Module 16-17 Review
What type of information security threat is this scenario? Obtaining trade secret documents illegally
Information Theft
What type of security weakness is shown in this example? When implementing an access list on a router, a network engineer did not filter a type of malicious traffic.
Configuration weakness
What steps are needed to configure a switch for SSH?
Create a local user Generate RSA keys Configure a domain name Use the login local command Use the transport input ssh command
What type of information security threat is this scenario? Installing virus code to destroy surveillance recordings for certain days
Data Loss
What type of information security threat is this scenario? Preventing users from accessing a website by sending a large number of link requests in a short period
Disruption of Service
What is considered the most effective way to mitigate a worm attack?
Download security updates from the operating system vendor and patch all vulnerable systems.
What type of information security threat is this scenario? Pretending to be someone else by using stolen personal information to apply for a credit card
Identity Theft
Which method is used to send a ping message specifying the source address for the ping?
Issue the ping command without specifying a destination IP address.
An administrator decides to use "pR3s!d7n&0" as the password on a newly installed router. Which statement applies to the password choice?
It is strong because it uses a minimum of 10 numbers, letters and special characters.
An administrator decides to use "12345678!" as the password on a newly installed router. Which statement applies to the password choice?
It is weak because it uses a series of numbers or letters.
An administrator decides to use "Feb121978" as the password on a newly installed router. Which statement applies to the password choice?
It is weak because it uses easily found personal information.
A user reports a lack of network connectivity. The technician takes control of the user machine and attempts to ping other computers on the network and these pings fail. The technician pings the default gateway and that also fails. What can be determined for sure by the results of these tests?
Nothing can be determined for sure at this point.
A technician is to document the current configurations of all network devices in a college, including those in off-site buildings. Which protocol would be best to use to securely access the network devices?
SSH
What is the advantage of using SSH over Telnet?
SSH provides secure communications to access hosts.
An employee complains that a Windows PC cannot connect to the Internet. A network technician issues the ipconfig command on the PC and is shown an IP address of 169.254.10.3. Which two conclusions can be drawn?
The PC cannot contact a DHCP server. The PC is configured to obtain an IP address automatically.
What does the letter "U" indicate in the ping output on a switch?
The letter "U" indicates that a router along the path did not have a route to the destination and sent an ICMP destination unreachable message back to the source.
Describe the ping and tracert commands.
Tracert shows each hop, while ping shows a destination reply only.
What type of firewall filtering is described in this example? Prevents or allows access based on web addresses or keywords
URL filtering
A student wants to save a router configuration to NVRAM. What is the best command to use to accomplish the task?
copy running-config startup-config
What is the role of an IPS?
detecting and blocking of attacks in real time
A user wants to know the IP address of the PC. What is the best command to use to accomplish the task?
ipconfig
A support technician needs to know the IP address of the wireless interface on a MAC. What is the best command to use to accomplish the task?
ipconfig getifaddr en0
A user is redesigning a network for a small company and wants to ensure security at a reasonable price. The user deploys a new application-aware firewall with intrusion detection capabilities on the ISP connection. The user installs a second firewall to separate the company network from the public network. Additionally, the user installs an IPS on the internal network of the company. What approach is the user implementing?
layered
Which example of malicious code would be classified as a Trojan horse?
malware that was written to look like a video game
An administrator is troubleshooting connectivity issues and needs to determine the IP address of a website. What is the best command to use to accomplish the task?
nslookup
Users are complaining that they are unable to browse certain websites on the Internet. An administrator can successfully ping a web server via its IP address, but cannot browse to the domain name of the website. Which troubleshooting tool would be most useful in determining where the problem is?
nslookup
What type of firewall filtering is described in this example? Prevents or allows access based on the IP or MAC addresses of the source and destination
packet filtering
A network engineer is troubleshooting connectivity issues among interconnected Cisco routers and switches. Which command should the engineer use to find the IP address information, host name, and IOS version of neighboring network devices?
show cdp neighbors detail
Which command should be used on a Cisco router or switch to allow log messages to be displayed on remotely connected sessions using Telnet or SSH?
terminal monitor
What information about a Cisco router can be verified using the show version command?
the value of the configuration register
What is the purpose of the network security authentication function?
to require users to prove who they are
A network technician issues the C:\> tracert -6 www.cisco.com command on a Windows PC. What is the purpose of the -6 command option?
It forces the trace to use IPv6.
What does ping round trip time tell a network administrator?
Ping round trip time statistics are shown in milliseconds. The larger the number the more delay. A baseline is critical in times of slow performance. By looking at the documentation for the performance when the network is performing fine and comparing it to information when there is a problem, a network administrator can resolve problems faster.
A ping fails when performed from router R1 to directly connected router R2. The network administrator then proceeds to issue the show cdp neighbors command. Why would the network administrator issue this command if the ping failed between the two routers?
The network administrator wants to verify Layer 2 connectivity.
A teacher is having difficulties connecting his PC to the classroom network. He needs to verify that a default gateway is configured correctly. What is the best command to use to accomplish the task?
ipconfig
What feature of SSH makes it more secure than Telnet for a device management connection?
login information and data encryption
Which attack involves a compromise of data that occurs between two end points?
man-in-the-middle attack
A network technician is troubleshooting an issue and needs to verify the IP addresses of all interfaces on a router. What is the best command to use to accomplish the task?
show ip interface brief
Which command can an administrator issue on a Cisco router to send debug messages to the vty lines?
terminal monitor
What is the purpose of a small company using a protocol analyzer utility to capture network traffic on the network segments where the company is considering a network upgrade?
to document and analyze network traffic requirements on each network segment
Why would a network administrator use the tracert utility?
to identify where a packet was lost or delayed on a network
A network administrator is upgrading a small business network to give high priority to real-time applications traffic. What two types of network services is the network administrator trying to accommodate?
voice video
An administrator decides to use "Elizabeth" as the password on a newly installed router. Which statement applies to the password choice?
It is weak since it uses easily found personal information.
Which network service automatically assigns IP addresses to devices on the network?
DHCP
By following a structured troubleshooting approach, a network administrator identified a network issue after a conversation with the user. What is the next step that the administrator should take?
Establish a theory of probable causes.
What type of security weakness is shown in this example? The network administrator did not fully consider the implications of unauthorized users accessing the network.
Security policy weakness
What type of security weakness is shown in this example? A network engineer is examining the operating system of a network device for vulnerabilities.
Technological weakness
What is the difference between a virus and a worm?
Worms self-replicate but viruses do not.
A network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue?
an increase in host-to-host ping response times
What type of firewall filtering is described in this example? Prevents or allows access based on the port numbers used in the request
application filtering
On which two interfaces or ports can security be improved by configuring executive timeouts?
console ports vty ports
What is an accurate description of redundancy?
designing a network to use multiple paths between switches to ensure there is no single point of failure
What tool could the network administrator use on a router to prove that communication exists to remote host?
extended ping
Students who are connected to the same switch are having slower than normal response times. The administrator suspects a duplex setting issue. What is the best command to use to accomplish the task?
show interfaces
Which command can an administrator execute to determine what interface a router will use to reach remote networks?
show ip route
What type of firewall filtering is described in this example? Prevents or allows access based on whether the traffic is in response to requests from internal hosts
stateful packet inspection
Which firewall feature is used to ensure that packets coming into a network are legitimate responses to requests initiated from internal hosts?
stateful packet inspection
When configuring SSH on a router to implement secure network management, a network engineer has issued the login local and transport input ssh line vty commands. What three additional configuration actions have to be performed to complete the SSH configuration?
Generate the asymmetric RSA keys. Configure the correct IP domain name. Create a valid local username and password database.
An administrator decides to use "5$7*4#033!" as the password on a newly installed router. Which statement applies to the password choice?
It is strong because it contains 10 numbers and special characters.
An administrator decides to use "WhatAreyouwaiting4" as the password on a newly installed router. Which statement applies to the password choice?
It is strong because it uses a passphrase.
An administrator decides to use "password" as the password on a newly installed router. Which statement applies to the password choice?
It is weak because it is a commonly used password.
When applied to a router, which command would help mitigate brute-force password attacks against the router?
login block-for 60 attempts 5 within 60
Which type of attack involves an adversary attempting to gather information about a network to identify vulnerabilities?
reconnaissance
A network technician is troubleshooting an issue and needs to verify all of the IPv6 interface addresses on a router. What is the best command to use to accomplish the task?
show ipv6 interface
Only employees connected to IPv6 interfaces are having difficulty connecting to remote networks. The analyst wants to verify that IPv6 routing has been enabled. What is the best command to use to accomplish the task?
show running-config
An administrator decides to use "admin" as the password on a newly installed router. Which statement applies to the password choice?
It is weak because it is often the default password on new devices.
An administrator decides to use "RobErT" as the password on a newly installed router. Which statement applies to the password choice?
It is weak since it uses easily found personal information.
