > Create & Apply Short Payment B. Review & Research Claim > Receive Short Payment > Create Deductions Claim > Create & Apply Credit Memo or Overpayment C. Receive Short Payment > Create Deductions Claim > Review & Research Claim > Create & Apply Credit Memo or Overpayment D. Create & Apply Credit Memo or Overpayment > Create Deductions Claim > Receive Short Payment > Review & Research Claim

C

When importing an order from an external order capture system, you need to use characteristics of the customer's shipping address to determine what specific accessories should be included in the imported order. Which transformation rule type suits this requirement? A. Product-to-product B. Attribute-to-product C. Context-to-product D. Attribute-to-attribute

C

Which is not a required field for registering a web service on the Manage web service screen A. Connector Description B. Username and password C. Order Information Service D. Connector URL E. Connector name

C

Which process requires the Process Supply Chain Orchestration Interface process to be executed manually so that a supply order gets created? A. Drop Shipment B. Planned Order Releases C. Min-Max planning replenishing a purchase request D. Back-to-Back Contract Manufacuring E. Back-to-Back Procurement

C

Your organization follows a pricing policy to determine the applicable price list based on the customer channel: online, dealer or retail store which their customers used to place an order. What configuration should be used to calculate the correct sales order price? A. Pricing Segment B. Pricing Term Adjustment C. Sales Pricing Strategy Assignment D. Line Pricing Strategy Assignment E. Price List Strategy Assignment

C

Based on the Trading Partner item relationship, which TWO of the following flows support Supplier Items? A. All Channel flows B. When creating a manual adjustment C. When creating a supplier program D. When creating a manual invoice

CD

What are two basic differences between configurable model structures and supplemental structures? A. Supplemental structures allow you to add option classes, whereas configurable model structures allow you to add option features. B. Changes to supplemental structures must be re-imported into the Configurator Model Environment, whereas changes to configurable model structures are automatically reflected in the Configurator Model Environment. C. Configurable model structures enable you to accurately model configuration behavior for product items, whereas supplemental structures enable you to provide a framework for guided, selling questions. D. Configurable model structures are created in the Product Hub whereas supplemental structures are created in the configurator model environment

CD

Which two activities can you perform by using Global Promising's stand alone work area? A. You can stimulate the Capable-to-Promise option in place of the Available-to- Promikse option B. You can initiate back-to-back orders to expedite fulfillment of lines with a delayed scheduled ship date C. You can split quantities against a sales-order line to perform what if simulations and evaluate better ways of promising an order D. You can re-schedule order lines that are already scheduled

CD

Which two steps are required to fulfill the demand for this company through outsourced manufacturing ? A. Model the manufacturer to which the component's production is outsourced as a Supplier in the enterprise. B. Create a sourcing rule of the Make type for this component in the selling inventory organization. C. Define this component as an Item with the "Contract Manufacturing" field enabled and the "Make or Buy" attribute set to "Buy". D. Select the Customer Sales Order Fulfillment check box under the Procurement Offering E. Define this component as an Item with the "Contract Manufacturing" field enabled and the "Make or Buy" attribute set to "Make". F. Create a Sourcing rule of the Buy type for this component in the selling inventory organization

CF

A Tax Authority requires that you calculate tax only on the selling price of an item that you are selling, and not on the shipping charge. How can you achieve this? A. By creating a sub algorithm and an expression builder B. By modifying the pricing algorithm to reverse the tax amount calculated for shipping during the "Compute Tax" step C. By moving the "Compute Tax" step before the "Create net price charge component" step in the Pricing algorithm D. By moving "Compute Tax" step before the "Create shipping charges" step in the Pricing algorithm E. By using nested action and Groovy Scripts

D

A drop ship sales order is created for an item with quantity of 10. Later a revision is made on this drop ship sales order to 15. Which state of the Fulfillment process will accept this change on the Dropship sales order? A. A requisition is created from the drop ship sales order but the purchase order is yet to be created. B. The purchase order schedule against this drop ship sales order line has been partially shipped C. The entire quantity in the purchase order scheduled has been shipped by the supplier D. A purchase order is created against the drop ship sales order but it is not yet shipped by the supplier.

D

Channel Revenue Management allows for the settlement of an invoice-specific claim. Which two are methods for resolving an invoice overpayment? a. Applying open overpayments b. Credit memo on account c. Credit memo on invoice d. Open deduction e. Invoice

DE

You are trying to edit a model structure by using the Edit Configurator Model page. However, you are allowed to only view the model, not edit it. Which is a possible reason you are not allowed to edit? A. You can edit snapshots, but you cannot edit models. B. You can edit only the oldest version of the model. C. You can edit a model only by accessing it via the Manage Workspace page. D. Only the user that created the model can edit it. E. The model is locked by another user.

E

You have imported a model and ensured that the snapshot is up to date, but you cannot see the updated snapshot in the workspace. What do you need to do? A. Refresh at a different depth because your,changes may not have been picked up. B. Remove the model and add it again. C. Lock the snapshot participant in the workspace. D. Go to Actions > Synchronize with Snapshot. E. Add the updated snapshot to the workspace.

E

Your client has customer service representatives in Brazil, China and UK. They sell the tablet model 'PRO1000' which needs to be configured at the time of order. However the configuration UI needs to be presented in the local language to each set of represntatives. How would you configure this? A. Use Multi-Lingual Converter when building the UI B. It is not possible to show in any other language than English C. On the UI Design tab, click the Translation button, and then enter the text for all installed D. The Language for the UI is set by language that is in use when it is created. The Creator must therefore log in each language and build the UI for that language. E. Create a separate UI for each language and use the Applicability Parameters to select

E

Your customer would like automatic e-mail notifications to be sent for specific business events. On the manage business unit trigger, which business event trigger points can be used to enable email notifications A. Hold and split B. Change order compensation complete and hold C. Order attribute update and hold D. Order header status update and order attribute update E. Order header status update and hold

E

Your company wants to default the preferred fulfillment warehouse and scheduled ship date as order requested date during order import and skip the scheduling task for a particular order type. What are the two business rules that must be configured to achieve this requirement? Define a bucket list for cross-referencing. Define a lead time expression rule. Define a compensation pattern rule. Define a branching condition rule. Define a pre-transformation defaulting rule. Define a line selection criteria rule for the scheduling task.

EF