Science-Light

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

The ______ the wave length, the ________ energy it carries

-shorter, more

Umbra?

darkest part of the shadow, no light reaches this

What do all waves transfer?

energy

Do light waves disturb particles?

no

When a fluorescent light is turned on, what happens?

one electrode heats up and releases electrons

What is the order of the electromagnetic spectrum?

radio waves, microwaves, infrared, visible light, ultraviolet, x-ray, gamma rays

Photoluminescence

the atoms take in electromagnetic energy. Which may then be transformed to a kind of electromagnetic energy with less energy. Atoms may emit the light immediately, a process called fluorescence, or over a period of time, in which case the process is called phosphorescence. Examples: (i) the white glow of fluorescent lights, (ii) glow-in-the-dark toys which absorb ultraviolet or visible light and then emit a specific color of light gradually over a period of time.

Bioluminescent

the production of light by chemical reactions in living organisms Example: fireflies and many deep-sea fish

How does it change into visible light?

the uv light collides with the phosphors in the chemical coating on the outside of the tube

What do those electrons do?

they ionize the gas

How are light waves started?

vibrations of particles

whats a solar eclipse?

what happens when the moon gets between the earth and the sun in a position where the earth is in the moons shadow

Whats a lunar eclipse?

when the earth gets between the moon and the sun, so that the shadow of the earth falls on the moon

Can light travel through empty space?

yes

The shorter the wave, the _____________.

more energy it carries

one part of the ________ affects the behavior of the next part of the ___________.

Medium

Neon lights?

-Ex. open sign -these tubes contain neon, krypton, helium, and argon -this glass in the tube becomes ionized, allowing electricity to go through the gas -This causes some electrons in the gas atoms to jump to a higher energy level -the color depends on which gas is in the tube

Tell me about vapor lamps?

-bulbs contain argon, or neon, gas and sodium -when electricity flows to the bulb, it warms up and the sodium changes to vapor which becomes ionized -after a few min., the vapor turns into yellow light -the human eye is sensitive to yellow light, so it seems brighter than other colors

What are three things that could happen when light hits an object?

-light will be reflected -light will be absorbed -light will be transmitted

LED lights

-made of materials called semiconductors -white light is a combination of of different wave lengths -one LED cannot produce white light -red, blue, and green LEDS are combined, because this is how the light appears through human eyes -price is dropping each year -use less electricity than fluorescent bulbs, are very bright

what happens when light is absorbed?

-the electromagnetic energy changes to other kinds of energy

How is intensity defined?

-the energy per unit of area

How is frequency defined?

-the number of vibrations per second

whats an opaque object?

-this does not allow light to pass through it

Why should people use CFL's?

-uses less electricity (75% less than incandescent) -prevent greenhouse gas emissions that cause global warming -contain less mercury than incandescent

Whats a halogen bulb?

Halogen light bulbs are an improvement on the original light bulb design. A halogen bulb also uses a tungsten filament, but it is encased inside a much smaller container made of quartz. Because the container is so close to the filament, it would melt if it were made from glass. The gas inside the container is also different -- it consists of a gas from the group of gases called halogens. These gases have a very interesting characteristic: They combine with tungsten vapor. If the temperature is high enough, the halogen gas will combine with tungsten atoms as they evaporate and redeposit them on the filament. This recycling process lets the filament last a lot longer. In addition, it is now possible to run the filament hotter, meaning you get more visible light per unit of energy. You still get a lot of heat, though; and because the quartz container is so close to the filament, it is extremely hot compared to a normal light bulb.

What is a wavelength?

The distance between the top part of the wave to the top of the next one

Whats a filament of a lightbulb?

The filament in a light bulb is made of a long, incredibly thin length of tungsten metal. In a typical 60-watt bulb, the tungsten filament is about 6.5 feet (2 meters) long but only one-hundredth of an inch thick. The tungsten is arranged in a double coil in order to fit it all in a small space. That is, the filament is wound up to make one coil, and then this coil is wound to make a larger coil. In a 60-watt bulb, the final coil is less than an inch long.

How is amplitude defined?

The maximum displacement from the center of the wave

What happened when the electrons flow through the atoms mercury?

The mercury atoms produce ultraviolet light

Whats the problem with that approach?

The problem with this approach is the evaporation of the tungsten atoms. At such extreme temperatures, some of the tungsten atoms vibrate with enough energy to detach from the atoms around them and go into the air. This is evaporation. As more and more atoms evaporate, the filament starts to disintegrate. The evaporated atoms are carried upwards by convection currents in the gas and are deposited on the glass which starts to get darker. Eventually the filament is too thin and it breaks.

How do waves begin?

With a disturbance

Whats a thin beam of light called?

a ray

Mechanoluminescence

atoms gain energy from mechanical changes such as rubbing the material or deforming it Example: wint-o-green lifesavers produce blue sparks when you bite on them

Electroluminescent

atoms get energy from an electrical current Examples: LEDs and neon lights used in advertising signs

Chemiluminescence

atoms get energy from chemical reactions Example: glow in the dark bracelets which you snap to mix the chemicals and start the reaction.

If the frequency of the wave is ________ it transfers more energy.

higher

What does the speed of the wave describe?

how fast the disturbance is moving through the medium

how could you only see a shadow?

if there is a screen behind it

Explain a fluorescent light bulb.

it consists of sealed glass coated with chemicals called phosphors. The tube is filled with mercury vapor and argon gas at low pressure. At each end of the tube there are electrodes with tungsten filaments.

what happens when an object lets less than 100% of the light pass through?

it creates a shadow!

What does the amplitude of a wave determine?

its intensity

what is an incandescent light source?

light is produced by a hot object

what is an luminescent light source?

light is produced without the need for heating

penumbra?

lighter outer section


Kaugnay na mga set ng pag-aaral

MindTap Module 6: Security and Safety

View Set

Pain Management During labor and Birth

View Set

AP U.S. History The Constitution and Ratification

View Set

Activity 2-2 Television Production Staff and Crew

View Set