Solid Professor (5-15)

¡Supera tus tareas y exámenes ahora con Quizwiz!

Which of the following can NOT be used as a path for the Sweep Command?

Planes

Which of the following is NOT an option in the Thread Command Window?

Diameter

What happens when the web command does not have geometry to end at?

The web can not be created

Drafts can only be applied to a 3D model when performing an extrude. True or False?

False

Only straight lines that are coincident with the edge of a 3D body can be used as a selection by the Web Command. True or False?

False

The Slide Edge Command moves the adjacent edges around the T-Spline body to adjust the geometry's contour. True or False?

True

Quad Ball command

more akin to six-sided cube that had been pulled out to form a perfect sphere and contains 8 STAR POINTS

The four Plane types are:

-Offset Plane -Plane at an angle -Tangent Plane -Midplane

How many star points does a Quad Ball have?

8

What must be selected in order to perform the Redefine Sketch Plane Command?

A Plane or 3D surface

The Point at Edge and Plane Command requires:

A plane or face to be selected along with a linear edge or sketch line

Drafts can be created in which of the following directions?

All of these are correct (Two side, One Side, and Symmetric)

Edit Form

Allows for sets of vertices, edges, and faces to be manually pushed and pulled in different directions

Redefine Sketch plane

Allows for sketches to be relocated to a new plane

Draft Command

An angle added to any planar face

The Subdivide Command

Can add a lot of detail by grouping faces and splitting them into equally spaced faces

Points

Can be added through construction geometry's when a point is not present in the model

Insert point command

Can be used to divide faces into custom shapes by selecting points on adjacent edges to create a new edge between

Measure Command

Can measure key parts of a model

Combine Command

Combines bodies together

Press and Pull

Command that allows you to access the extrude, fillet, and offset face command

Sweep Command

Creates geometry by extending a closed profile along a path

Section Analysis

Cuts through components in the model to see interior spaces in the model

Which of the following is NOT a Construction Point Command?

Cylindrical Point

Dimensions

Dimensions are applied to sketch entities to define their lengths, angles, radii, diameters, etc.

Putting related profiles on the same sketch makes it impossible to perform the Revolve command. True or False?

False

Since the "Smooth Display" mode is much less memory intensive, it is often efficient to edit the model in that mode and switch to "Box Display" for final adjustments. True or False?

False

The Loft Command can only be used between dissimilar profiles. True or False?

False

The Revolve Command is NOT able to create new components. True or False?

False

The Section Analysis Command will often end up adding/removing 3D geometry from the model. True or False?

False

The Weld Vertices Command will have the same effect on both a symmetrical body and a non-symmetrical one. True or False?

False

The mirror Command is only capable of selecting one object to mirror at a time. True or False?

False

When using Insert Edge, multiple loops can be selected for T-Spline edge selection. True or False?

False

When using the "Loft" command, Fusion 360 automatically connects all of the available sketch profiles on screen, while also influencing the direction of the lofted body. True or False?

False

When using the Delete Command to erase vertices, only the entities (including vertices and faces) completely enclosed will be selected and deleted. True or False?

False

Fillet command

Fillets are used to cut internal edges of a model or to reduce high stress concentrations along a model edge

What is the Main difference between the Fillet and Chamfer Commands?

Fillets create round edges while Chamfers create angled faces

Which of the following is NOT a Hole Type found in the Hole Command

Flat-Head

Box display

Gives up vital fidelity but reduces processing power required to generate models with many faces, so your model still retains responsiveness, good for speed

Insert Edge

Inserts edges at a specified position from the original edge

Weld Vertices

Joins two vertices together on sculpted bodies

When the "Keep Tools" option is checked, the Combine Command will...

Keep the original Tool Bodies after completing the command

Break Link to Projected Geometry

Makes the projected geometry independent from the original geometry

The modify command is very good at...

Making T-Spline bodies manageable and detailed by adding and removing faces, edges, or vertices

The Edit Form Command can perform a combination of which of the following commands

Move, Rotate, Scale

What two selections must be made in order to define what is duplicated in a Rectangular Pattern?

Objects, Directions

Scale Command

Scales up or down sketches

How would you use the Shell Command to hollow out a body without removing any faces?

Select the entire body for the Faces/Body section of the Shell Command

Vertex to midpoint

Selected vertices will be welded at the midpoint between them

Split Body Command

Separates the body's in the model

Which of the following is Not a type of Construction Plane?

Symmetric Plane

Revolve command

Takes a closed sketch profile(s) and rotates them around an axis to create a three-dimensional profile

Extrude Command

Takes an existing sketch or face and adds depth by projecting, or extruding it out linearly in order to create 3d geometry

What command can be used to copy objects around a center point?

The Circular Pattern command

Which Extrude option allows you to join two or more extruded bodies together?

The Join option

Smooth display

The default display when working with T-Spline bodies, good for details

The display mode command can be accessed from...

The toolbar, which can switch the display of the model by selecting entities on the model

Which of the following is not a Boolean operation found within the Combine Command?

Unite

Weld to Tolerance

Used as a distance check

Offset

Using the offset command is a quick and easy way to recreate and scale geometry, but it can only offset on enclosed profile at a time even if they were created from a single sketch element

Which of the following can be created when applying Primitives?

Water-tight volumes and Surface Bodies

Parameters

like mathematical variables that can edit many model geometries across a canvas

Sketch Fillet

A sketch fillet is a sketch element that is used to create a smooth transition by adding a tangent arc between 2 elements

Design Intent

Strategy where geometry is defined in such a way that changes produce desired, predictable results

Intersect

The intersect command is used to copy the models contours into the sketch where the plane cuts through the model

In order to complete a Circular Pattern, both the desired objects and an axis MUST be selected. True or False?

True

The Offset command can only be used to modify one enclosed profile at a time. True or False?

True

The Offset command is unable to create new sketch geometry, it can only create derived geometry from and existing sketch. True or False?

True

The mirror command can use a construction line as the line of symmetry. True or False?

True

Threads can only be added to cylindrical faces. True or False?

True

When analyzing a model, the Interference Detection Command can be used to identify any overlapping bodies within a model. True or False?

True

Web Command

Used to create geometry from sketch curves that intersect with pre-existing bodies

Shell Command

Used to hollow out material and create thin walls in the part - remove faces from the model

Planes

Used to place sketches in specific angles relative to the model

Vertex to Vertex

Welds the selected vertices by moving the FIRST on selected to the second

Edit form facts

-Can be accessed in the modify drop down, the right click menu, and the toolbar -Like a combination of the scale, move, and rotate command -The coordinate space defines what type of axis is used for manipulation -Object Snap allows you to snap to the closest geometry -Soft modification allows you to change the area of influence your modifications will have on the rest of the model, and, when enabled is visually represented with red and white highlighting

Threads Command

Adds simple thread types to any cylindrical face

Which of the following is NOT a Loft type demonstrated in the videos?

Sketch LOft

Trim and Extend

Used to clean up and refine the geometry without having to resketch entire sections

Slide edge

allows you to reposition and edge in a particular direction

Rib Command

Adds geometry to a model based on a single sketch element that intersect with already created geometry

Delete Vertices

Deletes vertices, very important because the shape of the body is determined by the placement of the vertices

Direct Modeling

Directly edits surfaces and faces of a design without regard for previously established relationships

Managing the Number of faces

The amount of detail in the body is directly related to how many faces the model has

The Rib command requires pre-existing geometry and can not be added alone. True or False?

True

Which of the following is NOT an acceptable object to define a direction for a Rectangular Pattern Command?

A dimension

Which of the following is a type of Construction Axis Command?

All of these are correct (Axis Perpendicular to Face at Point, Axis Through Two Planes, and Axis through Cylinder/Cone/Torus)

Yellow capped faces are the only areas where a crease can be applied. True or False?

False

What command can be used to replicate or pattern an object linearly about a sketch?

The Rectangular Pattern Command

Rectangular Pattern

The Rectangular Pattern command takes the original geometry and replicates it across the sketch with a specified spacing in a number of instances

What command can be used to correct downstream issues that can occur when deleting reference geometry?

The Redefine Sketch Plane command

Mirror

The mirror command copies and flips sketch entities across a line of symmetry and creates a relationship between the mirror and original entity

After performing a Mirror Command, the resulting geometry will automatically update if the original geometry is modified. True or False?

True

In the Measure Command, until the selection is cleared, the first selection made will always be used as the reference for the measurement. True or False?

True

Once you create a sketch using the projected geometry command, it will update to match any changes made to the original geometry. True or False?

True

The Curvature Spacing option in the extrude command produces denser T-Spline geometry along areas of high curvature, while the Uniform option spaces the T-spline vertices equally across the geometry. True or False?

True

The Extrude Command creates 3D geometry by moving a face or sketch profile along a linear path. True or False?

True

The Intersect Command creates sketch geometry that references the cross section of a model. True or False?

True

The Project Command can be accessed simply by pressing the P key on your keyboard. True or False?

True

The Shape of a Sweep feature will change if additional faces are added along the length of the path. True or False?

True

The Shell Command can remove material from multiple faces in the model. True or False?

True

The Trim Command Cuts line segments back to the nearest sketch entity. True or False?

True

To insert the Bevel edge, the bevel location uses a percentage marker between the beveled edge and the two closest edges on the other sides of the adjacent faces. True or False?

True

Unlike bodies, Sketches must be selected from the browser in order to apply the Scale Command to them. True or False?

True

Loft Command

Used to create geometry between enclosed profiles or points, and is most commonly used between dissimilar profiles, such as rectangles and circles

Hole Command

Adds holes without having to make time consuming sketches

Quad ball vs Sphere

Both create simple spheres, but they lay out the edges differently

Chamfer Command

Chamfers can be used whenever the edge of the model will be interacting with another model or component in an assembly

Which of the following options is dependent on the "Angle" option when applying the Revolve Command?

Direction

When working with T-Spline bodies, it is recommended to use the highest number of faces possible to get the exact shape, then start reducing faces to simplify the model. True or False?

False

Primitives

Starts off with simple base sketch Shapes like rectangles and circles and then it pulls it outward to give its final shape. There are many types of primitives in the create menu. primitives are often called "sculpted geometry"

Circular Pattern

The circular pattern command is used to copy the geometry around the sketch

Which of the following is NOT a type of fillet?

Variable Circumference

Bevel Edge

replaces a single edge with a specified number of adjacent edges

Axes

used to control model edges


Conjuntos de estudio relacionados

Chapter 10 - Florida Laws and Rules Pertinent to Insurance

View Set