Architecture Final

In general, a CADD monitor should be at least ___ in size

17"

The most popular kitchen design is the ____ kitchen

U-shaped

The L-shaped kitchen is located along two ____ walls

adjacent

To be handicapped accessible, a garage or carport should be a minimum of ____ long

24'

An average-size living room is about _____ square feet

250

Most water closets require a space at least ____ wide for installation

30"

Standard bathroom vanity base unit sizes are 21" deep by ____ high

30"

At least _____ clearance should be provided on all sides of the island in an island kitchen

4'

Plywood and paneling are produced in sheets that are generally ___ in size

4' X 8'

To accommodate a person using a wheelchair, a space of ____ wide should be provided around furniture

4' to 5'

A traditional drafting device that allows the drafter to draw a line at any angle is a(n)....

Adjustable Triangle

Plan drawings that are drawn for each side of the structure to show exterior features are called....

Elevations

The ____ functions as a place to greet guests and removed overcoats and overshoes

Foyer

The front view of an object in mechanical drawing is the same as the ___ elevation in architectural drawing

Front

The most common input device is a ____

Keyboard

The ____ is the device that transmits data from the CPU to the monitor

Video Card

List three reasons why the peninsula kitchen is popular

Provides plenty of workspace, it is attractive, and can easily join with the dining area using the peninsula as a divider.

In which area does CADD drawing provide true time savings?

Revising drawings

Usually about ____ of the house is dedicated to the sleeping area

1/3

For wheelchair access to a bathtub, the bathtub rims should not be lower than _____ from the floor

18"

A garage designed for two cars may be as small as _____

20' X 20'

The minimum depth of a clothes closet is _____

24"

The most common size bathtub is _____

30" X 60"

The following are examples of special-purpose rooms

Atrium, greenhouse, ham radio room

The ____ is used to draw circles and arcs

Compass

The acronym CADD stands for ____

Computer-Aided Drafting and Design

A _____ receptacle should be used in the bathroom

Ground Fault Circuit Interrupter

List four rooms of the home that are included in the service area

Kitchen, Clothes care center, garage or carport, and utility and storage.

The ____ is where the family relaxes, entertains guests, dines, and meet together

Living area

In a split bedroom plan, the ____ is separated from the remaining bedrooms for additional privacy

Master Bedroom

A ____ is an example of an output device used by a CADD system

Monitor

The ___ provides visual feedback on what the computer is doing and what are you are doing with the computer

Monitor

The _____ normally determines the number of bedrooms a house will have

Size of the family

A 5' X 8' bath would be considered a(n) _____ bath

Small

List the six basic styles of kitchens

Straight-line, L-shaped, Corridor, U-shaped, peninsula, and Island Kitchen.

Generally, _____ homes have the most sales potential

Three-bedroom

A __ search should be instituted before purchasing a lot to determine if there are any legal claims against the property

Title

A 1/2 bath is one that usually has only a _____

Water closet and lavatory

The Federal Housing Administration recommends _____ square feet as the minimum size for a bedroom

100

A small dining room capable of seating four people around a table and providing space for a buffet would require about ____ square feet of space

120

For practical kitchen design, the length of the work triangle should not exceed ____

22'

Exterior walls of residential structures should be modular lengths in multiples of ___ feet.

4 or 2

The floor of a garage or carport should be at least ____ thick concrete reinforced with steel or wire mesh

4"

A house with the overall dimensions ___ would be more economical to build than one that did not apply modular principles.

40' X 60'

The usual height of an interior door is ____

6'-8'

Corner lots generally have higher___ because the length of frontage is longer than that for a typical lot.

Assessments

The _____ entry should be centrally located to provide easy access to various parts of the house

Main

The size of a standard architectural drawing C-size sheet is.....

17' X 22'

Devices such as plotters, printers, and monitors are called ____ devices

Output

List six functions performed in the clothes care center

Proves an area for washing, drying, pressing, folding, storing, and mending clothes