CCNA 7
Directed Broadcast
A message is sent to all hosts on a remote network. Which type of message is it?
value TTL zero
A user is executing a tracert to a remote device. At what point would a router, which is in the path to the destination device, stop forwarding the packet? when the __________ in the _______ field reaches __________
staleless DHCPv6
An administrator wants to configure hosts to automatically assign IPv6 addresses to themselves by the use of Router Advertisement messages, but also to obtain the DNS server address from a DHCPv6 server. Which address assignment method should be configured?
11101000
Binary equivalent of decimal number 232
63
Decimal equivalent of 0x3F
149
Decimal equivalent of binary number 10010101
32
How many bits are in an IPV4 Address?
loopback link-local
What are two types of IPV6 unicast address?
Host Address
What does the IP Address 172.17.4.250/24 represent?
Hop Limit Field
What field content is used by ICMP6 to determine that a packet has expired?
IP host
What is indicated by a successful ping to the ::1 IPV6 address? ____ is properly installed on the __________
feedback transmissions
What is the purpose of ICMP messages? to provide ___________ of IP packet ________________
subnet host
What is the purpose of the subnet mask in conjunction with an IP address? to determine the __________ to which the ________ belongs
255.255.240.0
What subnet mask is represented by the slash notation /20?
link-local
What type of address is automatically assigned to an interface when IPV6 is enabled on that interface?
3FFE : 1044 : 0 : 0 : AB :: 57
Which of thses addresses is the shortest abbreviation for the IP address: 3FFE : 1044 : 0000 : 0000 : 00AB : 0000 : 0000 : 0057?
ICMPv6
Which protocol supports Stateless Address Autoconfiguration for dynamic assignment of IPV6 addresses to a host
10.1.1.1 172.16.4.4 192.168.5.5
Which three IP Addresses are private?
dual stack tunneling
Which two IPV4 to IPV6 transition techniques manage the interconnection of IPV6 domains?
Network Portion Host Portion
Which two parts are components of an IPV4 Address?
time destination source device
Which two things can be determined by using the ping command? the average ______ it takes a packet to reach the _______________ and for the response to return to the __________ the destination ___________ is reachable through the network