Quiz Review-ICEV

¡Supera tus tareas y exámenes ahora con Quizwiz!

By what size increments does an open end wrench increase?

1/16 inch

A screw pitch

Determines number of threads per inch

"Torque" means slippage.

FALSE

Most chisels are made of

High carbon steel

A pipe wrench should not be used on nuts and bolts.

TRUE

How are countersinks sized?

According to diameter

Which of the following is an adjustable wrench designed to fit hexagonal nuts?

Adjustable wrench

Which of the following is used to shift parts so corresponding holes align?

Aligning punch

Criteria for identifying sockets include which of the following?

All of the above

Types of tap include

All of the above

Safety precautions which should be taken when using a hammer include which of the following?

B and C

A diamond point chisel is used for cutting

Big grooves

Which of the following is an advantage of a six-point socket?

Both A and C

Which of the following completely surrounds the nut or bolt head?

Box-end wrench

Which of the following is often referred to as flex-head handles or speeders?

Breaker bars

In which of the following ways is an impact driver set useful?

Breaking loose rusty fasteners

Gasket and carbon scrapers are used to scrape off which of the following from machine parts?

Carbon

Which of the following is a tool used to mark the location of a hole which is going to be drilled?

Center Punch

A combination square

Determines if something is square or at a 90 or 45 degree angle

A feeler gauge

Determines the clearance between parts

What is the trade name for a tapered screw extractor?

Ez-Out

A combination wrench has different size openings on both ends.

FALSE

A trade name for a three-jaw, plain bearing, key type drill chuck is 'Ezy-Out.'

FALSE

Ball peens are heavier than blacksmith hand hammers.

FALSE

Hacksaws should be stored in a toolbox.

FALSE

If the handles of pliers are plastic-coated, electric shock is prevented.

FALSE

It is permissible to use a hammer on a scratch awl.

FALSE

Phillips, Reed and Prince screwdrivers are interchangeable.

FALSE

Screwdrivers are the most common and least misused hand tools.

FALSE

The most common size for slip joint pliers is six inches.

FALSE

Three thread types are standard, national fine and national coarse.

FALSE

Twist drills are usually sharper than twist bits.

FALSE

Which of the following is another term for a breaker bar?

Flex-head handle

How much do ball peens weigh?

Four to 12 ounces

Where is a neoprene insert located?

In a spark plug socket

How are screwdrivers sized?

Length of blade

The edges of a flat chisel are sharpened to a

None of the above

Which of the following is an advantage of a ratchet?

Speed

Which of the following is a reamer mentioned in the production?

Spiral fluted reamer

Which of the following is NOT a type of torque wrench?

Square drive

Which of the following is used when there is not enough room for a regular screwdriver?

Standard offset screwdriver

A pin punch is used after which of the following?

Starter punch

A hacksaw blade should be installed with the teeth pointed away from the handle.

TRUE

If a twist drill is not tightened properly in the chuck it may slip and damage the drill shank.

TRUE

It is possible to determine the size of a nut driver by the color of the handle.

TRUE

Needle nose pliers are mostly used for electrical work.

TRUE

Nut drivers are sized according to the socket size on the end.

TRUE

One type of torque wrench is the one-half inch click-type ratcheting wrench.

TRUE

Twist drills diameters are sized by fractions of an inch.

TRUE

Which tool is used to turn taps?

Tap Wrench

What is an easy way to determine the size of a straight fluted screw extractor?

The size is stamped on the turn neck

When using chisels, you should always

Wear eye protection

A center punch is usually how long?

four to six inches


Conjuntos de estudio relacionados

1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20

View Set

Biology Photosynthesis and Respiration Quiz

View Set