Water Safety Course Chp. 3
What should you do before starting an inboard gasoline engine? 1. Operate the blower for at least four minutes 2. Prime the fuel pump 3. Open all doors and windows 4. Close the fuel shut-off valve
1. Operate the blower for at least four minutes
In many states, trailers with a GVWR of 1,500 pounds or greater are required by law to have what equipment? 1. Electric winch 2. Brakes 3. Guide rollers 4. Bunks
2. Brakes
Where should non-essential passengers stand during the fueling process? 1. Bow 2. Cabin 3. Ashore 4. Cockpit
3. Ashore
What is an important step in the fueling process? 1. Aligning the helm to center 2. Raising the engine out of the water 3. Ensuring electrical switches are off 4. Checking the holding tank capacity
3. Ensuring electrical switches are off
Which of the following is recommended as part of the annual maintenance program for a gasoline-powered boat? 1. Drain and check bilge along with topping off the anti-freeze level 2. Examination of thru-hull fittings for signs of leakage or corrosion 3. Calibration and re-installation of an automotive-type fuel pump 4. Change the spark plugs with automotive plugs and check spark distance
3.Examination of thru-hull fittings for signs of leakage or corrosion.
Trailer ratings are based on what? 1. The type of boat they are designed to carry 2. The length and width of the trailer 3. The type of hitch they use 4. The total weight of the trailer and boat
4. The total weight of the trailer and boat
