Chapter 8 Concept Checks

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

Producer's Risk refers to which of the following scenarios?

When a buyer rejects a shipment of high quality units because the sample did not meet the acceptance standard.

Calculate the number of inventory containers (round up) required given the following Demand rate= 12 parts per hour Safety Stock required = 10% Size of containers = 8 parts Time to cycle through the system = 4 hours

[12(4)(1.1)]/8 = 6.6 or 7 rounding up

Poka-yoke refers to:

Error- or mistake-proofing

Variations in process measurements can be classified as either natural or:

assignable

Which of the following is NOT one of the seven wastes

Environmental waste

A company makes golf balls with painted logos in boxes of 100. The organization wants to construct a P-chart to track the percentage of golf balls with no logo in each sample. If the company used one box in each sample in the dataset, what is the sample standard deviation for the P-chart? Choose the closest answer.

.019

A company that produces 8 pound bags of potting mix gathered 4 samples of 5 bags. The weights of each bag are listed below. What is R?

.40

Bill owns Speedy Deliveries and keeps track of customer complaints. For each delivery, there are two possible complaints: a late delivery and a wrong delivery. Bill tracks the delivery "defects" and then uses this information to determine his company's Six Sigma quality level. During the past week, his company made 322 deliveries. His drivers received 8 late delivery complaints and 4 incorrect delivery complaints. What is Bill's defects per million opportunities (DPMO)?

18634

According to the Six Sigma philosophy, the Six Sigma goal is to have ____ defects per million measurement opportunities.

3.4

A company that produces 8 pound bags of potting mix gathered 4 samples of 5 bags. The weights of each bag are listed below. What is X ?

8.10

C charts are useful when:

A number of mistakes or errors can occur per unit of output, but they occur infrequently

When purchase order quantities are cut in half, which of the following will be true

Average inventory levels will also be cut in half

Which of the following quality gurus believe that companies should strive for zero defects and that quality was, in a sense, free since quality improvement programs invariably paid for themselves?

Crosby

If lot sizes are reduced by 50%, what impact will this have on average inventory levels

Decrease by 50%

The person credited with creating the modern quality system is

Deming

An important outcome of statistical process control is

Firms can take corrective actions before process variabilities get out of control Firms can visually monitor process performance

Annotated boxes representing process to show the flow of products or customers.

Flow Diagrams

Which of the following is NOT consistent with the lean philosophy

Increasing batch sizes to take advantage of economies of scale

Which of the following are among the MOST important elements of the lean production philosophy

Inventory reduction and continuous improvement

How do lean systems impact the environment?

It reduces waste, which improves the environment

Lean production systems are sometimes referred to as pull systems because demand from customers activates the production actions of the manufacturing facilities. In order for this demand to be communicated to everyone in the supply chain/manufacturing facility a signal must be passed from downstream processing centers tot he upstream processing centers. This system of relaying signals is referred to as a

Kanban System

Moving small production batches through a lean production facility is often accomplished using

Kanbans

Japanese manufacturing firms sometimes create cooperative coalitions with their suppliers in order to provide the suppliers with a certain degree of financial support. What are these cooperative coalitions called?

Keiretsu Networks

When a process is considered in control, this means that:

Only natural process variations are present. No data plots fall outside the control limits. The data plots appear normally distributed around the desired measurement.

Which tool is useful for presenting data in an organized fashion, indicating process problems from most to least severe

Pareto Charts

The Toyota Production System was initially designed based on:

Several trips by the Toyoda family to the Ford manufacturing plant.

In lean terminology, yokoten refers to:

Sharing best practices with suppliers and customers.

Use of Six Sigma helps supply chains become lean, due to:

The impact that improved quality has on reducing safety stocks

Attribute data are shown as:

The percent defectives within a sample.

Which tool is useful for determining the frequencies of specific problems?

check sheet

Which of the following is the MOST important elements of the lean production philosophy?

inventory reduction and continuous improvement

Check Sheets

to determine frequencies for specific problems.

Cause and Effect Diagrams (Fishbone or Ishikawa diagrams)

used to aid in brainstorming & isolating the causes of a problem.


Kaugnay na mga set ng pag-aaral

Unit 3: Trading, Accounts, Prohibited Activities

View Set

{{Richard}} English Midterm 𝙂𝙧𝙖𝙢𝙢𝙚𝙧 ***in order for this to actually help you: use the writing tool NOT multiple-choice tool**

View Set

History Exam Study Questions (Chapter 14)

View Set

Chapter 21 - Decomposition and Nutrient Cycling

View Set

"Continuidad de los parques" - Continuity of the parks

View Set

Federal Regulation of Medication

View Set