OPMA CH6

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

Firms that service customers from finished goods inventory are known as which of the following

make-to-stock.

The ____ relationship identifies the restrictions imposed by product design and process technologies.

precedence

The calculated theoretical number of workstations should be _____.

rounded up to the next highest integer.

In a project layout, a high degree of _____ ____ is common.

task ordering

Which the following describes the layout for items produced through a fixed sequence of workstations?

Assembly line

A computer manufacturer offers 3 types of hard disk drives, 2 types of monitors, 4 types of batteries, and 5 choices of operating systems. How many total combinations are possible using these choices?

120 (3 x 2 x 4 x 5 = 120)

The efficiency of an assembly-line balance must always be less than or equal to

100%

Which of the following products would use a project layout?

Bridge

______ is used to avoid expensive shut downs by operating 24 hours a day.

Continuous process

Inventory turn

Cost of goods sold/Average inventory

Which of the following is not one of the five basic work flow structures?

Flow line

Which layout format groups machines to work on products that have similar processing requirements?

Manufacturing cell

Which of the following is one of the dimensions depicted on a product-process matrix?

Volume

In an organizational context, break-even analysis is also known as

cost-volume-profit analysis

A manufacturing cell is generally made up of ____ machines.

dissimilar

Inventory turn is calculated by

dividing cost of goods sold by average inventory value.

When parts are moved on a conveyor that passes a series of workstations in a uniform time interval, this is called the ___.

workstation cycle time

The time between successive units coming off the end of an assembly line is referred to as

workstation cycle time.

Standardization on the product-process matrix refers to

variations in the product.

Which are characteristics of a continuous process line?

- Highly automated machinery is used. - May operate 24 hours a day. - Shutdowns can be expensive.

Which of the following statements about inventory measures is TRUE?

- Inventory turn compares cost of goods sold to average inventory. - Days-of-supply measures how long (on average) a firm's inventory can support sales.

Identify the true statements about assembly-line and continuous process layouts.

- Often, the item being produced in a continuous process is a liquid or chemical that actually flows through the system. - In a continuous process, a product moves continuously through the process. - In an assembly line, a product goes through a progressive set of steps.

Customer order decoupling points

- can impact inventory investment. - determine lead times.

Lead time can vary based on

- location of the manufacturing facility - customization of the product being produced.

Rank the production process layouts from lowest- to highest-volume (top to bottom).

1. Project 2. Workcenter 3. Manufacturing cell 4.. Assembly line

Production process

1. Sourcing 2. Making 3. Delivering

Last year a firm had an average inventory of $1,500,000 and the cost of goods sold was $3,750,000. What was the days-of-supply last year?

146 (avg inventory / cogs) x 365 = 146

There are _____ dimensions depicted on a product-process matrix.

2

Last year a firm had an average inventory of $1,500,000 and the cost of goods sold was $3,750,000. What was the inventory turn last year?

2.6 (cost of goods sold / avg inventory)

An assembly line must produce 1,000 units in an 8 hour day. Assuming the line operates continuously, what is the required workstation cycle time?

28.8 seconds

If the sum of all task times is 100 seconds and the required cycle time is 21 seconds, what is the theoretical minimum number of workstations?

5 (sum of task times / required cycle time)

For an assembly-line system with 6 workstations, the cycle time is 27 seconds and the sum of task times is 120 seconds. What is the efficiency of this balance?

74.1% (sum of task time / (actual # of stations x cycle time))

Which of the following is NOT true about a workcenter layout?

A workcenter layout is commonly used for systems with high production volumes.

Which common layout format refers to the progressive build of a product?

Assembly line

Which layout moves product from workstation to workstation at a controlled rate?

Assembly line

Days-of-Supply

Average Inventory/Cost of goods sold x 365

Which process layout is best used for manufacturing liquids?

Continuous

Which of the following is NOT a step in the process of developing a manufacturing cell?

Determine which machines perform the same process.

True or false: The total work at a workstation is equal to the sum of all tasks to complete a product.

False

Little's law relates inventory, throughput rate, and flow time as

Inventory = Throughput rate x Flow time

The issue of balancing the level of finished inventory against the level of service to the customer occurs in which type of firm?

Make-to-stock

Which type of firm invests in lean manufacturing programs in order to improve customer service levels for a given inventory investment?

Make-to-stock

In which production system does the product remain in one place while resources (such as workers or equipment) travel to the product when needed?

Project layout

______ techniques are typically used to manage production processes that follow a project layout structure.

Project management

Which of the following is not a step in the process to balance an assembly line?

Randomly assign tasks to workstations.

Which of the following describes the step where parts are procured from one or more suppliers?

Sourcing

Total average value of inventory

Sum of raw material, work-in-process, and finished goods inventory

True or false: The longest required task time often defines the shortest possible workstation cycle time for production.

True

True or false: Typically, there is a trade-off where quicker response to customer demand comes at the expense of greater inventory investment.

True

A _____ line layout can increase operator access and improve workstation time.

U-shaped

Which of the following is not a way to reduce the required time for a task?

Use a less skilled worker

Firms invest in lean manufacturing programs in order to

achieve high customer service with minimum levels of inventory investment.

Workcenters with large amounts of interdepartmental traffic are often placed

adjacent to each other.

A flexible line layout may improve assembly-line balance by

allowing work sharing among employees.

In an organizational context, the main purpose of break-even analysis is to

ascertain the quantity at which the initial investment starts to make a profit

An _____ arranges processes according to the sequence of steps by which the product is manufactured.

assembly line

The point in the supply chain where inventory is positioned to allow the preceding processes to operate independently is the

customer order decoupling point.

The required workstation cycle time is determined by

dividing the production time per day by the required output per day.

The time required to respond to a customer order is known as

lead time.

The practice of achieving high levels of customer service with a minimal inventory investment is known as ____ manufacturing.

lean

The long-term relationship between inventory, throughput, and flow time is mathematically related using ______'s law.

little

A map showing the flow of materials through a manufacturing system is known as a ____-to-____ process map.

make stock

When attempting to balance an assembly-line, the amount of idle time across workstations should be

minimized

If inventory turn is known, days-of-supply is calculated by

multiplying the inverse of inventory turn by 365 days.

In an assemble-to-order system, the total number of unique combinations possible is calculated by

multiplying the number of options for each choice together.

Workcenters are often structured to___________ the movement of material.

optimize

On an assembly-line, the order in which tasks must be performed is called the

precedence relationship

The ____-____ matrix shows when different production process types are used in relation to product volume and standardization.

product process

To determine the required workstation cycle time, an analyst needs to know the ____ _____ per day and the required ____ per day (in units).

production time, output

A production process map is built by

tracking the flow of material through the system.

In a _____ layout, machines are grouped according to type or function and parts travel to the appropriate location for processing.

workcenter


Kaugnay na mga set ng pag-aaral

Ap Environmental Science: Sustainability

View Set

Western Civilization I CLEP Exam (ANSWERS)

View Set

Graphing Functions and Equations

View Set

Agency, Employment, Employment Discrimination L201 Unit 4 (heavily tested on final exam)

View Set

The House on Mango Street Final Exam

View Set

APICS BSCM (4/4): Supply 'Lesson 1' - Aggregate Inventory Mgmt.

View Set