Advanced solidworks parts
What is the minimum number of sketches needed to create the loft shown in the image?
2
When the Property Manager appears after clicking the Boundary feature, how many selection windows let you specify the boundaries of the boss?
2
How many clicks does it take to complete a Parabola sketch?
4
What type of geometry can be used to create lofts: (A) sketches, (B) surfaces, (C) model faces, or (D) points.
A, B, C, and D
Which of the following geometry can be intersected?
All of the Above
3D Sketching can be useful if designing things such as ____________.
All of the above
In order to change the appearance of the side faces on a Loft, you can apply constraints to ____________
All of the above
In order to change the appearance of the side faces on a Loft, you can apply constraints to ______________.
All of the above
Which of these options is available in the Ellipse drop-down menu?
All of the above
Where are Spline Handles found on a spline?
At every control point and every endpoint.
he Projected Curve feature has 2 options, which of the following pairs is correct? A) Sketch on Faces B) Sketch on Edge C) Sketch on Sketch D) Sketch on Point
Both A and C Both C and D Both A and B Both B and D
When a sweep or other basic tools are unable to create a smooth transition between separate bodies, what feature should be used instead?
Boundary
Which of the following features would be the best to use in order to create solid bodies from enclosed cavities?
Boundary feature Sweep feature Intersect feature Extruded Cut feature
If you are modeling a rod, pipe or tubing, which sweep option would be the easiest to use?
Circular Profile
You can view the curvature of a curved sketch entity by showing ____________
Curvature Comb
What type of curve is defined by existing points (sketch points, endpoints, vertexes...etc.)?
Curve Through Reference Points
Which of the following curve features easily allows you to manually enter data points, as well as import them from an ASCII file?
Curve through XYZ Points
Which SOLIDWORKS command should you use to transform Solid A to Solid B?
Cut with Surface
A Reference Plane within a 3D sketch can be defined by __________.
Dimensions and relations
Each curve in a boundary feature has ________ influence over the final shape.
Equal
When using the Indent Feature, you can use a Surface Body OR Solid Body as the tool body region.
False or True
Curvature Continuous fillets allow for surfaces to ________________.
Have a gradual change in curvature
Which of the following is NOT a parameter of the Wrap feature?
Offset
Which of the following sketch tools does not require one or more existing sketch entities?
Partial Ellipse
. When creating a sweep, a ____ is necessary, which can include 2D sketches, existing model edges, and curves.
Path
Control Points for Variable Radius Fillets can be adjusted by the Radius and ______ settings.
Percentage
A basic Sweep feature requires a ____________.
Profile and a Path
Multibody Exploded views are helpful for ________
Seeing how things fit together
Multibody Exploded views are helpful for _________.
Seeing how things fit together
Which sketch tool was used to create the curve shown in the image?
Spline
How do Style Splines differ from standard splines?
Style Splines do not have spline points or spline handles
A body or tool is consumed after which process of the Combine feature?
Subtract
Which of the following is a trim tool used to split a part?
Surfaces
Autotrace allows you to __________________.
Take a sketch picture and trace that image.
How can you tell if you are sketching on a different sketch plane?
The coordinate triad has changed its position to represent the position of the plane you are sketching on.
What is one of the easiest and most useful ways to use a Conic sketch?
To attach two endpoints to a curve.
When the Target Body and The Tool Body intersect, what is created?
Tool Body Regions
After selecting the profile sketches of a loft, dragging the green connectors will:
Twist the loft feature
When do the Curves Influence selection boxes appear?
When both Direction 1 and 2 are in use
The Elliptical Dome feature is only available for
a.Conical and Rectangular models b.Square and Rectangular models d.Cylindrical and Conical models
In order to combine two separate solid bodies into one, you must use which of the following Combine feature options?
add
Which icon should you select to create a lofted cut?
cube with a lofted cut in the middle
If there are two bodies touching with no space in between them, they will automatically be merged together as one body.
false
Setback Parameters can only be applied to Variable Radius Fillets.
false
The Move/Copy feature can be substituted when assembling components.
false
To create a Center Line Loft, the center line must intersect each profile and connect points from each profile together.
false
When using the Boundary Cut feature only a single curve can be chosen to be removed at a time.
false
You can only use the Split Entities tool to delete sections of sketch entities from the graphics window.
false
When creating a 3D sketch, what button on the keyboard is used to change the active orientation or sketch plane?
tab
A sweep is composed of a profile and a path.
true
Changes made to the original sketch will also be made to the derived sketch .
true
Fillets, Chamfers, Draft and Shell features can only be applied to one solid body at a time.
true
The Loft Feature allows you to change the cross-sectional shape of the solid.
true
