TN375: Chapters 10-13 Test Study Guide

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

A network administrator is required to upgrade wireless access to end users in a building. To provide data rates up to 1.3 Gb/s and still be backward compatible with older devices, which wireless standard should be implemented? 802.11n 802.11ac 802.11g 802.11b

802.11ac

What two IEEE 802.11 wireless standards operate only in the 5 GHz range? (Choose two.) 802.11g 802.11ad 802.11ac 802.11a 802.11n 802.11b

802.11ac 802.11a

Which access control component, implementation, or protocol is based on device roles of supplicant, authenticator, and authentication server? accounting authentication authorization 802.1X

802.1X

Which access control component, implementation, or protocol restricts LAN access through publicly accessible switch ports? 802.1X authorization accounting authentication

802.1X

Which access control component, implementation, or protocol audits what users actions are performed on the network? Accounting Authorization Authentication 802.1X

Accounting

On a Cisco 3504 WLC dashboard, which option provides access to the full menu of features? Access Points Network Summary Advanced Rogues

Advanced

A technician is about to install and configure a wireless network at a small branch office. What is the first security measure the technician should apply immediately upon powering up the wireless router? Enable MAC address filtering on the wireless router Configure encryption on the wireless router and the connected wireless devices Change the default user-name and password of the wireless router Disable the wireless network SSID broadcast

Change the default user-name and password of the wireless router

What is an advantage of SSID cloaking?​ Clients will have to manually identify the SSID to connect to the network It is the best way to secure a wireless network SSIDs are very difficult to discover because APs do not broadcast them It provides free Internet access in public locations where knowing the SSID is of no concern

Clients will have to manually identify the SSID to connect to the network

A technician is troubleshooting a slow WLAN and decides to use the split-the-traffic approach. Which two parameters would have to be configured to do this? (Choose two) Configure the 5 GHz band for streaming multimedia and time sensitive traffic Configure the security mode to WPA Personal TKIP/AES for one network and WPA2 Personal AES for the other network Configure the 2.4 GHz band for basic internet traffic that is not time sensitive Configure the security mode to WPA Personal TKIP/AES for both networks Configure a common SSID for both split networks

Configure the 5 GHz band for streaming multimedia and time sensitive traffic Configure the 2.4 GHz band for basic internet traffic that is not time sensitive

Which two Cisco solutions help prevent DHCP starvation attacks? (Choose two.) DHCP Snooping IP Source Guard Dynamic ARP Inspection Port Security Web Security Appliance

DHCP Snooping Port Security

Which Layer 2 attack will result in legitimate users not getting valid IP addresses? ARP spoofing DHCP starvation IP address spoofing MAC address flooding

DHCP starvation

What represents a best practice concerning discovery protocols such as CDP and LLDP on network devices? Enable CDP on edge devices, and enable LLDP on interior devices Use the open standard LLDP rather than CDP Use the default router settings for CDP and LLDP Disable both protocols on all interfaces where they are not required

Disable both protocols on all interfaces where they are not required

What mitigation plan is best for thwarting a DoS attack that is creating a MAC address table overflow? Disable DTP Disable STP Enable port security Place unused ports in an unused VLAN

Enable port security

What are three techniques for mitigating VLAN attacks? (Choose three) Enable trunking manually Disable DTP Enable Source Guard Set the native VLAN to an unused VLAN Use private VLANs Enable BPDU guard

Enable trunking manually Disable DTP Set the native VLAN to an unused VLAN

A laptop cannot connect to a wireless access point. Which two troubleshooting steps should be taken first? (Choose two) Ensure that the correct network media is selected Ensure that the laptop antenna is attached Ensure that the wireless NIC is enabled Ensure that the wireless SSID is chosen Ensure that the NIC is configured for the proper frequency

Ensure that the wireless NIC is enabled Ensure that the wireless SSID is chosen

A network administrator is configuring DAI on a switch with the command ip arp inspection validate src-mac . What is the purpose of this configuration command? It checks the source MAC address in the Ethernet header against the user-configured ARP ACLs It checks the source MAC address in the Ethernet header against the MAC address table It checks the source MAC address in the Ethernet header against the sender MAC address in the ARP body It checks the source MAC address in the Ethernet header against the target MAC address in the ARP body

It checks the source MAC address in the Ethernet header against the sender MAC address in the ARP body

A network administrator is configuring a RADIUS server connection on a Cisco 3500 series WLC. The configuration requires a shared secret password. What is the purpose for the shared secret password? It is used by the RADIUS server to authenticate WLAN users It is used to authenticate and encrypt user data on the WLAN It is used to encrypt the messages between the WLC and the RADIUS server It allows users to authenticate and access the WLAN

It is used to encrypt the messages between the WLC and the RADIUS server

Which statement describes the behavior of a switch when the MAC address table is full? It treats frames as unknown unicast and floods all incoming frames to all ports on the switch It treats frames as unknown unicast and floods all incoming frames to all ports across multiple switches It treats frames as unknown unicast and floods all incoming frames to all ports within the local VLAN It treats frames as unknown unicast and floods all incoming frames to all ports within the collision domain

It treats frames as unknown unicast and floods all incoming frames to all ports within the local VLAN

What is the result of a DHCP starvation attack? The attacker provides incorrect DNS and default gateway information to clients The IP addresses assigned to legitimate clients are hijacked Clients receive IP address assignments from a rogue DHCP server Legitimate clients are unable to lease IP addresses

Legitimate clients are unable to lease IP addresses

A network administrator is working to improve WLAN performance on a dual-band wireless router. What is a simple way to achieve a split-the-traffic result? Add a Wi-Fi range extender to the WLAN and set the AP and the range extender to serve different bands Check and keep the firmware of the wireless router updated Make sure that different SSIDs are used for the 2.4 GHz and 5 GHz bands Require all wireless devices to use the 802.11n standard

Make sure that different SSIDs are used for the 2.4 GHz and 5 GHz bands

A network administrator deploys a wireless router in a small law firm. Employee laptops join the WLAN and receive IP addresses in the 10.0.10.0/24 network. Which service is used on the wireless router to allow the employee laptops to access the internet? DHCP RADIUS DNS NAT

NAT

Which service can be used on a wireless router to prioritize network traffic among different types of applications so that voice and video data are prioritized over email and web data? QoS DNS DHCP NAT

QoS

A network administrator of a college is configuring the WLAN user authentication process. Wireless users are required to enter username and password credentials that will be verified by a server. Which server would provide such service? AAA NAT RADIUS SNMP

RADIUS

Which two commands can be used to enable BPDU guard on a switch? (Choose two.) S1(config)# spanning-tree bpduguard default S1(config-if)# spanning-tree portfast bpduguard S1(config)# spanning-tree portfast bpduguard default S1(config-if)# enable spanning-tree bpduguard S1(config-if)# spanning-tree bpduguard enable

S1(config)# spanning-tree portfast bpduguard default S1(config-if)# spanning-tree bpduguard enable

Which protocol can be used to monitor the network? DHCP SNMP RADIUS AAA

SNMP

Which protocol should be used to mitigate the vulnerability of using Telnet to remotely manage network devices? SNMP TFTP SSH SCP

SSH

A company has recently implemented an 802.11n wireless network. Some users are complaining that the wireless network is too slow. Which solution is the best method to enhance the performance of the wireless network? Disable DHCP on the access point and assign static addresses to the wireless clients Upgrade the firmware on the wireless access point Split the traffic between the 2.4 GHz and 5 GHz frequency bands Replace the wireless NICs on the computers that are experiencing slow connections

Split the traffic between the 2.4 GHz and 5 GHz frequency bands

A technician is troubleshooting a slow WLAN that consists of 802.11b and 802.11g devices . A new 802.11n/ac dual-band router has been deployed on the network to replace the old 802.11g router. What can the technician do to address the slow wireless speed? Split the wireless traffic between the 802.11n 2.4 GHz band and the 5 GHz band Update the firmware on the new router Configure devices to use a different channel Change the SSID

Split the wireless traffic between the 802.11n 2.4 GHz band and the 5 GHz band

What are two protocols that are used by AAA to authenticate users against a central database of usernames and password? (Choose two.) SSH HTTPS TACACS+ RADIUS CHAP NTP

TACACS+ RADIUS

Which type of VLAN-hopping attack may be prevented by designating an unused VLAN as the native VLAN? DHCP spoofing DHCP starvation VLAN double-tagging DTP spoofing

VLAN double-tagging

On a Cisco 3504 WLC Summary page ( Advanced > Summary ), which tab allows a network administrator to access and configure a WLAN for a specific security option such as WPA2? MANAGEMENT WIRELESS WLANs SECURITY

WLANs

Which three Cisco products focus on endpoint security solutions? (Choose three.) IPS Sensor Appliance Web Security Appliance Email Security Appliance SSL/IPsec VPN Appliance Adaptive Security Appliance NAC Appliance

Web Security Appliance Email Security Appliance NAC Appliance

The company handbook states that employees cannot have microwave ovens in their offices. Instead, all employees must use the microwave ovens located in the employee cafeteria. What wireless security risk is the company trying to avoid? improperly configured devices rogue access points accidental interference interception of data

accidental interference

Which access control component, implementation, or protocol collects and reports usage data? accounting authentication authorization 802.1X

accounting

Which access control component, implementation, or protocol logs EXEC and configuration commands configured by a user? authentication authorization 802.1X accounting

accounting

Which component of AAA allows an administrator to track individuals who access network resources and any changes that are made to those resources? authentication accounting accessibility authorization

accounting

While attending a conference, participants are using laptops for network connectivity. When a guest speaker attempts to connect to the network, the laptop fails to display any available wireless networks. The access point must be operating in which mode? mixed passive active open

active

Which access control component, implementation, or protocol controls who is permitted to access a network? authorization 802.1X accounting authentication

authentication

Which access control component, implementation, or protocol is based upon usernames and passwords? 802.1X accounting authentication authorization

authentication

Which access control component, implementation, or protocol is implemented either locally or as a server-based solution? authorization 802.1X accounting authentication

authentication

Which access control component, implementation, or protocol controls what users can do on the network? accounting 802.1X authorization authentication

authorization

Which access control component, implementation, or protocol indicates success or failure of a client-requested service with a PASS or FAIL message? accounting authentication 802.1X authorization

authorization

Which component of AAA is used to determine which resources a user can access and which operations the user is allowed to perform? accounting authentication auditing authorization

authorization

Which type of management frame may regularly be broadcast by an AP? authentication probe request probe response beacon

beacon

What is a wireless security mode that requires a RADIUS server to authenticate wireless users? personal shared key enterprise WEP

enterprise

Which wireless network topology would be used by network engineers to provide a wireless network for an entire college building? ad hoc hotspot infrastructure mixed mode

infrastructure

Which authentication method stores usernames and passwords in the router and is ideal for small networks? server-based AAA over TACACS+ local AAA over RADIUS server-based AAA local AAA over TACACS+ local AAA server-based AAA over RADIUS

local AAA

What type of wireless antenna is best suited for providing coverage in large open spaces, such as hallways or large conference rooms? Yagi omnidirectional dish directional

omnidirectional

What security benefit is gained from enabling BPDU guard on PortFast enabled interfaces? preventing buffer overflow attacks preventing rogue switches from being added to the network protecting against Layer 2 loops enforcing the placement of root bridges

preventing rogue switches from being added to the network

A network administrator is configuring port security on a Cisco switch. The company security policy specifies that when a violation occurs, packets with unknown source addresses should be dropped and no notification should be sent. Which violation mode should be configured on the interfaces? off restrict protect shutdown

protect

What are the two methods that are used by a wireless NIC to discover an AP? (Choose two.) delivering a broadcast frame receiving a broadcast beacon frame initiating a three-way handshake sending an ARP request transmitting a probe request

receiving a broadcast beacon frame transmitting a probe request

An IT security specialist enables port security on a switch port of a Cisco switch. What is the default violation mode in use until the switch port is configured to use a different violation mode? shutdown disabled restrict protect

shutdown

As part of the new security policy, all switches on the network are configured to automatically learn MAC addresses for each port. All running configurations are saved at the start and close of every business day. A severe thunderstorm causes an extended power outage several hours after the close of business. When the switches are brought back online, the dynamically learned MAC addresses are retained. Which port security configuration enabled this? auto secure MAC addresses dynamic secure MAC addresses static secure MAC addresses sticky secure MAC addresses

sticky secure MAC addresses

Which feature on a switch makes it vulnerable to VLAN hopping attacks? the mixed duplex mode enabled for all ports by default the limited size of content-addressable memory space mixed port bandwidth support enabled for all ports by default the automatic trunking port feature enabled for all ports by default

the automatic trunking port feature enabled for all ports by default

What device is considered a supplicant during the 802.1X authentication process? the router that is serving as the default gateway the authentication server that is performing client authentication the client that is requesting authentication the switch that is controlling network access

the client that is requesting authentication

Which feature or configuration on a switch makes it vulnerable to VLAN double-tagging attacks? the limited size of content-addressable memory space the automatic trunking port feature enabled for all ports by default the native VLAN of the trunking port being the same as a user VLAN mixed duplex mode enabled for all ports by default

the native VLAN of the trunking port being the same as a user VLAN

A technician is configuring the channel on a wireless router to either 1, 6, or 11. What is the purpose of adjusting the channel? to enable different 802.11 standards to avoid interference from nearby wireless devices to disable broadcasting of the SSID to provide stronger security modes

to avoid interference from nearby wireless devices

True or False: In the 802.1X standard, the client attempting to access the network is referred to as the supplicant true false

true

Which type of wireless network is based on the 802.11 standard and a 2.4-GHz or 5-GHz radio frequency? wireless metropolitan-area network wireless wide-area network wireless local-area network wireless personal-area network

wireless local-area network

Which type of wireless network is suitable for use in a home or office? wireless wide-area network wireless personal-area network wireless local-area network wireless metropolitan-area network

wireless local-area network

Which type of wireless network is suitable for providing wireless access to a city or district? wireless wide-area network wireless personal-area network wireless local-area network wireless metropolitan-area network

wireless metropolitan-area network

Which type of wireless network often makes use of devices mounted on buildings? wireless local-area network wireless metropolitan-area network wireless personal-area network wireless wide-area network

wireless metropolitan-area network

Which type of wireless network uses transmitters to provide wireless service over a large urban region? wireless wide-area network wireless personal-area network wireless metropolitan-area network wireless local-area network

wireless metropolitan-area network

Which three parameters would need to be changed if best practices are being implemented for a home wireless AP? (Choose three.) wireless client operating system password antenna frequency wireless network password wireless beacon time AP password SSID

wireless network password AP password SSID

Which type of wireless network commonly uses Bluetooth or ZigBee devices? wireless wide-area network wireless personal-area network wireless local-area network wireless metropolitan-area network

wireless personal-area network

Which type of wireless network uses low powered transmitters for a short-range network, usually 20 to 30 ft. (6 to 9 meters)? wireless metropolitan-area network wireless personal-area network wireless local-area network wireless wide-area network

wireless personal-area network

Which type of wireless network is suitable for national and global communications? wireless metropolitan-area network wireless local-area network wireless personal-area network wireless wide-area network

wireless wide-area network

Which type of wireless network uses transmitters to provide coverage over an extensive geographic area? wireless metropolitan-area network wireless local-area network wireless personal-area network wireless wide-area network

wireless wide-area network

What is the function provided by CAPWAP protocol in a corporate wireless network? CAPWAP creates a tunnel on Transmission Control Protocol (TCP) ports in order to allow a WLC to configure an autonomous access point CAPWAP provides the encapsulation and forwarding of wireless user traffic between an access point and a wireless LAN controller CAPWAP provides connectivity between an access point using IPv6 addressing and a wireless client using IPv4 addressing CAPWAP provides the encryption of wireless user traffic between an access point and a wireless client

CAPWAP provides the encapsulation and forwarding of wireless user traffic between an access point and a wireless LAN controller

Which step is required before creating a new WLAN on a Cisco 3500 series WLC? Create a new SSID Build or have an SNMP server available Build or have a RADIUS server available Create a new VLAN interface

Create a new VLAN interface

A network administrator is configuring DAI on a switch with the command ip arp inspection validate src-mac. What is the purpose of this configuration command? It checks the source MAC address in the Ethernet header against the user-configured ARP ACLs It checks the source MAC address in the Ethernet header against the MAC address table It checks the source MAC address in the Ethernet header against the sender MAC address in the ARP body It checks the source MAC address in the Ethernet header against the target MAC address in the ARP body

It checks the source MAC address in the Ethernet header against the sender MAC address in the ARP body

A network engineer is troubleshooting a newly deployed wireless network that is using the latest 802.11 standards. When users access high bandwidth services such as streaming video, the wireless network performance is poor. To improve performance the network engineer decides to configure a 5 Ghz frequency band SSID and train users to use that SSID for streaming media services. Why might this solution improve the wireless network performance for that type of service? Requiring the users to switch to the 5 GHz band for streaming media is inconvenient and will result in fewer users accessing these services The 5 GHz band has more channels and is less crowded than the 2.4 GHz band, which makes it more suited to streaming multimedia The 5 GHz band has a greater range and is therefore likely to be interference-free The only users that can switch to the 5 GHz band will be those with the latest wireless NICs, which will reduce usage

The 5 GHz band has more channels and is less crowded than the 2.4 GHz band, which makes it more suited to streaming multimedia


Kaugnay na mga set ng pag-aaral

Programming Logic and Design, Chapters 11-13 & 15

View Set

WSET Level 1 - Module 1. What is wine and how is it made?

View Set

Chapter 15 [15.2c Cerebrospinal Fluid]

View Set

VOC SCIENCE POLITIQUE avec Baudouï

View Set

McTighe ch. 51 Reproductive System

View Set

chap 10 stream erosion and river systems

View Set

Health Assessment Chapter 14 Hair Skin and Nails LabManual

View Set

Weight Training Biomechanics and Kinesiology Terms

View Set