Chapter 67-69
To fasten gypsum board properly, the fasteners should have a ___" _____ in the paper
1/16 dimple
Common thicknesses of gypsum board are ____" and ____"
1/2, 5/8
The thickness for a gypsum use for short radia is ___"
1/4
Joints in a face layer are offset ____" from the joints in base layer
10
_________ comes from the earth
Gypsum
Type ____ screws are used to fasten gypsum board to metal framing.
J
A brand name for gypsum board is________
Sheetrock
Tools used to fasten corners boards is a _______ _______
clinching tool
The purpose in tapered edges on the face side is to be able to _______ ______ _____
conceal the joints
A joint that relieves stress index by contraction is a ______ ______
control joint
A type of gypsum board that comes in 24" widths is _________
core board
Exterior corners are made of _____ ______
corner boards
A build up in the gypsum board is called ________
crown joint
A handy tool used to hold drywall on ceiling is ___________
dead man
Type _____ screws are used to fasten gypsum board to wood.
W
For greater holding power, gypsum board nail fasteners should be_______
annular ring shaped
The term drywall construction generally means the ________
application of gypsum board to inside walls and ceiling.
A gypsum board designed to receive application of veneer plastics is________
blue board
Leaning gypsum boards against framing can cause ________
boards to warp
A fast way to make cut outs is to use a _______ _____ ______
drywall cutout tool
When bonding gypsum board directly to a frame use ________
drywall stud adhesive
The second coat of a compound is called _________________
filled coat
A positive feature of gypsum is that it's easy to apply and_______
fire resistance drawn
Multilayer application of gypsum board provides ___________
greater strength
Water resistant gypsum board has a ________ face.
green
Water resistant gypsum board is called ________
green board
Vertical application may be more practical when a wall ______________
is less than 4'
A disadvantage of using contact adhesive board is that __________
it can't move after contact
The tool used in cutting gypsum board is a ________
knife
Gypsum board may be bent to curve if ___________
moistened
The backside of gypsum board is covered with a ___________
natural finish paper
Control joint are metal stripes with _____ _____ ____ _____ ____
phalanges on both sides
Drywall screws are driven with a ___________________
power screw gun
Metal corner tape is used for ______ _____ ____
protection on corners
The gypsum used in single or multi applications are called ___________
regular gypsum panels
Gypsum board is sometimes called_________
sheetrock or drywall
The application of the compound is called
spotting
The face side of gypsum board is covered with a ________
strong finish paper
Ceiling joist can be brought into alignment using a ________
strongback
The reason that gypsum is fire resistant is because of ________
the added additives
A panel with a reinforced core is ___________
wonder board
Cement board is used as a base for ceramic tile in _________, __________, and __________.
bathtubs, kitchen, laundry areas
