accounting 202 chapter 3

Rockville, Inc., which uses a job-costing system, began business on January 1, 20x3 and applies manufacturing overhead on the basis of direct-labor cost. The following information relates to 20x3: ● Budgeted direct labor and manufacturing overhead were anticipated to be $200,000 and $250,000, respectively. ● Job nos. 1, 2, and 3 were begun during the year and had the following charges for direct material and direct labor: Job No. Direct Materials Direct Labor 1 $145,000 $35,000 2 320,000 65,000 3 55,000 80,000 ● Job nos. 1 and 2 were completed and sold on account to customers at a profit of 60% of cost. Job no. 3 remained in production. ● Actual manufacturing overhead by year-end totaled $233,000. Rockville adjusts all under- and overapplied overhead to cost of goods sold. Required: A. Compute the company's predetermined overhead application rate. B. Compute Rockville's ending work-in-process inventory. C. Determine Rockville's sales revenue. D. Was manufacturing overhead under- or overapplied during 20x3? By how much? E. Present the necessary journal entry to handle under- or overapplied manufacturing overhead at year-end. F. Does the presence of under- or overapplied overhead at year-end indicate that Rockville's accountants made a serious error? Briefly explain

A. $250,000 ÷ $200,000 = 125% of direct labor cost B. Job no. 3: Direct material $ 55,000 Direct labor 80,000 Manufacturing overhead ($80,000 x 125%) 100,000 Total cost of job no. 3 $235,000 C. Job nos. 1 and 2: Direct material ($145,000 + $320,000) $465,000 Direct labor ($35,000 + $65,000) 100,000 Manufacturing overhead ($100,000 x 125%) 125,000 Total cost of job nos. 1 and 2 $690,000 Sales revenue: $1,104,000 ($690,000 x 160%) D. Actual overhead $233,000 Applied overhead: [($35,000 + $65,000 + $80,000) x 125%] 225,000 Underapplied overhead $ 8,000 E. Cost of Goods Sold 8,000 Manufacturing Overhead 8,000 F. No. Companies use a predetermined application rate for several reasons, including the fact that manufacturing overhead is not easily traced to jobs and products. The predetermined rate is based on estimates of both overhead and an appropriate cost driver, and situations where these amounts coincide precisely with actual experiences are rare. As a result, under- or overapplied overhead typically arises at year-end.

Athens Corporation uses a job-cost system and applies manufacturing overhead to products on the basis of machine hours. The company's accountant estimated that overhead and machine hours would total $800,000 and 50,000, respectively, for 20x1. Actual costs incurred follow. Direct material used $250,000 Direct labor 300,000 Manufacturing overhead 816,000 The manufacturing overhead figure presented above excludes $27,000 of sales commissions incurred by the firm. An examination of job-cost records revealed that 18 jobs were sold during the year at a total cost of $2,960,000. These goods were sold to customers for $3,720,000. Actual machine hours worked totaled 51,500, and Athens adjusts under- or overapplied overhead at year-end to Cost of Goods Sold. Required: A. Determine the company's predetermined overhead application rate. B. Determine the amount of under- or overapplied overhead at year-end. Be sure to indicate whether overhead was under- or overapplied. C. Compute the company's cost of goods sold. D. What alternative accounting treatment could the company have used at year-end to adjust for under- or overapplied overhead? Is the alternative that you suggested appropriate in this case? Why?

A. $800,000 ÷ 50,000 = $16 per machine hour B. Applied overhead (51,500 x $16) $ 824,000 Actual overhead 816,000 Overapplied overhead $ 8,000 C. Cost of goods sold, as reported $2,960,000 Less: Overapplied overhead 8,000 Cost of goods sold, adjusted $2,952,000 D. The company could have allocated the overapplication to work in process, finished goods, and cost of goods sold. Although this method is acceptable, it is not suggested in this case because of the immaterial dollar amount in relation to cost of goods sold.

A review of the records of Milgrim, Inc., a new company, disclosed the following year-end information: ● Manufacturing Overhead account: Contained debits of $872,000, which included $20,000 of sales commissions. ● Work-in-Process Inventory account: Contained charges for overhead of $875,000. ● Cost-of-Goods-Sold account: Contained a year-end debit balance of $3,680,000. This amount was computed prior to any year-end adjustment for under- or overapplied overhead. Milgrim applies manufacturing overhead to production by using a predetermined rate of $20 per machine hour. Budgeted overhead for the period was anticipated to be $900,000. Required: A. Determine the actual manufacturing overhead for the year. B. Determine the amount of manufacturing overhead applied to production. C. Is overhead under- or overapplied? By how much? D. Compute the adjusted cost-of-goods-sold figure that should be disclosed on the company's income statement. E. How many machine hours did Milgrim actually work during the year? F. Compute budgeted machine hours for the year.

A. $872,000 - $20,000 sales commissions = $852,000 B. $875,000 (given) C. Manufacturing overhead is overapplied by $23,000 ($875,000 - $852,000). D. Cost of goods sold $3,680,000 Less: Overapplied overhead 23,000 Cost of goods sold, adjusted $3,657,000 E. Milgrim would have applied overhead to production by using the actual machine hours worked and the $20 application rate. Thus, the actual hours worked total 43,750 ($875,000 ÷ $20). F. $900,000 ÷ $20 = 45,000 hours

Kent Products uses a predetermined overhead application rate of $18 per labor hour. A review of the company's accounting records revealed budgeted manufacturing overhead for the period of $621,000, applied manufacturing overhead of $590,400, and overapplied overhead of $11,900. Required: A. Determine Kent's actual labor hours, budgeted labor hours, and actual manufacturing overhead. B. Present the necessary year-end journal entry to handle the overapplied overhead, assuming that the firm allocates over- or underapplied overhead to Cost of Goods Sold.

A. Actual labor hours: $590,400 ÷ $18 per hour = 32,800 hours Budgeted labor hours: $621,000 ÷ $18 per hour = 34,500 hours Actual manufacturing overhead: $590,400 - $11,900 = $578,500 B. Manufacturing Overhead 11,900 Cost of Goods Sold 11,900

Fine & Associates is an interior decorating firm in Tucson. The following costs were incurred in a project to redecorate the mayor's offices: Direct material $ 29,000 Direct professional labor 42,000 The firm's budget for the year included the following estimates: Budgeted overhead $800,000 Budgeted direct professional labor 640,000 Overhead is applied to contracts by using a predetermined overhead rate that is based on direct professional labor cost. Actual professional labor during the year was $655,000 and actual overhead was $793,000. Required: A. Determine the total cost to redecorate the mayor's offices. B. Calculate the under- or overapplied overhead for the year. Be sure to label your answer.

A. Direct material $ 29,000 Direct professional labor 42,000 Applied overhead ($42,000 x 125%*) 52,500 Total cost to redecorate $123,500 *$800,000 ÷ $640,000 = 125% B. Applied overhead ($655,000 x 125%) $818,750 Actual overhead 793,000 Overapplied overhead $ 25,750

Packard Products uses a job-costing system for its units, which pass from the Machining Department, to the Assembly Department, to finished-goods inventory. The Machining Department is heavily automated; in contrast, the Assembly Department performs a number of manual-assembly activities. The following information relates to the Machining Department for the year just ended: Budgeted manufacturing overhead $8,000,000 Actual manufacturing overhead 7,975,000 Budgeted machine hours 500,000 Actual machine hours 510,000 The Machining Department data that follow pertain to job no. 243, the only job in production at year-end. Direct materials $64,800 Direct labor cost 35,200 Machine hours 450 Required: A. Assuming the use of normal costing, calculate the predetermined overhead rate that is used in the Machining Department. B. Compute the cost of the Machining Department's year-end work-in-process inventory. C. Determine whether overhead was under- or overapplied during the year in the Machining Department. D. If Packard disposes of the Machining Department's under- or overapplied overhead as an adjustment to Cost of Goods Sold, would the company's Cost-of-Goods-Sold account increase or decrease? Explain. E. How much overhead would have been charged to the Machining Department's Work-in-Process account during the year? F. Comment on the appropriateness of direct labor cost to apply manufacturing overhead in the Assembly Department.

A. Machining overhead rate: $8,000,000 ÷ 500,000 hours = $16 per machine hour B. The ending work in process is carried at a cost of $107,200, computed as follows: Direct materials $ 64,800 Direct labor 35,200 Manufacturing overhead (450 x $16) 7,200 Total cost $107,200 C. Actual overhead in the Machining Department amounted to $7,975,000, whereas applied overhead totaled $8,160,000 (510,000 hours x $16). Thus, overhead was overapplied by $185,000 during the year. D. The department's manufacturing overhead was overapplied by $185,000. As a result of this situation, excessive overhead flowed from Work in Process, to Finished Goods, to Cost of Goods Sold, meaning that the Cost-of-Goods-Sold account must be decreased at year-end. E. The Work-in-Process account is charged with applied overhead, or $8,160,000. F. The firm's selection of application bases is likely appropriate. The bases should "drive" the costs, meaning there should be a strong cause-and-effect relationship between the base that is used and the amount of overhead incurred. In the Assembly Department, a considerable portion of the overhead incurred is related to manual-assembly (i.e., labor) operations.

Manufacturing overhead is applied to production. A. Describe several situations that may give rise to underapplied overhead. B. Assume that underapplied manufacturing overhead is treated as an adjustment to Cost of Goods Sold. Explain why an underapplication of overhead increases Cost of Goods Sold.

A. Overhead will be underapplied when total actual overhead costs exceed applied overhead. This can occur for a variety of reasons including underestimation of some overhead costs, incorrect estimation of the application base and/or production, or changes in the mix of products that affect the level of overhead costs incurred. B. In most manufacturing environments, many products made during the period are also sold and ending work in process is modest relative to the amount of goods manufactured. Therefore the vast majority of the overhead applied to the Work-in-Process Inventory account will flow through Finished-Goods Inventory and on to Cost of Goods Sold. However, if overhead is underapplied, Cost of Goods Sold has been increased by an insufficient amount. Consequently, the underapplied overhead should be added to Cost of Goods Sold.

63. Brickman Corporation, which began operations on January 1 of the current year, reported the following information: Estimated manufacturing overhead $ 600,000 Actual manufacturing overhead 639,000 Estimated direct labor cost 480,000 Actual direct labor cost 500,000 Total debits in the Work-in-Process account 1,880,000 Total credits in the Finished-Goods account 920,000 Brickman applies manufacturing overhead to jobs on the basis of direct labor cost and adds a 60% markup to the cost of completed production when finished goods are sold. On December 31, job no. 18 was the only job that remained in production. That job had direct-material and direct-labor charges of $16,500 and $36,000, respectively. Required: A. Determine the company's predetermined overhead rate. B. Determine the amount of under- or overapplied overhead. Be sure to label your answer. C. Compute the amount of direct materials used in production. D. Calculate the balance the company would report as ending work-in-process inventory. E. Prepare the journal entry(ies) needed to record Brickman's sales, which are all made on account.

A. Predetermined overhead rate: $600,000 ÷ $480,000 = 125% of direct labor cost B. Actual manufacturing overhead ($639,000) - applied overhead ($500,000 x 125% = $625,000) = $14,000 underapplied C. Total debits to Work-in-Process ($1,880,000) - direct labor ($500,000) - applied overhead ($625,000) = direct materials used ($755,000) D. The only job in production is job no. 18, which has direct material of $16,500 and direct labor of $36,000. Applied overhead amounts to $45,000 ($36,000 x 125%), yielding a total job cost of $97,500 ($16,500 + $36,000 + $45,000). E. The company's cost of goods sold equals $920,000, resulting in sales revenues of $1,472,000 ($920,000 x 160%). Thus: Accounts Receivable 1,472,000 Sales Revenue 1,472,000 Cost of Goods Sold 920,000 Finished-Goods Inventory 920,000

Dexter Corporation, which uses a job costing system, had two jobs in process at the start of 20x1: job no. 59 ($95,000) and job no. 60 ($39,500). The following information is available: ● The company applies manufacturing overhead on the basis of machine hours. Budgeted overhead and machine activity for the year were anticipated to be $720,000 and 20,000 hours, respectively. ● The company worked on three jobs during the first quarter. Direct materials used, direct labor incurred, and machine hours consumed were: Job No. Direct Material Direct Labor Machine Hours 59 $18,000 $45,000 900 60 ---- 25,000 600 61 37,000 35,000 1,200 ● Manufacturing overhead during the first quarter included charges for depreciation ($20,000), indirect labor ($50,000), indirect materials used ($4,000), and other factory costs ($108,700). ● Dexter completed job no. 59 and job no. 60. Job no. 59 was sold for cash, producing a profit of $24,600 for the firm. Required: A. Determine the company's predetermined overhead application rate. B. Prepare journal entries as of March 31 to record the following. (Note: Use summary entries where appropriate by combining individual job data.) 1. The issuance of direct material to production, and the direct labor incurred. 2. The manufacturing overhead incurred during the quarter. 3. The application of manufacturing overhead to production. 4. The completion of job no. 59 and no. 60. 5. The sale of job no. 59.

A. Predetermined overhead rate: $720,000 ÷ 20,000 hours = $36 per machine hour B. 1. Work-in-Process Inventory 55,000* Raw-Material Inventory 55,000 Work-in-Process Inventory 105,000** Wages Payable 105,000 * $18,000 + $37,000 = $55,000 **$45,000 + $25,000 + $35,000 = $105,000 2. Manufacturing Overhead 182,700 Accumulated Depreciation 20,000 Wages Payable 50,000 Manufacturing Supplies Inventory 4,000 Miscellaneous Accounts 108,700 3. Work-in-Process Inventory 97,200* Manufacturing Overhead 97,200 *(900 + 600 + 1,200) x $36 = $97,200 4. Finished-Goods Inventory 276,500* Work-in-Process Inventory 276,500 *No. 59: $95,000 + $18,000 + $45,000 + (900 x $36) = $190,400 No. 60: $39,500 + $25,000 + (600 x $36) = $86,100 5. Cash 215,000* Sales Revenue 215,000 *$190,400 + $24,600 = $215,000 Cost of Goods Sold 190,400 Finished-Goods Inventory 190,400

71. Boswell and Associates designs relatively small sports stadiums and arenas at various sites throughout the country. The firm's accountant prepared the following budget for the upcoming year: Professional staff salaries $3,000,000 Administrative support staff 800,000 Other operating costs 200,000 Eighty percent of professional staff salaries are directly traceable to client projects, a figure that falls to 60% for the administrative support staff and other operating costs. Traceable costs are charged directly to client projects; nontraceable costs, on the other hand, are treated as firm overhead and charged to projects by using a predetermined overhead application rate. Boswell had one project in process at year-end: an arena that was being designed for Charlotte County. Costs directly chargeable to this project were: Professional staff salaries $90,000 Administrative support staff 17,300 Other operating costs 6,700 Required: A. Determine Boswell's overhead for the year and the firm's predetermined overhead application rate. The rate is based on costs directly chargeable to firm projects. B. Compute the cost of the Charlotte County arena project as of year-end. C. Present three examples of "other operating costs" that might be directly traceable to the Charlotte County project.

A. Professional staff salaries $3,000,000 Administrative support staff 800,000 Other operating costs 200,000 Subtotal $4,000,000 Less: Direct costs Professional staff salaries ($3,000,000 x 80%) $2,400,000 Administrative support staff and other costs [($800,000 + $200,000) x 60%] 600,000 3,000,000 Nontraceable costs (i.e., overhead) $1,000,000 Predetermined application rate: $1,000,000 ÷ $3,000,000 = 33.33% B. Professional staff salaries $ 90,000 Administrative support staff 17,300 Other operating costs 6,700 Subtotal $114,000 Overhead: $114,000 x 33.33% 38,000 Total $152,000 C. Possible examples include travel, overnight delivery fees, postage, selected costs related to conducting focus-group studies, photocopying, and supplies related to model construction.

Montgomery, Inc., which uses a job-costing system, is a labor-intensive firm, with many skilled craftspeople on the payroll. Job no. 789 was the only job in process on January 1, having costs of $22,500 as of that date. Direct materials used and direct labor incurred during January were: Job No. Direct Materials Direct Labor 789 $ 2,000 $ 6,000 790 9,000 10,000 791 14,000 8,000 Job no. 791 was the only job in production as of January 31. Required: A. Should Montgomery use direct labor or machine hours as a cost driver. Why? B. Assume that the company decided to use direct labor as its cost driver. If the budgeted amounts of direct labor and manufacturing overhead are anticipated to be $200,000 and $300,000, respectively, what is the firm's predetermined overhead rate? C. Compute the cost of work-in-process inventory as of January 31. D. Compute the cost of jobs completed during January. E. Suppose that the company sold all of its completed jobs, adding a 40% markup to cost. How much would the firm report as sales revenue?

A. The company should use direct labor because it is a labor-intensive firm, with many skilled craftspeople on the payroll. More than likely, a majority of overhead is "driven" by people rather than machine operation. B. $300,000 $200,000 = 150% of direct labor cost C. Direct material $14,000 Direct labor 8,000 Manufacturing overhead ($8,000 x 150%) 12,000 Total cost of job no. 791 $34,000 D. Beginning work in process $22,500 Direct material ($2,000 + $9,000) 11,000 Direct labor ($6,000 + $10,000) 16,000 Manufacturing overhead ($16,000 x 150%) 24,000 Total cost of job nos. 789 and 790 $73,500 E. Sales revenue: $102,900 ($73,500 x 140%)

KLP provides consulting services and uses a job-order system to accumulate the cost of client projects. Traceable costs are charged directly to individual clients; in contrast, other costs incurred by KLP, but not identifiable with specific clients, are charged to jobs by using a predetermined overhead application rate. Clients are billed for directly chargeable costs, overhead, and a markup. KLP anticipates the following costs for the upcoming year: Cost Percentage of Cost Directly Traceable to Clients Professional staff salaries $5,000,000 80% Administrative support staff 600,000 50 Travel 200,000 80 Other operating costs 200,000 20 Total $6,000,000 KLP's partners desire to make a $480,000 profit for the firm and plan to add a percentage markup on total cost to achieve that figure. On May 14, KLP completed work on a project for Lawson Manufacturing. The following costs were incurred: professional staff salaries, $68,000; administrative support staff, $8,900; travel, $10,500; and other operating costs, $2,600. Required: A. Determine KLP's total traceable costs for the upcoming year and the firm's total anticipated overhead. B. Calculate the predetermined overhead rate. The rate is based on total costs traceable to client jobs. C. What percentage of total cost will KLP add to each job to achieve its profit target? D. Determine the total cost of the Lawson Manufacturing project. How much would Lawson be billed for services performed?

A. Traceable costs total $4,500,000, computed as follows: Total Cost Percent Traceable Traceable Cost Professional staff salaries $5,000,000 80% $4,000,000 Administrative support staff 600,000 50 300,000 Travel 200,000 80 160,000 Other operating costs 200,000 20 40,000 Total $6,000,000 $4,500,000 KLP's overhead (i.e., the nontraceable costs) totals $1,500,000 ($6,000,000 - $4,500,000). B. Predetermined overhead rate: $1,500,000 ÷ $4,500,000 = 33.33% C. Target profit percentage: $480,000 ÷ $6,000,000 = 8% D. The total cost of the Lawson Manufacturing project is $120,000, and the billing is $129,600, as follows: Professional staff salaries $ 68,000 Administrative support staff 8,900 Travel 10,500 Other operating costs 2,600 Subtotal $ 90,000 Overhead ($90,000 x 33.33%) 30,000 Total cost $120,000 Markup ($120,000 x 8%) 9,600 Billing to Lawson $129,600

Quartz Products started and finished job no. C19 during June. The job required $15,000 of direct material and 75 hours of direct labor at $12 per hour. The predetermined overhead rate is $16 per direct labor hour. During June, direct materials requisitions for all jobs totaled $149,000; the total direct labor hours and cost were 6,200 hours at $12 per hour; and the total cost of jobs completed was $337,500. All of these figures include data that pertain to job no. C19. Required: A. Prepare journal entries that summarize June's total activity. B. Determine the cost of job no. C19.

A. Work-in-Process Inventory 149,000 Raw-Material Inventory 149,000 Work-in-Process Inventory 74,400 Wages Payable 74,400 Work-in-Process Inventory 99,200 Manufacturing Overhead 99,200 Finished-Goods Inventory 337,500 Work-in-Process Inventory 337,500 B. Direct material $15,000 Direct labor (75 x $12) 900 Manufacturing overhead applied (75 x $16) 1,200 Total cost of job no. C19 $17,100

The use of predetermined overhead application rates results in a trade-off between accuracy and timeliness. Explain what this statement means.

Answer: Predetermined rates are computed by using budgeted (rather than actual) amounts of both manufacturing overhead and cost drivers. Thus, the rate is really an estimate of overhead per "unit" of driver, a rate that can be employed to cost products and jobs as the products and jobs are completed. In addition, such rates may be helpful in decision making. If one desired to focus on actual overhead amounts, the proper rate can be developed only at the conclusion of the period when such amounts become known. In view of this situation, a trade-off arises. Namely, the user is forsaking accuracy (estimated amounts vs. actual amounts) in exchange for the ability to generate more timely accounting information.

Briefly describe the stages used in the two-stage allocation process for assigning overhead costs.

In Stage One (Cost Distribution or Allocation), all manufacturing costs are assigned to departmental overhead centers. For service departments, the related costs are reassigned to the production departments through this process. In Stage Two (Overhead Application), all of the manufacturing costs accumulated in each production department are then assigned to the production jobs that passed through the department

Describe the types of manufacturing environments that would best be suited for (1) job-order costing and (2) process costing. Include two examples of manufacturers that would likely use job-cost systems.

Job-order costing is typically used in manufacturing environments where goods are produced in distinct batches, called jobs. Typically, there are differences among the various jobs produced. In contrast, process costing is used in environments where large numbers of identical product units are manufactured. Two examples of job-costing firms are aircraft and custom-furniture manufacturers.

The selected data that follow relate to the Berger Furniture Company. Direct material purchased $160,000 Direct material used 79,000 Direct labor 170,000 Manufacturing overhead incurred 100,000 Manufacturing overhead applied 90,000 During the year, products costing $310,000 were completed, and products costing $316,000 were sold for $455,000. Required: Prepare journal entries to record the preceding transactions and events.

Raw-Material Inventory 160,000 Accounts Payable 160,000 Work-in-Process Inventory 79,000 Raw-Material Inventory 79,000 Work-in-Process Inventory 170,000 Wages Payable 170,000 Manufacturing Overhead 100,000 Miscellaneous Accounts 100,000 Work-in-Process Inventory 90,000 Manufacturing Overhead 90,000 Finished-Goods Inventory 310,000 Work-in-Process Inventory 310,000 Cost of Goods Sold 316,000 Finished-Goods Inventory 316,000 Accounts Receivable 455,000 Sales Revenue 455,000

Harris, Inc., has just completed job nos. 78 and 79, which were similar in terms of complexity, production processes, and units manufactured. Job no. 78 was manufactured by Joe Barton who earns $14 per hour, whereas job no. 79 was completed by Susan Franklin who earns $20 per hour. If Joe and Susan are equally efficient, would the company be better off using direct labor cost or direct labor hours as the cost driver in its predetermined overhead rate? Briefly explain.

The jobs produced by Barton and Franklin are similar in terms of complexity, production processes, and units manufactured, and both workers are equally efficient. Thus, the amount of overhead incurred on job no. 78 should be relatively the same as that incurred on job no. 79. If direct labor hours are used in the predetermined overhead rate, the overhead applied to the two jobs will be the same, which is good accounting in this case. Conversely, if direct labor cost were used, Susan's job would absorb more overhead because of the higher labor cost—an improper accounting since both jobs incurred the same amount

Discuss the reasons for using applied overhead rather than actual overhead to determine the cost of production jobs.

There are several reasons. First, overhead costs usually bear no direct relationship to individual jobs or products, but must be incurred for the production process to take place. Therefore, it is crucial that overhead be applied to products in order to have a complete picture of manufacturing costs. Second, actual overhead is not known until after the end of the accounting period. The cost of jobs would not be available in a timely fashion if actual overhead costs were used. Finally, overhead costs often vary due to seasonal factors. This variation is not relevant (once a decision has been made to operate through the seasonal factors) to decisions that involve products or pricing in the short term. It is therefore better to use applied overhead to eliminate cost variations from one season to another.

59. In comparison with firms that use plantwide overhead rates and departmental overhead rates, companies that have adopted activity-based costing will typically use: A. more cost pools and more cost drivers. B. more cost pools and fewer cost drivers. C. fewer cost pools and more cost drivers. D. fewer cost pools and fewer cost drivers. E. only one cost pool and one cost driver.

a

A custom-home builder would likely utilize: A. job-order costing. B. process costing. C. mass customization. D. process budgeting. E. joint costing

a

A manufacturing firm produces goods in accordance with customer specifications, commencing production upon receipt of a purchase order. To accumulate the cost of each order, the company would use a: A. job-cost record. B. cost allocation matrix. C. production log. D. overhead sheet. E. manufacturing cost record.

a

Account Debited Amount A. Cost of Goods Sold $175,000 B. Cost of Goods Sold $245,000 C. Finished-Goods Inventory $175,000 D. Finished-Goods Inventory $245,000 E. Sales Revenue $245,000

a

An accountant recently debited Work-in-Process Inventory and credited Manufacturing Overhead. The accountant was: A. applying a predetermined overhead amount to production. B. recognizing receipt of the factory utilities bill. C. recording a year-end adjustment for an insignificant amount of underapplied overhead. D. recognizing actual overhead incurred during the period. E. recognizing the completion of production.

a

As production takes place, all manufacturing costs are added to the: A. Work-in-Process Inventory account. B. Manufacturing-Overhead Inventory account. C. Cost-of-Goods-Sold account. D. Finished-Goods Inventory account. E. Production Labor account.

a

Howard Manufacturing's overhead at year-end was underapplied by $5,800, a small amount given the firm's size. The year-end journal entry to record this amount would include: A. a debit to Cost of Goods Sold. B. a debit to Manufacturing Overhead. C. a debit to Work-in-Process Inventory. D. a credit to Cost of Goods Sold. E. a credit to Work-in-Process Inventory

a

If a company sells goods that cost $70,000 for $82,000, the firm will: A. reduce Finished-Goods Inventory by $70,000. B. reduce Finished-Goods Inventory by $82,000. C. report sales revenue on the balance sheet of $82,000. D. reduce Cost of Goods Sold by $70,000. E. follow more than one of the above procedures.

a

Job no. C12 was completed in November at a cost of $18,500, subdivided as follows: direct material, $3,500; direct labor, $6,000; and manufacturing overhead, $9,000. The journal entry to record this information is: A. Finished-Goods Inventory 18,500 Work-in-Process Inventory 18,500 B. Work-in-Process Inventory 18,500 Finished-Goods Inventory 18,500 C. Work-in-Process Inventory 18,500 Raw-Material Inventory 3,500 Wages Payable 6,000 Manufacturing Overhead 9,000 D. Cost of Goods Sold 18,500 Finished-Goods Inventory 18,500 E. Finished-Goods Inventory 18,500 Cost of Goods Sold 18,500

a

Media, Inc., an advertising agency, applies overhead to jobs on the basis of direct professional labor hours. Overhead was estimated to be $150,000, direct professional labor hours were estimated to be 15,000, and direct professional labor cost was projected to be $225,000. During the year, Media incurred actual overhead costs of $146,000, actual direct professional labor hours of 14,500, and actual direct labor cost of $222,000. By year-end, the firm's overhead was: A. $1,000 underapplied. B. $1,000 overapplied. C. $4,000 underapplied. D. $4,000 overapplied. E. $5,000 underapplied.

a

Metro Corporation uses a predetermined overhead rate of $20 per machine hour. In deriving this figure, the company's accountant used: A. a denominator of budgeted machine hours for the current accounting period. B. a denominator of actual machine hours for the current accounting period. C. a denominator of actual machine hours for the previous accounting period. D. a numerator of budgeted machine hours for the current accounting period. E. a numerator of actual machine hours for the current accounting period.

a

The final step in recognizing the completion of production requires a company to: A. debit Finished-Goods Inventory and credit Work-in-Process Inventory. B. debit Work-in-Process Inventory and credit Finished-Goods Inventory. C. add direct labor to Work-in-Process Inventory. D. add direct materials, direct labor, and manufacturing overhead to Work-in-Process Inventory. E. add direct materials to Finished-Goods Inventory.

a

The following information relates to October: Production supervisor's salary: $2,500 Factory maintenance wages: 250 hours at $8 per hour The journal entry to record the preceding information is: A. Manufacturing Overhead 4,500 Wages Payable 4,500 B. Wages Payable 4,500 Manufacturing Overhead 4,500 C. Work-in-Process Inventory 4,500 Wages Payable 4,500 D. Wages Payable 4,500 Work-in-Process Inventory 4,500 E. Work-in-Process Inventory 2,500 Manufacturing Overhead 2,000 Wages Payable 4,500

a

The journal entry needed to record $5,000 of advertising for Westwood Manufacturing would include: A. a debit to Advertising Expense. B. a credit to Advertising Expense. C. a debit to Manufacturing Overhead. D. a credit to Manufacturing Overhead. E. a debit to Projects-in-Process.

a

The left side of the Manufacturing Overhead account is used to accumulate: A. actual manufacturing overhead costs incurred throughout the accounting period. B. overhead applied to Work-in-Process Inventory. C. underapplied overhead. D. predetermined overhead. E. overapplied overhead.

a

Which of the following statements about materials is false? A. Acquisitions of materials are normally charged to the Purchases account. B. The use of direct materials gives rise to a debit to Work-in-Process Inventory. C. The use of indirect materials gives rise to a debit to Manufacturing Overhead. D. The use of indirect materials gives rise to a credit to Manufacturing Supplies Inventory. E. Direct materials are accounted for in a different manner than indirect materials.

a

58. At the Nassau Advertising Agency, partner and staff compensation cost is a key driver of agency overhead. In light of this fact, which of the following is the correct expression to determine the amount of overhead applied to a particular client job? A. (Budgeted overhead ÷ budgeted compensation) x budgeted compensation cost on the job. B. (Budgeted overhead ÷ budgeted compensation) x actual compensation cost on the job. C. (Budgeted compensation ÷ budgeted overhead) x budgeted compensation cost on the job. D. (Budgeted compensation ÷ budgeted overhead) x actual compensation cost on the job. E. None of the above, because service providers do not apply overhead to jobs.

b

A computer manufacturer recently shipped several laptops to a customer (cost: $25,000) and billed the customer $30,000. Which of the following options correctly expresses the accounts that are debited and credited to record this transaction? A. Debits: Accounts Receivable, Finished-Goods Inventory; credits: Sales Revenue, Cost of Goods Sold. B. Debits: Accounts Receivable, Cost of Goods Sold; credits: Sales Revenue, Finished-Goods Inventory. C. Debits: Sales Revenue, Cost of Goods Sold; credits: Accounts Receivable, Finished-Goods Inventory. D. Debits: Sales Revenue, Finished-Goods Inventory; credits: Accounts Receivable, Cost of Goods Sold. E. Debits: Accounts Receivable; credits: Finished-Goods Inventory, Profit on Sale.

b

A typical job-cost record would provide information about all of the following items related to an order except: A. the cost of direct materials used. B. administrative costs. C. direct labor costs incurred. D. applied manufacturing overhead. E. direct labor hours worked

b

Armada Company applies manufacturing overhead by using a predetermined rate of 150% of direct labor cost. The data that follow pertain to job no. 831: Direct material cost $72,000 Direct labor cost 38,000 If Armada adds a 30% markup on total cost to generate a profit, which of the following choices depicts a portion of the accounting needed to record the sale of job no. 831? Account Debited Amount A. Accounts Receivable $167,000 B. Accounts Receivable $217,100 C. Finished-Goods Inventory $167,000 D. Finished-Goods Inventory $217,100 E. Sales Revenue $217,100

b

Dale Company, which applies overhead at the rate of 190% of direct labor cost, began work on job no. 101 during June. The job was completed in July and sold during August, having accumulated direct material and labor charges of $27,000 and $15,000, respectively. On the basis of this information, the total overhead applied to job no. 101 amounted to: A. $0. B. $28,500. C. $51,300. D. $70,500. E. $79,800.

b

Huxtable charges manufacturing overhead to products by using a predetermined application rate, computed on the basis of machine hours. The following data pertain to the current year: Budgeted manufacturing overhead: $480,000 Actual manufacturing overhead: $440,000 Budgeted machine hours: 20,000 Actual machine hours: 16,000 Overhead applied to production totaled: A. $352,000. B. $384,000. C. $550,000. D. $600,000. E. some other amount.

b

If the amount of effort and attention to products varies substantially throughout a firm's various manufacturing operations, the firm might consider the use of: A. a plant-wide overhead rate. B. departmental overhead rates. C. actual overhead rates instead of predetermined overhead rates. D. direct labor hours to determine the overhead rate. E. machine hours to determine the overhead rate.

b

Longview Corporation recently used $72,000 of direct materials and $3,000 of indirect materials in production activities. The journal entries reflecting these transactions would include: A. a debit to Raw-Material Inventory for $72,000. B. a debit to Manufacturing Overhead for $3,000. C. a credit to Manufacturing Overhead for $3,000. D. a debit to Work-in-Process Inventory for $75,000. E. a debit to Manufacturing Overhead for $75,000.

b

Maher, Inc., applies manufacturing overhead at the rate of $60 per machine hour. Budgeted machine hours for the current period were anticipated to be 80,000; however, a lengthy strike resulted in actual machine hours being worked of only 65,000. Budgeted and actual manufacturing overhead figures for the year were $4,800,000 and $4,180,000, respectively. On the basis of this information, the company's year-end overhead was: A. overapplied by $280,000. B. underapplied by $280,000. C. overapplied by $620,000. D. underapplied by $620,000. E. underapplied by $900,000.

b

Throughout the accounting period, the credit side of the Manufacturing Overhead account is used to accumulate: A. actual manufacturing overhead costs. B. overhead applied to Work-in-Process Inventory. C. overapplied overhead. D. underapplied overhead. E. predetermined overhead.

b

When underapplied or overapplied manufacturing overhead is prorated, amounts can be assigned to which of the following accounts? A. Raw-Material Inventory, Manufacturing Overhead, and Direct Labor. B. Cost of Goods Sold, Work-in-Process Inventory, and Finished-Goods Inventory. C. Work-in-Process Inventory, Raw-Material Inventory, and Cost of Goods Sold. D. Raw-Material Inventory, Finished-Goods Inventory, and Cost of Goods Sold. E. Raw-Material Inventory, Work-in-Process Inventory, and Finished-Goods Inventory

b

Which of the following is the correct method to calculate a predetermined overhead rate? A. Budgeted total manufacturing cost ÷ budgeted amount of cost driver. B. Budgeted overhead cost ÷ budgeted amount of cost driver. C. Budgeted amount of cost driver ÷ budgeted overhead cost. D. Actual overhead cost ÷ budgeted amount of cost driver. E. Actual overhead cost ÷ actual amount of cost driver.

b

Which of the following statements about the use of direct labor as a cost driver is false? A. Direct labor is the most commonly used cost driver when calculating a predetermined overhead rate. B. Direct labor is gaining in importance in many manufacturing applications with respect to being a significant cost driver. C. Direct labor is an inappropriate cost driver to use if a company is highly automated. D. If direct labor is a good cost driver, increases in direct labor are matched with increases in manufacturing overhead. E. Companies can use either direct labor cost or direct labor hours as a cost driver.

b

Which of the following types of companies would most likely use process costing? A. Aircraft manufacturers. B. Textile manufacturers. C. Textbook publishers. D. Custom-machining firms. E. Shipbuilders.

b

Fog Company, which uses labor hours to apply overhead to manufacturing, may have increased amounts of underapplied overhead at month-end if: A. suppliers of direct materials have an across-the-board price increase. B. an accountant failed to record the period's charges for plant maintenance and security. C. employees are hit hard with a widespread outbreak of the flu. D. direct laborers are granted a wage increase. E. outlays for advertising expenditures are increased.

c

In the two-stage cost allocation process, costs are assigned: A. from jobs, to service departments, to production departments. B. from service departments, to jobs, to production departments. C. from service departments, to production departments, to jobs. D. from production departments, to jobs, to service departments. E. from the balance sheet (when goods are produced), to the income statement (when goods are sold).

c

Regency Company incurred $90,000 of depreciation for the year. Eighty percent relates to the firm's production facilities, and 20% relates to sales and administrative offices. If all items are handled in the proper manner, a review of the company's accounting records should reveal a: A. debit to Depreciation Expense for $90,000. B. debit to Manufacturing Overhead for $90,000. C. debit to Manufacturing Overhead for $72,000. D. debit to Work-in-Process Inventory for $18,000. E. credit to Cash for $90,000.

c

The process of assigning overhead costs to the jobs that are worked on is commonly called: A. service department cost allocation. B. overhead cost distribution. C. overhead application. D. transfer costing. E. overhead cost apportionment.

c

Treetops worked on four jobs during its first year of operation: nos. 401, 402, 403, and 404. Nos. 401 and 402 were completed by year-end, and no. 401 was sold at a profit of 40% of cost. A review of job no. 403's cost record revealed direct material charges of $20,000 and total manufacturing costs of $25,000. If Treetops applies overhead at 150% of direct labor cost, the overhead applied to job no. 403 must have been: A. $0. B. $2,000. C. $3,000. D. $3,333. E. $5,000.

c

Which of the following manufacturers would most likely use job-order costing? A. Chemical manufacturers. B. Microchip processors. C. Custom-furniture manufacturers. D. Gasoline refiners. E. Fertilizer manufacturers.

c

57. Which of the following would not likely be used by service providers to accumulate job costs? A. Projects. B. Contracts. C. Clients. D. Processes. E. All of the above, as service providers cannot use job-costing systems.

d

Electricity costs that were incurred by a company's production processes should be debited to: A. Utilities Expense. B. Accounts Payable. C. Cash. D. Manufacturing Overhead. E. Work-in-Process Inventory.

d

Fletcher, Inc., disposes of under- or overapplied overhead at year-end as an adjustment to cost of goods sold. Prior to disposal, the firm reported cost of goods sold of $590,000 in a year when manufacturing overhead was underapplied by $15,000. If sales revenue totaled $1,400,000, determine (1) Fletcher's adjusted cost of goods sold and (2) gross margin. Adjusted Cost of Goods Sold Gross Margin A. $575,000 $810,000 B. $575,000 $825,000 C. $590,000 $810,000 D. $605,000 $795,000 E. $605,000 $810,000

d

Horton Company applies overhead based on direct labor hours. At the beginning of 20x1, the company estimated that manufacturing overhead would be $500,000, and direct labor hours would be 10,000. Actual overhead by the conclusion of 20x1 amounted to $400,000. On the basis of this information, Horton's 20x1 predetermined overhead rate is: A. $0.02 per direct labor hour. B. $0.025 per direct labor hour. C. $40 per direct labor hour. D. $50 per direct labor hour. E. none of the above.

d

Oregon Manufacturing incurred $106,000 of direct labor and $11,000 of indirect labor. The proper journal entry to record these events would include a debit to Work in Process for: A. $0 because Work in Process should be credited. B. $0 because Work in Process is not affected. C. $11,000. D. $106,000. E. $117,000.

d

Product costing in a manufacturing firm is the process of: A. accumulating the company's period costs. B. allocating costs among the firm's departments. C. placing a value on the company's fixed assets. D. assigning costs to the firm's inventory. E. assigning costs to the company's managers.

d

Pruitt Company has developed an integrated system that coordinates the flow of all goods, services, and information into and out of the organization, working with raw material vendors as well as customers to improve service and reduce costs. The firm is said to be using: A. participative management. B. top-down management. C. strategic cost management. D. supply chain management. E. management by objectives (MBO).

d

Sanger Corporation debited Cost of Goods Sold and credited Manufacturing Overhead at year-end. On the basis of this information, one can conclude that: A. budgeted overhead exceeded actual overhead. B. budgeted overhead exceeded applied overhead. C. budgeted overhead was less than applied overhead. D. actual overhead exceeded applied overhead. E. actual overhead was less than applied overhead.

d

The assignment of direct labor cost to individual jobs is based on: A. an estimate of the total time spent on the job. B. actual total payroll cost divided equally among all jobs in process. C. estimated total payroll cost divided equally among all jobs in process. D. the actual time spent on each job multiplied by the wage rate. E. the estimated time spent on each job multiplied by the wage rate.

d

The term "normal costing" refers to the use of: A. job-costing systems. B. computerized accounting systems. C. targeted overhead rates. D. predetermined overhead rates. E. actual overhead rates.

d

The total production cost of a job is composed of: A. direct material and direct labor. B. direct material, direct labor, manufacturing overhead, and outlays for selling costs. C. direct material, direct labor, manufacturing overhead, and outlays for both selling and administrative costs. D. direct material, direct labor, and applied manufacturing overhead. E. direct material, direct labor, and actual manufacturing overhead.

d

Which of the following statements about manufacturing cost flows is false? A. Direct materials, direct labor, and manufacturing overhead are entered in the Work-in-Process Inventory account. B. The Finished-Goods Inventory account will contain entries that reflect the cost of goods sold during the period. C. The cost of units sold during the period will typically appear on the income statement. D. When a company sells goods that cost $54,000 for $60,000, the firm will enter $6,000 in an account entitled Profit on Sale. E. Units are normally transferred from Work-in-Process Inventory to Finished-Goods Inventory.

d

Which of the following statements about material requisitions is false? A. Material requisitions are often computerized. B. Material requisitions are a common example of source documents. C. Material requisitions contain information that is useful to the cost accounting department. D. Material requisitions authorize the transfer of materials from the production floor to the raw materials warehouse. E. Material requisitions are routinely linked to a bill of materials that lists all of the materials needed to complete a job.

d

Which of the following statements is true? A. Service firms have little need for determining the cost of their services. B. The concept of product costing is relevant only for manufacturing firms. C. The cost of year-end inventory appears on the balance sheet as an expense. D. Service companies use cost information for planning and control purposes. E. Mining and petroleum companies have no inventoriable costs.

d

A review of a company's Work-in-Process Inventory account found a debit for materials of $67,000. If all procedures were performed in the correct manner, this means that the firm: A. also recorded a credit to Raw-Material Inventory. B. also recorded a credit to Manufacturing Supplies Inventory. C. was accounting for the usage of direct materials. D. was accounting for the usage of indirect materials. E. was accounting for the usage of direct materials by also crediting the Raw-Material Inventory account.

e

Carlson charges manufacturing overhead to products by using a predetermined application rate, computed on the basis of labor hours. The following data pertain to the current year: Budgeted manufacturing overhead: $1,600,000 Actual manufacturing overhead: $1,632,000 Budgeted labor hours: 50,000 Actual labor hours: 48,000 Which of the following choices denotes the correct status of manufacturing overhead at year-end? A. Overapplied by $32,000. B. Underapplied by $32,000. C. Overapplied by $68,000. D. Overapplied by $96,000. E. Underapplied by $96,000.

e

Manufacturing overhead: A. includes direct materials, indirect materials, indirect labor, and factory depreciation. B. is easily traced to jobs. C. includes all selling costs. D. should not be assigned to individual jobs because it bears no obvious relationship to them. E. is a pool of indirect production costs that must somehow be attached to each unit manufactured.

e

Selto Manufacturing recently sold goods that cost $35,000 for $45,000 cash. The journal entries to record this transaction would include: A. a credit to Work-in-Process Inventory for $35,000. B. a debit to Sales Revenue for $45,000. C. a credit to Profit on Sale for $10,000. D. a debit to Finished-Goods Inventory for $35,000. E. a credit to Sales Revenue for $45,000.

e

The estimates used to calculate the predetermined overhead rate will virtually always: A. prove to be correct. B. result in a year-end balance of zero in the Manufacturing Overhead account. C. result in overapplied overhead that is closed to Cost of Goods Sold if it is immaterial in amount. D. result in underapplied overhead that is closed to Cost of Goods Sold if it is immaterial in amount. E. result in either underapplied or overapplied overhead that is closed to Cost of Goods Sold if it is immaterial in amount.

e

Under- or overapplied manufacturing overhead at year-end is most commonly: A. charged or credited to Work-in-Process Inventory. B. charged or credited to Cost of Goods Sold. C. charged or credited to a special loss account. D. prorated among Work-in-Process Inventory, Finished-Goods Inventory, and Cost of Goods Sold. E. ignored because there is no effect on the Cash account.

e

Which of the following entities would not likely be a user of job-costing systems? A. Custom-furniture manufacturers. B. Repair shops. C. Hospitals. D. Accounting firms. E. None of the above, as all are likely users.

e

Which of the following statement(s) is (are) correct regarding overhead application? I. Actual overhead rates result in more accurate but less timely information. II. Predetermined overhead rates result in less accurate but more timely information. III. Predetermined overhead rates tend to smooth product costs over time. A. III only. B. I and II. C. I and III. D. II and III. E. I, II, and III

e

Which of the following statements regarding work in process is not correct? A. Work in process is partially completed inventory. B. Work in process consists of direct labor, direct material, and manufacturing overhead. C. Work-in-Process Inventory is debited to record direct material used and direct labor incurred. D. Work-in-Process Inventory appears on the year-end balance sheet. E. Work-in-Process Inventory is credited when goods are sold.

e