Coatings Questions
Power tool cleaning provides a better foundation for the priming of paint than hand tool cleaning.
true
Prior to flame cleaning, any heavy layers of rust should be removed by manual cleaning.
true
Prior to pickling, cleaning of heavy deposits such as oil, grease, and soil should be done.
true
Standard methods of rust removal include blasting, manual or mechanical rust removal, flame cleaning, and pickling.
true
Sulfuric or hydrochloric acid pickling, Phosphoric acid pickling and Footner pickling are three of the six main pickling methods.
true
Surface cleaning includes removal of contaminants/coats of materials other than metal and removal of coated material related to the metal (scale and rust).
true
Surface preparation before manual cleaning includes removing visible oil, grease, soluble welding residues, and salts.
true
Surface preparation is the essential first-stage treatment of a steel substrate before the application of any coating
true
Testing the cleanliness of the blasted surface can be done by visual or field testing, and by instrument or laboratory testing.
true
The brush should not be dipped more than one-third of the bristle length into the paint to avoid overloading the bristles and filling the heel with paint.
true
The electrostatic spray technique uses expensive equipment and has a slower operation than other spray applications.
true
The entire paint contents should be poured into an empty clean drum or can, ensuring that no heavy paste remains in the original container.
true
The original method of spray application was by air atomization.
true
The paint should be mixed in a manner that will ensure the breakup of all lumps, complete dispersion of pigment, and a uniform composition.
true
The paint surface should be dry before application of overcoating.
true
The pressure on the material in the pot and of the air at the gun should be adjusted for optimum spraying effectiveness.
true
The term surface preparation means the methods of treating the surface of substrate prior to application of coating.
true
There are several types of spray equipment: air, airless, hot, and electrostatic spray.
true
Pickling is a method of preparing metal surfaces by chemical reaction, electrolysis, or both.
true
All surfaces can be prepared for the application of protective coatings by only using one single universal method.
false
Applying warm paint to cold steel is beneficial to curing.
false
Blast cleaning could be conducted on surfaces that will be wet after blasting and before coating.
false
Both normal finishing paints and drum paints require rolling during the storage period.
false
Coatings should be applied to wet or damp surfaces.
false
Electrostatic spraying can frequently be used for on-site work.
false
Heating enables the solvent content of the material to be reduced, allowing a thinner film to be applied.
false
Hot coatings could be applied to cold surfaces and vice versa.
false
If compressor units for air spray equipment are powered by a gas or diesel engine, they should be located inside the building.
false
Manual cleaning is the MOST satisfactory method of preparation, especially for steelwork exposed to severe or moderate conditions.
false
Only some paints and paint materials used should comply with the specification given in relevant standards.
false
Paint can be applied when the temperature is below 4°C.
false
Paint that does not have a limited pot life or does not deteriorate on standing should not be remixed before using.
false
Paints should be stored in open containers to keep them fresh.
false
Paints should preferably be mixed by hand.
false
Pickling is NOT considered a desirable method of removing rust and mill scale from structural shapes, beams, and plates in workshops when the cost of such removal is felt to be justified.
false
Power tool cleaning is suitable for small and large areas.
false
Steel may be blast-cleaned just before fabrication.
false
The addition of more water than is necessary to obtain a satisfactory brushing consistency is allowed.
false
The coating applied to a blast-cleaned surface DOES NOT last longer than similar coating applied to a flame-cleaned surface.
false
The newest paint of each kind should be used first.
false
The number of coats should be the maximum needed to achieve the specified film thickness.
false
The paint temperature should not be excessively high or low in any conditions.
false
When mixing two-component paints, check and remix each component simultaneously and then blend the two components at a very fast speed until the mixture is completely uniform in color.
false
Acceptable methods to remove dirt and dust after manual cleaning and before painting include brushing; blowing with clean, dry air; and vacuum cleaning.
true
Airless spray relies on hydraulic pressure rather than air atomization to produce the desired spray.
true
Airless spray usually is faster, cleaner, more economical, and easier to use than conventional air spray and applies thicker film.
true
All larger containers should be mixed by mechanical agitators and brought to a uniform consistency.
true
All materials should be supplied in the manufacturer's original containers, durably and legibly marked according to relevant standards.
true
Any and all holes and surface imperfections should be cleaned and filled in an approved manner before painting.
true
Any surfaces to be coated should be rendered dust-free prior to the application of the prime coat.
true
Blast cleaning is a method of surface preparation in which abrasive particles are directed at high velocity against a metal surface.
true
Blasting operations should never be allowed in the vicinity of painting work, near wet paint, anywhere that blast abrasive, grit or fallout could impinge on a freshly painted surface, or on any uncovered primed surface.
true
Cold rinsing, final (hot) rinsing, and preparing metal for painting are post-pickling treatments for metal.
true
Containers that have been previously opened should be used first.
true
Excessive pressure should not be applied to the brush.
true
Fabrication should preferably be complete before surface preparation begins.
true
Flame cleaning of high-strength friction grip bolted joints is totally prohibited.
true
Hand cleaning is acceptable only for spot cleaning, and power tool cleaning is acceptable where blast cleaning is impractical or not economical.
true
Heavier coatings are usually used, and because of the lower degree of control given by the airless spray gun and the high paint flow rate, greater resistance to sagging and tearing is required from the paint.
true
Impact cleaning tools are characterized by chipping and scaling hammers. With these tools, a chisel is struck by an internal piston and strikes the work surface.
true
Impact cleaning tools, rotary cleaning tools, and rotary impact cleaning tools are the three basic families of power tool cleaning.
true
In flame cleaning at a high temperature, oxyacetylene flame is passed over the surface to be cleaned.
true
In flame cleaning, the effect of the heat is to remove scale and rust, partly by differential expansion and partly by evolution of steam from moisture in the rust.
true
Manual cleaning is the method of preparing the surface of metals using hand or powered tools, such as wire brushes, chipping hammers, chisels, scrapers, and vibratory needle guns.
true
Methods of surface preparation include degreasing, pickling, manual cleaning, flame cleaning, and blasting.
true
Mixing in open containers should be done in a well-ventilated area, away from sparks or flames.
true
Moisture, oil, grease, corrosion products, dirt, and mill scale are typical contaminants that should be removed during surface preparation.
true
Paint life depends primarily on surface preparation.
true
Paint must never be allowed to dry in the gun.
true
Paint systems are generally specified by the dry film thickness (DFT) of coats and the total DFT of primer, intermediate, and top coat, rather than by the number of coats.
true