Inteletek Power Tools
Small button on top
Where is the shaft lock
threaded
Which rotary tool mandrel should be used for polishing discs.
Shoe
maintains depth of cut
120 grit
moderate smoothing
shoe plate
supports the blade under horizontal force
stand
supports the body of the tool
table
supports the work piece
drive pulley
transfers power from motor to blade wheels
Cut-off blade
used for creating a channel in concrete
Flex wheel
used for grinding inside a contour
Cut-off disk
used for segmenting a heavy pipe
Grinding wheel
used for sharpening tools
kickback
Guards and shields on a bench grinder do not protect the user from which of the following?
vibratory sander
Light detail sanding
feed lever
Lowers and raises the chuck
Blade lock
immobilizes spindle
crimped wire wheel
shaping soft plastics
abrasive grinding wheel
sharpen tools
remove spindle nut, adjust blade guard, install cut-off wheel, plug in tool
Place the following tasks in the order they should be performed before cutting with an angle grinder.
orbital sander
Smoothing shallow imperfections
cutting a round hole
The blade of a reciprocating saw is not designed to effectively perform which of the following applications
rotational speed
The speed control switch on a dual speed drill limits the ______ of the bit.
Far Left
To drill into a work piece, the directional switch must be in what position?
unplug the machine
What is the first task that must be performed when changing the spindle speed on a drill press?
7-1/4"
What is the smallest blade that can fit in a 7-1/4" circular saw?
Clutch
What part of a power drill protects the motor from excessive torque?
guard
What protects the operator from the cutting edge of a jigsaw blade?
Disconnect the saw from the power source, remove the throat plate, raise the arbor, remove the old blade
When changing a table saw blade, which is the correct order of steps to perform?
Set blade speed, Clamp workpiece, Switch power on, Set feed rate
When cutting a workpiece with a horizontal bandsaw, what are the order of steps?
work piece rest
Which of the following acts as a backstop on a bench grinder?
36 amp motor
Which of the following features is not available on a consumer grade jigsaw?
belt sander
Which of the following hand-held sander types is the most aggressive? also used for Leveling hard surfaces.
angle of cut
Which of the following is not a factor when choosing a bandsaw blade?
speed control
Which of the following is not a feature of a standard table saw?
blade lock
Which of the following is not part of the shoe on a circular saw?
metal
Which type of material should never be cut with a reciprocating saw set on orbital action?
crimped wire cup
Which wheel type should be used with an angle grinder when removing surface rust on a large
buffing wheel
burnishing
chuck
clamping device for holding a drill bit The collet and collet nut on a rotary tool perform the same task as a ______ on a power drill or drill
Depth stop
controls distance bit can travel
trigger
controls power output of motor
Feed control
controls the rate of vertical movement of the bit
belt
determines spindle speed
miter gauge
determines the horizontal angle of a cup
220 grit
finish surface preparation
blade guide
guides the exposed blade transfers
36 grit
heavy material removal
arbor
holds and rotates the blade
Angle lock
holds blade at specified angle
guide wheel
maintains the tool body's distance from the workpiece
table degree scale
measures degrees
orbital mode
moves the blade forward on an upstroke
1000 grit
polishing
trigger lock
prevents accidental startup
Blade housing
protects user from blade
table insert
provides access to the blade
elevation wheel
raises and lowers the blade
knotted wire wheel
removing excess solder
clamp assembly lock
secures the blade
variable speed control
sets the maximum SPM