lab 8 stream processes
Delta
A landform made of sediment that is deposited where a river flows into an ocean or lake
oxbow lake
A meander that has been cut off from the river
braided stream
A stream or river that is composed of multiple channels that divide and rejoin around sediment bars
alluvial fan
A wide, sloping deposit of sediment formed where a stream leaves a mountain range
yazoo tributary
If a tributary cannot breach a river's levee, then it will become a yazoo tributary that flows parallel to the river
head
In the uplands, a stream's (tributary's) point of origin
differential erosion
Rocks composed of soft and more easily weathered minerals are generally less resistant to erosion and form valleys
drainage basin
The entire area of land that is drained by one stream, or an entire stream drainage system
divides
The linear boundaries that separate one drainage basin from another
natural levees
The more abundant minor flooding events deposit sediment only where the water barely overflows the river's banks. Over time, this creates natural levees that are higher than the rest of the floodplain
uplands
The smallest valleys in a drainage basin occur at its highest elevations
escarpments
The steep slopes or cliffs separating the relatively horizontal stream terraces
meandering
Winding back and forth
Sinuosity
a measure of how much a stream meanders side-to-side, the way a snake crawls
stream order
a measure of the relative size of streams. The smallest tributaries are referred to as first-order streams, while the largest river in the world, the Amazon, is a twelfth-order waterway. First- through third-order streams are called headwater streams.
Rectangular pattern
a network of channels with right-angle bends that form a pattern of interconnected rectangles and squares. This pattern often develops over rocks that are fractured or faulted in two main directions that are perpendicular (at nearly right angles) and break the bedrock into rectangular or square blocks. The streams erode channels along the perpendicular fractures and faults.
Deranged pattern
a random pattern of stream channels that seem to have no relationship to underlying rock types or geologic structures.
Annular pattern
a set of incomplete, concentric rings of streams connected by short radial channels. This pattern commonly develops on eroding structural domes and folds that contain alternating folded layers of resistant and nonresistant rock types.
Radial pattern
channel flow outward from a central area, resembling the spokes of a wheel. Water drains from the inside of the pattern, where the "spokes" nearly meet, to the outside of the pattern (where the "spokes" are farthest apart). This pattern develops on conical hills, such as volcanoes and some structural domes.
Centripetal pattern
channels converge on a central point, often a lake or playa (dry lake bed), at the center of a closed basin (a basin from which surface water cannot drain because there is no outlet valley).
point bar
deposit of sediment build up by a river on the inside bend of a meander
Floodplains
develop when alluvium accumulates landward of the river banks, during floods
sinuosity can be calculated by
dividing the length of a stream channel (along the winding path of water flow) by the straight-line distance from start to end of the stream segment
stream drainage system
drainage network including upland tributaries and main stream
how to calculate gradient
elevation over distance
Perennial streams
flow continuously throughout the year and are represented on topographic maps as blue lines
Intermittent streams
flow only at certain times of the year, such as rainy seasons or when snow melts in the spring. They are represented on topographic maps as blue line segments separated by blue dots (three blue dots between each line segment)
cutbanks
form at the outer edge of meanders and experience erosion
Alluvium consists of
gravel, sand, silt, and clay deposited in floodplains, point bars, channel bars, deltas, and alluvial fans
Load
he amount of material (mostly alluvium, but also plants, trash, and dissolved material) that is transported by a stream. In the uplands, most streams have relatively steep gradients, so the streams cut narrow, V-shaped valleys. Near their heads, tributaries are quick to transport their load downstream, where it combines with the loads of other tributaries.
stream drainage pattern
is the arrangement of stream channels and tributaries that forms on a landscape as a result of its underlying geology and relief.
stream terraces
old floodplain deposits left high as streams downcut through their own floodplains
Trellis pattern—
resembles a vine or climbing rose bush growing on a trellis, where the main stream is long and intersected at nearly right angles by its tributaries. This pattern commonly develops where alternating layers of resistant and nonresistant rocks have been tilted and eroded to form a series of parallel ridges and valleys. The main stream channel cuts through the ridges, and the main tributaries flow perpendicular to the main stream and along the valleys (parallel to and between the ridges).
Dendritic pattern
resembles the branching of a tree. Water flow is from the branch-like tributaries to the trunk-like main stream or river. This pattern is common where a stream cuts into flat lying layers of rock or sediment. It also develops where a stream cuts into homogeneous rock (crystalline igneous rock) or sediment (sand).
headward erosion
stream channels deepen and erode their V-shaped channels uphill through time
mouth
the end of a river valley
what happens to the gradient of a stream as order increases
the gradient decreases as order increases
Base level
the lowest level to which a stream can theoretically erode. For example, base level is achieved where a stream enters a lake or ocean. At that point, the erosional (cutting) power of the stream is zero and depositional (sediment accumulation) processes occur.
fluvial processes
the processes of erosion, transport and deposition associated with rivers and streams
Discharge
the rate of stream flow at a given time and location. Discharge is measured in water volume per unit of time, commonly cubic feet per second (ft3/sec).
channel bars
underwater sandbars
sheet flow
water that flows across paved surfaces.