Fire Extinguisher Test

Each fire extinguisher shall be marked with the following:

1. Identification of the listing and labeling organization 2. Product category indicating the type of extinguisher 3. Extinguisher classification as indicated in section 5.3 4. Performance and fire test standards that the extinguisher meets or exceeds

Obsolete Fire Extinguishers. The following types of fire extinguishers are considered obsolete and shall be removed from service:

1. Soda acid 2. Chemical foam (excluding film-forming agents) 3. Vaporizing liquid (e.g., carbon tetrachloride) 4. Cartridge-operated water 5. Cartridge-operated loaded stream 6. Copper or brass shell (excluding pump tanks) joined by soft solder or rivets 7. Carbon dioxide extinguishers with metal horns 8. Solid charge-type AFFF extinguishers (paper cartridge) 9. Pressurized water fire extinguishers manufactured prior to 1971 10. Any extinguisher that needs to be inverted to operate 11. Any stored pressure extinguisher manufactured prior to 1955 12. ANY EXTINGUISHERS WITH 4B, 6B, 8B,12B, and 16B FIRE RATINGS. 13. Stored-pressure water extinguishers with fiberglass shells (pre-1976)

Identification of Contents. A fire extinguisher shall have a label, tag, or stencil attached to it providing the following information:

1. The content's product name as it appears on the manufacturer's Material Safety Data Sheet (MSDS) 2. Listing of the hazardous material identification in accordance with Hazardous Materials Identification System (HMIS), Implementational Manual 3. List of any hazardous materials that are in excess of 1.0 percent of the contents 4. List of each chemical in excess of 5.0 percent of the contents 5. Information as to what is hazardous about the agent in accordance with the MSDS 6. Manufacturer's or service agency's name, mailing address, and phone number

Fire extinguishers manufactured prior to January 1, 1986, shall not be required to comply with

4.1.2

Fire extinguishers manufactured prior to January 1, 1989, shall not be required to comply with

4.1.3

High-Pressure Cylinder. Cylinders (and cartridges) containing nitrogen, compressed air carbon dioxide, or other gases at a pressure higher than 500 psi (3447 kPa) at

70 F (21 C)

Stored-Pressure Fire Extinguisher

A fire extinguisher in which both the extinguishing agent and the expellant gas are kept in a single container, and that includes a pressure indicator or gauge.

Portable Fire Extinguisher

A portable device, carried or on wheels and operated by hand, containing an extinguishing agent that can be expelled under pressure for the purpose of suppressing or extinguishing fire.

Wheeled Fire Extinguisher

A portable fire extinguisher equipped with a carriage and wheels intended to be transported to the fire by one person.

Loaded Stream Charge

A water-based extinguishing agent that uses an Alkali metal salt as a freezing point depressant.

Film-Forming Foam Agents

Aqueous film-forming foam (AFFF) and film-forming fluoroprotein foam (FFFP).

Instruction Manual

The owner or the owner's agent shall be provided with a fire extinguisher instruction manual that details condensed instructions and cautions necessary to the installation, operation, inspection, and maintenance of the fire extinguisher(s).

Fire extinguishers containing water-based agents that have a conductivity higher than 1.00 uS/cm at 25 C (77 F) shall be considered a

conductor of electricity and therefore not be rated Class C

In addition to successfully meeting the requirements of ANSI/UL 711, CAN/ULC-S508

water-based agents shall be tested in accordance with ASTM D 5391, Standard Test for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample.