Chapter 5

20. What is the most amount of RAM that can be used by a 32-bit installation of Windows XP Professional?

4 GB

2. How many pins are on a DDR DIMM? SDRAM DIMM?

For DDR DIMM, 184 pins. For SDRAM DIMM, 168 pins.

1. How many pins are on a DDR3 DIMM? DDR2 DIMM?

For DDR3 DIMM, 240 pins. For DDR2 DIMM, 240 pins.

25. How many 30-pin SIMMs are installed in one bank?

Four

4. Which two metals might be used for the edge connectors of memory modules and memory slots they install in?

Gold and tin

18. Looking at an SDRAM DIMM, how can you know for certain the voltage needed by the module?

Look at the notch on the right side of the module.

29. You need to find out how much RAM is installed in a system. What command do you enter in the Run dialog box to launch the System Information utility?

Msinfo32

2. If your motherboard supports DIMM memory, will RIMM memory still work on the board?

No, you can only use the type of memory module the board is designed to support.

3. How many notches does a DDR 3 DIMM have?

One

28. You are looking to purchase two DIMMs running at 400 MHz. You find DIMMs advertised at PC4000 and PC3200. Which do you purchase?

PC3200

7. When a DIMM has chips on both sides of the module, do the pins on one side of the module work independently or dependent to pins on the other side of the module?

Pins on each side work independently

5. What was the first type of DIMM that ran synchronized with the system clock?

SDRAM DIMM

24. What types of memory can be used on a 100-MHz motherboard?

SDRAM and DDR SDRAM

22. What is the purpose of the memory technology called SPD?

SPD declares to system BIOS at startup the module's size, speed, voltage, and data path width.

10. In a memory ad for DIMMs, you notice 64Meg ×72 for one DIMM and 64Meg ×64 for another DIMM. What does the 72 tell you about the first DIMM?

The first DIMM supports ECC technology for error checking

16. When parity memory detects an error, what happens?

The system displays a parity error message and comes to a halt

5. Your motherboard supports dual channeling and you currently have two slots used in Channel A on the board. You want to install an additional 512MB of RAM. Will your system run faster if you install two 256 MB DIMMs or one 512 MB DIMM? Explain your answer.

The system will run faster if you install two DIMMs because dual channeling can be used if both Channel B slots are filled. Dual channeling is faster than single channeling.

17. How many notches are on an SDRAM DIMM?

Two

26. How many 72-pin SIMMs are installed in one bank?

Two

15. If two bits of a byte are in error when the byte is read from ECC memory, can ECC detect the error? Can it fix the error?

Yes, No

21. A motherboard uses dual channeling, but you have four DIMMs available that differ in size. The motherboard supports all four sizes. Can you install these DIMMs on the board? Will dual channeling be enabled?

Yes, the DIMMs will work on the board, but dual channeling will not be enabled.

14. What is the speed rating in MHz for a DIMM that has a PC rating of PC2-6400? What type of DIMM is assigned a PC2 rating?

800MHz, DDR2 DIMM

12. Generally, which DIMM gives better performance, a single-ranked DIMM or a dual-ranked DIMM?

A single-ranked DIMM

27. Which is faster, CL3 memory or CL5 memory?

CL3 is faster than CL5 memory

19. A DIMM memory ad displays 5-5-5-15. What is the CAS Latency value of this DIMM?

CL5

9. Which module, a DDR3 or DDR2 DIMM, uses lower voltage?

DDR3 DIMM

13. What type of DIMM supports triple channeling?

DDR3 DIMMs

6. What major improvement did DDR make over regular SDRAM?

Data is processed twice in one clock beat, doubling the speed of regular SDRAM

11. A DIMM that contains memory chips in two memory banks on the module is said to be ______.

Dual ranked

30. Although ECC memory costs more than non-ECC memory, why would you choose to use it?

ECC memory is more reliable than non-ECC memory.

23. You need to upgrade memory on a motherboard that uses RIMMs. You notice one RIMM and one C-RIMM module are already installed on the board. Which module should you replace?

The C-RIMM module

4. You have just upgraded memory on a computer from 256 MB to 512 MB by adding one DIMM. When you first turn on the PC, the memory count shows only 256 MB. Which of the following is most likely the source of the problem? What can you do to fix it? a. Windows is giving an error because it likely became corrupted while the PC was disassembled. b. The new DIMM you installed is faulty. c. The new DIMM is not properly seated. d. The DIMM is installed in the wrong slot.

The new DIMM is not properly seated. Turn off the PC and reseat the DIMM. Check that the DIMM is standing in the slot at the same height of the other DIMM installed.

8. What prevents a DDR DIMM from being installed in a DDR2 DIMM slot on a motherboard?

The position of the one notch on the DIMM module

1. You need to upgrade memory in a system but you don't have the motherboard documentation available. You open the case and notice that the board has four DIMM slots; three slots are colored yellow and one slot is black. What type of DIMM does the board likely use? How can you be sure?

The three yellow slots probably indicate triple channeling, which means the board uses DDR3 DIMMs. To know for sure, remove a DIMM and look for the position of the notch on the DIMM.

3. If your motherboard supports ECC SDRAM memory, can you substitute non-ECC SDRAM memory? If your motherboard supports buffered SDRAM memory, can you substitute unbuffered SDRAM modules?

You can substitute non-ECC memory on an ECC board, and the error-checking feature will be shown disabled in BIOS setup. You cannot use unbuffered SDRAM on a motherboard that supports buffered memory, because the notches on buffered DIMMs are in different positions than for unbuffered DIMMs.