Solid Professor Lessons 5-15 Quiz ANSWERS
Which of the following is NOT a Hole Type found in the Hole command window?
*Your Answer: Flat-Head* Counterbore Countersink Simple
The Edit Form command can perform a combination of which of the following commands?
*Your Answer: Move, Rotate, Scale* Patch, Delete, and Stitch Scale, Move, Delete Fill, Rotate, Scale
The Slide Edge command moves the adjacent edges around the T-spline body to adjust the geometry's contour.
Your Answer: True
The Trim command always cuts line segments back to the nearest sketch entity.
Your Answer: True
Which of the following is NOT a Loft type demonstrated in the videos?
*Your Answer: Sketch Loft* Vase Loft Ring Loft Tent Loft
Which of the following is NOT a type of Construction Plane?
*Your Answer: Symmetric Plane* Midplane Offset Plane Plane at Angle
Which of the following is not a Boolean operation found within the Combine command?
*Your Answer: Unite* Cut Join Intersect
Which of the following can be created when applying primitives?
*Your Answer: Water-tight volumes and Surface Bodies* Water-tight volumes Surface Bodies None of these
How many star points does a Quad Ball have?
Your Answer: 8
What is Design Intent?
Your Answer: A strategy where geometry is designed in such a way where changes produce desired predictable results
A sketch is fully defined if:
Your Answer: All sketch identities are colored black
The Mirror Command is only capable of selecting one object to mirror at a time.
Your Answer: False
How would you use the Shell command to hollow out a body without removing any faces?
Your Answer: Select the entire body for the Faces/Body section of the Shell command
Which Extrude option allows you to join two or more extruded bodies together?
Your Answer: The Join option
The Shell command can remove material from multiple faces in the model.
Your Answer: True
Threads can only be added to cylindrical faces.
Your Answer: True
In the Measure command, until the selection is cleared, the first selection made will always be used as the reference for the measurement.
Your Answer: True
Once you create a sketch using the projected geometry command, it will update to match any changes made to the original geometry.
Your Answer: True
Switching to Direct Modeling from Parametric Modeling removes all previous relationships in the timeline.
Your Answer: True
The Curvature Spacing option in the extrude command produces denser T-spline geometry along areas of high curvature, while the Uniform option spaces the T-spline vertices equally across the geometry.
Your Answer: True
Which of the following is NOT an acceptable object to define a direction for a Rectangular Pattern Command?
*Your Answer: A dimension* Sketch entity Linear edge of a model Construction Geometry
Which of the following is a type of Construction Axis command?
*Your Answer: All of these are correct* Axis Through Cylinder/Cone/Torus Axis Through Two Planes Axis Perpendicular to Face at Point
Drafts can be created in which of the following directions?
*Your Answer: All of these are correct* One-side Two-side Symmetric
Which of the following are Automatic Sketch Constraints?
*Your Answer: All of these are correct* Perpendicular Parallel Vertical
Which of the following is NOT a Construction Point command?
*Your Answer: Cylindrical Point* Point at Vertex Point Through Two Edges All of these are correct
Which of the following can NOT be used to activate the Sketch Dimension command?
*Your Answer: The S key on the keyboard* The Sketch pull down menu The Sketch marking menu The Sketch section of the right click menu
Which of the following is NOT a type of Fillet?
*Your Answer: Variable Circumference* Constant Radius Variable Radius Chord Length
Only straight lines that are coincident with the edge of a 3D body can be used as a selection by the Web command.
Your Answer: False
Putting related profiles on the same sketch makes it impossible to perform the Revolve command.
Your Answer: False
The Intersect command creates sketch geometry that references the cross section of a model.
Your Answer: True
The Mirror command can use a construction line as the line of symmetry.
Your Answer: True
Which of the following can NOT be used as a path for the Sweep Command?
*Your Answer: Planes* Splines Linear Segments Arcs
The Loft command can only be used between dissimilar profiles.
Your Answer: False
The Weld Vertices command will have the same effect on both a symmetrical body and a non-symmetrical one.
Your Answer: False
When using Insert Edge, multiple loops can be selected for T-spline edge selection.
Your Answer: False
When using the "Loft" command, Fusion 360 automatically connects all of the available sketch profiles on screen, while also influencing the direction of the lofted body.
Your Answer: False
Which of the following is a method to editing features in Fusion 360?
*Your Answer: All of these are correct* Selecting Geometry from the Timeline Selecting Geometry from the browser on the left Selecting Geometry in the Canvas
Which of the following is NOT an option in the Thread command window?
*Your Answer: Diameter* Thread Settings Faces Size
When the "Keep Tools" option is checked, the Combine command will
Your Answer: Keep the original Tool Bodies after completing the command
What two selections must be made in order to define what is duplicated in a Rectangular Pattern?
Your Answer: Objects, Directions
What command can be used to replicate or pattern an object linearly about a sketch?
Your Answer: The Rectangular Pattern Command
What is the maximum number of objects that can be created using the Circular Pattern Command?
Your Answer: There is no limit
The Offset command can only be used to modify one enclosed profile at a time.
Your Answer: True
The Offset command is unable to create new sketch geometry, it can only create derived geometry from an existing sketch.
Your Answer: True
The Project Command can be accessed simply by pressing the P key on your keyboard.
Your Answer: True
The Rib command requires pre-existing geometry and can not be added alone.
Your Answer: True
The Shape of a Sweep feature will change if additional faces are added along the length of the path.
Your Answer: True
To insert the Bevel edge, the bevel location uses a percentage marker between the beveled edge and the two closest edges on the other sides of the adjacent faces.
Your Answer: True
Unlike bodies, Sketches must be selected from the browser in order to apply the Scale command to them.
Your Answer: True
When analysing a model, the Interference Detection command can be used to identify any overlapping bodies within a model.
Your Answer: True
You can use equations and parameters in dimensions in order to better control model geometry.
Your Answer: True
What command can be used to correct downstream issues that can occur when deleting reference geometry?
Your Answer: The Redefine Sketch Plane Command
Sketch constraints can be accessed from:
Your Answer: The Sketch Pallette
If a sketch is fully defined:
Your Answer: The sketch will produce 100% predictable results
What happens when the web command does not have geometry to end at?
Your Answer: The web can not be created
What is the maximum number of constraints that can be applied to an arc?
Your Answer: There is no maximum
After performing a Mirror Command, the resulting geometry will automatically update if the original geometry is modified.
Your Answer: True
All features created with the Press Pull Command are displayed in the command tree as if they were made using the appropriate tools.
Your Answer: True
Every time a dimension is created, a default Parameter is also generated and can be used in all future dimensions.
Your Answer: True
In order to complete a Circular Pattern, both the desired objects and an axis MUST be selected.
Your Answer: True
The Extrude Command creates 3D geometry by moving a face or sketch profile along a linear path.
Your Answer: True
The Extrude, Fillet, Offset Face Commands can all be accessed through the Press Pull Command.
Your Answer: True
What command can be used to copy objects around a center point?
Your Answer: The Circular Pattern command
What must be selected in order to perform the Redefine Sketch Plane command?
Your Answer: A Plane or 3D surface
How can you identify a driven dimension?
Your Answer: A driven dimension has parenthesis around its value
The Point at Edge and Plane Command requires:
Your Answer: A plane or face to be selected along with a linear edge or sketch line
Since the "Smooth Display" mode is much less memory intensive, it is often more efficient to edit the model in that mode and switch to "Box Display" for final adjustments.
Your Answer: False
The Revolve Command is NOT able to create new components.
Your Answer: False
The Section Analysis command will often end up adding/removing 3D geometry from the model.
Your Answer: False
When using the Delete command to erase vertices, only the entities (including vertices and faces) completely enclosed will be selected and deleted.
Your Answer: False
When working with T-spline bodies, it is recommended to use the highest number of faces possible to get the exact shape, then start reducing faces to simplify the model.
Your Answer: False
What is the main difference between the Fillet and Chamfer commands?
Your Answer: Fillets create round edges while Chamfers create angled faces
Which of the following options is dependent on the "Angle" option when applying the Revolve command?
*Your Answer: Direction* Symmetry Axis Type
Drafts can only be applied to a 3D model when performing an extrude.
Your Answer: False
