power tools module
Saws with fine blades that are excellent for delicate and intricate cutting are called.
saber saw
The adjustable tools rest on a bench grinder should be positioned.
1/8 inch from the grinder wheel
most hammer drills will not hammer until pressures is.
applied to the drill bit
A power miter saw combines a miter box with a.
circular saw
A grinder can catch on rough material edges and shift around, especially when using rotary bits called
Burr bits
If a pneumatic nailer is not firing properly, before attempting repairs be sure to
Disconnect the air hose
A Porta-Power® is an example of a(n)
Hydraulic tool
When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade's.
Kerf
A power tool that is well suited for breaking up concrete during demolition work is a(n)
Pavement breaker
A good way to check the condition of the grinding wheel on a bench grinder is to
Perform a ring test on the wheel
Special training and certification is required before using any kind
Powder-actuated fastening tool
A low-velocity fastening system that is used to drive steel pins or threaded studs into masonry and steel is a(n)
Powder-actuated tool
Before using a pneumatically powered nailer for the first time, it is important to
Read the manufacturer's instructions
A saw the has a thin, one-piece blade that runs around guides at either end of the saw is a.
bandsaw
Before replacing parts such as bit,blades,or discs on any tool,you must.
disconnect the power source
Never use a circular saw that does not have an upper blade guard because the.
guard protects you from touching the blade.
A angle grinder is used to grind.
hard, heavy materials
Before you plug any saw into the power source make sure the.
power switch is in the off position.
When using power tools,never engage the
trigger lock
A pneumatic drill is commonly used
when there no source of electricity