Cert Blaster 1101

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

Which motherboard type supports advanced power saving features? A) AGP B) ATX C) AT D) Baby AT

B) ATX /Advanced Technology Extended motherboards can manage power to adapters and devices by sharing power management with software.

An application has installation requirements of 1 GB RAM, 2 MB video memory and 15 GB hard drive space. When installing the program, it displays an error message, "Insufficient Memory". You know for a fact that your system has exactly 4 GB of RAM and your video card is set at 2 GB. There is more than 250 GB of free hard drive space available. What will resolve this error? A) Add video memory B) Add RAM C) Defrag the hard drive D) Reduce video memory to 512MB

B) Add RAM /The scenario indicates that the computer has plenty of hard drive space and is set to adequate video memory. Even though the application requires only 1 GB of RAM and the system has 4 GB, the system may be using more of the RAM and therefore has an insufficient amount of RAM, which would require more RAM to be added.

What are the characteristics of IEEE 802.11b wireless standard? (Select all that apply A) Maximum data signaling rate of 54 Mbps B) 5.0 GHz frequency band C) Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) D) 2.4 GHz frequency band E) Maximum data signaling rate of 11 Mbps

2.4 GHz frequency band Maximum data signaling rate of 11 Mbps /The IEEE 802.11b standard was one of the first Wi-Fi standards featuring a low throughput rate of only 11 Mbps over the 2.4 Ghz frequency. At the time of its release in the 1990s, this was considered a relatively fast internet speed but currently this standard has been replaced by faster and more flexible options.

John has just installed two memory modules on a motherboard that supports DDR3 RAM with the bus speed up to 1600 MHz. The specifications of memory are DDR3 1066 MHz for one module and DDR3 1333 MHz for another. On which of the following bus speeds will the system function? A) 800 MHz B) 1000 MHz C) 1066MHz D) 1600 MHz

A) 1066 MHz /RAM will function at the slower of the 2 speeds.

You are connecting a flat panel monitor to a VGA video card. How many pins will the connector have? A) 15 B) 9 C) 25 D) 40

A) 15/ PCI Video cards will be VGA and have a three-row 15 pin connector called a DE-15 or mini sub D15.

Of the IEEE specifications listed, which is/are capable of operating at 11Mbps? (Choose all that apply.) A) 802.11a B) 802.11b C) 802.11g D) 802.11

A) 802.11a B) 802.11b C) 802.11g

Of the IEEE specifications listed, which is/are capable of operating at 11 Mbps? (Choose all that apply) A) 802.11a B) 802.11b C) 802.11g D) 802.11

A) 802.11a B) 802.11b C) 802.11g /The highest speed an 802.11b can reach is 11 Mbps. 802.11a and 802.11g devices, while capable of higher speeds, will also communicate at lower speeds.

A user reports that his PC makes a grinding sound when he opens Word documents on his storage drive. A) Cleaning equipment B) A 1TB HDD C) Disk diagnostic software D) A 1TB M.2 SSD

A) A 1 TB HDD/ You will have to bring a replacement 1 TB HDD to replace the hard disk. The disk heads are contacting the disk. Data destruction is a very possible outcome of continuing to use the drive. Immediate shutdown will prevent further damage. An M.2 SSD is an unlikely fit. Your service kit should contain diagnostic software and cleaning supplies.

In twisted pair cabling, wires are grouped into pairs and twisted around each other to reduce which of the following? A) Cross-talk B) Cable diameter C) Collisions D) Bend radius

A) Cross-talk /Cross talk is the transference of electronic signals from one wire to another. By twisting the wires around one another, this problem is significantly reduced.

If users repeatedly access the same sites on the Internet, what can you use to improve performance? A) HTTP Proxy Server B) Web server C) Network server D) None of the above

A) HTTP Proxy Server/ An HTTP Proxy server can cache web pages locally.

You are looking in your spare parts inventory for a Micro-ITX motherboard. Before getting down to numbers, how will you visually base your first round of choices? A) Internal expansion ports B) Memory slots C) External expansion slots D) All of these

A) Internal expansion ports /When examining the boards, you will see the Micro-ITX boards only have one expansion slot on-board. Then you can begin to search more specifically, separating out the Mini-ATX.

Your laptop appears not to be booting? Then you look at the display from a different angle and can faintly see your login screen. Which component do you suspect? A) Laptop backlight B) Laptop screen C) Laptop power supply D) Laptop video adapter

A) Laptop backlight /Since the visibility of the laptop display requires a light behind it (backlight) in order to be seen, it would appear that the backlight needs to be checked.

In this cloud model, services are available to the public over a standard Internet connection. A) Public cloud B) Private cloud C) Community cloud D) Hybrid cloud

A) Public cloud /In a public cloud, services are available to the public over a standard internet connection. The most recognizable public cloud services are the email services provided by Google and Yahoo.

Which touch screen technology uses two sheets of glass separated by spacers? A) Resistive B) Capacitive C) Passive D) Resistant

A) Resistive /Resistive touch screen technology uses two sheets of glass separated by spacers. When pressure is applied to the top sheet of glass, it bends to make contact with the bottom sheet and type the letter or press the button under the point of contact.

What should be done after installing a new inkjet cartridge? A) Run the printer alignment program B) Print a very detailed picture C) Adjust the assignment manually D Reboot your computer

A) Run the printer alignment program /The new inkjet cartridge should be aligned. Most printers have a print alignment software program.

What is an LCD monitor technology that has distortion when viewed at an angle but has faster response times and less power draw? A) TN (Twisted Nematic) B) IPS (In-plane Switching) C) VA (Vertical Alignment) D) Plasma

A) TN (Twisted Nematic) /Twisted Nematic display screens have the shortest response time, low power draw, low manufacturing cost but also narrow viewing angle, which can cause color distortion.

A customer calls to say that the Windows desktop appears to be distorted. What could you do to try to isolate the problem? (Choose two.) A) Try another monitor. B) Try another program. C) Replace the power supply. D) Install additional video memory. E) Boot the computer to a command prompt.

A) Try another monitor E) Boot the computer to a command prompt /The monitor could be malfunctioning. One solution is to simply replace it. It might be required to restart the computer in another video mode, like a command prompt, to be able to troubleshoot the monitor.

What is the maximum length of a 100BaseTX segment? A) 100 feet B) 1000 meters C) 100 meters D) 1000 feet

B) 100 meters (328 feet) /100BaseTX is the leading form of Fast Ethernet, and runs over two wire-pairs inside a CAT 5 or above cable. Each network segment can have a maximum cabling distance of 100 meters (328 feet). 10BaseT and 10BaseTX have a maximum segment length of 100 meters.

While unboxing your new external USB 3 storage device you see that the device uses a USB Type-C connector on both ends. What is the highest connection speed you can expect when correctly connected to your new computer? A) 12 Mbps B) 480 Mbps C) 5 Gbps D) 10 GPS

B) 5 Gbps /USB Type-C runs at a maximum speed 5Gbps. USB speeds are USB 1 at 12 Mbps, USB 2 at 480 Mbps, USB 3 at 5 Gbps, and USB 3.1 at 10GPS.

You have been tasked with replacing all the wireless access points in the office building with new WAPs at greater speeds, while maintaining total WiFi coverage throughout the office. Which of the following 802.11 standards should be used? (MIMO simultaneous) A) 802.11a B) 802.11ac C) 802.11b D) 802.11g E) 802.11n

B) 802.11ac /The 802.11ac standard offers a data throughput rate of Gbps over a wider channel range than other WiFi standards. Additionally, this standard offers MIMO simultaneous downlink transmissions.

A user reports that his PC makes a grinding sound when he opens Word documents on his storage drive. The user is currently using a 1TB HDD for storage. You will be going to the site and instruct the user to shut down the machine. What specific item would you bring with you? A) Cleaning equipment B) A 1 TB HDD C) Disk Diagnostic Software D) A 1 TB M.2 SSD

B) A 1 TB HDD/ You will want to bring a replacement 1 TB HDD to replace the hard disk. The disk heads are contracting the disk. Data destruction is a very possible outcome of continuing to use the drive. Immediate shutdown will prevent further damage. An M.2 SSD is an unlikely fit. Your service kit should contain diagnostic software and cleaning supplies.

Most laptops use a power adapter that converts ___________. A) AC amps to DC volts B) AC current to DC current C) DC current to AC current D) DC volts to AC amps

B) AC current to DC current

When securing a system, how is chassis intrusion protection enabled? A) Action center B) BIOS/UEFI C) Control panel D) It is best to use all of these choices

B) BIOS/UEFI /System hardening takes place at all levels of the system operation. Most hardening measures are software based. The hardware based protections like power on passwords or BIOS change protection can be easily defeated by simply clearing or resetting BIOS/UEFI. With the new access, the intruder can, por ejemplo, change the boot order to boost to their system disk, bypassing things like password protection and gaining access to your data.

A user is troubleshooting a printer that has frequent paper jams. The user recreates the problem and checks the printer logs for more information about the printer. Which of the following choices are MOST likely fixes to this problem? (Choose two) A) Clean and inspect the laser drum assembly B) Clean and inspect the entire paper path C) Use the printer maintenance kit to replace rollers D) Replace the laser E) Clean the fuser assembly

B) Clean and inspect the entire paper path C) User the printer maintenance kit to replace rollers/ Clearing the paper jam from the system and potentially replacing roller kit parts are the only two options directly related to a paper jam. The laser and laser drum assembly are not directly related to a paper jam. Additionally, the fuser assembly is responsible for applying heat and pressure to the paper so as to fuse the toner on the page and is not directly related to a paper jam.

Which of the following describes network equipment that cannot send and receive at the same time? A) Simplex B) Half Duplex C) Duplex D) Switched Duplex

B) Half duplex /Duplexing refers to the capabilities of devices transmitting on the network. Full Duplex devices can send and receive communications simultaneously. Half duplex devices can transmit data but must then wait to receive incoming communications. Simplex can only transmit.

This Windows feature uses the raw speed of SD memory to improve the hard drive performance of your PC. In order to qualify, the device must: A) Have a 7200 RPM hard disk B) Have an SD card with more than 256 MB free space C) Have a 5400 RPM hard disk D) Be using the AERO theme

B) Have an SD card with more than 256 MB free space /When you insert a qualifying SD device into your Windows 7 or later machine, you will be asked if you want to use ReadyBoost. Do this for devices that you expect to stay connected for reasonable lengths of time. This process will take whatever space you have dedicated to it and save as a file, which you would have to delete to regain your full capacity.

A workstation has a network link light but cannot access internal network resources. You ping 127.0.0.1 and successfully establish your NIC is working properly. Which of the following is the MOST likely cause of the issue? A) Slow transfer speeds B) IP address conflict C) Incorrect gateway D) Packet collisions

B) IP address conflict /If the loop back address is working and the network has a good link light then this establishes that the computer has good communication capabilities. A Second step to troubleshoot network connectivity, not mentioned in this scenario, would be to ping a distant IP. If this was successful, then this would establish good connectivity to outside networks. Therefore, the inability to access internal network communications is likely an IP address conflict.

Your system applications keep crashing. The system works for email and word processing but when you open a graphics program at the same time then the applications crash. What is the likely cause? A) There is not enough memory B) Memory errors are occurring in one of the higher memory modules. C) The memory modules are incompatible with one another. D) The application is 64 bit on a 32 bit OS.

B) Memory errors are occurring in one of the higher memory modules. /Because the RAM is working for some programs such as email and word processing, the issue is not a lack of RAM, but something related to the application of RAM and the graphics program that has been installed. If the memory module were incompatible, then no programs would work. Therefore, we can deduce that there must be something wrong with the memory modules.

You are troubleshooting a networked printer that is confirmed online and ready to print. Some employees from the sales group are unable to print to this networked printer, but other departments can. Which of the following would you use to resolve the problem? A) Replace the printer's network cable B) Modify the security setting of the print spooler C) Restart the TCP/IP print spooler service D) Use the manufacturer's maintenance kit

B) Modify the security setting of the print spooler/ This scenario is likely a security settings issue as some groups can print and others cannot. The permission settings on the print spooler may have denied access to the sales group.

You have a new PCIe video card to install on a PC. What slot form factor will the device typically require? A) NGFF B) PCI Express C) M.2 D) mSATA

B) PCI Express /A PCIe card will use a PCI express slot on the PC. For space-saving designs like laptops or "All-in-one" PCs, the M.2 slot is the latest version and supports very small devices like SSDs. This connection type began as NGFF (Next Generation Form Factor). mSATA is a storage solution.

A user needs telnet remote terminal access to be able to work from home. You disapprove of this citing security concerns. What is your optimal solution for this user? A) SFTP B) SSH C) RDP D) Telnetd

B) SSH /Telnet sessions are insecure and hackers can obtain usernames and passwords without much trouble. SSH addresses this security issue and is implemented through open source programs such as PuTTY or KiTTY. Telnetd is a telnet server.

What does a PC require to able to communicate to a network? A) Opposite protocol B) Same protocol C) Added power supply D) Added RAM

B) Same protocol /Protocols are the rules for communicating on a network. Remember, all computers that wish to communicate must follow the same set of rules.

Microsoft Windows includes a virtualization feature that launches a VM that can be used for testing. This feature is limited to one active instance per system. What is it called? A) Secret Garden B) Sandbox C) MSVMD D) OneDrive

B) Sandbox /When enabled, The Windows OS Sandbox feature lets you launch a virtual machine that is isolated from the host system. It is fully functional. The catch is that, unlike true VMs, you cannot save the Sandbox and any changes are permanently lost when it is closed. A Secret Garden is a web portal used by shared network connections in hotels and coffee shops. OneDrive is a Microsoft cloud-based storage solution and MSVMD does not apply.

An employee is complaining that when he turns his lights on in the office, he can't connect to the network. With the light off his system works fine. What can be the problem? A) There is a voltage drop when the lights are turned on. B) The cabling system is faulty. C) The NIC needs to be replaced. D) All of these.

B) The cabling system is faulty

Which of the following is the most recent type of printer interface? A) Serial B) USB C) SCSI D) Parallel

B) USB /The USB interface is newer than the serial and parallel interfaces.

What is the charge on the drum after the conditioning phase? A) +600V B) 0 C) -600V D) +6000V

C) -600V /A large negative voltage is applied to the photosensitive drum.

What is the charge on the drum after the conditioning phase? A) +600V B) 0 C) -600V D) +6000V

C) -600V /During the laser printer's conditioning phase a uniform charge of -600 volts is placed on the photosensitive drum.

What is the term used to describe a loss in signal strength during transmission due to increasing distance and obstacles encountered along the signal path? A) Amplitude B) Cross-talk C) Attenuation D) Brownout

C) Attenuation /Attenuation is the loss of signal strength resulting from natural resistance from transmittance over long distances.

A space-saving fiber optic connector type MTRJ can be used with which of the following cable types? A) SMF B) MMF C) Both SMF and MMF D) Neither SMF or MMF

C) Both SMF and MMF /Mechanical Transfer Registered Jack can be used with both Single Mode Fiber or Multimode Fiber.

Which of the following is firmware? A) RAM B) Windows C) CMOS/BIOS D) ASCII

C) CMOS/BIOS /CMOS/BIOS must be stored on a permanent memory chip not needing constant power. It starts up the system and is called firmware.

Two networks in different offices have been using DHCP set up for 192.168.1.0/24. After consolidating networks, IP addresses have run out. Which of the following is the MOST cost-effective solution? A) Request another class C IP scope from the ISP B) Switch to static IP addressing C) Change the subnet mask to 255.255.254.0. D) Add a router to connect both networks

C) Change the subnet mask to 255.255.254.0. /The lowest cost solution is to borrow bits from the network segment of the subnet mask and enable the network to expand the number of available IP addresses.

After answering a service call, you find a customer's computer is dead. Which of the following checks would you perform first? A) Check to see if the power supply is functional. B) Check the CMOS battery. C) Check the AC outlet voltage. D) Check for excessive EMI.

C) Check the AC outlet voltage. /Never overlook the obvious! Perform problem determination by checking all connections first, and that includes power connections. If you find that the PC is plugged in, a faulty AC outlet would cause a dead computer. Your next step would be to verify the power supply as that could also cause a dead battery.

What is the first thing to check when a print job is stalled in a WIndows-based PC? A) Try another print driver B) Try another printer cable C) Clear the spooler D) Restart the PC

C) Clear the spooler/ The spooler service of Windows manages the printing. If a print job is stalled, it is most likely the spooler service has hung. As a first troubleshooting step, it should be restarted.

What would you need to connect two peer-to-peer PCs using RJ-45 connectors? A) Router B) BNC-T connection C) Crossover cable D) Repeater

C) Crossover cable /To connect only two computers with one cable, you can use a bus topology (NIC to NIC), a parallel cable (parallel port to parallel port), or a crossover cable (NIC to NIC).

When setting up a SOHO wireless network and attempting to prevent unauthorized individuals from discovering the network, which of the following parameters would MOST likely be configured? A) Configure a proxy server address B) Enable WEP encryption C) Disable SSID broadcast D) Configure DMZ settings

C) Disable SSID broadcast/ Disabling the SSID (Service Set Identifier) will make it more difficult for unauthorized users to find your wireless network.

Which of the devices listed is responsible for enforcing security policies that determine what traffic is allowed to enter or leave the network? A) Bridge B) Switch C) Firewall D) Hub

C) Firewall

You are upgrading the internal mini PCIe 802.11b/g wireless network card on your legacy laptop. Your replacement card will support 802.11a/b/g/n/ac/ax and Bluetooth. Which form factor would you expect as a replacement part from the manufacturer? A) USB B) Mini PCIe C) Half height Mini PCIe D) IEEE 1394 E) Bluetooth

C) Half height Mini PCIe /Based on the age of the laptop and current Wi-FI card, your replacement from the manufacturer will be Half height Mini PCIe. In some cases, the new card will be M.2/NGFF with an adapter for compatibility.

What would NOT be present on a modern ATX-compatible power supply? A) SATA B) Molex C) Molex ll D) 24-pin P1

C) Molex II

Which of the following connector types would NOT be present on a modern ATX-compatible power supply? A) SATA B) Molex C) Molex II D) 24-pin P1

C) Molex II/ The connectors shown will all be available except for Molex II, which is not a valid connector type.

How would you tell the difference between an ATA/33 IDE cable and an ATA/66 IDE cable? A) Cable length B) Cable pin out C) Number of wires D) Twists in the cable

C) Number of wires /The ATA33 cables have 40 wires, while the ATA66/100 has 80 thinner wires. The ATA/66 cable reduces crosstalk between its wires which increases speed capability.

Unshielded Twisted Pair (UTP) type cable uses which connector? A) RJ-11 B) XT-20 C) RJ-45 D) RJ-55

C) RJ-45/ UTP uses the 8 pin RJ-45 connector.

After a user clicks the print shortcut icon on the standard tool bar of the application, the document prints to the wrong printer. What answer will correct this? A) Change the desired printer driver B) Drag the desired printer to the desktop C) Set the desired printer as default. D) Change the desired printer's location on the network

C) Set the desired printer as default /The desired printer should be set as default. This would prevent the same thing from happening again.

You receive a call from a customer who tells you when they are typing, some letters have been replaced by numbers. What has happened to their laptop? A) The keyboard is defective B) They are touching the mouse pad while typing C) The Num Lock is on D) The OS is corrupted and needs to be reloaded

C) The Num Lock is on/ The NUM Lock function has been activated

You recently upgraded the BIOS of a workstation that is running multiple hard drives. When attempting to boot an error message displays "Operating system not found". What is the FIRST thing you should inspect? A) The hard drive type settings in the BIOS B) The power supply connections to the hard drive C) The boot sequence settings in the BIOS D) The motherboard SATA connections

C) The boot sequence settings in the BIOS /When booting a computer, the boot order determines which drive to find in the operating system. If the operating system is not found, then likely the boot order is wrong, and the computer is booting from a drive that does not contain the operating system. The solution is to change the boot order withing the BIOS and enable the correct drive that contains the operating system to be in the boot process.

How many devices can the USB interface support? A) 128 B) 64 C) 256 D) 127

D) 127

In terms of compatibility, which connector type is reversible? A) Lightning B) USB-C C) Thunderbolt D) All of these

D) All of these

Which of these standards can experience interference from cordless phones using the 2.4 GHz band? A) 802.11b B) 802.11g C) 802.11n D) All of these could experience interference depending on configuration

D) All of these could experience interference depending on configuration

In the Hybrid cloud model, which cloud types are accessible? A) Public cloud B) Private cloud C) Community cloud D) All of these

D) All of these/ The Hybrid cloud represents a mix of public, private, and community services. A good example of this would be a company that hosts its databases privately while using public email servers.

An employee wishes to connect a laptop to an external monitor, keyboard, and mouse, while also charging the battery. Which of the following devices would you recommend? A) Lightning B) KVM switch C) USB 3.0 D) Docking station

D) Docking station /A laptop docking station will have multiple connections for external peripherals such as a monitor, keyboard, and mouse. Additionally, the docking station will have a connection to the laptop's power to charge the laptop battery while plugged into the docking station.

Which tool would you use to check a network card in a running PC? A) Multimeter B) Tone probe C) Cable tester D) Loopback plug E) Punchdown tool

D) Loopback plug

John has downloaded an image file and needs to install an application from the image. When John opens the file, an error message is displayed. What should John perform? A) Download a different file from the web B) Rename the extension of the file to a known extension C) Verify the MD5 hash of the downloaded file D) Mount the file as an emulated DVD

D) Mount the file as an emulated DVD /In order to access files on an image file, that image must first be mounted to the computer's file system. By mounting the file, we are giving a location for the file on the computer from which the operating system can now find the specific file the user is wanting to access.

You have an internal DVD drive plugged into the internal connector of a SATA card and a scanner plugged into the external connector to the same SATA card. Which of the following devices require termination? A) Only the External device B) Only the internal device C) Both the Internal and External device D) Neither device

D) Neither device/SATA devices - internal or external - do not require termination. A SCSI device would require termination on both the internal and external devices. PATA devices require master, slave or cable select addressing on the internal device. The external PATA would be in an enclosure that would connect through USB or FireWire connectors.

What is the main difference between a hypervisor and a virtual machine manager? A) Addressable memory B) OS limitations C) Networking capabilities D) No difference

D) No difference

What is the first step in the boot process? A) ROM BIOS B) CMD.EXE C) BOOTMGR D) POST

D) POST/ The POST software is contained in the System ROM BIOS, it is the first item to execute.

Which of one of these hardware devices on a motherboard can be updated through software? A) Chip set B) Data bus C) IDE controller D) System BIOS

D) System BIOS /The System BIOS can be updated with a Flash BIOS upgrade program usually resident on a diskette.

You notice that your laptop is performing random mouse actions on the touchpad. What is the most effective way to fix this issue? A) Adjust the settings so the mouse moves slower. B) Reverse the buttons on the mouse pad. C) Adjust the mouse settings so the mouse moves faster. D) Use the function keys to disable the mouse pad.

D) Use the function keys to disable the mouse pad. /To quickly disable the mouse pad, a function key can stop this capability.

Which of the following statements are true about screen refresh rate in Windows? A) The default refresh rate setting is 60 Hertz. B) If you use a higher refresh rate, you can eliminate problems like screen flickering. C) If you specify a refresh rate that is too high for your monitor, your screen may become unstable, and your hardware may be damaged. D) A change to the refresh rate affects all users. E) All of these

E) All of these /All of the above are true about screen refresh rates in Windows.

Which of the following involves two servers and makes use of POP3 or IMAP4? A) Web server B) File server C) DHCP server D) DNS server E) Mail server

E) Mail server/ Email is a client-server application that involves two mail servers. SMTP is used to send email messages, and either POP3 or IMAP4 is used to deliver an email message to a client.

You are working on a 10-user network that has frequent troubles at night. The network almost never has trouble in the daytime while the lights are off. This problem is most likely: A) Power sags due to the lights B) Incorrect cable routing. C) The wrong protocol being installed. D) None of these are correct.

Incorrect cable routing /The cabling is run too close to an EMI source. The problem manifests itself only at night because that is when the lights are turned on.

Which of these choices provides the highest level of performance and redundancy? A) RAID 0 B) RAID 1 C) RAID 5 D) RAID 10

RAID 10 /RAID 0 is quite fast but provides no parity or mirroring information to recover from a drive loss and so it is not fault tolerant. RAID 1 is slightly slower because each write operation has to take place on each drive in the mirror before continuing. Although fast, RAID 5 stripes parity data across all drives and can more readily tolerate drive failures than the other types. A failed RAID 5 volume will still operate and can be rebuilt by simply replacing the failed drive. It will rebuild itself using the parity information stored on the other drives. RAID 10 (one zero or 1 + 0) provides the combination of speed and redundancy not found in other implementations. It combines the bit for bit real time redundancy not found in other implementations. It combines the bit for bit real time redundancy of mirroring (RAID 1) with the speed of striping data (RAID 0). The cost of implementation is higher due to the number of disks needed. RAID 10 is a hybrid as it combines the function of two RAID levels. Other combinations of this type exist but are outside the scope of the A+ certification exam objectives.

After booting a workstation, a "Date and Time Not Set" message appears on the screen. What is the MOST possible cause? A) The computer was not shut down properly B The CMOS battery needs to be replaced C) The OS has stopped syncing with the NTP server D) The system BIOS is corrupted

The CMOS battery needs to be replaced. /The date and time settings require continuous power to sync with standards time, which is taken care of by the CMOS battery.


Ensembles d'études connexes

1. Decontamination is needed in order to:

View Set

Dynamics of Personality Chapter 11 Engler

View Set

Markdown & Sale Price (Ch. 6 Review Part 2), Discount, Sale Price

View Set

Med Serg 1 Prep U Chapters 12, 13, & 19!

View Set