Ethereum: General Blockchain Concepts
Merkle Root Hash
A Merkle tree, in the most general sense, is a way of hashing a large number of "chunks" of data together which relies on splitting the chunks into buckets, where each bucket contains only a few chunks, then taking the hash of each bucket and repeating the same process, continuing to do so until the total number of hashes remaining becomes only one: the root hash.
Block
A block is a package of data that contains zero or more transactions, the hash of the previous block ("parent"), and optionally other data. The total set of blocks, with every block except for the initial "genesis block" containing the hash of its parent, is called the blockchain and contains the entire transaction history of a network. Note that some blockchain-based cryptocurrencies use the word "ledger" instead of blockchain; the two are roughly equivalent, although in systems that use the term "ledger" each block generally contains a full copy of the current state (e.g. currency balances, partially fulfilled contracts, registrations) of every account allowing users to discard outdated historical data. Why blocks? One major obstacle to overcome in distributed ledger systems is what, in Bitcoin terms, is called a "double-spend attack": What happens if two transactions exist in the network that both want to empty an account, a so-called conflict? The abstract answer to this is that you do not have to care. An order of the transactions will be selected for you, the transactions will be bundled into what is called a "block" and then they will be executed and distributed among all participating nodes. If two transactions contradict each other, the one that ends up being second will be rejected and not become part of the block. These blocks form a linear sequence in time and that is where the word "blockchain" derives from. Blocks are added to the chain in rather regular intervals - for Ethereum this is roughly every 17 seconds. As part of the "order selection mechanism" (which is called "mining") it may happen that blocks are reverted from time to time, but only at the "tip" of the chain. The more blocks that are added on top, the less likely it is. So it might be that your transactions are reverted and even removed from the blockchain, but the longer you wait, the less likely it will be.
Blockchain
A blockchain is a globally shared, transactional database or ledger. This means that everyone can read entries in the database just by participating in the network. If you want to change something in the database, you have to create a transaction which has to be accepted by all others. When a transaction is applied to the database, no other transaction can alter it. Blockchains are typically decentralized and distributed across multiple nodes.
Side Chain
A blockchain that branches off a main blockchain and checks in periodically with the main blockchain. Besides that it runs independently from the main chain, and any security compromises in the sidechain will not affect the main chain.
Consortium Blockchain
A consortium blockchain is a blockchain where the consensus process is controlled by a pre-selected set of nodes; for example, one might imagine a consortium of 15 financial institutions, each of which operates a node and of which 10 must sign every block in order for the block to be valid. The right to read the blockchain may be public, or restricted to the participants, and there are also hybrid routes such as the root hashes of the blocks being public together with an API that allows members of the public to make a limited number of queries and get back cryptographic proofs of some parts of the blockchain state. These blockchains may be considered "partially decentralized".
Cryptographic Hash Function
A cryptographic hash function is a special class of hash function that has certain properties which make it suitable for use in cryptography. It is a mathematical algorithm that maps data of arbitrary size to a bit string of a fixed size (a hash function) which is designed to also be a one-way function, that is, a function which is infeasible to invert. The only way to recreate the input data from an ideal cryptographic hash function's output is to attempt a brute-force search of possible inputs to see if they produce a match, or use a rainbow table of matched hashes.
dAPP
A dapp is a service that enables direct interaction between end users and providers (e.g. connecting buyers and sellers in some marketplace, owners and storers in file storage). Ethereum dapps typically interface users via an HTML/Javascript web application using a Javascript API to communicate with the blockchain. Dapps would typically have their own suite of associated contracts on the blockchain which they use to encode business logic and allow persistent storage of their consensus-critical state. Remember that because of the redundant nature of computation on the Ethereum network, the gas costs of execution will always be higher than private execution offchain. This incentivizes dapp developers to restrict the amount of code they execute and amount of data they store on the blockchain.
Distributed Hash Table
A distributed hash table (DHT) is a class of a decentralized distributed system that provides a lookup service similar to a hash table: (key, value) pairs are stored in a DHT, and any participating node can efficiently retrieve the value associated with a given key.
Private Blockchain
A fully private blockchain is a blockchain where write permissions are kept centralized to one organization. Read permissions may be public or restricted to an arbitrary extent. Likely applications include database management, auditing, etc internal to a single company, and so public readability may not be necessary in many cases at all, though in other cases public auditability is desired.
selfdestruct
A global variable in the Solidity language that allows you to "destroy the current contract, sending its funds to the given address". selfdestruct acts as an alias to the deprecated suicide terminology in accordance with EIP 6 - Renaming SUICIDE OPCODE. It frees up space on the blockchain and prevents future execution of the contract. The contract's address will still persist, but ether sent to it will be lost forever. The possibility to kill a contract has to be implemented by the contract creator him/herself using the Solidity selfdestruct function.
Testnet
A mirror network of the production Ethereum network that is meant for testing. Morden is the first Ethereum alternative testnet. It is expected to continue throughout the Frontier and Homestead era.
Public Blockchain
A public blockchain is a blockchain that anyone in the world can read, anyone in the world can send transactions to and expect to see them included if they are valid, and anyone in the world can participate in the consensus process - the process for determining what blocks get added to the chain and what the current state is. As a substitute for centralized or quasi-centralized trust, public blockchains are secured by cryptoeconomics - the combination of economic incentives and cryptographic verification using mechanisms such as proof of work or proof of stake, following a general principle that the degree to which someone can have an influence in the consensus process is proportional to the quantity of economic resources that they can bring to bear. These blockchains are generally considered to be "fully decentralized".
Oracle
A smart contract cannot access an external environment or another contract's storage. Oracles solve this problem by watching the blockchain for events and responding to them by publishing the results of a query back to the contract. In this way, contracts can interact with the off-chain world. The main challenge with oracles is that people need to trust these sources of information. Whether a website or a sensor, the source of information needs to be trustworthy. Different trusted computing techniques can be used as a way of solving these issues. Companies such as Oracalize, for example, use Amazon TLSNotary-based authenticity proofs and Android proofs.
Transactions
A transaction is a signed data package that stores a message to be sent from an externally owned account to another account on the blockchain. A transaction is always cryptographically signed by the sender (creator). This makes it straightforward to guard access to specific modifications of the database. In the example of electronic currency, a simple check ensures that only the person holding the keys to the account can transfer money from it. Transactions contain: the recipient of the message, a signature identifying the sender and proving their intention to send the message via the blockchain to the recipient, VALUE field - The amount of wei to transfer from the sender to the recipient, an optional data field, which can contain the message sent to a contract, a STARTGAS value, representing the maximum number of computational steps the transaction execution is allowed to take, a GASPRICE value, representing the fee the sender is willing to pay for gas. One unit of gas corresponds to the execution of one atomic instruction, i.e., a computational step.
gasPrice
A user constructs and signs a transaction, and each user may specify whatever gasPrice they desire, which can be zero. However, the Ethereum clients launched at Frontier had a default gasPrice of 0.05e12 wei. As miners optimize for their revenue, if most transactions are being submitted with a gasPrice of 0.05e12 wei, it would be difficult to convince a miner to accept a transaction that specified a lower, or zero, gasPrice.
Wallet
A wallet, in the most generic sense, refers to anything that can store ether or any other crypto token. In the crypto space in general, the term wallet is used to mean anything from a single private/public key pair (like a single paper wallet) all the way to applications that manage multiple key pairs, like the Mist Ethereum wallet.
Contract Account
Accounts play a central role in Ethereum. There are two types of accounts: externally owned accounts (EOAs) and contract accounts. A contract has an ether balance, has associated code, code execution is triggered by transactions or messages (calls) received from other contracts. when executed - perform operations of arbitrary complexity (Turing completeness) - manipulate its own persistent storage, i.e., can have its own permanent state - can call other contracts All action on the Ethereum block chain is set in motion by transactions fired from externally owned accounts. Every time a contract account receives a transaction, its code is executed as instructed by the input parameters sent as part of the transaction. The contract code is executed by the Ethereum Virtual Machine on each node participating in the network as part of their verification of new blocks.
Externally Owned Accounts
Accounts play a central role in Ethereum. There are two types of accounts: externally owned accounts (EOAs) and contract accounts. Externally owned accounts represent identities of external agents (e.g., human personas, mining nodes or automated agents). Accounts use public key cryptography to sign transactions so that the EVM can securely validate the identity of a transaction sender. An externally controlled account has an ether balance, can send transactions (ether transfer or trigger contract code), is controlled by private keys, has no associated code.
Address
An Ethereum address represents an account. For EOA, the address is derived as the last 20 bytes of the public key controlling the account, e.g., cd2a3d9f938e13cd947ec05abc7fe734df8dd826. This is a hexadecimal format (base 16 notation), which is often indicated explicitly by appending 0x to the address. Web3.js and console functions accept addresses with or without this prefix but for transparency we encourage their use. Since each byte of the address is represented by 2 hex characters, a prefixed address is 42 characters long. Several apps and APIs are also meant to implement the new checksum-enabled address scheme introduced in the Mist Ethereum wallet as of version 0.5.0.
Ethereum RPC Interface
An Ethereum node offers a RPC interface. This interface gives Ðapp's access to the Ethereum blockchain and functionality that the node provides, such as compiling smart contract code. It uses a subset of the JSON-RPC 2.0 specification (no support for notifications or named parameters) as serialisation protocol and is available over HTTP and IPC (unix domain sockets on linux/OSX and named pipe's on Windows).
Uncles
An uncle is a referred to as a network block which would normally be considered an orphan. Bitcoin users are well aware of how some blocks are orphaned because they were mined just after someone found the correct block header. Uncles work in a similar way, but there is a major difference. Miners on the Ethereum network are incentivized to include a number of uncles every time a block is mined. This may sound very strange at first, as it allows "orphaned" blocks to still yield a reward for miners. This is another example of how Ethereum is very different from Bitcoin. In Bitcoin mining, an uncle would yield nothing.
CASPER
Casper is a security-deposit based economic consensus protocol. This means that nodes, so called "bonded validators", have to place a security deposit (an action we call "bonding") in order to serve the consensus by producing blocks. If a validator produces anything that Casper considers "invalid", the deposit is forfeited along with the privilege of participating in the consensus process.
Hexadecimal
Common representation format for byte sequencing. Its advantage is that values are represented in a compact format using two characters per byte (the characters [0-9][a-f]).
Contract Compilation
Compilation is the process a computer takes to convert a high-level programming language into a machine language that the computer can understand. Compilation of solidity contracts can be accomplished via a number of compilation mechanisms. The compiler output for one source will give you contract objects each representing a single contract. The actual return value of eth.compile.solidity is a map of contract name to contract object pairs. Since our contract's name is test, eth.compile.solidity(source).test will give you the contract object for the test contract containing the following fields: code The compiled EVM bytecode info Additional metadata output from the compiler source The source code language The contract language (Solidity) languageVersion The contract language version compilerVersion The solidity compiler version that was used to compile this contract. abiDefinition The Application Binary Interface Definition userDoc The NatSpec Doc for users. developerDoc The NatSpec Doc for developers.
Log Event
Contracts are triggered by transactions executed as part of the block verification. If conceived of as a function call, contract execution is asynchronous, and therefore they have no return value. Instead contracts communicate to the outside world with log events. The log events are part of the transaction receipt which is produced when the transaction is executed. The receipts are stored in the receipt trie, the integrity of which is guaranteed by the fact that the current root of the receipt trie is part of the block header alongside the roots of state and state-trie. In a broad sense from the external perspective receipts are part of the Ethereum system state except that they are not readable contracts internally.
Message
Contracts have the ability to send "messages" to other contracts. Messages are virtual objects that are never serialized and exist only in the Ethereum execution environment. They can be conceived of as function calls. A message contains: the sender of the message (implicit). the recipient of the message VALUE field - The amount of wei to transfer alongside the message to the contract address, an optional data field, that is the actual input data to the contract a STARTGAS value, which limits the maximum amount of gas the code execution triggered by the message can incur. Essentially, a message is like a transaction, except it is produced by a contract and not an external actor. A message is produced when a contract currently executing code executes the CALL or DELEGATECALL opcodes, which produces and executes a message. Like a transaction, a message leads to the recipient account running its code. Thus, contracts can have relationships with other contracts in exactly the same way that external actors can.
Ethereum Contract Language
Contracts live on the blockchain in an Ethereum-specific binary format (EVM bytecode) that is executed by the Ethereum Virtual Machine (EVM). However, contracts are typically written in a higher level language and then compiled using the EVM compiler into byte code to be deployed to the blockchain.
The DAG
DAG stands for Directed Acyclic Graph. In Ethereum, a DAG is created every epoch using a version of the Dagger-Hashimoto Algorithm combining Vitalik Buterin's Dagger algorithm and Thaddeus Dryja's Hashimoto algorithm. Vitalik: "Dagger, a memory-hard proof of work based on moderately connected directed acyclic graphs (DAGs, hence the name), which, while far from optimal, has much stronger memory-hardness properties than anything else in use today. Essentially, the Dagger algorithm works by creating a directed acyclic graph (the technical term for a tree where each node is allowed to have multiple parents) with ten levels including the root and a total of 225 - 1 values."
gasUsed
Each operation in the EVM was assigned a number of how much gas it consumes. gasUsed is the sum of all the gas for all the operations executed.
Elliptic Curve Cryptography
Elliptic-curve cryptography (ECC) is an approach to public-key cryptography based on the algebraic structure of elliptic curves over finite fields. ECC requires smaller keys compared to non-ECC cryptography (based on plain Galois fields) to provide equivalent security. Elliptic curves are applicable for key agreement, digital signatures, pseudo-random generators and other tasks. Indirectly, they can be used for encryption by combining the key agreement with a symmetric encryption scheme.
Encryption
Encryption is the conversion of electronic data into a form unreadable by anyone except the owner of the correct decryption key. It can further be described as a process by which a document (plaintext) is combined with a shorter string of data, called a key (e.g. c85ef7d79691fe79573b1a7064c19c1a9819ebdbd1faaab1a8ec92344438aaf4), to produce an output (ciphertext) which can be "decrypted" back into the original plaintext by someone else who has the key, but which is incomprehensible and computationally infeasible to decrypt for anyone who does not have the key.
Epoch
Epoch is the interval between each regeneration of the DAG used as seed by the PoW algorithm Ethash. The epoch in specified as 30000 blocks.
Ether
Ether is the name of the currency used within Ethereum. It is used to pay for computation within the EVM. This is done indirectly by purchasing gas for ether as explained in gas. Ethereum is unique in the realm of cryptocurrencies in that ether has utility value as a cryptofuel, commonly referred to as "gas". Beyond transaction fees, gas is a central part of every network request and requires the sender to pay for the computing resources consumed. The gas cost is dynamically calculated, based on the volume and complexity of the request and multiplied by the current gas price. Its value as a cryptofuel has the effect of increasing the stability and long-term demand for ether and Ethereum as a whole.
Ethereum Clients
Ethereum clients expose a number of methods over JSON-RPC for interacting with them from within an application. However, interacting directly over JSON-RPC passes on a number of burdens to the application developers, such as: JSON-RPC protocol implementation Binary format encoding/decoding for creating and interacting with smart contracts 256 bit numeric types Admin command support - e.g. create/manage addresses, sign transactions A number of libraries have been written to help address these issues, allowing application developers to focus on their applications, instead of the underlying plumbing to interact with Ethereum clients and the wider ecosystem.
Ether Denominations
Ethereum has a metric system of denominations used as units of ether. Each denomination has its own unique name (some bear the family name of seminal figures playing a role in evolution of computer science and cryptoeconomics). The smallest denomination aka base unit of ether is called Wei. Below is a list of the named denominations and their value in Wei. Following a common (although somewhat ambiguous) pattern, ether also designates a unit (of 1e18 or one quintillion Wei) of the currency. Note that the currency is not called Ethereum as many mistakenly think, nor is Ethereum a unit. Units | Wei Value | Wei: wei 1 wei 1 Kwei (babbage) 1e3 wei 1,000 Mwei (lovelace) 1e6 wei 1,000,000 Gwei (shannon) 1e9 wei 1,000,000,000 microether (szabo) 1e12 wei 1,000,000,000,000 milliether (finney) 1e15 wei 1,000,000,000,000,000 ether 1e18 wei 1,000,000,000,000,000,000
Proof of Work Mining
Ethereum, like all blockchain technologies, uses an incentive-driven model of security. Consensus is based on choosing the block with the highest total difficulty. Miners produce blocks which the others check for validity. Among other well-formedness criteria, a block is only valid if it contains proof of work (PoW) of a given difficulty. The Ethereum blockchain is in many ways similar to the Bitcoin blockchain, although it does have some differences. The main difference between Ethereum and Bitcoin with regard to the blockchain architecture is that, unlike Bitcoin, Ethereum blocks contain a copy of both the transaction list and the most recent state (the root hash of the merkle patricia trie encoding the state to be more precise). Aside from that, two other values, the block number and the difficulty, are also stored in the block. The proof of work algorithm used is called Ethash (a modified version of the Dagger-Hashimoto algorithm) and involves finding a nonce input to the algorithm so that the result is below a certain difficulty threshold. The point in PoW algorithms is that there is no better strategy to find such a nonce than enumerating the possibilities, while verification of a solution is trivial and cheap. Since outputs have a uniform distribution (as they are the result of the application of a hash function), we can guarantee that, on average, the time needed to find such a nonce depends on the difficulty threshold. This makes it possible to control the time of finding a new block just by manipulating the difficulty. Any node participating in the network can be a miner and their expected revenue from mining will be directly proportional to their (relative) mining power or hashrate, i.e., the number of nonces tried per second normalised by the total hashrate of the network.
Etherscan
Etherscan is The BlockExplorer for the Ethereum Blockchain. A BlockExplorer is basically a search engine that allows users to easily lookup, confirm and validate transactions that have taken place on the Ethereum Blockchain.
Keyfiles
Every account is defined by a pair of keys, a private key and public key. Accounts are indexed by their address which is derived from the public key by taking the last 20 bytes. Every private key/address pair is encoded in a keyfile. Keyfiles are JSON text files which you can open and view in any text editor. The critical component of the keyfile, your account's private key, is always encrypted, and it is encrypted with the password you enter when you create the account. Keyfiles are found in the keystore subdirectory of your Ethereum node's data directory. Make sure you backup your keyfiles regularly! See the section Backup and restore accounts for more information. Creating a key is tantamount to creating an account.
Gas
Gas is the name for the execution fee that senders of transactions need to pay for every operation made on an Ethereum blockchain. Gas is supposed to be the constant cost of network resources/utilisation. You want the real cost of sending a transaction to always be the same, so you can't really expect Gas to be issued, currencies in general are volatile. So instead, Ethereum issues Ether whose value is supposed to vary, but also implement a Gas Price in terms of Ether. If the price of ether goes up, the Gas Price in terms of ether should go down to keep the real cost of Gas the same. Gas has multiple associated terms with it: Gas Prices, Gas Cost, Gas Limit, and Gas Fees. The principle behind Gas is to have a stable value for how much a transaction or computation costs on the Ethereum network. Gas Cost is a static value for how much a computation costs in terms of Gas, and the intent is that the real value of the Gas never changes, so this cost should always stay stable over time. Gas Price is how much Gas costs in terms of another currency or token like Ether. To stabilise the value of gas, the Gas Price is a floating value such that if the cost of tokens or currency fluctuates, the Gas Price changes to keep the same real value. The Gas Price is set by the equilibrium price of how much users are willing to spend, and how much processing nodes are willing to accept. Gas Limit is the maximum amount of Gas that can be used per block, it is considered the maximum computational load, transaction volume, or block size of a block, and miners can slowly change this value over time. Gas Fee is effectively the amount of Gas needed to be paid to run a particular transaction or program (called a contract). The Gas Fees of a block can be used to imply the computational load, transaction volume, or size of a block. The gas fees are paid to the miners (or bonded contractors in PoS).
Geth
Geth is a multipurpose command line tool that runs a full Ethereum node implemented in Go. It offers three interfaces: the command line subcommands and options, a Json-rpc server and an interactive console.
GHOST
Greedy Heaviest-Observed Sub-Tree is an alternative chain-selection method that is designed to incentivize stale blocks (uncles) as well, thus reducing the incentive for pool mining. In GHOST, even the confirmation given by stale blocks to previous blocks are considered valid, and the miners of the stale blocks are also rewarded with a mining reward.
Homestead
Homestead is the second major version release of the Ethereum platform. Homestead includes several protocol changes and a networking change that makes possible further network upgrades: EIP-2 Main homestead hardfork changes; EIP-7 Hardfork EVM update (DELEGATECALL); EIP-8 devp2p forward compatibility.
Merkle Patricia Tree
Merkle Patricia trees provide a cryptographically authenticated data structure that can be used to store all (key, value) bindings. They are fully deterministic, meaning that a Patricia tree with the same (key,value) bindings is guaranteed to be exactly the same down to the last byte and therefore have the same root hash, provide O(log(n)) efficiency for inserts, lookups and deletes, and are much easier to understand and code than more complex comparison-based alternatives like red-black trees.
MetaMask
MetaMask is a browser plugin that allows users to make Ethereum transactions through regular websites. It facilitates the adoption of Ethereum because it bridges the gap between the user interfaces for Ethereum (eg. Mist browsers, Dapps) and the regular web (eg. Chrome, Firefox, websites). MetaMask injects a javascript library called web3.js into the namespace of each page your browser loads. web3.js is written by the Ethereum core team, and has functions that regular webpages can use to make read and write requests on the blockchain that are consistent with the existing protocol.
Mist
Mist is a Web3 browser that also includes an Ethereum Wallet. Ethereum Wallet and Mist share the same source repository (https://github.com/ethereum/mist). Mist is a wallet enabled browser, and "Ethereum Wallet" is Mist but with the browser capability disabled, so you can use it as a wallet.
Multisig
Multisignature (often called multisig) is a form of technology used to add additional security and for Ethereum transactions. Multisignature addresses require another user or users sign a transaction before it can be broadcast onto the block chain.
Nonce
Number Used Once or Number Once. A nonce, in information technology, is a number generated for a specific use, such as session authentication. Typically, a nonce is some value that varies with time, although a very large random number is sometimes used. In general usage, nonce means "for the immediate occasion" or "for now." In the case of Blockchain Proof of Work scenarios, the hash value, found by a Miner, matching the network's Difficulty thus proving the Block Validity is called Nonce as well.
Parity
Parity is an Ethereum client that runs in the browser. Parity is written from the ground-up for correctness-verifiability, modularisation, low-footprint and high-performance. It utilises the Rust language, a hybrid imperative/OO/functional language with an emphasis on efficiency. Parity comes with an extensive, in-built Ethereum Wallet and Dapp environment. It includes: Account, address-book and multi-sig management. Key creation, importing and exporting. Web3 Ðapp browser. Hardware and electronic cold-wallet support. Name registry support. Contract development, deployment and interaction environment.
Peer-to-Peer Computing
Peer-to-peer (P2P) computing or networking is a distributed application architecture that partitions tasks or workloads between peers. Peers are equally privileged, equipotent participants in the application. They are said to form a peer-to-peer network of nodes.
Proof of Stake
Proof of stake is a category of consensus algorithms for public blockchains, which Ethereum's upcoming Casper algorithm is a part of. It serves a similar function to proof of work, but has significant advantages in terms of security and energy efficiency. In general, a proof of stake algorithm works as follows. The blockchain keeps track of a set of validators, and anyone who holds the blockchain's base cryptocurrency (in Ethereum's case, ether) can become a validator by sending a special type of transaction that locks up their ether into a deposit. The process of creating and agreeing to new blocks is then done through a consensus algorithm that all current validators can participate in. There are many kinds of consensus algorithms, and many ways to assign rewards to validators who participate in the consensus algorithm, so there are many "flavors" of proof of stake. From an algorithmic perspective, there are two major types: chain-based proof of stake and BFT-style proof of stake. In chain-based proof of stake, the algorithm pseudo-randomly selects a validator during each time slot (eg. every period of 10 seconds might be a time slot), and assigns that validator the right to create a single block, and this block must point to some previous block (normally the block at the end of the previously longest chain), and so over time most blocks converge into a single constantly growing chain. In BFT-style proof of stake, validators are randomly assigned the right to propose blocks, but agreeing on which block is canonical is done through a multi-round process where every validator sends a "vote" for some specific block during each round, and at the end of the process all (honest and online) validators permanently agree on whether or not any given block is part of the chain. Note that blocks may still be chained together; the key difference is that consensus on a block can come within one block, and does not depend on the length or size of the chain after it.
Raiden Network
Raiden is an open source project that aims to scale Ethereum by using state channel technology. The Raiden Network is an off-chain transfer network for Ethereum ERC20 tokens. It provides a fast, scalable, and cheap alternative to on-chain token transfers. At the same time, the Raiden Network transfers provide users with guarantees of finality, security, and decentralization similar to those known from blockchains.
Remix
Remix is an IDE for the smart contract programming language Solidity and has an integrated debugger and testing environment.
Forwarding Contract
Serve as a sort of externally owned account with a more complicated access policy; this is called a "forwarding contract" and typically involves simply resending incoming messages to some desired destination only if certain conditions are met; for example, one can have a forwarding contract that waits until two out of a given three private keys have confirmed a particular message before resending it (ie. multisig). More complex forwarding contracts have different conditions based on the nature of the message sent; the simplest use case for this functionality is a withdrawal limit that is overrideable via some more complicated access procedure.
solc
Solc is the solidity commandline compiler. Using solc --help provides you with an explanation of all options. The compiler can produce various outputs, ranging from simple binaries and assembly over an abstract syntax tree (parse tree) to estimations of gas usage. If you only want to compile a single file, you run it as solc --bin sourceFile.sol and it will print the binary. Before you deploy your contract, activate the optimizer while compiling using solc --optimize --bin sourceFile.sol.
Ethereum Natural Specification Format (NatSpec)
Solidity contracts can have a special form of comments that form the basis of the Ethereum Natural Specification Format. Solidity implements smart comments doxygen-style, which then can be used to generate various facades/meta documents of the code. One such use case is to generate custom messages for transaction confirmation that clients can prompt users with.
State Channel
State channels are basically two-way pathways opened between two users that want to communicate with each other in the form of transactions. Each participant in the channel signs these transactions with his private key to ensure that they are undeniably true and authorized. These channels are off-chain and private, known only to its participants, which means they allow for instant and anonymous transactions within them. These channels also have a limited lifespan which is predetermined based on time or amount of transactions carried out. Participants can also close their channel by providing the last updated state of transactions to the blockchain. Once a channel closes, the transaction history within it can be uploaded into the blockchain in order for the final outcome to become official. Ethereum is a stateful blockchain. What this means is that within each block on the Ethereum blockchain, there is information regarding the entire state of it. This information includes all account balances, contract storage, contract code, etc. This contrasts with the UTXO model found in Bitcoin. However, this information takes up space meaning that nodes are forced to store large amounts of data. This state information is often not relevant to the final outcome of the blockchain, for example: If person A and B have a business relation, they can often times send each other tokens. Lets say that personA has 100 Ethers and person B has 50 Ethers. Now, within a month, personA sent personB 10 transactions of 5 ETH each and personB sent personA 2 transactions of 10 ETH each. The final outcome after a month will be that personA will have sent 30 ETH to the personB, which means personA will now have 70 ETH and personB will have 80 ETH. In a stateful network, these transactions will each count as an individual transaction (15 in total), taking up space on the blockchain. However, thanks to state channels, only the final outcome needs to be included in the form of one single transaction. Hence the value of state channels.
Ethereum Wallet
The Ethereum Wallet allows you to hold and secure ether and other crypto-assets built on Ethereum, as well as write, deploy and use smart contracts. Ethereum Wallet and Mist share the same source repository (https://github.com/ethereum/mist). Mist is a wallet enabled browser, and "Ethereum Wallet" is Mist but with the browser capability disabled, so you can use it as a wallet.
The Ethereum network
The basis for decentralised consensus is the peer-to-peer network of participating nodes which maintain and secure the blockchain.
Block Validation
The checking of the coherence of the cryptographic signature of the block with the history stored in the entire blockchain.
Block Header
The data in a block which is unique to its content and the circumstances in which it was created. It includes the hash of the previous block's header, the version of the software the block is mined with, the timestamp and the merkle root hash of the contents of the block.
Serenity
The fourth stage of Ethereum's release. This is when things are going to get fancy: the network is going to change its mining process from Proof-of-Work to Proof-of-Stake.
Genesis Block
The genesis block is the start of the blockchain - the first block, block 0, and the only block that does not point to a predecessor block. The protocol ensures that no other node will agree with your version of the blockchain unless they have the same genesis block.
Serialization and RLP
The process of converting a data structure into a sequence of bytes. Ethereum internally uses an encoding format called recursive-length prefix encoding (RLP). The purpose of RLP is to encode arbitrarily nested arrays of binary data, and RLP is the main encoding method used to serialize objects in Ethereum. The only purpose of RLP is to encode structure; encoding specific atomic data types (eg. strings, ints, floats) is left up to higher-order protocols; in Ethereum integers must be represented in big endian binary form with no leading zeroes (thus making the integer value zero be equivalent to the empty byte array).
Syncing
The process of downloading the entire blockchain. Fast sync: instead of processing the entire block-chain one link at a time, and replay all transactions that ever happened in history, fast syncing downloads the transaction receipts along the blocks, and pulls an entire recent state database.
Block Propagation
The process of transmitting a confirmed block to all other nodes in the network.
sharding (in the context of blockchain)
The splitting of the space of possible accounts (contracts are accounts too) into subspaces, for example, based on first digits of their numerical addresses. This allows for contract executions to be executed within 'shards' instead of network wide, allowing for faster transactions and greater scalability.
Metropolis
The third stage of Ethereum's release. This is the stage when the user interfaces come out (e.g. Mist), including a dapp store, and non-technical users should feel comfortable joining at this point.
Truffle
Truffle is a development environment, testing framework and asset pipeline for Ethereum, aiming to make life as an Ethereum developer easier. With Truffle, you get: Built-in smart contract compilation, linking, deployment and binary management. Automated contract testing with Mocha and Chai. Configurable build pipeline with support for custom build processes. Scriptable deployment & migrations framework. Network management for deploying to many public & private networks. Interactive console for direct contract communication. Instant rebuilding of assets during development. External script runner that executes scripts within a Truffle environment.
Web3.js
Using the JSON-RPC interface can be tedious and error-prone, especially when dealing with the ABI. Web3.js is a javascript library that works on top of the Ethereum RPC interface. Its goal is to provide a more user friendly interface and reducing the chance for errors.
Execution Fee
When a contract is executed as a result of being triggered by a message or transaction, every instruction is executed on every node of the network. This has a cost: for every executed operation there is a specified execution fee, expressed in a number of gas units. Gas is the name for the execution fee that senders of transactions need to pay for every operation made on an Ethereum blockchain. The name gas is inspired by the view that this fee acts as cryptofuel, driving the motion of smart contracts. Gas is purchased for ether from the miners that execute the code. Gas and ether are decoupled deliberately since units of gas align with computation units having a natural cost, while the price of ether generally fluctuates as a result of market forces.
Connecting to the Network
You can connect to the network using Geth. Geth is a multipurpose command line tool that runs a full Ethereum node implemented in Go. It offers three interfaces: the command line subcommands and options, a Json-rpc server and an interactive console. Geth continuously attempts to connect to other nodes on the network until it has peers. If you have UPnP enabled on your router or run Ethereum on an Internet-facing server, it will also accept connections from other nodes. Geth finds peers through something called the discovery protocol. In the discovery protocol, nodes are gossipping with each other to find out about other nodes on the network. In order to get going initially, geth uses a set of bootstrap nodes whose endpoints are recorded in the source code.
