Architecture Final
In general, a CADD monitor should be at least ___ in size
17"
The most popular kitchen design is the ____ kitchen
U-shaped
The L-shaped kitchen is located along two ____ walls
adjacent
To be handicapped accessible, a garage or carport should be a minimum of ____ long
24'
An average-size living room is about _____ square feet
250
Most water closets require a space at least ____ wide for installation
30"
Standard bathroom vanity base unit sizes are 21" deep by ____ high
30"
At least _____ clearance should be provided on all sides of the island in an island kitchen
4'
Plywood and paneling are produced in sheets that are generally ___ in size
4' X 8'
To accommodate a person using a wheelchair, a space of ____ wide should be provided around furniture
4' to 5'
A traditional drafting device that allows the drafter to draw a line at any angle is a(n)....
Adjustable Triangle
Plan drawings that are drawn for each side of the structure to show exterior features are called....
Elevations
The ____ functions as a place to greet guests and removed overcoats and overshoes
Foyer
The front view of an object in mechanical drawing is the same as the ___ elevation in architectural drawing
Front
The most common input device is a ____
Keyboard
The ____ is the device that transmits data from the CPU to the monitor
Video Card
List three reasons why the peninsula kitchen is popular
Provides plenty of workspace, it is attractive, and can easily join with the dining area using the peninsula as a divider.
In which area does CADD drawing provide true time savings?
Revising drawings
Usually about ____ of the house is dedicated to the sleeping area
1/3
For wheelchair access to a bathtub, the bathtub rims should not be lower than _____ from the floor
18"
A garage designed for two cars may be as small as _____
20' X 20'
The minimum depth of a clothes closet is _____
24"
The most common size bathtub is _____
30" X 60"
The following are examples of special-purpose rooms
Atrium, greenhouse, ham radio room
The ____ is used to draw circles and arcs
Compass
The acronym CADD stands for ____
Computer-Aided Drafting and Design
A _____ receptacle should be used in the bathroom
Ground Fault Circuit Interrupter
List four rooms of the home that are included in the service area
Kitchen, Clothes care center, garage or carport, and utility and storage.
The ____ is where the family relaxes, entertains guests, dines, and meet together
Living area
In a split bedroom plan, the ____ is separated from the remaining bedrooms for additional privacy
Master Bedroom
A ____ is an example of an output device used by a CADD system
Monitor
The ___ provides visual feedback on what the computer is doing and what are you are doing with the computer
Monitor
The _____ normally determines the number of bedrooms a house will have
Size of the family
A 5' X 8' bath would be considered a(n) _____ bath
Small
List the six basic styles of kitchens
Straight-line, L-shaped, Corridor, U-shaped, peninsula, and Island Kitchen.
Generally, _____ homes have the most sales potential
Three-bedroom
A __ search should be instituted before purchasing a lot to determine if there are any legal claims against the property
Title
A 1/2 bath is one that usually has only a _____
Water closet and lavatory
The Federal Housing Administration recommends _____ square feet as the minimum size for a bedroom
100
A small dining room capable of seating four people around a table and providing space for a buffet would require about ____ square feet of space
120
For practical kitchen design, the length of the work triangle should not exceed ____
22'
Exterior walls of residential structures should be modular lengths in multiples of ___ feet.
4 or 2
The floor of a garage or carport should be at least ____ thick concrete reinforced with steel or wire mesh
4"
A house with the overall dimensions ___ would be more economical to build than one that did not apply modular principles.
40' X 60'
The usual height of an interior door is ____
6'-8'
Corner lots generally have higher___ because the length of frontage is longer than that for a typical lot.
Assessments
The _____ entry should be centrally located to provide easy access to various parts of the house
Main
The size of a standard architectural drawing C-size sheet is.....
17' X 22'
Devices such as plotters, printers, and monitors are called ____ devices
Output
List six functions performed in the clothes care center
Proves an area for washing, drying, pressing, folding, storing, and mending clothes