Chapter 9 Labs

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

Configure a Wireless Infrastructure You work at a computer repair store, and you are at a customer's office. They have signed up for cable internet access. The cable company has come and installed the line into their office. You need to configure the network so that wired and wireless computers can share the cable internet connection. In the customer's office, all connectors on the wall plate are for WAN connections only; you do not have LAN connections inside the office. In this lab, your task is to connect the components to make the internet connection. Add the cable modem to the Workspace.Connect the modem to the WAN connection.Plug in the modem. Add the wireless router to the Workspace.Connect the internet port on the router to the cable modem.Connect the computer to a Ethernet port on the wireless router.Plug in the wireless router.

Connect the modem to the WAN connection. On the Shelf, expand Routers. Drag the Cable Modem/Router from the Shelf to the Workspace. Above the cable modem, select Back to switch to the back view of the cable modem. On the Shelf, expand Cables. Select the coaxial cable. Under Selected Component, drag a Coaxial Type F Connector to the port on the cable modem. Under Selected Component, drag the other Coaxial Type F Connector to the port on the wall plate. Connect the wireless router to the cable modem. On the Shelf, expand Routers. Drag the wireless router from the Shelf to the Workspace. Above the wireless router, select Back to switch to the back view of the wireless router. On the Shelf, expand Cables. Select the Cat6a cable. Under Selected Component, drag a RJ45 Connector to the Internet port on the wireless router. Under Selected Component, drag the other RJ45 Connector to the port on the cable modem. Connect the computer to the wireless router. Above the computer, select Back to switch to the back view of the computer. On the Shelf, select the Cat6a cable. Under Selected Component, drag a RJ45 Connector to the network port on the computer. Under Selected Component, drag the other RJ45 Connector to an Ethernet port on the wireless router. Plug in the cable modem. On the Shelf, select the Power Adapter. Under Selected Component, drag the DC Power Connector to the port on the cable modem. Under Selected Component, drag the AC Power Adapter to the power outlet. Plug in the wireless router. On the Shelf, select the Power Adapter. Under Selected Component, drag the DC Power Connector to the port on the wireless router. Under Selected Component, drag the AC Power Adapter to the power outlet.

Secure an Enterprise Wireless Network You are a network technician for a small corporate network. You need to increase the security of your wireless network. Your new wireless controller provides several security features that you want to implement. Access the Wireless Controller console through Chrome on http://192.168.0.6 with the username admin and the password password. In this lab, your task is to: Change the admin username and password for the Zone Director controller to the following:Admin Name: WxAdminPassword: ZDAdminsOnly!$ (O is the capital letter O) Set up MAC address filtering (L2 Access Control) to create a whitelist called Allowed Devices that includes the following wireless devices:00:18:DE:01:34:6700:18:DE:22:55:9900:02:2D:23:56:8900:02:2D:44:66:88 Implement a device access policy called NoGames that blocks gaming consoles from the wireless network.

Change the admin username and password as follows: From the taskbar, open Chrome. Type 192.168.0.6 and press Enter. Maximize the window for easier viewing. In the Admin Name field, enter admin. In the Password field, enter password. Select Login. From the top, select the Administer tab. Make sure Authenticate using the admin name and password is selected. In the Admin Name field, enter the new username. In the Current Password field, enter the current password. In the New Password field, enter the new password. In the Confirm New Password field, enter the new password. On the right, select Apply. Enable MAC address filtering as follows: From the top, select the Configure tab. From the left menu, select Access Control. Expand L2-L7 Access Control. Under L2/MAC address Access Control, select Create New. In the Name field, enter Allowed Devices. Under Restriction, make sure Only allow all stations listed below is selected. Enter a MAC address. Select Create New. Repeat step 2g-2h for each MAC address you would like to add to the ACL. Select OK. Configure access controls as follows: Under Access Control, expand Device Access Policy. Select Create New. In the Name field, enter NoGames. Select Create New. In the Description field, enter Games. In the OS/Type drop-down list, select Gaming. In the Type field, select Deny. Under Uplink, make sure Disabled is selected. Under Downlink, make sure Disabled is selected. Select Save. Select OK.

Optimize a Wireless Network You are a network technician for a small corporate network. You want to take advantage of the self-healing features provided by the small enterprise wireless solution you've implemented. You're already logged in as WxAdmin on the Wireless Controller console from ITAdmin. In this lab, your task is to: Configure self healing on the wireless network.Automatically adjust AP radio power to optimize coverage when interference is present.Set 2.4GHz and 5GHz radio channels to use the Background Scanning method to adjust for interference. Configure the background scanning needed for rogue device detection, AP locationing, and self healing. Background scans should be performed on all radios every 30 seconds. Configure load balancing for all radios by adjusting the threshold to 40dB. Configure band balancing to allow no more than 30% of clients to use the 2.4GHz radios. Reduce the power levels to -3dB for three access points in Building A to reduce RF emanations. Use the wireless survey results in the exhibit to identify the access points.

Configure self healing. From the top, select the Configure tab. From the left menu, select Services. Select Automatically adjust AP radio power to optimize coverage when interference is present. Under Automatically adjust 2.4GHz channels using, select Background Scanning from the drop-down menu. Under Automatically adjust 5GHz channels using, select Background Scanning from the drop-down menu. On the right, select Apply. Configure background scanning. Select Run a background scan on 2.4GHz radio. Enter 30 seconds. Select Run a background scan on 5GHz radio. Enter 30 seconds. On the right, select Apply. Configure load balancing. Select Run load balancing on 2.4GHz radio. In the Adjacent radio threshold(dB) field, enter 40. Select Run load balancing on 5GHz radio. In the Adjacent radio threshold(dB) field, enter 40. On the right, select Apply. Configure band balancing. Select Percent of clients on 2.4GHz radio. Enter the percentage. On the right, select Apply. Adjust the AP power level. From the left menu, select Access Points. From the top right, select Exhibit to determine which access points to adjust. Select Edit next to the access point to be modified. Under Radio B/G/N(2.4G) next to TX Power, make sure Override Group Config is selected. From the TX Power drop-down list, select -3dB (1/2). Under Radio A/N/AC(5G) next to TX Power, make sure Override Group Config is selected. From the TX Power drop-down list, select -3dB (1/2). Select OK.

Design an Indoor Wireless Network You are a network technician for a small corporate network. Your office needs a wireless network for employees. You've already installed and configured a wireless controller, and you're in the process of installing wireless access points (WAPs) in the office. In this lab, your task is to install the proper types of WAPs to provide adequate wireless coverage while also reducing signal emanation as much as possible. As you install each WAP, consider the following: Use the best antenna type for the specific placement location. There are two WAP antenna types available, directional and omnidirectional. Reduce signal emanation, which is as important as adequate wireless coverage. Do not install more equipment than necessary. Only three WAPs are required to complete this lab.

On the Shelf, expand Wireless Access Points. Drag the Wireless Access Point (Omnidirectional Antenna) to the wall behind the reception desk in the Lobby. Drag one Wireless Access Point (Directional Antenna) to the installation area on the left wall of the IT Administration office. Drag another Wireless Access Point (Directional Antenna) to the installation area on the right wall of the Networking Closet.

Secure a Home Wireless Network You are working on a small office/home office (SOHO) network. You recently created a wireless network to allow the owner's laptop and mobile devices to make a connection to the wired network and the internet. However, without additional configuration, the wireless access point will allow connections from any laptop or mobile device. You need to secure the wireless network from unauthorized access. To view and configure the wireless access point: Use Chrome on Home-PC. Go to 192.168.0.254, and use the following default authentication credentials:Username: adminPassword: password In this lab, your task is to: Change the settings on the wireless access point as follows:Use PoliceVan for the SSID. The SSID name is case sensitive.Use WPA2-PSK authentication with AES for encryption.Configure 4WatchingU as the pass phrase. The pass phrase is case sensitive. Change the wireless access point's administrator authentication credentials from their defaults as follows:Username: @dm1nPassword: StayOut! (O is the capital letter O)Do not save the credentials in Chrome. Configure the laptop to connect to the wireless network and save the wireless profile with the settings as listed above. Start Lab

Change the settings on the wireless access point. From the taskbar, open Chrome. In the URL field, type 192.168.0.254 and press Enter. In the Username field, enter admin. In the Password field, enter password. Make sure Remember my credentials is not selected.Select OK. Maximize the window for easier viewing. n the left menu, select Wireless. Select Basic. In the Wireless Name (SSID) field, enter PoliceVan. Select Apply. Make sure admin is entered in the Username field. Make sure password is entered in the Password field. Select OK. In the left menu under Wireless, select Security. From the Security Mode drop-down list, select WPA2-PSK.In the Pass Phrase field, enter 4WatchingU as the pass phrase. Select Apply. Change the wireless access point's administrator authentication credentials from their defaults. On the left, select Administrator. Select Management. In the Account field, enter @dm1n as the new username. In the Password field, enter StayOut! (O is the capital letter O).Select Apply. Close Chrome. Configure the Home-Laptop to connect to the wireless network and save the wireless profile. From the top navigation tabs, select Computer Desk. On the monitor of Home-Laptop, select Click to view Windows 10.In the notification area, select the Network icon. Select PoliceVan. Make sure Connect automatically is selected. Select Connect. In the Security Key field, enter 4WatchingU.Select Next. Select Yes to make your PC discoverable on the network. In the notification area, select the Network icon in the notification area or open the Network & Internet settings to confirm the connection.

Design an Outdoor Wireless Network You are a network technician for a small corporate network. You need to create a network connection between two buildings. You've decided that a wireless connection between the two buildings is the best solution. Employees have complained about the wireless connection on both buildings' patios. You conducted a wireless site survey and found that the wireless signal is very poor on both patios. In this lab, your task is to complete the following: Install the proper antenna on the roof of both buildings to provide a high-speed wireless connection between them. Use the wireless survey exhibit to identify weak signal areas and determine which type of antenna to use with the WAP. Install the appropriate WAP on the roof of each building. Attach the antenna that will provide adequate coverage to only the problem area.

Install an antenna on each building's roof to provide a high-speed wireless connection. On the Shelf, expand High-gain Antennas. Drag the High-gain Antenna (Directional) to the installation area on Building A's roof. You use a high-gain directional antenna for the connection between the buildings to provide a very strong, concentrated signal in only one direction. Using a high-gain omnidirectional antenna will broadcast the signal in all directions for a very long distance, introducing a security vulnerability. Drag the remaining High-gain Antenna (Directional) to the installation area on Building B's roof. Install a WAP on each building's roof. On the Shelf, expand Wireless Access Points. Drag the Wireless Access Point (Outdoor) to the installation area on Building A's roof. Because you need to provide coverage to only the patio areas, the best antenna choice is a directional antenna. Outdoor WAPs are designed to withstand outdoor conditions, such as heat, cold, and rain. Drag the remaining Wireless Access Point (Outdoor) to the installation area on Building B's roof. Attach both antennae to provide adequate coverage. On the Shelf, expand WAP Antennas. Drag the WAP Antenna (Directional) to one of the installed outdoor WAPs. Drag the remaining WAP Antenna (Directional) to the other installed outdoor WAP.

Troubleshoot Wireless Network Problems You are a network technician for a small corporate network. You recently updated the wireless networks in the building. In the Executive Office, Exec-Laptop is having problems connecting to the CorpNet wireless network and the internet. You need to diagnose and fix the problem so that this laptop can connect to the wireless network. The security key @CorpNetWeRSecure!& is for the wireless network. In this lab, your task is to: Use the following troubleshooting tools to diagnose the problem in the wireless network.Use the Gst-Lap in the Lobby to verify that the wireless access point is working.Use the wireless controller management interface as follows:Browser: ChromeIP address: 192.168.0.6Username: WxAdminPassword: ZDAdminsOnly!$Use the Network and Sharing Center in the Windows operating system. Use the troubleshooting tools to confirm the resolution of the problem. Fix the problem on Exec-Laptop, the wireless controller interface, or both as necessary. Connect to the CorpNet wireless network.

Under Lobby, select Gst-Lap. In the notification area, select the wireless network icon to view the available networks to verify the problem found on the laptop in the Executive Office. The CorpNet wireless network is displayed in the list of available networks. Select the CorpNet wireless network. Select Connect. Enter @CorpNetWeRSecure!& for the security key and select Next. Select Yes. Gst-Lap is now connected to the CorpNet wireless network. Because Gst-Lap can connect to the wireless network, the problem may be limited to only the Exec-Laptop laptop in the Executive Office. From the top navigation tabs, select Floor 1 Overview to switch to Exec-Laptop. Under Executive Office, select Exec-Laptop. In the notification area, select the wireless network icon to view the available networks. There are no wireless networks shown as available for this laptop. Possible causes for this include: The wireless network interface card is not turned on (the wireless switch on the exterior of the laptop is in the off position). Since no wireless networks are shown in the list, you must take additional steps. The wireless network's SSID is not broadcasted. From step 1, you know that the wireless access point is broadcasting the SSID. The wireless access point is not powered on. From step 1, you know that the wireless access point is powered on. From the top navigation tabs, select Executive Office. On the front of the Exec-Laptop, confirm that the switch for the wireless network interface card is in the On position. The switch is in the off position. Slide the wireless switch to the On position to turn the wireless network interface card on. On the laptop monitor, select Click to view Windows 10. In the notification area, select the wireless network icon to view the available networks. The CorpNet wireless network is now displayed in the list of available networks. Select the CorpNet wireless network. Select Connect. Enter @CorpNetWeRSecure!& for the security key and select Next. Select Yes. Exec-Laptop is now connected to the CorpNet wireless network.


Kaugnay na mga set ng pag-aaral

Sukys Business Law 15th Edition Ch. 1-3

View Set

The Ovaries and Fallopian Tubes - Chapter 18 (Review Questions)

View Set

Exam 3 Study Questions 345 Sexuality Quiz

View Set

MC Test for Unit 3 APUSH PART 1!!

View Set

MICROBIO 310 Exam 1 Sample Questions

View Set

Personal Finance Quiz 1 Study Guide True+False Section

View Set

Business Management Final Study Guide

View Set

Chapter 5 - Group Life Insurance

View Set