6.1 HAAS CONTROL KEYPAD & SCREEN - BASIC MILL OPERATOR
When you have chosen the Handle Jog button, the suggested button (increment) for axis movement is:
0.001
The Reset key does the following:
Clears alarms, clears text, and resets the control for machine operation
The Operator can use the keys in the Spindle and Axis Override Section whenever he/she wants.
False
The first button to review in the Display section is the Program Button. This button shows the operator:
Information related to the Active Program that is loaded into Memory, and visible in the upper left side of the control window
The Offset button ___________?
Opens a window that contains your work and tool offsets in the control screen
One of the tool release buttons is located on the control keypad. The other tool release button is located:
Right above the spindle and coolant line, on the spindle head cover
Any time you have pressed the E-Stop button, you will need to rotate it clockwise to disengage it, and then press Reset to exit the E-Stop state and reset the machine.
True
If the machine gets interrupted during a tool change, the machine cannot run until the tool change is completed. Pressing the Recover key allows the machine to complete the tool change, and return the tool changer to Home position.
True
The 4 keys to the right of the Mode keys control what you can do within each of the Mode keys.
True
The Display and Mode section of the control keypad is what you see in the upper two quadrants of the display screen on the control.
True
The Haas Control is the computer system that runs the Haas machine.
True
The last quadrant of the Control Keypad discussed in the video was the Override Section.This section is important for both the Operator and the setup person.
True
The speed of the axis movement when using the Jog Lock key is controlled by the last increment key that was pressed in the Hand Jog Mode section.
True
When you start the machine, pressing the Power Up key does what?
Zero returns the axes and gets the control ready to go
