Quiz 3

What is the defining characteristic of a Newtonian fluid?

A Newtonian fluid is one for which viscosity is a constant property at a given temperature. Most liquids (water, oils) are Newtonian fluids.

What is the difference in melting characteristics between a pure metal element and an alloy metal?

A pure metal element melts at one temperature (the melting point), while most metal alloys begin melting at a certain temperature called the solidus and finally completes the transformation to the molten state at a higher temperature called the liquidus. Between the solidus and liquidus, the alloy is a mixture of solid and liquid.

Tensile testing is not appropriate for hard brittle materials such as ceramics. What is the test commonly used to determine the strength properties of such materials?

A three point bending test is commonly used to test the strength of brittle materials. The test provides a measure called the transverse rupture strength for these materials.

Define density as a material property.

Density is the weight per unit volume of a material.

Why are different hardness tests and scales required?

Different hardness tests and scales are required because different materials possess widely differing hardnesses. A test whose measuring range is suited to very hard materials is not sensitive for testing very soft materials.

The elastic modulus is what ?

Engineering strain e Divided by engineering stress

What is the difference between engineering stress and true stress in a tensile test?

Engineering stress divides the load (force) on the test specimen by the original area; whereas true stress divides the load by the instantaneous area which decreases as the specimen stretches.

What is hardness, and how is it generally tested?

Hardness is defined as the resistance to indentation of a material. It is tested by pressing a hard object (sphere, diamond point) into the test material and measuring the size (depth, area) of the indentation.

State Hooke's law.

Hooke's Law defines the stress strain relationship for an elastic material; where E = a constant of proportionality called the modulus of elasticity.

How does the change in cross sectional area of a test specimen in a compression test differ from its counterpart in a tensile test specimen?

In a compression test, the specimen cross sectional area increases as the test progresses; while in a tensile test, the cross sectional area decreases.

How is shear strength S related to tensile strength TS, on average?

S = 0.7 TS, on average.

Define specific heat as a material property.

Specific heat is defined as the quantity of heat required to raise the temperature of a unit mass of the material by one degree.

Define the recrystallization temperature for a metal.

The recrystallization temperature is the temperature at which a metal recrystallizes (forms new grains) rather than work hardens when deformed.

Define tensile strength of a material.

The tensile strength is the maximum load experienced during the tensile test divided by the original area.

Define yield strength of a material.

The yield strength is the stress at which the material begins to plastically deform. It is usually measured as the 0.2% offset value, which is the point where the stress strain curve for the material intersects a line that is parallel to the straight-line portion of the curve but offset from it by 0.2%.

Define thermal diffusivity.

Thermal conductivity is the capacity of a material to transfer heat energy through itself by thermal movement only (no mass transfer).

What is thermal conductivity as a material property?

Thermal conductivity is the capacity of a material to transfer heat energy through itself by thermal movement only (no mass transfer).

What is the dilemma between design and manufacturing in terms of mechanical properties?

To achieve design function and quality, the material must be strong; for ease of manufacturing, the material should not be strong, in general.

What is viscoelasticity, as a material property?

Viscoelasticity refers to the property most commonly exhibited by polymers that defines the strain of the material as a function of stress and temperature over time. It is a combination of viscosity and elasticity.

Define viscosity of a fluid.

Viscosity is the resistance to flow of a fluid material; the thicker the fluid, the greater the viscosity.

What is work hardening?

Work hardening, also called strain hardening, is the increase in strength that occurs in metals when they are strained.

What are the three types of static stresses to which materials are subjected?

tensile, compressive, and shear.