Advanced PLCs Test 1: Module 1-3

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

The binary numbering system is a base 2 numbering system that includes two symbols, 0 and _____.

1

The 1769-L16ER controller's USB port is USB ___ compatible and operates at 12 Mbps.

2.0

Ethernet/IP uses the ___ (protocol) to produce a network suitable for use on automation and control level.

CIP

The _____ pushbutton changes the terminal's display to another assigned display when operated.

Goto Screen

_____ displays networks and devices in a similar manner to Windows Explorer.

RS Who

A(n) __________ network is a high speed communications connection used to exchange data between production line equipment and other devices within a manufacturing facility.

industrial

In the module tag Local:1:I.Data, Local refers to the module's _____.

location

Two main areas of a CompactLogix processor's _____ are Tasks and Tags.

memory

A PLC and PC are connected in a(n) ______________ network using a single Ethernet cable.

point-to-point

A PLC requires much less _____ than a hard wired relay panel that could do the same job.

space

All PLCs must have a(n) ______________________ to operate.

user developed project

_____ is the default communications option for a PanelView Plus terminal.

Ethernet

In a PLC program, arranging two XIC instructions in series is an example of a(n) _____ logic element.

AND

PanelView Plus terminals provide a(n) _____ mode used for configuring terminal and application settings.

Configuration

________ is an embedded operating system that controls how microprocessor-controlled hardware devices operate.

Firmware

The six basic components of most PLCs are the power supply, the input and output modules, the processors module, the programming device, and the ___________.

I/O chassis

Two addresses are used for Ethernet communications: Media Access Control (MAC) and ______________________.

Internet Protocol (IP)

The basic operation of a(n) ___ is to scan instructions, monitor the status of input devices, and produce outputs based on which inputs are on or off.

PLC

Allen-Bradley _____ operator interface terminals are programmable operator stations that enable interaction between users and a PLC controlled system or process.

PanelView Plus

The IP address of a CompactLogix PLC that already has an IP address is viewed and edited using ______ communications software.

RSLinx

PLCs provide a means of controlling machines and other industrial application with a(n) ___________________ instead of using hard wired devices.

industrial computer

A() _______ is a file that contains a hardware configuration and control program.

project

The four languages used to program a CompactLogix PLC are sequential function chart, _____, function block diagram, and ladder logic.

structured text

Objects contained in the PanelView's displays are configured to exchange data with specified PLC memory locations having names, or _____.

tags

Tags are _____ names given to PLC memory locations used to store information.

text-based

_____ objects can be momentary, maintained, latched, or multistate and are operated by touching the object on a touch screen terminal.

Pushbutton

A problem with identifying a controller's firmware revision by examining the hardware's _____________ is that it is often inaccessible once installed.

catalog label

When voltage is applied to input terminal Local:1:I.Data.0 of a PLC, a programmed XIC instruction with the same address will _____.

close

PanelView Plus applications are created in _____ using graphics and tags.

FactoryTalk View Studio

_____ tags are 1-bit memory locations used to store the status of a device or instruction.

Boolean

The base of the decimal numbering system is _____.

10

The three network levels are Enterprise, Automation and _______, and Field Device.

Control

_______ are software programs that allow a device to connect to a network and communicate with other devices.

Drivers

The _____ instruction of a ladder logic network operates in a similar manner to a hard-wired output device.

OTE

_____ objects display information on the PanelView plus display that notifies the operator about the status of the machine or process.

Output

A(n) __ is used to download hardware configurations and programs to a PLC.

PC

_____ objects appear on the PanelView's display but do not interact with a PLC's data tags.

Static

__________ is a network search utility that shows the layout of every network that has a driver configured in RSLinx.

Who Acitve

PLC input/output diagrams are used to show the specific physical connections between the _____ and the PLC I/O terminals.

device

_______________ uses several protocols to convert data from its native format, such as a text message, into a format that can be sent and tracked from the source node to the destination node of a network.

Ethernet TCP/IP

_____ are named according to their location, slot, and data type.

Module-defined tags

Five types of numbering systems are decimal, binary, BCD, octal, and _____.

hexadecimal


Kaugnay na mga set ng pag-aaral

Set Theory Symbols & Definitions

View Set

321 final - ch42: mngt of pts w musculoskeletal trauma

View Set

Econ Chapter 1-7 In-Class Problems

View Set

Western Civilization II Chapter 14 - Dr. Puckett

View Set

Chapter 32: Assessment of Hematologic Function and Treatment Modalities

View Set