Wireless Networking Quiz

Which of the following is a channel bandwidth used in 802.11b networks? 20 MHz 22 MHz 40 MHz 80 MHz

22 MHz

The IEEE 802.11g standard is backwards compatible with: 802.11n 802.11a 802.11b 802.11ac

802.11b

The IEEE 802.11n standard offers backward compatibility with: (Select all that apply) 802.11g 802.11ac 802.11b 802.11a

802.11g 802.11b 802.11a

A wireless network Access Point (AP) or site offering public wireless Internet access is commonly called a: Hotspot Proxy Hub Gateway

Hotspot

Which of the following IEEE standards provides the basis for implementing most modern WLANs? IEEE 802.11 IEEE 802.1x IEEE 802.3 IEEE 802.1q

IEEE 802.11

Which type of technology enables contactless payment transactions? NFC SDN PED WAP

NFC

The term "Airplane mode" refers to a device function that allows a user to disable wireless transmission capability. True False

True

The term "Channel bonding" refers to a technique that allows for combining adjacent channels to increase the amount of available bandwidth. True False

True

Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA) are encryption standards designed for securing wireless networks. WEP is an older standard and is not recommended because of its vulnerabilities. WPA was designed as an interim replacement for WEP, and WPA2 was introduced as the official standard that offers the strongest security of the three. True False

True

Which of the following wireless security protocols has been discouraged in favor of newer standards due to known vulnerabilities resulting from implementation flaws? EAP AES WPA2 WEP

WEP

Which wireless network type has a design that uses mesh topology? MAN WMN VLAN WAN

WMN A wireless mesh network is a communications network made up of radio nodes organized in a mesh topology.

Which of the following is the best method to secure a small network lacking an authentication server? WPA-PSK WPA2-Enterprise WPA2-PSK WPA-Enterprise

WPA2-PSK

The process of establishing a connection between Bluetooth devices (e.g. between a Bluetooth enabled headset and a Bluetooth-enabled phone) is known as: Linking Tethering Three-way handshake Pairing

Pairing

Which of the following best describes the disabling of an SSID broadcast? - It is one of the measures used in the process of securing wireless networks - It makes a WLAN harder to discover - It blocks access to a WAP - It prevents wireless clients from accessing the network

- It makes a WLAN harder to discover

What is the channel bandwidth specified in the IEEE 802.11a standard? 20 MHz 22 MHz 40 MHz 80 MHz

20 MHz

Which of the following channel bandwidths is specified in the IEEE 802.11g standard? 20 MHz 22 MHz 40 MHz 80 MHz

20 MHz

The IEEE 802.11n standard specifies available channel bandwidth options of: (Select 2 answers) 20 MHz 22 MHz 40 MHz 80 MHz 160 MHz

20 MHz 40 MHz

Which of the following are ways of creating a wireless/cellular data network by using a mobile device? (Select 3 answers) Hotspot Channel bonding Tethering Link aggregation Bluetooth

Hotspot Tethering Bluetooth

Long Term Evolution (LTE) is a wireless communications standard for mobile devices and wireless hotspots. LTE is much faster than the older generation of 2G and 3G cellular networks. Both LTE and its later upgrade, LTE-Advanced (LTE-A), are often marketed as 4G standards. True False

True

Wi-Fi Protected Setup (WPS) simplifies the configuration of new wireless networks by enabling non-technical users to easily set up new networks, configure network security settings and add new devices to an existing network. However, due to its known security vulnerabilities, WPS is not recommended and should be disabled. True False

True

Which of the following WAN technologies uses cell towers that provide wireless signal coverage for mobile devices? WAP WWAN Satellite WLAN

WWAN

What are the characteristic features of a WPA/WPA2 Enterprise mode? (Select 2 answers) - Suitable for large corporate networks - Does not require an authentication server - Suitable for all types of wireless LANs - Requires RADIUS authentication server

- Suitable for large corporate networks - Requires RADIUS authentication server

Multiple Input / Multiple Output (MIMO) is a wireless technology that allows for significant increase in data throughput due to the use of multiple antennas and multiple data streams. True False

True

Which of the following answers describe features of the IEEE 802.11ac wireless standard? (Select 3 answers) - Multiple Input / Multiple Output (MIMO) - Data signaling rate of up to 600 Mbps - 5.0 GHz frequency band - Maximum data signaling rate of up to 6.77 Gbps - Multi-User Multiple Input / Multiple Output (MU-MIMO) - 2.4 GHz frequency band

- 5.0 GHz frequency band - Maximum data signaling rate of up to 6.77 Gbps - Multi-User Multiple Input / Multiple Output (MU-MIMO)

What are characteristic features of satellite Internet connections? (Select 3 answers) - High signal latency - Lack of signal interference - Cheaper in comparison to terrestrial links - Interference (weather dependent) - Low signal latency - Relatively high cost in comparison to terrestrial links

- High signal latency - Interference (weather dependent) - Relatively high cost in comparison to terrestrial links

What are the characteristic features of the IEEE 802.11b wireless standard? (Select 2 answers) - Maximum data signaling rate of 11 Mbps - 2.0 GHz frequency range - Maximum data signaling rate of 54 Mbps - 5.0 GHz frequency range - Maximum data signaling rate of up to 600 Mbps - 2.4 GHz frequency range

- Maximum data signaling rate of 11 Mbps - 2.4 GHz frequency range

Which of the following answers apply to the IEEE 802.11g wireless standard? (Select 2 answers) - Maximum data signaling rate of up to 600 Mbps - 5.4 GHz frequency band - Maximum data signaling rate of 54 Mbps - 2.4 GHz frequency range - Maximum data signaling rate of 11 Mbps - 5.0 GHz frequency range

- Maximum data signaling rate of 54 Mbps - 2.4 GHz frequency range

Which of the following answers apply to the IEEE 802.11a wireless standard? (Select 2 answers) - 2.4 GHz frequency band - Maximum data signaling rate of 54 Mbps - 5.0 GHz frequency band - Maximum data signaling rate of up to 600 Mbps - 5.4 GHz frequency band - Maximum data signaling rate of 11 Mbps

- Maximum data signaling rate of 54 Mbps - 5.0 GHz frequency band

Which of the following are characteristic features of the IEEE 802.11n wireless standard? (Select all that apply) - Multiple Input / Multiple Output (MIMO) - Maximum data signaling rate of 54 Mbps - 2.4 GHz frequency band - Multi-User Multiple Input / Multiple Output (MU-MIMO) - 5.0 GHz frequency band - Maximum data signaling rate of up to 600 Mbps

- Multiple Input / Multiple Output (MIMO) - 2.4 GHz frequency band - 5.0 GHz frequency band - Maximum data signaling rate of up to 600 Mbps

Which of the following channel options would allow three Wireless Access Points (WAPs) to be set up on non-overlapping channels? 1 5 6 9 11

1 6 11

Which of the following frequency bands can be used by IEEE 802.11 networks? (Select all that apply) 2.0 GHz 2.4 GHz 5.0 GHz 5.4 GHz

2.4 GHz 5.0 GHz

Which of the following describes the IEEE 802.11ac channel bandwidth option(s)? 20 MHz 40 MHz 80 MHz 160 MHz Any of the above

Any of the above

A popular, short-range wireless technology used for connecting various personal devices in a WPAN is known as: 802.11 NFC Bluetooth Z-Wave

Bluetooth

Which of the following is a short distance, line-of-sight technology used in products such as home remote controls? NFC 802.3 IR Z-Wave

IR

Which of the following is a security feature used in Bluetooth device pairing? PIN code Multifactor authentication Biometrics Cleartext credentials

PIN code

Which of the following wireless technologies enables identification and tracking of tags attached to objects? WMN RFID GPS WTLS

RFID

Which of the following refers to the capability of a mobile device to share its Internet connection with other devices? Pairing Clustering Tethering Bonding

Tethering

Setting up a wireless network to operate on a non-overlapping channel allows multiple networks to coexist in the same area without causing interference. True False

True

Which of the following is a long-distance line-of-sight Internet service? WiMAX IEEE 802.11 IR Bluetooth

WiMAX Wifi and WiMax are used to create wireless network connections. Wifi is used to create small networks and used to connect printers, conmputers, gaming consoles. WiMax uses spectrum to deliver connection to network. WiMax is used to provide internet services such as Mobile Data and hotspots

Which of the following refer to IoT technologies designed to permit communication between appliances in a home automation network? (Select 2 answers) Ant+ RFID Z-Wave NFC Zigbee

Z-Wave Zigbee