2-22 ws2016

You want to install a group of 25 computers using disk images created in conjunction with the System Preparation Tool. Your plan is to create an image from a reference computer and then copy the image to all the machines. You do not want to create an SID on the destination computer when you use the image. Which Sysprep.exe command-line option should you use to set this up? A. /specialize B. /generalize C. /oobe D. /quiet

/generalize option prevents system-specific information from being included in the image

What is the maximum number of nodes that can participate in a Windows Server 2016 NLB single cluster? A. 32 B. 4 C. 16 D. 64

32

What is the default TCP port for iSCSI? A. 3260 B. 1433 C. 21 D. 3389

3260

You are the administrator for a large organization that wants to implement site-aware clustering. What two PowerShell commands would you use to help you set up site-aware clustering? A. (Get-Cluster).CrossSiteDelay = B. (Get-Cluster).CrossSiteThreshold = C. (Add-Cluster).CrossSiteDelay = D. (Add-Cluster).CrossSiteThreshold =

A. (Get-Cluster).CrossSiteDelay = B. (Get-Cluster).CrossSiteThreshold =

You are the network administrator for a large training company. You have been asked to set up the default gateway setting using DHCP. Which option would you configure? A. 003 Router B. 006 DNS C. 015 DNS Domain Name D. 028 Broadcast Address

A. 003 Router

What are the minimum CPU requirements for running Hyper-V on a machine? (Choose all that apply.) A. An x64-based processor (Intel or AMD). B. Hardware Data Execution Protection (DEP) must be enabled. C. Hardware-assisted virtualization must be enabled. D. The processor must at least have a dual core.

A. An x64-based processor (Intel or AMD). B. Hardware Data Execution Protection (DEP) must be enabled. C. Hardware-assisted virtualization must be enabled.

You are the network administrator for Stellacon Corporation. Stellacon has a Windows Server 2016 machine that needs to be able to communicate with all computers on the internal network. Stellacon has decided to add 15 new segments to its IPv6 network. How would you configure the IPv6 so that the server can communicate with all the segments? A. Configure the IPv6 address as fd00::2b0:e0ff:dee9:4143/8. B. Configure the IPv6 address as fe80::2b0:e0ff:dee9:4143/32. C. Configure the IPv6 address as ff80::2b0:e0ff:dee9:4143/64. D. Configure the IPv6 address as fe80::2b0:e0ff:dee9:4143/64.

A. Configure the IPv6 address as fd00::2b0:e0ff:dee9:4143/8.

You are the administrator of a large company and you need to ensure that you can recover your Windows Server 2016 Active Directory configuration and data if the computer's hard disk fails. What should you do? A. Create a complete PC Backup and Restore image. B. Create a backup of all file categories. C. Perform an Automated System Recovery (ASR) backup. D. Create a system restore point

A. Create a complete PC Backup and Restore image.

You are the administrator for your organization, which has started using containers. You need to build and use a Dockerfile. You need to execute commands within the Dockerfile. What command would you use? A. Docker run B. Docker rm C. Docker build D. Docker compile

A. Docker run

. You need to install Microsoft Baseline Security Analyzer. How do you need to do the install? A. Download MBSA from Microsoft's website. B. Install from Server Manager. C. Use Add/Remove Programs. D. Programs

A. Download MBSA from Microsoft's website.

Your company consists of a single Active Directory forest. You have a Windows Server 2016 domain controller that also has the DNS role installed. You also have a Unix-based DNS server at the same location. You need to configure your Windows DNS server to allow zone transfers to the Unix-based DNS server. What should you do? A. Enable BIND secondaries. B. Configure the Unix machine as a stub zone. C. Convert the DNS server to Active Directory Integrated. D. Configure the Microsoft DNS server to forward all requests to the Unix DNS server.

A. Enable BIND secondaries.

As an administrator, you need to create highly available storage spaces that connect to directly attached storage on the hosts. Which PowerShell command would you use? A. Enable-ClusterStorageSpacesDirect B. Set-StoragePool C. Add-ClusterDisk D. Update-ClusterVirtualMachineConfiguration

A. Enable-ClusterStorageSpacesDirect

1. You are the administrator for a mid-size organization. You have been asked by the owner to set up a NLB cluster. You want to use PowerShell to set up the cluster. What command would you use? A. New-NlbCluster B. Create-NlbCluster C. Setup-NlbCluster D. Set-NlbCluster

A. New-NlbCluster

You are the network administrator for your company. You want to look at some of the resources on the network. Specifically, you want to watch the CPU and Memory. Which tool can you use to get the most detailed information about the resources? A. Performance Monitor B. System Hardware Monitor C. Event Viewer D. Server Manager

A. Performance Monitor

. Which of the following applications would be better suited on a failover cluster instead of a network load-balanced cluster? (Choose all that apply.) A. SQLServer B. Website C. Exchange Mailbox Server D. VPN services

A. SQLServer C. Exchange Mailbox Server

Andy wants to change the memory of a virtual machine that is currently powered up. What does he need to do? A. Shut down the virtual machine, use the virtual machine's settings to change the memory, and start it again. B. Use the virtual machine's settings to change the memory. C. Pause the virtual machine, use the virtual machine's settings to change the memory, and resume it. D. Save the virtual machine, use the virtual machine's settings to change the memory, and resume it.

A. Shut down the virtual machine, use the virtual machine's settings to change the memory, and start it again.

You are the network administrator for your organization and you want to stop virtual machine replication. What PowerShell command would you use? A. Stop-VMReplication B. Terminate-VMReplication C. Kill-VMReplication D. Drainstop-VMReplication

A. Stop-VMReplication

7. You are the administrator for a mid-size company who wants to set up and test a cluster. What PowerShell command would you use to run a validation test on a cluster? A. Test-Cluster B. Validate-Cluster C. Set-Cluster D. Add-Cluster

A. Test-Cluster

On what operating systems can you install the Hyper-V Manager MMC? (Choose all that apply.) A. Windows Server 2012 R2 B. Windows Server 2003 C. Windows 10 D. Windows 7, Windows 8

A. Windows Server 2012 R2 Windows 10 D. Windows 7, Windows 8

You are the network administrator for a company that has decided to start using Windows Containers. You want to create a new container. What command allows you to create a container? A. docker create B. docker build container C. docker new D. docker build

A. docker create

You are the network administrator for a company that has decided to start using Windows Containers. You have created some images. What command allows you to see your images? A. docker images B. docker info C. docker view D. docker see

A. docker images

You are the network administrator for a Fortune 500 company. You are responsible for all client computers at the central campus. You want to make sure that all of the client computers are secure. You decide to use MBSA to scan your client computers for possible security violations. You want to use the command-line version of MBSA to scan your computers based on IP address. Which of the following commands should you use? A. mdsacli.exe /hf -i xxxx.xxxx.xxxx.xxxx B. mdsacli.exe /ip xxxx.xxxx.xxxx.xxxx C. mbsa.exe /hf -ip xxxx.xxxx.xxxx.xxxx D. mbsa.exe /ip xxxx.xxxx.xxxx.xxxx

A. mdsacli.exe /hf -i xxxx.xxxx.xxxx.xxxx

You are the network administrator for Stormwind Corporation. Stormwind has two trees in its Active Directory forest, Stormwind.com and abc.com. Company policy does not allow DNS zone transfers between the two trees. You need to make sure that when anyone in abc.com tries to access the Stormwind.com domain, all names are resolved from the Stormwind.com DNS server. What should you do? A. Create a new secondary zone in abc.com for Stormwind.com. B. Configure conditional forwarding on the abc.com DNS server for Stormwind.com. C. Create a new secondary zone in Stormwind.com for abc.com. D. Configure conditional forwarding on the Stormwind.com DNS server for abc.com

B. Configure conditional forwarding on the abc.com DNS server for Stormwind.com.

You are the network administrator for the ABC Company. Your network consists of two DNS servers named DNS1 and DNS2. The users who are configured to use DNS2 complain because they are unable to connect to Internet websites. The following table shows the configuration of both servers. DNS1 DNS2 _msdcs.abc.comabc.com .(root)_msdcs.abc.comabc.com The users connected to DNS2 need to be able to access the Internet. What needs to be done? A. Build a new Active Directory Integrated zone on DNS2. B. Delete the .(root) zone from DNS2, and configure conditional forwarding on DNS2. C. Delete the current cache.dns file. D. Update your cache.dns file and root hints.

B. Delete the .(root) zone from DNS2, and configure conditional forwarding on DNS2.

You are the network administrator for your organization. A new company policy states that all inbound DNS queries need to be recorded. What can you do to verify that the IT department is compliant with this new policy? A. Enable Server Auditing - Object Access. B. Enable DNS debug logging. C. Enable server database query logging. D. Enable DNS Auditing - Object Access.

B. Enable DNS debug logging.

You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1? A. Find-ServerPackage B. Get-Package C. Find-Package D. Get-WindowsOptionalFeature

B. Get-Package

Your manager has decided that your organization needs to use an Active Directory application data partition. Which command can you use to create and manage application data partitions? A. DCPromo.exe B. NTDSUtil.exe C. ADUtil.exe D. ADSI.exe

B. NTDSUtil.exe

Rich bought a new server with an Itanium IA-64 processor, 4 GB RAM, and a SAN that provides 1 TB hard disk space. After installing Windows Server 2016 for Itanium-based systems, he wants to install Hyper-V on this server. Can Hyper-V be installed on this system? A. Yes B. No

B. No

What command-line command would you type to start Performance Monitor? A. Netmon.exe B. Perfmon.exe C. Performon.exe D. Resmon.exe

B. Perfmon.exe

You are the network administrator for a large organization. You need to watch some of the main components on a server. These include the Memory, CPU, Network, and Disk. What utility can you use to get a quick overview of these four components? A. System Monitor B. Resource Monitor C. System Configuration D. Event Viewer

B. Resource Monitor

You are the network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2016. All client computers run Windows 10. The company has 16 mobile sales representatives who are all members of the Power Users local group on their computers. From 6 p.m. until 7 a.m., the sales representatives' laptops are usually turned off and disconnected from the corporate network. The mobile sales representatives' computers must receive software updates every day with minimal user interaction. While verifying the recent updates on one of the laptops, you notice that the updates from the Windows Update servers were not applied. On the Automatic Updates tab of the System Properties dialog box of the mobile computer, what should you do to make sure that software updates are applied to the computer? (Choose three.) A. Set the scheduled time to every day at 12 a.m. B. Select the option Automatically Download The Updates, And Install Them On The Schedule That I Specify. C. Select the option Notify Me Before Downloading Any Updates And Notify Me Again Before Installing Them On My Computer. D. Select the Keep My Computer Up To Date check box. E. Select the option Download The Updates Automatically And Notify Me When They Are Ready To Be Installed. F. Set the scheduled time to every day at 12 p.m

B. Select the option Automatically Download The Updates, And Install Them On The Schedule That I Specify D. Select the Keep My Computer Up To Date check box. F. Set the scheduled time to every day at 12 p.m.

You are the administrator of a mid-size network. You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named Virtual1. Virtual1 has resource metering enabled. You need to use resource metering to track the amount of network traffic that Virtual1 sends to the 10.10.16.0/20 network. Which command would you run?

B. Set-VMNetworkAdapter

. If you have a running cluster and need to run the Validate a Configuration Wizard again, which of the following tests may require cluster resources to be taken offline? A. Network tests B. Storage tests C. System configuration tests D. Inventory tests

B. Storage tests

You ask one of your technicians to get the IPv6 address of a new Windows Server 2016 machine, and she hands you a note with FE80::0203:FFFF:FE11:2CD on it. What can you tell from this address? (Choose two.) A. This is a globally unique IPv6 address. B. This is a link-local IPv6 address. C. This is a multicast IPv6 address. D. In EUI-64 format, you can see the MAC address of the node. E. In EUI-64 format, you can see the IPv4 address of the node.

B. This is a link-local IPv6 address. D. In EUI-64 format, you can see the MAC address of the node.

1. You are the network administrator for a Fortune 500 company. You are responsible for all client computers at the central campus. You want to make sure that all of the client computers have the most current software installed for their operating systems, including software in the categories Critical Updates and Service Packs, Windows Server 2016 Family, and Driver Updates. You want to automate the process as much as possible, and you want the client computers to download the updates from a central server that you are managing. You decide to use Windows Server Update Services. The WSUS server software has been installed on a server called WSUSServer. You want to test the WSUS server before you set up group policies within the domain. You install Windows 10. Which of the following Registry entries needs to be made for the client to specify that the client should use WSUSServer for Windows Update? (Choose all that apply.) A. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU\UseWUServer and specify 0 data. B. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU\UseWUServer and specify 1 for data. C. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU\WUServer and specify http://WSUSServer. D. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU\WUServer and specify WSUSServer. E. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\WUServer and specify http://WSUSServer. F. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\WUServer and specify WSUSServer.

B. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU\UseWUServer and specify 1 for data. E. Use HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\WUServer and specify http://WSUSServer.

. On which of the following x64 editions of Windows Server 2016 does Hyper-V run? (Choose all that apply.) A. Windows Server 2016 Web Edition B. Windows Server 2016 Standard Edition C. Windows Server 2016 Itanium Edition D. Windows Server 2016 Datacenter Edition

B. Windows Server 2016 Standard Edition D. Windows Server 2016 Datacenter Edition

You are the administrator for your organization, which has started using containers. You need to build a new image using Windows Server Core. What command would you use to get a Windows Server Core image? A. Docker run microsoft/windowsservercore B. docker pull microsoft/windowsservercore C. Docker build microsoft/windowsservercore D. Docker get microsoft/windowsservercore

B. docker pull microsoft/windowsservercore

You are the network administrator for a large company that has one main site and one branch office. Your company has a single Active Directory forest, ABC.com. You have a single domain controller (ServerA) in the main site that has the DNS role installed. ServerA is configured as a primary DNS zone. You have decided to place a domain controller (ServerB) in the remote site and implement the DNS role on that server. You want to configure DNS so that, if the WAN link fails, users in both sites can still update records and resolve any DNS queries. How should you configure the DNS servers? A. Configure ServerB as a secondary DNS server. Set replication to occur every 5 minutes. B. Configure ServerB as a stub zone. C. Configure ServerB as an Active Directory Integrated zone, and convert ServerA to an Active Directory Integrated zone. D. Convert ServerA to an Active Directory Integrated zone, and configure ServerB as a secondary zone

C. Configure ServerB as an Active Directory Integrated zone, and convert ServerA to an Active Directory Integrated zone

You are the network administrator for a midsize computer company. You have a single Active Directory forest, and you have a requirement to implement DHCP for the organization. You need to ensure that your DHCP deployment configuration is both fault tolerant and redundant. Out of the options provided, which is the most reliable DHCP configuration that you could implement? A. DHCP split scope B. DHCP multicast scope C. DHCP failover D. DHCP super scope

C. DHCP failover

You are the administrator for your organization, which has started using containers. You need to build and use a Dockerfile. You need to compile and create an image using the Dockerfile. What command would you use? A. Docker run B. Docker rm C. Docker build D. Docker compile

C. Docker build

You have a Windows Server 2016 server named Server. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do? A. Use the New-NetFirewallRulecmdlet. B. Use the View-ServiceWindows PowerShell cmdlet. C. Edit the daemon.json file. D. Create a new configuration file.

C. Edit the daemon.json file.

You need to back up the existing data on a computer before you install a new application. You also need to ensure that you are able to recover individual user files that are replaced or deleted during the installation. What should you do? A. Create a System Restore point. B. Perform an Automated System Recovery (ASR) backup and restore. C. In the Windows Server Backup utility, click the Backup Once link. D. In the Backup And Restore Center window, click the Back Up Computer button.

C. In the Windows Server Backup utility, click the Backup Once link.

You want to build a test environment based on virtual machines on a single Windows Server 2016 machine, but you also want to make sure the virtual machines communicate with only each other. What type of virtual network do you need to configure? A. External B. Internal only C. Private virtual machine network D. Public virtual machine network

C. Private virtual machine network

8. You are the network administrator for a company that has decided to start using Windows Containers. You want to delete a container. What PowerShell command allows you to delete a container? A. docker delete B. docker kill container C. Remove-Container D. Delete-docker-Container

C. Remove-Container

Your IT team has been informed by the compliance team that they need copies of the DNS Active Directory Integrated zones for security reasons. You need to give the Compliance department a copy of the DNS zone. How should you accomplish this goal? A. Run dnscmd /zonecopy. B. Run dnscmd /zoneinfo. C. Run dnscmd /zoneexport. D. Run dnscmd /zonefile.

C. Run dnscmd /zoneexport.

. You are the administrator of a new Windows Server 2016 machine. You need to install WSUS. From where do you install WSUS? A. Add/Remove Programs B. Programs C. Server Manager D. Administrative Tools

C. Server Manager

3. You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2016. Windows Server Update Services (WSUS) is installed on two servers, SERVERA and SERVERB. SERVERA receives software updates from Microsoft Windows Update servers. You manually synchronized SERVERB with the Windows Update servers, and now you need to complete the WSUS configuration on SERVERB. Which of the following is not a step you might take to complete the configuration of WSUS on SERVERB? A. Approve the current updates. B. Set SERVERB to receive updates from SERVERA and automatically synchronize with approved updates on SERVERA. C. Set SERVERB to draw updates automatically from whichever sources SERVERA is set to draw from. D. Set SERVERB to receive daily updates automatically at a given time

C. Set SERVERB to draw updates automatically from whichever sources SERVERA is set to draw from

Users who are connecting to an NLB cluster through the Internet are complaining that they keep connecting to different NLB nodes in different locations. You want to keep Internet users connecting to the same NLB members each time they connect. What should you do to fix the problem?

C. Set the cluster affinity to Class C.

You are the network administrator for your organization. You need to configure the settings of an existing IPv4 scope. What PowerShell cmdlet would you use? A. Set-DhcpServerScope B. Set-Serverv4Scope C. Set-DhcpServerv4Scope D. Set-DhcpScope

C. Set-DhcpServerv4Scope

You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1. Which cmdlet should you use? A. Set-NetNeighbor B. Remove-VMSwitchTeamMember C. Set-VMSwitch D. Enable-VMSwitchExtension

C. Set-VMSwitch

You are the administrator for an organization that has started using Hyper-V. You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named Earth. You need to make sure that you can use nested virtualization on Earth. What should you run on Server1?

C. The Set-VMProcessor cmdlet

What statement is correct for an external virtual network? A. The virtual machines can communicate with each other and with the host machine. B. The virtual machines can communicate with each other only. C. The virtual machines can communicate with each other, with the host machine, and with an external network. D. The virtual machines cannot communicate with each other.

C. The virtual machines can communicate with each other, with the host machine, and with an external network.

You are the network administrator for a mid-size organization that has installed Windows Server 2016 onto the network. You are thinking of moving all machines to Windows 10 and IPv6. You decide to set up a test environment with four subnets. What type of IPv6 addresses do you need to set up? A. Global addresses B. Link-local addresses C. Unique local addresses D. Site-local addresses

C. Unique local addresses

6. While setting up WSUS, you need to configure the server from which you will be getting your Microsoft updates. Under which option would you set this up? A. Products And Classifications B. Update Files And Languages C. Update Source And Proxy Server D. Synchronization Schedule

C. Update Source And Proxy Server

How do you add a physical disk to a virtual machine? A. Use the Virtual Hard Disk Wizard. B. Use the Edit Virtual Hard Disk Wizard. C. Use the virtual machine's settings. D. Use the New Virtual Machine Wizard.

C. Use the virtual machine's settings.

You have been asked to start using Windows containers in your organization. Your manager wants to know what client operating systems can host containers. Which of the following client operating systems will allow for containers? A. Windows 10 Home B. Windows 7 Professional C. Windows 10 Enterprise (Anniversary Edition) D. Windows 8.1 Enterprise

C. Windows 10 Enterprise (Anniversary Edition)

. Will is the network manager for a large company. He has been tasked with creating a deployment plan to automate installations for 100 computers that need to have Windows Server 2016 installed. Will wants to use WDS for the installations. To fully automate the installations, he needs to create an answer file. Will does not want to create the answer files with a text editor. What other program can he use to create unattended answer files via a GUI interface? A. Image Capture Wizard B. Answer Manager C. Windows System Image Manager D. System Preparation Tool

C. Windows System Image Manager is used to create unattended answer files in Windows Server 2016. It uses a GUI-based interface to set up and configure the most common options that are used within an answer file.

What is the command to install Hyper-V on a Windows Server 2016 machine that was installed in Server Core? A. start /w ocsetup Hyper-V B. start /w ocsetup microsoft-hyper-v C. start /w ocsetup Microsoft-Hyper-V D. start /w ocsetup hyper-v

C. start /w ocsetup Microsoft-Hyper-V

You are the network administrator for ABC Company. You have an IPv6 prefix of 2001:DB8:BBCC:0000::/53, and you need to set up your network so that your IPv6 addressing scheme can handle 1,000 more subnets. Which network mask would you use? A. /60 B. /61 C. /62 D. /63 E. /64

D. /63

What is the maximum number of nodes that can participate in a Windows Server 2016 failover cluster? A. 2 B. 4 C. 16 D. 64

D. 64

You have decided to split the DHCP scope between two DHCP servers. What is the recommended split that Microsoft states that you should use? A. 50/50 B. 60/40 C. 70/30 D. 80/20

D. 80/20

You are responsible for managing several Windows Server 2016 domain controller computers in your environment. Recently, a single hard disk on one of these machines failed, and the Active Directory database was lost. You want to perform the following tasks: Determine which partitions on the server are still accessible. Restore as much of the system configuration (including the Active Directory database) as possible. Which of the following could be used to help meet these requirements? A. Event Viewer B. Performance Monitor C. A hard disk from another server that is not configured as a domain controller D. A valid system state backup from the server

D. A valid system state backup from the server

1. You need to stop an application from running in Task Manager. Which tab would you use to stop an application from running? A. Performance B. Users C. Options D. Details

D. Details

You are the network administrator for a company that has decided to start using Windows Containers. You have built a bunch of containers. What PowerShell command allows you to view the containers? A. docker view B. docker see C. View-Container D. Get-Container

D. Get-Container

You are working on a Windows Server 2016 Datacenter Server system. You need to view which roles and services are installed on the machine. Which PowerShell cmdlet can you use to see this? A. Get-event B. New-event C. Trace-command D. Get-WindowsFeature

D. Get-WindowsFeature

2. You are the administrator for your company. You have an application named AppA. AppA is distributed in a multitenant setup across multiple Hyper-V virtual machines. You need to ensure that the traffic is distributed evenly among the virtual machines that host AppA. What should you include in the environment? A. Router and Windows Server Network Load Balancing (NLB) nodes B. Router and Windows Server Software Load Balancing (SLB) nodes C. RAS Gateway and Windows Server Network Load Balancing (NLB) nodes D. RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

D. RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

What command-line command would you type to start Resource Monitor? A. Netmon.exe B. Perfmon.exe C. Performon.exe D. Resmon.exe

D. Resmon.exe

Users who are connecting to an NLB cluster have been complaining that after using the site for a few minutes they are prompted to log in using their username. What should you do to fix the problem and retain scalability? A. Create a port rule to allow only ports 80 and 443. B. Set the cluster affinity to None. C. Set the filtering mode to Single Host. D. Set the cluster affinity to Single.

D. Set the cluster affinity to Single.

You are the network administrator for a Windows Server 2016 network. You have multiple remote locations connected to your main office by slow satellite links. You want to install DNS into these offices so that clients can locate authoritative DNS servers in the main location. What type of DNS servers should be installed in the remote locations? A. Primary DNS zones B. Secondary DNS zones C. Active Directory Integrated zones D. Stub zones

D. Stub zones

Suppose that Alpha and Omega have identically sized working-age populations but that annual hours of work are much greater in Alpha than in Omega.You are the network administrator for your organization. You have a reference computer that runs Windows Server 2016. You need to create and deploy an image of the Windows Server 2016 computer. You create an answer file named answer.xml. You have to make sure that the installation applies the answer file after you deploy the image. Which command should you run before you capture the image? A. ICD.exe /append answer.xml/check B. ICD.exe /mount answer.xml/verify C. Sysprep.exe/reboot/audit/unattend:answer.xml D. Sysprep.exe/generalize/oobe/unattend:answer.xml

D. Sysprep.exe/generalize/oobe/unattend:answer.xml

0. You need to disconnect a user running applications on a server. Which application can you use to disconnect a user currently connected to the server? A. System Information B. Resource Monitor C. Performance Monitor D. Task Manager

D. Task Manager

You need to view which users are running applications on a server. Which application can you use to see what users are currently connected to the server? A. System Information B. Resource Monitor C. Performance Monitor D. Task Manager

D. Task Manager

6. You are the admin for a mid-size company. You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a dynamically expanding virtual hard disk (VHD) file that is 950 GB. The VHD currently contains around 450 GB of free space. You want to reduce the amount of disk space used by the VHD. What command should you run?

D. The Optimize-VHD cmdlet

You are an administrator who has set up two Hyper-V servers named Server1 (Windows Server 2016) and Server2 (Windows Server 2012 R2). Each Hyper-V server has multiple network cards. Each network card is connected to a different TCP/IP subnet. Server1 contains a dedicated migration network. Server2 contains a virtual machine named VM1. You plan to perform a live migration of VM1 to Server1. You need to ensure that Server1 uses all of the available networks to perform the live migration of VM1. What should you run to complete this task?

D. The Set-VMHost cmdlet

You are the administrator of a large organization. While setting up your Windows Server 2016 domain controller, you are creating a data recovery strategy that must meet the following requirements: Back up all data files and folders in C:\Data. Restore individual files and folders in C:\Data. Ensure that data is backed up to and restored from external media. What should you do? A. Use the Previous Versions feature to restore the files and folders. B. Use the System Restore feature to perform backup and restore operations. C. Use the NTBackup utility to back up and restore individual files and folders. D. Use the Windows Server Backup to back up and restore files.

D. Use the Windows Server Backup to back up and restore files.

You are the network administrator for a company that has a Windows Server 2016 Hyper-V failover cluster. This cluster contains two nodes named ServerA and ServerB. On ServerA, you create a virtual machine named VirtualMachineA by using Hyper-V Manager. You need to configure VirtualMachineA to move to ServerB automatically if ServerA becomes unavailable. What should you do? A. In the Failover Cluster manager, run the configure Role actions. B. In the Hyper-V Manager, click VirtualMachineA and click Enable Replication. C. In the Hyper-V Manager, click ServerA and modify the hyper-V settings. D. Using Windows PowerShell, run the Enable-VMReplication cmdlet

D. Using Windows PowerShell, run the Enable-VMReplication cmdlet.

You have a Nano Server named Nano1. You deploy several containers to Nano1 that use an image named Image1. You need to deploy a new container to Nano1 that uses Image1. What should you run? A. Install-NanoServerPackage cmdlet B. Install-WindowsFeaturecmdlet cmdlet C. docker load D. docker run

D. docker run

What command would be used to register an iSCSI initiator manually to an iSNS server? A. iscsicli refreshisnsserver server_name B. iscsicli listisnsservers server_name C. iscsicli removeisnsserver server_name D. iscsicli addisnsserver server_name

D. iscsicli addisnsserver server_name

You are the network administrator for a small company with two DNS servers: DNS1 and DNS2. Both DNS servers reside on domain controllers. DNS1 is set up as a standard primary zone, and DNS2 is set up as a secondary zone. A new security policy was written stating that all DNS zone transfers must be encrypted. How can you implement the new security policy? A. Enable the Secure Only setting on DNS1. B. Enable the Secure Only setting on DNS2. C. Configure Secure Only on the Zone Transfers tab for both servers. D. Delete the secondary zone on DNS2. Convert both DNS servers to use Active Directory Integrated zones

Delete the secondary zone on DNS2. Convert both DNS servers to use Active Directory Integrated zones.

Which of the following actions should be performed against an NLB cluster node if maintenance needs to be performed while not terminating current connections? A. Evict B. Drainstop C. Pause D. Stop

Drainstop

You want to make sure the hard disk space for your virtual machines is occupied only when needed. What type of virtual hard disk would you recommend? A. Dynamically expanding disk B. Fixed-size disk C. Differencing disk D. Physical or pass-through disk

Dynamically expanding disk

True or False? You can load DHCP on a Nano Server. A. True B. False

False

2. You have a Windows Server 2016 Hyper-V host named Jupiter. You want to deploy several shielded virtual machines on Jupiter. You deploy a Host Guardian on a new server. You need to view the process of the shielded virtual machines installation. What should you run to see the progress of the shielded VM? A. Get-ShieldedVMProvisioningStatus cmdlet B. the Diskpart command C. the Set-VHD cmdlet D. the Set-VM cmdlet

Get-ShieldedVMProvisioningStatus cmdlet

What is the mechanism that is used in clustering to see if a node is online or if the node is not responding? A. Testbeat B. Heartbeat C. Testnode D. Pulse

Heartbeat

You are the network administrator for an organization with two servers. The servers are named Server1 and Server2. Server2 is a DHCP server. You want Server1 to help lease addresses for Server2. You add the DHCP role to Server1. What should you do next? A. In the DHCP console, run the Configure Failover Wizard. B. In the DHCP console, run the Configure Zone Wizard. C. On Server2, set the DHCP role to Enabled. D. On Server1, start the Share Zone Information Wizard.

In the DHCP console, run the Configure Failover Wizard.

You are responsible for DNS in your organization. You look at the DNS database and see a large number of older records on the server. These records are no longer valid. What should you do? A. In the zone properties, enable Zone Aging and Scavenging. B. In the server properties, enable Zone Aging and Scavenging. C. Manually delete all the old records. D. Set Dynamic Updates to None.

In the zone properties, enable Zone Aging and Scavenging

You have been hired as a consultant to research a network-related problem at a small organization. The environment supports many custom-developed applications that are not well documented. A manager suspects that some computers on the network are generating excessive traffic and bogging down the network. You want to do the following: Determine which computers are causing the problems. Record and examine network packets that are coming to/from specific machines. View data related only to specific types of network packets. What tool should you use to accomplish all of the requirements? A. Task Manager B. Performance Monitor C. Event Viewer D. Microsoft Message Analyzer

Microsoft Message Analyzer

. In a three-node cluster set to a Node Majority quorum model, how many cluster nodes can be offline before the quorum is lost? A. Zero B. One C. Two D. Three

One

2. You have a Windows Server 2016 Windows Image (WIM) that is mounted. You need to display information about the image. What should you do? A. Run DISM and specify the /get-ImageInfo parameter. B. Run Driverquery.exe and use the /si parameter. C. From Device Manager, view all hidden drivers. D. From Windows Explorer, open the mount folder.

Run DISM and specify the /get-ImageInfo parameter

You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named NodeA and NodeB. On NodeA, you create a virtual machine named VM01 by using HyperV Manager. You need to configure VM01 to move to NodeB automatically if NodeA becomes unavailable. What should you do? A. In the Failover Cluster manager, configure Role actions. B. In the Hyper-V Manager, click VM01 and click Enable Replication. C. In the Hyper-V Manager, click NodeA and modify the Hyper-V settings. D. Run the PowerShell command Enable-VMReplication

Run the PowerShell command Enable-VMReplication

You are the network administrator for a mid-size computer company. You have a single Active Directory forest, and your DNS servers are configured as Active Directory Integrated zones. When you look at the DNS records in Active Directory, you notice that there are many records for computers that do not exist on your domain. You want to make sure only domain computers register with your DNS servers. What should you do to resolve this issue? A. Set dynamic updates to None. B. Set dynamic updates to Nonsecure And Secure. C. Set dynamic updates to Domain Users Only. D. Set dynamic updates to Secure Only

Set dynamic updates to Secure Only.

Which of the following actions should be performed against an NLB cluster node if maintenance needs to be performed and all connections must be terminated immediately? A. Evict B. Drainstop C. Pause D. Stop

Stop

You run a training department that needs the same software installed from scratch on the training computers each week. You decide to use Image Capture Wizard to deploy disk images. Which Windows Server 2016 utility can you use in conjunction with Image Capture Wizard to create these disk images? A. UAF B. Answer Manager C. Setup Manager D. System Preparation Tool

System Preparation Tool

. You are the network manager of XYZ Corporation. You are in charge of developing an automated deployment strategy for rolling out new Windows Server 2016 computers. You want to install a WDS server and are evaluating whether an existing server can be used as a WDS server for Windows Server 2016 deployment. Which of the following is not a requirement for configuring the WDS server? A. The remote installation folder must be NTFS version 3.0 or later. B. The remote installation folder must reside on the system partition. C. RIS must be installed on the server. D. The existing server must run Windows Server 2003 with Service Pack 1 installed.

The remote installation folder must reside on the system partition.

In a four-node cluster set to a Node And File Share Majority quorum model, how many votes can be lost before a quorum is lost? A. One B. Two C. Three D. Four

Two

To configure an NLB cluster with unicast, what is the minimum number of network adapters required in each node? A. One B. Two C. Three D. Six

Two

You are trying to decide whether you want to use WDS as a method of installing Windows Server 2016 within your company. Which of the following options is not an advantage to using a WDS automated installation? A. The Windows Server 2016 security is retained when you restart the computer. B. Windows Server 2016 installation media does not need to be deployed to each computer. C. Unique information is stripped out of the installation image so that it can be copied to other computers. D. You can quickly recover the operating system in the event of a system failure.

Unique information is stripped out of the installation image so that it can be copied to other computers.

. You are planning on deploying a new Windows Server 2016 image to 100 client computers that are similarly configured. You are using the Windows SIM tool to create an answer file that will be used to automate the installation process. You want each computer to contain two partitions, one for the system partition and one that will function as a data partition. You need to modify the answer file to support this configuration. Which component of the answer file will you need to modify? A. oobeSystem B. auditSystem C. Windows PE D. specialize

Windows PE component of the answer file. The options specified in this configuration pass will occur before the image will be copied to the local computer

You are a network technician for your company, and you need to deploy Windows Server 2016 to multiple computers. You want to automate the installation of Windows Server 2016 so that no user interaction is required during the installation process. Which of the following utilities could you use? A. Windows SIM B. Image Capture Wizard C. System Preparation Tool D. WDSUTIL

Windows SIM

You want to initiate a new installation of Windows Server 2016 from the command line. You plan to accomplish this by using the Setup.exe command-line setup utility. You want to use an answer file with this command. Which command-line option should you use? A. /unattend B. /apply C. /noreboot D. /generalize

e /unattend option can be used with the Setup.exe command to initiate an unattended installation of Windows Server 2016. You should also specify the location of the answer file to use when using the Setup.exe utility