Chapter 22

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

The three basic types of sawing, according to type of blade motion involved, are (a) abrasive cutoff, (b) bandsawing, (c) circular sawing, (d) contouring, (e) friction sawing, (f) hacksawing, and (g) slotting?

(b), (c), and (f).

What is meant by the designation 12 x 36 inch lathe?

A 12 x 36 lathe has a 12 inch swing (maximum work diameter that can be accommodated) and a 36 inch distance between centers (indicating the maximum work length that can be held between centers).

What is a blind hole?

A blind hole does not exit the work; by comparison, a through hole exits the opposite side of the workpart.

What is a gang-drilling machine?

A gang drilling machine consist of two or more common drilling machines mounted on a common base or table. Each machine is setup to perform a different operation on a part. The operator can move down the line performing each operation in succession.

What is a machining center?

A machining center is a CNC machine tool capable of performing multiple types of cutting operations involving rotating spindles (e.g., milling, drilling); the machine is typically equipped with automatic tool-changing, pallet shuttles to speed workpart changing, and automatic workpart positioning.

Identify the three basic forms of sawing operation?

The three forms of sawing are: (1) hacksawing, (2) bandsawing, and (3) circular sawing.

List the three parts of a common twist drill.

The three parts of a common twist drill are the: 1) shank, 2) flutes, and 3) point.

What is the purpose of a tombstone that is used with a horizontal machining center (HMC)?

The tombstone is a multi-sided work holding device (often rectangular) that rotates into position for machining to occur. Parts are clamped to each of the sides of the tombstone. The tombstone rotates the next part towards the spindle before the cycle starts.

Give two examples of machining operations in which generating and forming are combined to create workpart geometry.

The two examples given in the text are thread cutting on a lathe and slot milling.

How does a universal milling machine differ from a conventional knee-and-column machine?

The universal milling machine has a worktable that can be rotated about a vertical axis to present the part at any specified angle to the cutter spindle.

End milling is most similar to which one of the following: (a) face milling, (b) peripheral milling, (c) plain milling, or (d) slab milling?

(a).

The twist drill is the most common type of drill bit: (a) true or (b) false?

(a).

Which one of the following cutting tools cannot be used on a turret lathe: (a) broach, (b) cutoff tool, (c) drill bit, (d) single-point turning tool, or (e) threading tool?

(a).

A lathe can be used to perform which of the following machining operations (three correct answers): (a) boring, (b) broaching, (c) drilling, (d) milling, (e) planing, and (f) turning?

(a), (c), and (f).

Knurling is performed on a lathe, but it is not a metal cutting operation: (a) true or (b) false?

(a). It is a metal forming operation.

Which of the following are examples of generating the workpart geometry in machining, as opposed to forming the geometry (two best answers): (a) broaching, (b) contour turning, (c) drilling, (d) profile milling, and (e) thread cutting?

(b) and (d).

Reaming is used for which of the following functions (three correct answers): (a) accurately locate a hole position, (b) enlarge a drilled hole, (c) improve surface finish on a hole, (d) improve tolerance on hole diameter, and (e) provide an internal thread?

(b), (c), and (d).

A broaching operation is best described by which one of the following: (a) a rotating tool moves past a stationary workpart, (b) a tool with multiple teeth moves linearly past a stationary workpart, (c) a workpart is fed past a rotating cutting tool, or (d) a workpart moves linearly past a stationary single-point tool?

(b).

A facing operation is normally performed on which one of the following machine tools: (a) drill press, (b) lathe, (c) milling machine, (d) planer, or (e) shaper?

(b).

Gear hobbing is a special form of which one of the following machining operations: (a) grinding, (b) milling, (c) planing, (d) shaping, or (e) turning?

(b).

In a turning operation, the change in diameter of the workpart is equal to which one of the following: (a) 1 x depth of cut, (b) 2 x depth of cut, (c) 1 x feed, or (d) 2 x feed?

(b).

The basic milling machine is which one of the following: (a) bed type, (b) knee-and-column, (c) profiling mill, (d) ram mill, or (e) universal milling machine?

(b).

Which one of the following turning machines permits very long bar stock to be used: (a) chucking machine, (b) engine lathe, (c) screw machine, (d) speed lathe, or (e) turret lathe?

(c).

A planing operation is best described by which one of the following: (a) a single-point tool moves linearly past a stationary workpart, (b) a tool with multiple teeth moves linearly past a stationary workpart, (c) a workpart is fed linearly past a rotating cutting tool, or (d) a workpart moves linearly past a single-point tool?

(d).

A tap is a cutting tool used to create which one of the following geometries: (a) external threads, (b) flat planar surfaces, (c) holes used in beer kegs, (d) internal threads, or (e) square holes?

(d).

What is the difference between a live center and a dead center, when these terms are used in the context of workholding in a lathe?

A center holds the work during rotation at the tailstock end of the lathe. A live center is mounted in bearings and rotates with the work, while a dead center does not rotate - the work rotates about it.

What is the difference between a machining center and a turning center?

A machining center is generally confined to rotating spindle operations (e.g., milling, drilling); while a turning center performs turning type operations, generally with single-point tools.

What is the distinguishing feature of a radial drill press?

A radial drill has a long radial arm along which the drill head can be positioned to allow the drilling of large work parts. The radial arm can also be swiveled about the column to drill parts on either side of the worktable.

How does a boring operation differ from a turning operation?

Boring produces an internal cylindrical shape from an existing hole, while turning produces an external cylindrical shape.

What is the difference between threading and tapping?

A threading operation is performed on a turning machine and produces an external thread, while tapping is normally performed on a drilling machine and produces an internal thread.

How does a turret lathe differ from an engine lathe?

A turret lathe has a toolholding turret in place of a tailstock; the tools in the turret can be brought to work to perform multiple cutting operations on the work without the need to change tools as in operating a conventional engine lathe.

Distinguish between generating and forming when machining workpart geometries.

Generating refers to the creation of work geometry due to the feed trajectory of the cutting tool; examples include straight turning, taper turning, and profile milling. Forming involves the creation of work geometry due to the shape of the cutting tool; common examples include form turning and drilling.

What is the difference between peripheral milling and face milling?

In peripheral milling, cutting is accomplished by the peripheral teeth of the milling cutter and the tool axis is parallel to the work surface; in face milling, cutting is accomplished by the flat face of the cutter whose axis is perpendicular to the work surface.

How do shaping and planing differ?

In shaping, the work is stationary during the cut, and the speed motion is performed by the cutting tool; while in planing, the cutting tool is stationary, and the workpart is moved past the tool in the speed motion.

Describe the difference between up milling and down milling?

In up milling, the cutter speed direction is opposite the feed direction; in down milling, the direction of cutter rotation is the same as the feed direction.

What is the difference between internal broaching and external broaching?

Internal broaching is accomplished on the inside surface (hole) of a workpart; while external broaching is performed on one of the outside surfaces of the part.

Name the various ways in which a workpart can be held in a lathe.

Methods of holding the work in a lathe include: (1) between centers, (2) chuck, (3) collet, and (4) face plate.

What is pocket milling?

Pocket milling uses an end milling cutter to machine a shallow cavity (pocket) into a flat workpart.

Describe profile milling.

Profile milling generally involves the milling of the outside periphery of a flat part.

What are the differences between rotational parts and prismatic parts in machining?

Rotational parts are cylindrical or disk-shaped and are machined on a turning machine (e.g., a lathe); prismatic parts are block-shaped or flat and are generally produced on a milling machine, shaper, or planer.

List the four axes for a vertical machining center (VMC) with a rotational axis on the table.

The four axes are the three linear axes: X, Y, and Z; and the rotational axis: B.

What can a mill-turn center do that a conventional turning center cannot do?

The mill-turn center has the capacity to position a rotational workpart at a specified angular location, permitting milling or drilling to be performed at a location on the periphery of the part.

Describe the turning process.

Turning is a machining process in which a single-point tool removes material from the surface of a rotating cylindrical workpiece, the tool being fed in a direction parallel to the axis of work rotation.

For what types of parts are VTLs (vertical turret lathes) used?

VTLs are used to turn large diameter round parts that are too large to be held in a horizontal lathe.


Kaugnay na mga set ng pag-aaral

CHAPTER 10 STABILITY AND CONTROL (ATPL OXFORD)

View Set

Chapter 8 Managing Databases in the Cloud

View Set

Ch 14: Materials Requirement Planning

View Set

Ch. 11 and 13: Care for IV Lines (Nurs 309)

View Set